EN 16523-1:2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
10-14-2019
02-18-2015
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Test principle
5 Collecting media
6 Apparatus
7 Test specimens
8 Procedure
9 Test report
Annex A (informative) - Types of permeation behaviour
Annex B (informative) - Physical assessment of the samples
Annex C (informative) - Examples of appropriate techniques
for the detection of chemicals
Annex D (informative) - Examples of appropriate techniques
to assess flow and stirring for permeation with liquid
collecting medium
Annex E (informative) - Example of permeation cell
Annex F (informative) - Results of the interlaboratory trials
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of
EU Directive 89/686/EEC on PPE
Bibliography
This European Standard specifies a test method for the determination of the resistance of protective clothing, gloves and footwear materials to permeation by potential hazardous liquid chemicals under the condition of continuous contact.This test method is applicable to the assessment of protection against liquid chemicals that can be collected only by liquid or gaseous collecting media.This test method is not adapted for the assessment of chemical mixtures, except for aqueous solutions.This standard shall be used with the specifications given in the products standards (for examples EN 374 1 for gloves) where the following information shall be defined:-any pre-conditioning;-precise sampling (place, size, number);-associated levels of performance.
| Committee |
CEN/TC 162
|
| DevelopmentNote |
Supersedes EN 374-3. (03/2015) Supersedes UNE EN 374-3. (11/2015)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DS EN 16523-1 : 2015 | Identical |
| DIN EN 16523-1 E : 2015 | Identical |
| I.S. EN 16523-1:2015 | Identical |
| BS EN 16523-1 : 2015 | Identical |
| UNI EN 16523-1:2019 | Identical |
| DIN EN 16523-1:2015-04 | Identical |
| PN EN 16523-1 : 2015 | Identical |
| SN EN 16523-1 : 2015 | Identical |
| NEN EN 16523-1 : 2015 | Identical |
| UNI EN 16523-1 : 2015 | Identical |
| NS EN 16523-1 : 2015 | Identical |
| DIN EN 16523-1:2018-12 | Identical |
| ONORM EN 16523-1 : 2015 | Identical |
| NBN EN 16523-1 : 2015 | Identical |
| NF EN 16523-1 : 2015 | Identical |
| ÖNORM EN 16523-1: 2019 01 01 | Identical |
| UNE-EN 16523-1:2015 | Identical |
| UNE-EN 16523-1:2015+A1:2018 | Identical |
| BS EN ISO 374-1 : 2016 | PROTECTIVE GLOVES AGAINST DANGEROUS CHEMICALS AND MICRO-ORGANISMS - PART 1: TERMINOLOGY AND PERFORMANCE REQUIREMENTS FOR CHEMICAL RISKS (ISO 374-1:2016) |
| I.S. EN 16523-2:2015 | DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 2: PERMEATION BY GASEOUS CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT |
| EN 14225-2:2017 | Diving suits - Part 2: Dry suits - Requirements and test methods |
| CEN/TR 16953:2017 | Medical gloves for single use - Guidance for selection |
| BS EN 14225-2:2017 | Diving suits Dry suits. Requirements and test methods |
| 17/30359554 DC : 0 | BS EN 13832-2 - FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 2: REQUIREMENTS FOR LIMITED CONTACT WITH CHEMICALS |
| I.S. EN ISO 374-1:2016 | PROTECTIVE GLOVES AGAINST DANGEROUS CHEMICALS AND MICROORGANISMS - PART 1: TERMINOLOGY AND PERFORMANCE REQUIREMENTS FOR CHEMICAL RISKS |
| 16/30311281 DC : 0 | BS EN ISO 19918 - PROTECTIVE CLOTHING - PROTECTION AGAINST CHEMICALS - MEASUREMENT OF CUMULATIVE PERMEATION OF CHEMICALS WITH LOW VAPOUR PRESSURE THROUGH MATERIALS |
| 15/30302558 DC : 0 | BS EN ISO 374-1 - PROTECTIVE GLOVES AGAINST DANGEROUS CHEMICALS AND MICRO-ORGANISMS - PART 1: TERMINOLOGY AND PERFORMANCE REQUIREMENTS FOR CHEMICAL RISKS |
| DIN EN 16523-2 E : 2015 | DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 2: PERMEATION BY GASEOUS CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT |
| PD CEN/TR 16953:2017 | Medical gloves for single use. Guidance for selection |
| EN 16523-2:2015 | Determination of material resistance to permeation by chemicals - Part 2: Permeation by gaseous chemical under conditions of continuous contact |
| CEN/TR 15419:2017 | Protective clothing - Guidelines for selection, use, care and maintenance of chemical protective clothing |
| VDI 2083 Blatt 9.2:2017-01 | Cleanroom technology - Consumables in the cleanroom |
| PREN 13832-2 : DRAFT 2017 | FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 2: REQUIREMENTS FOR LIMITED CONTACT WITH CHEMICALS |
