EN 15251:2007
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics
Superseded date
07-23-2013
Published date
05-16-2007
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Interactions with other standards
6 Design input criteria for dimensioning of
buildings, heating, cooling, mechanical
and natural ventilation systems
6.1 General
6.2 Thermal environment
6.3 Indoor air quality and ventilation rates
6.4 Humidity
6.5 Lighting
6.6 Noise
7 Indoor environment parameters for energy calculation
7.1 General
7.2 Thermal environment
7.3 Indoor air quality and ventilation
7.4 Humidity
7.5 Lighting
8 Evaluation of the indoor environment and long
term indicators
8.1 General
8.2 Design indicators
8.3 Calculated indicators of indoor environment
8.4 Measured indicators
8.5 Subjective evaluations
9 Inspections and measurement of the indoor environment
in existing buildings
9.1 General
9.2 Measurements
10 Classification and certification of the indoor
environment
10.1 General
10.2 Detailed classification and certification
10.3 Recommended overall evaluation of the indoor
environment and certification
Annex A (informative) Recommended criteria for the thermal
environment
A.1 Recommended categories for design of mechanical
heated and cooled buildings
A.2 Acceptable indoor temperatures for design of buildings
without mechanical cooling systems
A.3 Recommended indoor temperatures for energy calculations
Annex B (informative) Basis for the criteria for indoor air
quality and ventilation rates
B.1 Recommended design ventilation rates in non-residential
buildings
B.1.1 General
B.1.2 Method based on person and building component
B.1.3 Method based on ventilation rate per person or
per m[2] floor area
B.1.4 Recommended values of CO[2] for energy calculation
B.2 Recommended design ventilation rates in residential
buildings
B.3 Recommended criteria for dimensioning of humidification
and de-humidification
B.4 Recommended ventilation during un-occupied hours
Annex C (informative) Example on how to define low and very
low polluting buildings
Annex D (informative) Recommended criteria for lighting
Annex E (informative) Indoor system noise criteria of some
spaces and buildings
Annex F (informative) Long term evaluation of the general
thermal comfort conditions
Annex G (informative) Recommended criteria for acceptable
deviations
G.1 Building Category
G.2 Length of deviation
Annex H (informative) Methodologies for subjective evaluations
Annex I (informative) Examples of classification and
certification of the indoor Environment
I.1 The design criteria used
I.2 Whole year computer simulations of the indoor environment
and energy performance
I.3 Long term measurement of selected parameters for
the indoor environment
I.4 Subjective responses from occupants
Bibliography
-This European Standard specifies the indoor environmental parameters which have an impact on the energy performance of buildings. -The standard specifies how to establish indoor environmental input parameters for building system design and energy performance calculations. -The standard specifies methods for long term evaluation of the indoor environment obtained as a result of calculations or measurements. -The standard specifies criteria for measurements which can be used if required to measure compliance by inspection.-The standard identifies parameters to be used by monitoring and displaying the indoor environment in existing buildings.-This standard is applicable mainly in non-industrial buildings where the criteria for indoor environment are set by human occupancy and where the production or process does not have a major impact on indoor environment. The standard is thus applicable to the following building types: single family houses, apartment buildings, offices, educational buildings, hospitals, hotels and restaurants, sports facilities, wholesale and retail trade service buildings. -The standard specifies how different categories of criteria for the indoor environment can be used. But does not require certain criteria to be used. This is up to national regulations or individual project specifications.-The recommended criteria in this standard can also be used in national calculation methods, which may be different to the methods referred to here.-The standard does not prescribe design methods, but give input parameters to the design of buildings, heating, cooling, ventilation and lighting systems.The standard does not include criteria for local discomfort factors like draught, radiant temperature asymmetry, vertical air temperature differences and floor surface temperatures.
