EN 14654-1:2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Management and control of operational activities in drain and sewer systems outside buildings - Part 1: Cleaning
01-30-2021
06-18-2014
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General
5 Cleaning plan
6 Preparation of cleaning programme
7 Preparation of the project specification
8 Implementation of projects
9 Measurement of conformity
10 Review of programme and plan
Annex A (informative) - Example of cleaning report form
Annex B (informative) - Cleaning methods
Bibliography
This European Standard establishes the general principles for the management and control of operational activities in drain and sewer systems outside buildings and specifies requirements for development and implementation of work programmes, and the selection of techniques. This European Standard covers the management and control of cleaning.It is applicable to drain and sewer systems, which operate essentially under gravity, from the point where wastewater leaves a building, roof drainage system, or paved area, to the point where it is discharged into a treatment works or receiving water body. Drains and sewers below buildings are included provided that they do not form part of the drainage system of the building.
| Committee |
CEN/TC 165
|
| DevelopmentNote |
Supersedes PREN 14654-1. (06/2014)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| UNI EN 14654-1 : 2014 | Identical |
| DIN EN 14654-1:2014-08 | Identical |
| BS EN 14654-1:2014 | Identical |
| PN EN 14654-1 : 2014 | Identical |
| SN EN 14654-1 : 2014 | Identical |
| NBN EN 14654-1 : 2014 | Identical |
| NEN EN 14654-1 : 2014 | Identical |
| UNE-EN 14654-1:2015 | Identical |
| I.S. EN 14654-1:2014 | Identical |
| NF EN 14654-1 : 2014 | Identical |
| NS EN 14654-1 : 2014 | Identical |
| ONORM EN 14654-1 : 2014 | Identical |
| DIN EN 14654-1:2019-05 (Draft) | Identical |
| DIN EN 16506 E : 2014 | SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
| DIN EN 16506:2014-12 | SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
| BS EN 16323:2014 | Glossary of wastewater engineering terms |
| DIN EN 14654-2:2013-03 | Management and control of operational activities in drain and sewer systems outside buildings - Part 2: Rehabilitation |
| 15/30327642 DC : 0 | BS EN 13476-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1: GENERAL REQUIREMENTS AND PERFORMANCE CHARACTERISTICS |
| 16/30300273 DC : 0 | BS ISO 24516-3 - GUIDELINES FOR MANAGEMENT OF ASSETS OF WATER SUPPLY AND WASTEWATER SYSTEMS - PART 3: WASTEWATER COLLECTION NETWORKS |
| BS ISO 24516-3:2017 | Guidelines for the management of assets of water supply and wastewater systems Wastewater collection networks |
| I.S. EN 16323:2014 | GLOSSARY OF WASTEWATER ENGINEERING TERMS |
| I.S. EN 14654-2:2013 | MANAGEMENT AND CONTROL OF OPERATIONAL ACTIVITIES IN DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - PART 2: REHABILITATION |
| PREN 752 : DRAFT 2015 | DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - SEWER SYSTEM MANAGEMENT |
| DIN EN 752:2015-10 (Draft) | DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - SEWER SYSTEM MANAGEMENT |
| EN 14654-2:2013 | Management and control of operational activities in drain and sewer systems outside buildings - Part 2: Rehabilitation |
| 11/30250267 DC : 0 | BS EN 16323 - GLOSSARY OF WASTEWATER ENGINEERING TERMS |
| BS EN 16506:2014 | Systems for renovation of drains and sewers. Lining with a rigidly anchored plastics inner layer (RAPL) |
| UNI EN 16506 : 2014 | SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
| BS EN 14654-2:2013 | Management and control of operational activities in drain and sewer systems outside buildings Rehabilitation |
| UNI EN 16323 : 2014 | GLOSSARY OF WASTEWATER ENGINEERING TERMS |
