EN 1670:2007/AC:2008
Current
Current
The latest, up-to-date edition.
BUILDING HARDWARE - CORROSION RESISTANCE - REQUIREMENTS AND TEST METHODS
Amendment of
Published date
03-26-2008
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Requirements
5.1 General
5.2 General test requirements
5.3 Functional acceptance condition
5.4 Appearance acceptance condition
5.4.1 General
5.4.2 Degree of rust
5.4.3 Degree of blistering
6 Test conditions
6.1 General conditions
6.2 Treatment following the corrosion test
7 Marking
Annex A (informative) - Examples of service conditions for
which the various grades of corrosion resistance
are appropriate
Bibliography
Describes the requirements for the corrosion resistance of building hardware for doors, windows, shutters and curtain walling.
| Committee |
CEN/TC 33
|
| DocumentType |
Test Method
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| UNE-EN 1670:2007 | Identical |
| DIN EN 1670:2007-06 | Identical |
| NBN EN 1670 : 2007 COR 2008 | Identical |
| SN EN 1670 : 2007 | Identical |
| NS EN 1670 : 2007 AC 2008 | Identical |
| I.S. EN 1670:2007 | Identical |
| NF EN 1670 : 2007 | Identical |
| PN EN 1670 : 2008 | Identical |
| NEN EN 1670 : 2007 C1 2008 | Identical |
| UNI EN 1670 : 2007 | Identical |
| BS EN 1670:2007 | Identical |
| I.S. EN 13126-16:2008 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 16: HARDWARE FOR LIFT&SLIDE WINDOWS AND DOORS |
| DIN EN 16864 E : 2017 | BUILDING HARDWARE - MECHATRONIC PADLOCKS - REQUIREMENTS AND TEST METHODS |
| EN 13126-2:2011 | Building hardware - Requirements and test methods for windows and doors height windows - Part 2: Window fastener handles |
| DIN EN 13126-14:2012-08 | Building hardware - Hardware for windows and balcony doors - Requirements and test methods - Part 14: Sash fasteners |
| I.S. EN 13126-7:2007 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOOR HEIGHT WINDOWS - PART 7: FINGER CATCHES |
| UNE-EN 13126-5:2012 | Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 5: Devices that restrict the opening of windows and door height windows |
| DD CEN/TS 13126-5:2004 | Building hardware, fittings for windows and door height windows. Requirements and test methods Devices that restrict the opening of windows |
| DIN EN 16580 E : 2015 | WINDOWS AND DOORS - WETNESS AND SPLASH WATER PROOF DOOR LEAVES - TEST AND CLASSIFICATION |
| 95/108834 DC : DRAFT NOV 1995 | PREN 12209-2 - BUILDING HARDWARE - LOCKS AND LATCHES - PART 2: STRIKING PLATES FOR MECHANICALLY OPERATED LOCKS AND LATCHES - REQUIREMENTS AND TEST METHODS |
| 11/30246626 DC : 0 | BS EN 13126-9 - BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 9: HARDWARE FOR HORIZONTAL AND VERTICAL PIVOT WINDOWS |
| 06/30156314 DC : 0 | BS EN 13120 - INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| BS EN 14846:2008 | Building hardware. Locks and latches. Electromechanically operated locks and striking plates. Requirements and test methods |
| BS EN 15684:2012 | Building hardware. Mechatronic cylinders. Requirements and test methods |
| PREN 13126-15 : DRAFT 2017 | QUINCAILLERIE POUR LE BATIMENT - FERRURES DE DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 15: ROLLERS FOR HORIZONTAL SLIDING AND HARDWARE FOR SLIDING FOLDING WINDOWS |
| DIN EN 13126-10:2009-02 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 10: ARM-BALANCING SYSTEMS |
| I.S. TS 13126-5:2004 | BUILDING HARDWARE, FITTINGS FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 5: DEVICES THAT RESTRICT THE OPENING OF WINDOWS |
| BS EN 16580:2015 | Windows and doors. Wetness and splash water proof door leaves. Test and classification |
| 12/30263172 DC : 0 | BS EN 1935 - BUILDING HARDWARE - SINGLE-AXIS HINGES - REQUIREMENTS AND TEST METHODS |
| DD CEN/TS 13126-8:2004 | Building hardware, fittings for windows and door height windows. Requirements and test methods Tilt & turn, Tilt-First and Turn-Only hardware |