| Committee |
CEN/TC 156
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| UNE-EN 15251:2008 | Identical |
| NF EN 15251 : 2007 | Identical |
| BS EN 15251:2007 | Identical |
| DIN EN 15251 E : 2012 | Identical |
| PN EN 15251 : 2012 | Identical |
| I.S. EN 15251:2007 | Identical |
| DIN EN 15251:2012-12 | Identical |
| UNI EN 15251 : 2008 | Identical |
| SN EN 15251 : 2007 | Identical |
| NEN EN 15251 : 2007 | Identical |
| NS EN 15251 : 2007 + NA 2014 | Identical |
| NBN EN 15251 : 2007 | Identical |
| BS EN 15643-3:2012 | Sustainability of construction works. Assessment of buildings Framework for the assessment of social performance |
| 15/30325699 DC : 0 | BS EN ISO 52000-1 - ENERGY PERFORMANCE OF BUILDINGS - OVERARCHING EPB ASSESSMENT - PART 1: GENERAL FRAMEWORK AND PROCEDURES |
| DIN EN 15726 E : 2011 | VENTILATION FOR BUILDINGS - AIR DIFFUSION - MEASUREMENTS IN THE OCCUPIED ZONE OF AIR-CONDITIONED/VENTILATED ROOMS TO EVALUATE THERMAL AND ACOUSTIC CONDITIONS |
| 15/30322689 DC : 0 | BS EN 16883 - CONSERVATION OF CULTURAL HERITAGE - GUIDELINES FOR IMPROVING THE ENERGY PERFORMANCE OF HISTORIC BUILDINGS |
| I.S. EN 13779:2007 | VENTILATION FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS |
| DIN EN ISO 28802:2012-06 | Ergonomics of the physical environment - Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people (ISO 28802:2012) |
| 10/30191968 DC : 0 | BS ISO 28803 - ERGONOMICS OF THE PHYSICAL ENVIRONMENT - APPLICATION OF INTERNATIONAL STANDARDS TO PEOPLE WITH SPECIAL REQUIREMENTS |
| BS EN 16627:2015 | Sustainability of construction works. Assessment of economic performance of buildings. Calculation methods |
| BS EN ISO 11855-4:2015 | Building environment design. Design, dimensioning, installation and control of embedded radiant heating and cooling systems Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) |
| I.S. EN 15978:2011 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF ENVIRONMENTAL PERFORMANCE OF BUILDINGS - CALCULATION METHOD |
| DIN EN 16883:2015-07 (Draft) | CONSERVATION OF CULTURAL HERITAGE - GUIDELINES FOR IMPROVING THE ENERGY PERFORMANCE OF HISTORIC BUILDINGS |
| DIN EN 15643-1:2010-12 | Sustainability of construction works - Sustainability assessment of buildings - Part 1: General framework |
| BS EN ISO 28803:2012 | Ergonomics of the physical environment. Application of international standards to people with special requirements |
| DIN EN 15243:2007-10 | VENTILATION FOR BUILDINGS - CALCULATION OF ROOM TEMPERATURES AND OF LOAD AND ENERGY FOR BUILDINGS WITH ROOM CONDITIONING SYSTEMS |
| BS EN 15242:2007 | Ventilation for buildings. Calculation methods for the determination of air flow rates in buildings including infiltration |
| DIN EN 15243 E : 2007 | VENTILATION FOR BUILDINGS - CALCULATION OF ROOM TEMPERATURES AND OF LOAD AND ENERGY FOR BUILDINGS WITH ROOM CONDITIONING SYSTEMS |
| 13/30265379 DC : 0 | BS EN 16627 - SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF ECONOMIC PERFORMANCE OF BUILDINGS - CALCULATION METHODS |
| DIN EN 15643-4:2012-04 | Sustainability of construction works - Assessment of buildings - Part 4: Framework for the assessment of economic performance |
| UNE-EN ISO 11855-4:2016 | Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) (ISO 11855-4:2012) |
| UNE-EN 16627:2016 | Sustainability of construction works - Assessment of economic performance of buildings - Calculation methods |
| EN 15643-3:2012 | Sustainability of construction works - Assessment of buildings - Part 3: Framework for the assessment of social performance |
| EN 15643-1:2010 | Sustainability of construction works - Sustainability assessment of buildings - Part 1: General framework |
| UNI EN ISO 28802 : 2012 | ERGONOMICS OF THE PHYSICAL ENVIRONMENT - ASSESSMENT OF ENVIRONMENTS BY MEANS OF AN ENVIRONMENTAL SURVEY INVOLVING PHYSICAL MEASUREMENTS OF THE ENVIRONMENT AND SUBJECTIVE RESPONSES OF PEOPLE |
| BS EN 12599:2012 | Ventilation for buildings. Test procedures and measurement methods to hand over air conditioning and ventilation systems |