| DIN EN 13476-1:2015-11 (Draft) | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1: GENERAL REQUIREMENTS AND PERFORMANCE CHARACTERISTICS |
| EN 16506:2014 | Systems for renovation of drains and sewers - Lining with a rigidly anchored plastics inner layer (RAPL) |
| DIN EN 16323:2014-07 | GLOSSARY OF WASTEWATER ENGINEERING TERMS |
| I.S. EN 752:2017 | DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - SEWER SYSTEM MANAGEMENT |
| 10/30231796 DC : 0 | BS EN 14654-2 - MANAGEMENT AND CONTROL OF CLEANING OPERATIONS IN DRAINS AND SEWERS - PART 2: REHABILITATION |
| 15/30325882 DC : 0 | BS EN 16932-1 - DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - PUMPING SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| BS EN 13476-1:2007 | Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) General requirements and performance characteristics |
| PREN 13476-1 : DRAFT 2015 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYLSEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL - PART 1: GENERAL REQUIREMENTS AND PERFORMANCE CHARACTERISTICS |
| EN 13476-1:2018 | Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1:General requirements and performance characteristics |
| EN 752:2017 | Drain and sewer systems outside buildings - Sewer system management |
| EN 16323:2014 | Glossary of wastewater engineering terms |
| I.S. EN 13476-1:2007 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY (VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1: GENERAL REQUIREMENTS AND PERFORMANCE CHARACTERISTICS |
| UNE-EN 16506:2015 | Systems for renovation of drains and sewers - Lining with a rigidly anchored plastics inner layer (RAPL) |
| I.S. EN 16506:2014 | SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
| ISO 24516-3:2017 | Guidelines for the management of assets of water supply and wastewater systems — Part 3: Wastewater collection networks |
| UNE-EN 16323:2014 | Glossary of wastewater engineering terms |
| DWA-A 199-3 : 2007 | SERVICE AND OPERATING INSTRUCTIONS FOR THE PERSONNEL OF WASTE-WATER SYSTEMS - PART 3: OPERATING INSTRUCTIONS FOR THE PERSONNEL OF WASTE-WATER PUMPING INSTALLATIONS |
| DWA-M 174 : 2005 | BETRIEBSAUFWAND FUER DIE KANALISATION - HINWEISE ZUM PERSONAL-, FAHRZEUG- UND GERAETEBEDARF |
| EN 13508-1:2012 | Investigation and assessment of drain and sewer systems outside buildings - Part 1: General Requirements |
| DWA-A 147 : 2017 | BETRIEBSAUFWAND FUER KOMMUNALE ENTWAESSERUNGSSYSTEME - BETRIEBSAUFGABEN UND HAEUFIGKEITEN |
| EN 16323:2014 | Glossary of wastewater engineering terms |
| DWA-A 199-2 : 2007 | SERVICE AND OPERATING INSTRUCTIONS FOR THE PERSONNEL OF WASTEWATER SYSTEMS - PART 2: OPERATING INSTRUCTIONS FOR THE PERSONNEL OF SEWERAGE SYSTEMS AND STORM-WATER TREATMENT SYSTEMS |
| EN 1829-2:2008/AC:2011 | HIGH-PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 2: HOSES, HOSE LINES AND CONNECTORS |
| ISO 14001:2015 | Environmental management systems — Requirements with guidance for use |
| EN 752:2017 | Drain and sewer systems outside buildings - Sewer system management |
| EN 1829-1:2010 | High pressure water jet machines - Safety requirements - Part 1: Machines |
| EN ISO 14001:2015 | Environmental management systems - Requirements with guidance for use (ISO 14001:2015) |
| EN 13508-2:2003+A1:2011 | Investigation and assessment of drain and sewer systems outside buildings - Part 2: Visual inspection coding system |
| ATV-DVWK-M 197 : 2004 | INVITATION TO TENDER FOR SEWER CLEANING SERVICES USING THE HIGH PRESSURE FLUSHING PROCESS |
| DWA-A 199-1 : 2011 | SERVICE AND OPERATING INSTRUCTIONS FOR THE PERSONNEL OF WASTEWATER SYSTEMS - PART 1: SERVICE INSTRUCTIONS FOR THE PERSONNEL OF WASTEWATER SYSTEMS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.