| PREN 13126-8 : DRAFT 2016 | BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 8: REQUIREMENTS AND TEST METHODS FOR TILT & TURN, TILT-FIRST AND TURN-ONLY HARDWARE |
| UNE-EN 13126-8:2018 | Building hardware - Hardware for windows and door height windows - Part 8: Requirements and test methods for Tilt and Turn, Tilt-First and Turn-Only hardware |
| 11/30192936 DC : 0 | BS EN 13724 - POSTAL SERVICES - APERTURES OF PRIVATE LETTER BOXES AND LETTER PLATES - REQUIREMENTS AND TEST METHODS |
| 07/30166139 DC : 0 | BS EN 15684 - BUILDING HARDWARE - MECHATRONIC CYLINDERS - REQUIREMENTS AND TEST METHODS |
| 17/30335089 DC : 0 | BS EN 13126-6 - BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 6: VARIABLE GEOMETRY STAY HINGES (WITH OR WITHOUT A FRICTION STAY) |
| DD CEN/TS 13126-14:2004 | Building hardware, fittings for windows and door height windows. Requirements and test methods Sash fasteners |
| I.S. EN 13126-13:2012 | BUILDING HARDWARE - HARDWARE FOR WINDOWS AND BALCONY DOORS - REQUIREMENTS AND TEST METHODS - PART 13: SASH BALANCES |
| 09/30192323 DC : 0 | BS EN 13637 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| I.S. TS 13126-10:2004 | BUILDING HARDWARE, FITTINGS FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 10: ARM BALANCING SYSTEMS |
| PREN 13126-6 : DRAFT 2017 | BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 6: VARIABLE GEOMETRY STAY HINGES (WITH OR WITHOUT A FRICTION STAY) |
| I.S. TS 13126-14:2004 | BUILDING HARDWARE, FITTINGS FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 14: SASH FASTENERS |
| BS EN 16864:2017 | Building hardware. Mechatronic padlocks. Requirements and test methods |
| 07/30170532 DC : DRAFT NOV 2007 | BS EN 1906 - BUILDING HARDWARE - LEVER HANDLES AND KNOB FURNITURE - REQUIREMENTS AND TEST METHODS |
| UNE-EN 16580:2016 | Windows and doors - Wetness and splash water proof door leaves - Test and classification |
| DIN EN 13126-6:2009-02 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 6: VARIABLE GEOMETRY STAY HINGES (WITH OR WITHOUT A FRICTION STAY) |
| I.S. EN 16864:2017 | BUILDING HARDWARE - MECHATRONIC PADLOCKS - REQUIREMENTS AND TEST METHODS |
| 18/30361306 DC : 0 | BS EN 13126-16 - BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 16: HARDWARE FOR LIFT AND SLIDE WINDOWS |
| UNI EN 16034 : 2014 | PEDESTRIAN DOORSETS, INDUSTRIAL, COMMERCIAL, GARAGE DOORS AND OPENABLE WINDOWS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - FIRE RESISTING AND/OR SMOKE CONTROL CHARACTERISTICS |
| ONORM EN 13126-6 : 2009 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 6: VARIABLE GEOMETRY STAY HINGES (WITH OR WITHOUT A FRICTION STAY) |
| BS EN 13126-17:2008 | Building hardware. Requirements and test methods for windows and doors height windows Hardware for Tilt&Slide windows and doors |
| UNE-EN 13126-2:2012 | Building hardware - Requirements and test methods for windows and doors height windows - Part 2: Window fastener handles |
| BS EN 13120 : 2009 | INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| DIN EN 13561:2015-08 | EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| DIN EN 1906:2012-12 | BUILDING HARDWARE - LEVER HANDLES AND KNOB FURNITURE - REQUIREMENTS AND TEST METHODS |
| DIN EN 13126-7:2007-12 | Building hardware - Requirements and test methods for windows and door height windows - Part 7: Finger catches |
| BS EN 179:2008 | Building hardware. Emergency exit devices operated by a lever handle or push pad, for use on escape routes. Requirements and test methods |
| BS EN 12209:2016 | Building hardware. Mechanically operated locks and locking plates. Requirements and test methods |
| BS EN 12051:2000 | Building hardware. Door and window bolts. Requirements and test methods |
| UNE-EN 15684:2015 | Building hardware - Mechatronic cylinders - Requirements and test methods |
| I.S. EN 13126-1:2011 | BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 1: REQUIREMENTS COMMON TO ALL TYPES OF HARDWARE |