| EN 12599:2012 | Ventilation for buildings - Test procedures and measurement methods to hand over air conditioning and ventilation systems |
| VDI 6022 Blatt 1.1:2012-08 | Ventilation and indoor-air quality - Hygiene requirements for ventilation and air-conditioning systems and units - Checking of ventilation and air-conditioning systems (VDI Ventilation Code of Practice) |
| VDI 6022 Blatt 1.2:2014-06 | Ventilation and indoor-air quality - Hygiene requirements for ventilation and air-conditioning systems and units - Requirements for underground components (VDI Ventilation Code of Practice) |
| VDI 6035:2009-09 | Ventilation and air-conditioning technology - Decentralized ventilation systems - Wall-mounted air-conditioners (VDI ventilation code of practice) |
| UNI EN 16309 : 2014-10 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY |
| BS EN 15243:2007 | Ventilation for buildings. Calculation of room temperatures and of load and energy for buildings with room conditioning systems |
| BS EN 16247-2:2014 | Energy audits Buildings |
| BS EN 15643-1:2010 | Sustainability of construction works. Sustainability assessment of buildings General framework |
| UNI EN 15643-4 : 2012 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 4: FRAMEWORK FOR THE ASSESSMENT OF ECONOMIC PERFORMANCE |
| 15/30297468 DC : 0 | BS EN 16798-3 - ENERGY PERFORMANCE OF BUILDINGS - PART 3: VENTILATION FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS |
| DIN EN 15978:2012-10 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF ENVIRONMENTAL PERFORMANCE OF BUILDINGS - CALCULATION METHOD |
| 10/30197172 DC : 0 | BS ISO 11855-4 - BUILDING ENVIRONMENT DESIGN - DESIGN, CONSTRUCTION AND OPERATION OF RADIANT HEATING AND COOLING SYSTEMS - PART 4: DIMENSIONING AND CALCULATION OF THE DYNAMIC HEATING AND COOLING CAPACITY FOR THERMO ACTIVE BUILDING SYSTEMS (TABS) |
| DIN EN 15643-3:2012-04 | Sustainability of construction works - Assessment of buildings - Part 3: Framework for the assessment of social performance |
| I.S. EN ISO 28803:2012 | ERGONOMICS OF THE PHYSICAL ENVIRONMENT - APPLICATION OF INTERNATIONAL STANDARDS TO PEOPLE WITH SPECIAL REQUIREMENTS (ISO 28803:2012) |
| 14/30311502 DC : 0 | BS EN 15378-3 - HEATING SYSTEMS AND WATER BASED COOLING SYSTEMS IN BUILDINGS - HEATING SYSTEMS AND DHW IN BUILDINGS - PART 3: MEASURED ENERGY PERFORMANCE |
| 14/30292857 DC : 0 | BS EN 15193-1 - ENERGY PERFORMANCE OF BUILDINGS - MODULE M9 - ENERGY REQUIREMENTS FOR LIGHTING - PART 1: SPECIFICATIONS |
| UNI EN 15978 : 2011 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF ENVIRONMENTAL PERFORMANCE OF BUILDINGS - CALCULATION METHOD |
| BS EN 16883:2017 | Conservation of cultural heritage. Guidelines for improving the energy performance of historic buildings |
| PREN 12599 : DRAFT 2010 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
| I.S. EN 15243:2007 | VENTILATION FOR BUILDINGS - CALCULATION OF ROOM TEMPERATURES AND OF LOAD AND ENERGY FOR BUILDINGS WITH ROOM CONDITIONING SYSTEMS |
| EN 15643-2:2011 | Sustainability of construction works - Assessment of buildings - Part 2: Framework for the assessment of environmental performance |
| I.S. EN 15726:2011 | VENTILATION FOR BUILDINGS - AIR DIFFUSION - MEASUREMENTS IN THE OCCUPIED ZONE OF AIR-CONDITIONED/VENTILATED ROOMS TO EVALUATE THERMAL AND ACOUSTIC CONDITIONS |
| EN 15643-4:2012 | Sustainability of construction works - Assessment of buildings - Part 4: Framework for the assessment of economic performance |
| UNI EN 15643-2 : 2011 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 2: FRAMEWORK FOR THE ASSESSMENT OF ENVIRONMENTAL PERFORMANCE |
| UNE-EN 15726:2012 | Ventilation for buildings - Air diffusion - Measurements in the occupied zone of air-conditioned/ventilated rooms to evaluate thermal and acoustic conditions |
| I.S. EN ISO 28802:2012 | ERGONOMICS OF THE PHYSICAL ENVIRONMENT - ASSESSMENT OF ENVIRONMENTS BY MEANS OF AN ENVIRONMENTAL SURVEY INVOLVING PHYSICAL MEASUREMENTS OF THE ENVIRONMENT AND SUBJECTIVE RESPONSES OF PEOPLE (ISO 28802:2012) |