| PREN 13832-1 : DRAFT 2017 | FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS |
| BS EN 16523-2:2015 | Determination of material resistance to permeation by chemicals Permeation by gaseous chemical under conditions of continuous contact |
| ISO 374-1:2016 | Protective gloves against dangerous chemicals and micro-organisms Part 1: Terminology and performance requirements for chemical risks |
| S.R. CEN/TR 16953:2017 | MEDICAL GLOVES FOR SINGLE USE - GUIDANCE FOR SELECTION |
| PREN 13832-3 : DRAFT 2017 | FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 3: REQUIREMENTS FOR PROLONGED CONTACT WITH CHEMICALS |
| DIN EN ISO 374-1 E : 2017 | PROTECTIVE GLOVES AGAINST DANGEROUS CHEMICALS AND MICRO-ORGANISMS - PART 1: TERMINOLOGY AND PERFORMANCE REQUIREMENTS FOR CHEMICAL RISKS (ISO 374-1:2016) |
| PD CEN/TR 15419:2017 | Protective clothing. Guidelines for selection, use, care and maintenance of chemical protective clothing |
| EN ISO 374-1:2016 | Protective gloves against dangerous chemicals and micro-organisms - Part 1: Terminology and performance requirements for chemical risks (ISO 374-1:2016) |
| I.S. EN ISO 19918:2017 | PROTECTIVE CLOTHING - PROTECTION AGAINST CHEMICALS - MEASUREMENT OF CUMULATIVE PERMEATION OF CHEMICALS WITH LOW VAPOUR PRESSURE THROUGH MATERIALS (ISO 19918:2017) |
| DIN EN ISO 374-1:2015-05 (Draft) | PROTECTIVE GLOVES AGAINST DANGEROUS CHEMICALS AND MICRO-ORGANISMS - PART 1: TERMINOLOGY AND PERFORMANCE REQUIREMENTS FOR CHEMICAL RISKS (ISO 374-1:2016) |
| 17/30359551 DC : 0 | BS EN 13832-1 - FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS |
| I.S. EN 14225-2:2017 | DIVING SUITS - PART 2: DRY SUITS - REQUIREMENTS AND TEST METHODS |
| S.R. CEN/TR 15419:2017 | PROTECTIVE CLOTHING - GUIDELINES FOR SELECTION, USE, CARE AND MAINTENANCE OF CHEMICAL PROTECTIVE CLOTHING |
| BS EN ISO 19918:2017 | Protective clothing. Protection against chemicals. Measurement of cumulative permeation of chemicals with low vapour pressure through materials (ISO 19918:2017) |
| ISO 19918:2017 | Protective clothing — Protection against chemicals — Measurement of cumulative permeation of chemicals with low vapour pressure through materials |
| EN ISO 19918:2017 | Protective clothing - Protection against chemicals - Measurement of cumulative permeation of chemicals with low vapour pressure through materials (ISO 19918:2017) |
| DIN EN 16523-2:2015-04 | DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 2: PERMEATION BY GASEOUS CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| EN 374-1:2003 | Protective gloves against chemicals and micro-organisms - Part 1: Terminology and performance requirements |
| ISO 6530:2005 | Protective clothing — Protection against liquid chemicals — Test method for resistance of materials to penetration by liquids |
| EN ISO 6529:2001 | Protective clothing - Protection against chemicals - Determination of resistance of protective clothing materials to permeation by liquids and gases (ISO 6529:2001) |
| EN 13832-1:2006 | Footwear protecting against chemicals - Part 1: Terminology and test methods |
| ISO 23529:2016 | Rubber General procedures for preparing and conditioning test pieces for physical test methods |
| ISO/IEC Guide 98-4:2012 | Uncertainty of measurement Part 4: Role of measurement uncertainty in conformity assessment |
| EN 13832-3:2006 | Footwear protecting against chemicals - Part 3: Requirements for footwear highly resistant to chemicals under laboratory conditions |
| EN 374-3:2003/AC:2006 | PROTECTIVE GLOVES AGAINST CHEMICALS AND MICRO-ORGANISMS - PART 3: DETERMINATION OF RESISTANCE TO PERMEATION BY CHEMICALS |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
| EN ISO 3696:1995 | Water for analytical laboratory use - Specification and test methods (ISO 3696:1987) |
| EN ISO 868:2003 | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
| EN 374-4:2013 | Protective gloves against chemicals and micro-organisms - Part 4: Determination of resistance to degradation by chemicals |
| ISO 6529:2013 | Protective clothing Protection against chemicals Determination of resistance of protective clothing materials to permeation by liquids and gases |
| ISO 13994:2005 | Clothing for protection against liquid chemicals — Determination of the resistance of protective clothing materials to penetration by liquids under pressure |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
| ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.