| DIN EN 13126-16:2008-04 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 16: HARDWARE FOR LIFT&SLIDE WINDOWS AND DOORS |
| EN 13126-1:2011 | Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 1: Requirements common to all types of hardware |
| EN 13561:2015/AC:2016 | EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| CEN/TS 16819:2015 | Postal services - Parcel boxes for end use - Technical features |
| EN 13126-19:2011 | Building hardware - Requirements and test methods for windows and door height windows - Part 19: Sliding Closing Devices |
| CEN/TS 13126-8:2004 | Building hardware, fittings for windows and door height windows - Requirements and test procedures - Part 8: Tilt & turn, Tilt-First and Turn-Only hardware |
| DIN EN 14846:2008-11 | BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS |
| DIN EN 15496:2008-04 | Cycles - Requirements and test methods for cycle locks |
| EN 13126-13:2012 | Building hardware - Hardware for windows and balcony doors - Requirements and test methods - Part 13: Sash balances |
| EN 13126-11:2008 | Building hardware - Requirements and test methods for windows and doors height windows - Part 11: Top hung projecting reversible hardware |
| CEN/TS 13126-9:2004 | Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 9: Pivot hinges |
| CEN/TS 13126-5:2004 | Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 5: Devices that restrict the opening of windows |
| CEN/TS 13126-1:2004 | Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 1: Requirements common to all types of fittings |
| EN 13126-5:2011+A1:2014 | Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 5: Devices that restrict the opening of windows and door height windows |
| EN 13126-14 : 2012 | BUILDING HARDWARE - HARDWARE FOR WINDOWS AND BALCONY DOORS - REQUIREMENTS AND TEST METHODS - PART 14: SASH FASTENERS |
| CEN/TS 13126-7:2004 | Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 7: Finger catches |
| EN 13126-4:2008 | Building hardware - Requirements and test methods for windows and doors height windows - Part 4: Espagnolettes |
| CEN/TS 13126-12:2004 | Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 12: Side-hung projecting reversible hardware |
| CEN/TS 13126-17:2004 | Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 17: Fittings for tilt and slide systems |
| CEN/TS 13126-2:2004 | Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 2: Casement fastener handles |
| CEN/TS 13126-4:2004 | Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 4: Espagnolette bolts |
| EN 1303:2015 | Building hardware - Cylinders for locks - Requirements and test methods |
| EN 12051:1999 | Building hardware - Door and window bolts - Requirements and test methods |
| UNI EN 13126-1 : 2012 | BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 1: REQUIREMENTS COMMON TO ALL TYPES OF HARDWARE |
| CEN/TS 13126-14:2004 | Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 14: Sash fasteners |
| I.S. TS 13126-4:2004 | BUILDING HARDWARE, FITTINGS FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 4: ESPAGNOLETTE BOLTS |
| DIN EN 16034:2014-12 | PEDESTRIAN DOORSETS, INDUSTRIAL, COMMERCIAL, GARAGE DOORS AND OPENABLE WINDOWS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - FIRE RESISTANCE AND/OR SMOKE CONTROL CHARACTERISTICS |
| 11/30241848 DC : 0 | BS EN 13561 - EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| 10/30218923 DC : DRAFT JUNE 2010 | BS EN 13126-1 - BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 1: REQUIREMENTS COMMON TO ALL TYPES OF HARDWARE |
| 14/30302455 DC : 0 | BS EN 13659 - SHUTTERS AND EXTERNAL VENETIAN BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| I.S. EN 16580:2015 | WINDOWS AND DOORS - WETNESS AND SPLASH WATER PROOF DOOR LEAVES - TEST AND CLASSIFICATION |
| 15/30298550 DC : 0 | BS EN 16864 - BUILDING HARDWARE - MECHATRONIC PADLOCKS - REQUIREMENTS AND TEST METHODS |