| I.S. EN 16247-2:2014 | ENERGY AUDITS - PART 2: BUILDINGS |
| I.S. EN 16627:2015 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF ECONOMIC PERFORMANCE OF BUILDINGS - CALCULATION METHODS |
| I.S. EN 15759-2:2018 | CONSERVATION OF CULTURAL HERITAGE - INDOOR CLIMATE - PART 2: VENTILATION MANAGEMENT FOR THE PROTECTION OF CULTURAL HERITAGE BUILDINGS AND COLLECTIONS |
| I.S. EN 16309:2014 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY |
| I.S. EN 12599:2012 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
| DIN EN ISO 13790:2008-09 | ENERGY PERFORMANCE OF BUILDINGS - CALCULATION OF ENERGY USE FOR SPACE HEATING AND COOLING |
| VDI 6040 Blatt 1:2011-06 | Air-conditioning - Schools - Requirements (VDI Ventilation Code of Practice, VDI Code of Practice for School Buildings) |
| VDI 4700 Blatt 3:2015-05 | Terminology of civil engineering and building services - Symbols (building services) |
| VDI 3803 Blatt 4:2012-09 | Air-conditioning, system requirements - Air filter systems (VDI Ventilation Code of Practice) |
| VDI 6014:2016-12 | Energy conservation by application of variable speed drives (VSD) in building services |
| VDI 2050 Blatt 4:2011-11 | Requirements for mechanical equipment rooms - Ventilation and air-conditioning |
| VDI 3811:2016-07 | Refurbishment of heating installations |
| VDI 6040 Blatt 2:2015-09 | Air-conditioning - Schools - Practical guidance (VDI Ventilation Code of Practice, VDI Code of Practice for School Buildings) |
| VDI 3804:2009-03 | Air-conditioning - Office buildings (VDI ventilation code of practice) |
| VDI 6034:2017-08 | Cooling surfaces for rooms - Planning, installation and operation |
| VDI 3810 Blatt 4:2013-12 | Operating and maintenance of buildings and building installations - Ventilating and air-conditioning installations |
| VDI 6032 Blatt 1:2015-05 | Ventilation and indoor-air quality in vehicles - Hygiene requirements for ventilation and air-conditioning systems |
| VDI 6011 Blatt 1:2016-07 | Lighting technology - Optimisation of daylight use and artificial lighting - Fundamentals and basic requirements |
| VDI 3803-1 : 2010 COR 2010 | AIR-CONDITIONING - CENTRAL AIR-CONDITIONING SYSTEMS - STRUCTURAL AND TECHNICAL PRINCIPLES (VDI VENTILATION CODE OF PRACTICE) |
| VDI 2053 Blatt 1:2014-12 | Air conditioning - Car parks - Exhaust ventilation (VDI Ventilation Code of Practice) |
| VDI 2089 Blatt 2:2009-08 | Building services in swimming baths - Efficient use of energy and water |
| VDI 3803 Blatt 5:2013-04 | Air-conditioning, system requirements - Heat recovery systems (VDI Ventilation Code of Practice) |
| VDI 3802 Blatt 1:2014-09 | Air conditioning systems for factories |
| VDI 6022 Blatt 3:2011-07 | Ventilation and indoor-air quality - Assessment of indoor-air quality |
| VDI 3803 Blatt 2:2017-09 (Draft) | Ventilation and air conditioning - Structural and technical principles - Decentralized ventilation units (VDI ventilation code of practice) |
| I.S. EN 15377-3:2007 | HEATING SYSTEMS IN BUILDINGS - DESIGN OF EMBEDDED WATER BASED SURFACE HEATING AND COOLING SYSTEMS - PART 3: OPTIMIZING FOR USE OF RENEWABLE ENERGY SOURCES |
| BS EN 15643-4:2012 | Sustainability of construction works. Assessment of buildings Framework for the assessment of economic performance |
| 09/30192729 DC : DRAFT FEB 2009 | BS EN 15643-2 - SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 2: FRAMEWORK FOR THE ASSESSMENT OF ENVIRONMENTAL PERFORMANCE |
| I.S. EN ISO 13790:2008 | ENERGY PERFORMANCE OF BUILDINGS - CALCULATION OF ENERGY USE FOR SPACE HEATING AND COOLING |
| 09/30204398 DC : 0 | BS EN 15978 - SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF ENVIRONMENTAL PERFORMANCE OF BUILDINGS - CALCULATION METHOD |
| 08/30173524 DC : DRAFT FEB 2008 | BS EN 15759 - CONSERVATION OF CULTURAL PROPERTY - SPECIFICATION AND CONTROL OF INDOOR ENVIRONMENT - HEATING OF CHURCHES |