| DIN EN 13126-13:2012-08 | Building hardware - Hardware for windows and balcony doors - Requirements and test methods - Part 13: Sash balances |
| 14/30302452 DC : 0 | BS EN 13561 - EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| UNI EN 14846 : 2008 | BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS |
| 01/103190 DC : DRAFT MAR 2001 | PREN 12209 - BUILDING HARDWARE - LOCKS AND LATCHES - MECHANICALLY OPERATED LOCKS, LATCHES AND LOCKING PLATES - REQUIREMENTS AND TEST METHODS |
| UNI EN 15644 : 2009 | TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS |
| BS EN 16034:2014 | Pedestrian doorsets, industrial, commercial, garage doors and openable windows. Product standard, performance characteristics. Fire resisting and/or smoke control characteristics |
| DD CEN/TS 13126-17:2004 | Building hardware, fittings for windows and door height windows. Requirements and test methods Fittings for tilt and slide systems |
| PREN 1935 : DRAFT 2012 | BUILDING HARDWARE - SINGLE-AXIS HINGES - REQUIREMENTS AND TEST METHODS |
| 03/102517 DC : 0 | BS EN 13633 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED PANIC EXIT SYSTEMS - REQUIREMENTS AND TEST METHODS |
| BS EN 13126-4:2008 | Building hardware. Requirements and test methods for windows and doors height windows Espagnolettes |
| 03/102595 DC : 0 | BS EN 14637 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED HOLD-OPEN SYSTEMS FOR FIRE/SMOKE DOOR ASSEMBLIES - REQUIREMENTS, TEST METHODS, APPLICATION AND MAINTENANCE |
| UNI EN 13126-5 : 2014 | A BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 5: DEVICES THAT RESTRICT THE OPENING OF WINDOWS AND DOOR HEIGHT WINDOWS |
| DD CEN/TS 13126-13:2004 | Building hardware, fittings for windows and door height windows. Requirements and test methods Sash balances |
| DD CEN/TS 13126-4:2004 | Building hardware, fittings for windows and door height windows. Requirements and test methods Espagnolette bolts |
| UNE-EN 13126-9:2015 | Building hardware - Requirements and test methods for windows and door height windows - Part 9: Hardware for horizontal and vertical pivot windows |
| DD CEN/TS 13126-11:2004 | Building hardware, fittings for windows and door height windows. Requirements and test methods Top hung projecting reversible hardware |
| PREN 1527 : DRAFT 2017 | BUILDING HARDWARE - HARDWARE FOR SLIDING DOORS AND FOLDING DOORS - REQUIREMENTS AND TEST METHODS |
| PREN 12209 : DRAFT 2011 | BUILDING HARDWARE - MECHANICALLY OPERATED LOCKS AND LOCKING PLATES - REQUIREMENTS AND TEST METHODS |
| DD CEN/TS 13126-10:2004 | Building hardware, fittings for windows and door height windows. Requirements and test methods Arm balancing systems |
| I.S. EN 16034:2014 | PEDESTRIAN DOORSETS, INDUSTRIAL, COMMERCIAL, GARAGE DOORS AND OPENABLE WINDOWS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - FIRE RESISTING AND/OR SMOKE CONTROL CHARACTERISTICS |
| NF EN 13126-2 : 2011 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 2: WINDOW FASTENER HANDLES |
| EN 1527:2013 | Building hardware - Hardware for sliding doors and folding doors - Requirements and test methods |
| I.S. TS 13126-15:2004 | BUILDING HARDWARE, FITTINGS FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 15: ROLLERS |
| UNI EN 15496 : 2008 | CYCLES - REQUIREMENTS AND TEST METHODS FOR CYCLE LOCKS |
| PREN 13659 : DRAFT 2014 | SHUTTERS AND EXTERNAL VENETIAN BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| I.S. TS 13126-3:2004 | BUILDING HARDWARE, FITTINGS FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 3: MANOEUVRING FITTINGS FOR ESPAGNOLETTE BOLTS/SLIDING BUTTON |
| PREN 16867 : DRAFT 2015 | BUILDING HARDWARE - MECHATRONIC DOOR FURNITURE - REQUIREMENTS AND TEST METHODS |
| PREN 1906 : DRAFT 2009 | BUILDING HARDWARE - LEVER HANDLES AND KNOB FURNITURE - REQUIREMENTS AND TEST METHODS |
| UNI EN 13126-15 : 2008 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 15: ROLLERS FOR HORIZONTAL SLIDING AND SLIDING FOLDING WINDOWS AND DOORS |