| 15/30303577 DC : 0 | BS EN ISO 52016-1 - ENERGY PERFORMANCE OF BUILDINGS - CALCULATION OF THE ENERGY NEEDS FOR HEATING AND COOLING, INTERNAL TEMPERATURES AND HEATING AND COOLING LOAD IN A BUILDING OR BUILDING ZONE - PART 1: CALCULATION PROCEDURES |
| UNI CEI EN 16247-2 : 2014 | ENERGY AUDITS - PART 2: BUILDINGS |
| DIN EN 16247-2:2014-08 | ENERGY AUDITS - PART 2: BUILDINGS |
| 07/30167162 DC : 0 | BS EN 15726 - VENTILATION FOR BUILDINGS - AIR DIFFUSION - MEASUREMENTS IN THE OCCUPIED ZONE OF AIRCONDITIONED/ VENTILATED ROOMS TO EVALUATE THERMAL AND ACOUSTIC CONDITIONS |
| UNE-EN 16247-2:2014 | Energy audits - Part 2: Buildings |
| 10/30235574 DC : 0 | BS EN 12599 - VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
| 11/30247574 DC : 0 | BS EN 16309 - SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - METHODS |
| BS EN 15978:2011 | Sustainability of construction works. Assessment of environmental performance of buildings. Calculation method |
| 09/30192733 DC : DRAFT FEB 2009 | BS EN 15643-1 - SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 1: GENERAL FRAMEWORK |
| UNI EN 15726 : 2011 | VENTILATION FOR BUILDINGS - AIR DIFFUSION - MEASUREMENTS IN THE OCCUPIED ZONE OF AIR-CONDITIONED/VENTILATED ROOMS TO EVALUATE THERMAL AND ACOUSTIC CONDITIONS |
| CEN/TR 15615:2008 | Explanation of the general relationship between various European standards and the Energy Performance of Buildings Directive (EPBD) - Umbrella Document |
| BS EN 16309 : 2014 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY |
| I.S. EN ISO 11855-4:2015 | BUILDING ENVIRONMENT DESIGN - DESIGN, DIMENSIONING, INSTALLATION AND CONTROL OF EMBEDDED RADIANT HEATING AND COOLING SYSTEMS - PART 4: DIMENSIONING AND CALCULATION OF THE DYNAMIC HEATING AND COOLING CAPACITY OF THERMO ACTIVE BUILDING SYSTEMS (TABS) (ISO 11855-4:2012) |
| UNI EN 15643-3 : 2012 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 3: FRAMEWORK FOR THE ASSESSMENT OF SOCIAL PERFORMANCE |
| EN 15759-2:2018 | Conservation of cultural heritage - Indoor climate - Part 2: Ventilation management for the protection of cultural heritage buildings and collections |
| 10/30228171 DC : DRAFT MAY 2010 | BS EN 15759-1 - CONSERVATION OF CULTURAL PROPERTY - INDOOR CLIMATE - PART 1: HEATING PLACES OF WORSHIP |
| ISO 28802:2012 | Ergonomics of the physical environment — Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people |
| EN 15242:2007 | Ventilation for buildings - Calculation methods for the determination of air flow rates in buildings including infiltration |
| UNI EN 12599 : 2012 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
| UNI EN 15759-1 : 2012 | CONSERVATION OF CULTURAL PROPERTY - INDOOR CLIMATE - PART 1: GUIDELINES FOR HEATING CHURCHES, CHAPELS AND OTHER PLACES OF WORSHIP |
| UNI EN 13779 : 2008 | VENTILATION FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS |
| UNI EN ISO 13790 : 2008 | ENERGY PERFORMANCE OF BUILDINGS - CALCULATION OF ENERGY USE FOR SPACE HEATING AND COOLING |
| BS EN 15643-2:2011 | Sustainability of construction works. Assessment of buildings Framework for the assessment of environmental performance |
| DIN EN ISO 28803:2012-06 | Ergonomics of the physical environment - Application of international standards to people with special requirements (ISO 28803:2012) |
| 09/30191965 DC : 0 | BS ISO 28802 - ERGONOMICS OF THE PHYSICAL ENVIRONMENT - ASSESSMENT BY MEANS OF AN ENVIRONMENTAL SURVEY INVOLVING PHYSICAL MEASUREMENT OF THE ENVIRONMENT AND SUBJECTIVE RESPONSES OF PEOPLE |
| DIN EN 15726:2011-12 | Ventilation for buildings - Air diffusion - Measurements in the occupied zone of air-conditioned/ventilated rooms to evaluate thermal and acoustic conditions; German version EN 15726:2011 |
| BS EN 15726:2011 | Ventilation for buildings. Air diffusion. Measurements in the occupied zone of air-conditioned/ventilated rooms to evaluate thermal and acoustic conditions |
| DIN EN 16309:2014-12 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY |
| DIN EN 16627:2015-09 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF ECONOMIC PERFORMANCE OF BUILDINGS - CALCULATION METHODS |
| DIN EN 16883 E : 2017 | CONSERVATION OF CULTURAL HERITAGE - GUIDELINES FOR IMPROVING THE ENERGY PERFORMANCE OF HISTORIC BUILDINGS |
| UNI EN 15242 : 2008 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR THE DETERMINATION OF AIR FLOW RATES IN BUILDINGS INCLUDING INFILTRATION |
| DIN EN 15242:2007-09 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR THE DETERMINATION OF AIR FLOW RATES IN BUILDINGS INCLUDING INFILTRATION |
| I.S. EN 16883:2017 | CONSERVATION OF CULTURAL HERITAGE - GUIDELINES FOR IMPROVING THE ENERGY PERFORMANCE OF HISTORIC BUILDINGS |
| UNE-EN ISO 13790:2011 | Energy performance of buildings - Calculation of energy use for space heating and cooling (ISO 13790:2008) |
| DIN EN 16247-2:2014-08 | Energy audits - Part 2: Buildings |
| 10/30229726 DC : DRAFT JUNE 2010 | BS EN 15978 - SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF ENVIRONMENTAL PERFORMANCE OF BUILDINGS - CALCULATION METHOD |
| DIN EN 16627 E : 2015 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF ECONOMIC PERFORMANCE OF BUILDINGS - CALCULATION METHODS |
| BS EN ISO 28802:2012 | Ergonomics of the physical environment. Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people |
| DIN EN 15643-2:2011-05 | Sustainability of construction works - Assessment of buildings - Part 2: Framework for the assessment of environmental performance |
| EN ISO 11855-4:2015 | BUILDING ENVIRONMENT DESIGN - DESIGN, DIMENSIONING, INSTALLATION AND CONTROL OF EMBEDDED RADIANT HEATING AND COOLING SYSTEMS - PART 4: DIMENSIONING AND CALCULATION OF THE DYNAMIC HEATING AND COOLING CAPACITY OF THERMO ACTIVE BUILDING SYSTEMS (TABS) (ISO 11855-4:2012) |
| UNE-EN 15978:2012 | Sustainability of construction works - Assessment of environmental performance of buildings - Calculation method |
| UNE-EN 15759-1:2012 | Conservation of cultural property - Indoor climate - Part 1: Guidelines for heating churches, chapels and other places of worship |
| DIN EN 12599:2013-01 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
| ISO 28803:2012 | Ergonomics of the physical environment — Application of International Standards to people with special requirements |
| UNE EN 16309 : 0 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY |
| ISO 13790:2008 | Energy performance of buildings Calculation of energy use for space heating and cooling |
| BS EN 13779:2007 | Ventilation for non-residential buildings. Performance requirements for ventilation and room-conditioning systems |
| EN 15759-1:2011 | Conservation of cultural property - Indoor climate - Part 1: Guidelines for heating churches, chapels and other places of worship |
| EN 15726:2011 | Ventilation for buildings - Air diffusion - Measurements in the occupied zone of air-conditioned/ventilated rooms to evaluate thermal and acoustic conditions |
| EN 15243:2007 | Ventilation for buildings - Calculation of room temperatures and of load and energy for buildings with room conditioning systems |
| EN ISO 28802:2012 | Ergonomics of the physical environment - Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people (ISO 28802:2012) |
| EN 13779:2007 | Ventilation for non-residential buildings - Performance requirements for ventilation and room-conditioning systems |
| EN ISO 28803:2012 | Ergonomics of the physical environment - Application of international standards to people with special requirements (ISO 28803:2012) |
| EN 16309:2014+A1:2014 | Sustainability of construction works - Assessment of social performance of buildings - Calculation methodology |
| EN 15978:2011 | Sustainability of construction works - Assessment of environmental performance of buildings - Calculation method |
| EN 16883:2017 | Conservation of cultural heritage - Guidelines for improving the energy performance of historic buildings |
| EN 15377-3:2007 | Heating systems in buildings - Design of embedded water based surface heating and cooling systems - Part 3: Optimizing for use of renewable energy sources |