| UNI EN 13126-6 : 2009 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 6: VARIABLE GEOMETRY STAY HINGES (WITH OR WITHOUT A FRICTION STAY) |
| I.S. TS 13126-8:2004 | BUILDING HARDWARE, FITTINGS FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST PROCEDURES - PART 8: TILT & TURN, TILT-FIRST AND TURN-ONLY HARDWARE |
| BS EN 13126-15:2008 | Building hardware. Requirements and test methods for windows and doors height windows Rollers for horizontal sliding and sliding folding windows and doors |
| UNE-EN 14846:2010 | Building hardware - Locks and latches - Electromechanically operated locks and striking plates - Requirements and test methods |
| EN 13126-16:2008 | Building hardware - Requirements and test methods for windows and doors height windows - Part 16: Hardware for Lift&Slide windows and doors |
| EN 13724:2013/AC:2016 | POSTAL SERVICES - APERTURES OF PRIVATE LETTER BOXES AND LETTER PLATES - REQUIREMENTS AND TEST METHODS |
| DIN EN 1303:2015-08 | Building hardware - Cylinders for locks - Requirements and test methods |
| UNE-EN 13724:2013 | Postal services - Apertures of private letter boxes and letter plates - Requirements and test methods |
| BS EN 1158:1997 | Building hardware. Door coordinator devices. Requirements and test methods |
| I.S. EN 13659:2015 | SHUTTERS AND EXTERNAL VENETIAN BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| I.S. EN 13724:2013 | POSTAL SERVICES - APERTURES OF PRIVATE LETTER BOXES AND LETTER PLATES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 179:2008 | BUILDING HARDWARE - EMERGENCY EXIT DEVICES OPERATED BY A LEVER HANDLE OR PUSH PAD, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| DIN EN 1527:2013-03 | BUILDING HARDWARE - HARDWARE FOR SLIDING DOORS AND FOLDING DOORS - REQUIREMENTS AND TEST METHODS |
| EN 15684:2012 | Building hardware - Mechatronic cylinders - Requirements and test methods |
| I.S. EN 12320:2012 | BUILDING HARDWARE - PADLOCKS AND PADLOCK FITTINGS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 1155:1998 | BUILDING HARDWARE - ELECTRICALLY POWERED HOLD-OPEN DEVICES FOR SWING DOORS - REQUIREMENTS AND TEST METHODS |
| UNI EN 15684 : 2012 | BUILDING HARDWARE - MECHATRONIC CYLINDERS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 1303:2015 | BUILDING HARDWARE - CYLINDERS FOR LOCKS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 12209:2016 | BUILDING HARDWARE - MECHANICALLY OPERATED LOCKS AND LOCKING PLATES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 13120:2009 | INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| I.S. EN 1125:2008 | BUILDING HARDWARE - PANIC EXIT DEVICES OPERATED BY A HORIZONTAL BAR, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 14600:2005 | DOORSETS AND OPENABLE WINDOWS WITH FIRE RESISTING AND/OR SMOKE CONTROL CHARACTERISTICS - REQUIREMENTS AND CLASSIFICATION |
| I.S. EN 13561:2015 | EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| I.S. EN 1906:2012 | BUILDING HARDWARE - LEVER HANDLES AND KNOB FURNITURE - REQUIREMENTS AND TEST METHODS |
| 07/30160471 DC : 0 | BS EN 14648 - BUILDING HARDWARE - FITTINGS FOR SHUTTERS - REQUIREMENTS AND TEST METHODS |
| PREN 13126-17 : DRAFT 2018 | BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 17: HARDWARE FOR TILT AND SLIDE WINDOWS |
| UNI EN 13126-10 : 2009 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 10: ARM-BALANCING SYSTEMS |
| PD CEN/TS 16819:2015 | Postal services. Parcel boxes for end use. Technical features |
| 09/30192320 DC : DRAFT MAY 2009 | BS EN 13633 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED PANIC EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| PREN 1125 : DRAFT 2016 | BUILD HARDWARE - PANIC EXIT DEVICES OPERATED BY A HORIZONTAL BAR, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| DIN EN 13126-9:2013-04 | Building hardware - Requirements and test methods for windows and door height windows - Part 9: Hardware for horizontal and vertical pivot windows |