| EN 16627:2015 | Sustainability of construction works - Assessment of economic performance of buildings - Calculation methods |
| EN ISO 13790:2008 | Energy performance of buildings - Calculation of energy use for space heating and cooling (ISO 13790:2008) |
| EN 16247-2:2014 | Energy audits - Part 2: Buildings |
| I.S. EN 15643-4:2012 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 4: FRAMEWORK FOR THE ASSESSMENT OF ECONOMIC PERFORMANCE |
| 16/30332593 DC : 0 | BS EN 15759-2 - CONSERVATION OF CULTURAL HERITAGE - INDOOR CLIMATE - PART 2: VENTILATION TO PROTECT HERITAGE BUILDINGS AND COLLECTIONS |
| PD CEN/TR 15615:2008 | Explanation of the general relationship between various CEN standards and the Energy Performance of Buildings Directive (EPBD). Umbrella document |
| 11/30244192 DC : 0 | BS EN 16282-1 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 1: GENERAL REQUIREMENTS INCLUDING CALCULATION METHOD |
| DIN EN 15242 E : 2007 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR THE DETERMINATION OF AIR FLOW RATES IN BUILDINGS INCLUDING INFILTRATION |
| I.S. EN 15643-3:2012 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 3: FRAMEWORK FOR THE ASSESSMENT OF SOCIAL PERFORMANCE |
| 16/30333945 DC : 0 | BS EN 15643-5 - SUSTAINABILITY OF CONSTRUCTION WORKS - SUSTAINABILITY ASSESSMENT OF BUILDINGS AND CIVIL ENGINEERING WORKS - PART 5: FRAMEWORK FOR THE ASSESSMENT OF SUSTAINABILITY PERFORMANCE OF CIVIL ENGINEERING WORKS |
| CEI UNI EN 16247-2 : 2015 | ENERGY AUDITS - PART 2: BUILDINGS |
| I.S. EN 15643-1:2010 | SUSTAINABILITY OF CONSTRUCTION WORKS - SUSTAINABILITY ASSESSMENT OF BUILDINGS - PART 1: GENERAL FRAMEWORK |
| UNI EN 15643-1 : 2010 | SUSTAINABILITY OF CONSTRUCTION WORKS - SUSTAINABILITY ASSESSMENT OF BUILDINGS - PART 1: GENERAL FRAMEWORK |
| I.S. EN 15242:2007 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR THE DETERMINATION OF AIR FLOW RATES IN BUILDINGS INCLUDING INFILTRATION |
| PREN 15643-5 : DRAFT 2016 | SUSTAINABILITY OF CONSTRUCTION WORKS - SUSTAINABILITY ASSESSMENT OF BUILDINGS AND CIVIL ENGINEERING WORKS - PART 5: FRAMEWORK FOR THE ASSESSMENT OF SUSTAINABILITY PERFORMANCE OF CIVIL ENGINEERING WORKS |
| I.S. EN 15643-2:2011 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 2: FRAMEWORK FOR THE ASSESSMENT OF ENVIRONMENTAL PERFORMANCE |
| UNI EN ISO 28803 : 2012 | ERGONOMICS OF THE PHYSICAL ENVIRONMENT - APPLICATION OF INTERNATIONAL STANDARDS TO PEOPLE WITH SPECIAL REQUIREMENTS |
| DIN EN 15759-1:2012-02 | Conservation of cultural property - Indoor climate - Part 1: Guidelines for heating churches, chapels and other places of worship |
| ISO 11855-4:2012 | Building environment design Design, dimensioning, installation and control of embedded radiant heating and cooling systems Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) |
| BS EN ISO 13790:2008 | Energy performance of buildings. Calculation of energy use for space heating and cooling |
| BS EN 15377-3:2007 | Heating systems in buildings. Design of embedded water based surface heating and cooling systems Optimizing for use of renewable energy sources |
| BS EN 15759-1:2011 | Conservation of cultural property. Indoor climate Guidelines for heating churches, chapels and other places of worship |
| DIN EN 13779:2007-09 | VENTILATION FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS |
| DIN EN 15377-3:2007-12 | HEATING SYSTEMS IN BUILDINGS - DESIGN OF EMBEDDED WATER BASED SURFACE HEATING AND COOLING SYSTEMS - PART 3: OPTIMIZING FOR USE OF RENEWABLE ENERGY SOURCES |
| EN 15193:2007/AC:2010 | ENERGY PERFORMANCE OF BUILDINGS - ENERGY REQUIREMENTS FOR LIGHTING |
| EN ISO 13792:2012 | Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - Simplified methods (ISO 13792:2012) |
| EN 12464-1:2011 | Light and lighting - Lighting of work places - Part 1: Indoor work places |
| EN ISO 15927-4:2005 | Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 4: Hourly data for assessing the annual energy use for heating and cooling (ISO 15927-4:2005) |