| BS EN 13126-19:2011 | Building hardware. Requirements and test methods for windows and door height windows Sliding closing devices |
| I.S. EN 1527:2013 | BUILDING HARDWARE - HARDWARE FOR SLIDING DOORS AND FOLDING DOORS - REQUIREMENTS AND TEST METHODS |
| BS EN 13126-9:2013 | Building hardware. Requirements and test methods for windows and door height windows Hardware for horizontal and vertical pivot windows |
| DIN EN 13126-4:2009-01 | Building hardware - Requirements and test methods for windows and doors height windows - Part 4: Espagnolettes |
| 13/30264195 DC : 0 | BS EN 1303 - BUILDING HARDWARE - CYLINDERS FOR LOCKS - REQUIREMENTS AND TEST METHODS |
| UNI EN 13126-19 : 2011 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOOR HEIGHT WINDOWS - PART 19: SLIDING CLOSING DEVICES |
| BS EN 13126-12:2008 | Building hardware. Requirements and test methods for windows and doors height windows Side hung projecting reversible hardware |
| DIN EN 15684:2013-01 | Building hardware - Mechatronic cylinders - Requirements and test methods |
| DIN EN 16580:2015-10 | Windows and doors - Wetness and splash water proof door leaves - Test and classification |
| 07/30161334 DC : 0 | BS EN 15644 - TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS |
| UNE-EN 13637:2016 | Building hardware - Electrically controlled exit systems for use on escape routes - Requirements and test methods |
| DIN EN 13126-3:2012-02 | Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 3: Handles, primarily for Tilt and Turn, Tilt-First and Turn-Only hardware |
| 11/30204176 DC : 0 | BS EN 12209 - BUILDING HARDWARE - MECHANICALLY OPERATED LOCKS AND LOCKING PLATES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 13637:2015 | BUILDING HARDWARE - ELECTRICALLY CONTROLLED EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| 03/102655 DC : 0 | EN 14648 - BUILDING HARDWARE - FITTINGS FOR SHUTTERS - REQUIREMENTS AND TEST METHODS |
| DD CEN/TS 13126-6:2004 | Building hardware, fittings for windows and door height windows. Requirements and test methods Variable geometry stay hinges (with or without a friction system) |
| UNE-EN 13126-11:2010 | Building hardware - Requirements and test methods for windows and doors height windows - Part 11: Top hung projecting reversible hardware |
| UNI EN 13126-7 : 2008 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOOR HEIGHT WINDOWS - PART 7: FINGER CATCHES |
| 11/30233173 DC : 0 | BS EN 1527 - BUILDING HARDWARE - HARDWARE FOR SLIDING DOORS AND FOLDING DOORS - REQUIREMENTS AND TEST METHODS |
| 10/30203650 DC : 0 | BS EN 15684 - BUILDING HARDWARE - MECHATRONIC CYLINDERS FOR LOCKS - REQUIREMENTS AND TEST METHODS |
| 03/102563 DC : 0 | EN 1125 - BUILDING HARDWARE - PANIC EXIT DEVICES OPERATED BY A HORIZONTAL BAR, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| UNE-EN 13126-13:2013 | Building hardware - Hardware for windows and balcony doors - Requirements and test methods - Part 13: Sash balances |
| I.S. EN 13126-10:2008 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 10: ARM-BALANCING SYSTEMS |
| I.S. TS 13126-12:2004 | BUILDING HARDWARE, FITTINGS FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 12: SIDE-HUNG PROJECTING REVERSIBLE HARDWARE |
| I.S. EN 13126-8:2017 | BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOOR HEIGHT WINDOWS - PART 8: REQUIREMENTS AND TEST METHODS FOR TILT AND TURN, TILT-FIRST AND TURN-ONLY HARDWARE |
| I.S. TS 13126-1:2004 | BUILDING HARDWARE, FITTINGS FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 1: REQUIREMENTS COMMON TO ALL TYPES OF FITTINGS |
| PREN 14846 : DRAFT 2015 | BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 13126-15:2008 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 15: ROLLERS FOR HORIZONTAL SLIDING AND SLIDING FOLDING WINDOWS AND DOORS |