| ISO 13792:2012 | Thermal performance of buildings Calculation of internal temperatures of a room in summer without mechanical cooling Simplified methods |
| EN 15240:2007 | Ventilation for buildings - Energy performance of buildings - Guidelines for inspection of air-conditioning systems |
| EN 15241:2007/AC:2011 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR ENERGY LOSSES DUE TO VENTILATION AND INFILTRATION IN BUILDINGS |
| ISO 15927-4:2005 | Hygrothermal performance of buildings — Calculation and presentation of climatic data — Part 4: Hourly data for assessing the annual energy use for heating and cooling |
| EN 12792:2003 | Ventilation for buildings - Symbols, terminology and graphical symbols |
| ISO 15927-5:2004 | Hygrothermal performance of buildings Calculation and presentation of climatic data Part 5: Data for design heat load for space heating |
| EN 12599:2012 | Ventilation for buildings - Test procedures and measurement methods to hand over air conditioning and ventilation systems |
| ISO 7726:1998 | Ergonomics of the thermal environment Instruments for measuring physical quantities |
| EN ISO 13790:2008 | Energy performance of buildings - Calculation of energy use for space heating and cooling (ISO 13790:2008) |
| EN ISO 13731:2001 | Ergonomics of the thermal environment - Vocabulary and symbols (ISO 13731:2001) |
| EN ISO 7726:2001 | Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998) |
| EN ISO 15927-5:2004/A1:2011 | Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 5: Data for design heat load for space heating - Amendment 1 (ISO 15927-5:2004/Amd 1:2011) |
| EN ISO 8996:2004 | Ergonomics of the thermal environment - Determination of metabolic rate (ISO 8996:2004) |
| DIN 5032 : LATEST | |
| CR 1752:1998 | Ventilation for buildings - Design criteria for the indoor environment |
| EN ISO 7730:2005 | Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO 7730:2005) |
| EN ISO 13791:2012 | Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - General criteria and validation procedures (ISO 13791:2012) |
| EN 12193:2007 | Light and lighting - Sports lighting |
| ISO 8996:2004 | Ergonomics of the thermal environment Determination of metabolic rate |
| ISO/TS 14415:2005 | Ergonomics of the thermal environment Application of International Standards to people with special requirements |
| EN 13032-1:2004+A1:2012 | Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 1: Measurement and file format |
| ISO 7730:2005 | Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria |
| CEN/TR 14788:2006 | Ventilation for buildings - Design and dimensioning of residential ventilation systems |
| ISO 13791:2012 | Thermal performance of buildings Calculation of internal temperatures of a room in summer without mechanical cooling General criteria and validation procedures |
| EN 15239:2007 | Ventilation for buildings - Energy performance of buildings - Guidelines for inspection of ventilation systems |
| EN ISO 9920:2009 | Ergonomics of the thermal environment - Estimation of thermal insulation and water vapour resistance of a clothing ensemble (ISO 9920:2007, Corrected version 2008-11-01) |
| EN 13779:2007 | Ventilation for non-residential buildings - Performance requirements for ventilation and room-conditioning systems |
| ISO 13790:2008 | Energy performance of buildings Calculation of energy use for space heating and cooling |
| EN 15242:2007 | Ventilation for buildings - Calculation methods for the determination of air flow rates in buildings including infiltration |
| ISO 9920:2007 | Ergonomics of the thermal environment Estimation of thermal insulation and water vapour resistance of a clothing ensemble |
| ISO 13731:2001 | Ergonomics of the thermal environment Vocabulary and symbols |
| EN 12831 : 2003 | HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD |
| EN 13032-3:2007 | Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 3: Presentation of data for emergency lighting of work places |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.