| PREN 179 : DRAFT 2016 | BUILDING HARDWARE - EMERGENCY EXIT DEVICES OPERATED BY A LEVER HANDLE OR PUSH PAD, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| I.S. TS 13126-2:2004 | BUILDING HARDWARE, FITTINGS FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 2: CASEMENT FASTENER HANDLES |
| UNE-EN 13126-19:2011 | Building hardware - Requirements and test methods for windows and door height windows - Part 19: Sliding Closing Devices |
| UNE-EN 16034:2015 | Pedestrian doorsets, industrial, commercial, garage doors and openable windows - Product standard, performance characteristics - Fire resisting and/or smoke control characteristics |
| PREN 13126-16 : DRAFT 2018 | BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 16: HARDWARE FOR LIFT AND SLIDE WINDOWS |
| EN 13126-17:2008 | Building hardware - Requirements and test methods for windows and doors height windows - Part 17: Hardware for Tilt&Slide windows and doors |
| 18/30361302 DC : 0 | BS EN 13126-17 - BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 17: HARDWARE FOR TILT AND SLIDE WINDOWS |
| UNI EN 13126-17 : 2008 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 17: HARDWARE FOR TILT & SLIDE WINDOWS AND DOORS |
| DIN EN 13126-1:2012-02 | Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 1: Requirements common to all types of hardware |
| I.S. EN 14846:2008 | BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 13126-4:2008 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 4: ESPAGNOLETTES |
| I.S. EN 15644:2009 | TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS |
| DIN EN 13120:2014-09 | INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| DIN EN 15496 E : 2008 | CYCLES - REQUIREMENTS AND TEST METHODS FOR CYCLE LOCKS |
| DIN EN 12320:2012-12 | Building hardware - Padlocks and padlock fittings - Requirements and test methods |
| DIN EN 1125:2008-04 | BUILDING HARDWARE - PANIC EXIT DEVICES OPERATED BY A HORIZONTAL BAR, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| DIN EN 14648 E : 2007 | BUILDING HARDWARE - FITTINGS FOR SHUTTERS - REQUIREMENTS AND TEST METHODS |
| DIN EN 14637 E : 2008 | BUILDING HARDWARE - ELECTRICALLY CONTROLLED HOLD-OPEN SYSTEMS FOR FIRE/SMOKE DOOR ASSEMBLIES - REQUIREMENTS, TEST METHODS, APPLICATION AND MAINTENANCE |
| BS EN 1125:2008 | Building hardware. Panic exit devices operated by a horizontal bar, for use on escape routes. Requirements and test methods |
| BS EN 14600:2005 | Doorsets and openable windows with fire resisting and/ or smoke control characteristics. Requirements and classification |
| BS EN 1154:1997 | Building hardware. Controlled door closing devices. Requirements and test methods |
| UNE-EN 13126-1:2012 | Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 1: Requirements common to all types of hardware |
| BS EN 14637:2007 | Building hardware. Electrically controlled hold-open systems for fire/smoke door assemblies. Requirements, test methods, application and maintenance |
| UNI EN 1906 : 2012 | BUILDING HARDWARE - LEVER HANDLES AND KNOB FURNITURE - REQUIREMENTS AND TEST METHODS |
| UNI EN 1935 : 2004 | BUILDING HARDWARE - SINGLE-AXIS HINGES - REQUIREMENTS AND TEST METHODS |
| UNI EN 1158 : 2003 | BUILDING HARDWARE - DOOR COORDINATOR DEVICES - REQUIREMENTS AND TEST METHODS |
| UNI EN 13120 : 2014 | INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| UNI EN 14600 : 2006 | DOORSETS AND OPENABLE WINDOWS WITH FIRE RESISTING AND/OR SMOKE CONTROL CHARACTERISTICS - REQUIREMENTS AND CLASSIFICATION |
| EN 1125:2008 | Building hardware - Panic exit devices operated by a horizontal bar, for use on escape routes - Requirements and test methods |
| UNI EN 1154 : 2003 | BUILDING HARDWARE - CONTROLLED DOOR CLOSING DEVICES - REQUIREMENTS AND TEST METHODS |
| UNI EN 13724 : 2013 | POSTAL SERVICES - APERTURES OF PRIVATE LETTER BOXES AND LETTER PLATES - REQUIREMENTS AND TEST METHODS |
| UNI EN 1155 : 2003 | BUILDING HARDWARE - ELECTRICALLY POWERED HOLD-OPEN DEVICES FOR SWING DOORS - REQUIREMENTS AND TEST METHODS |
| UNI EN 179 : 2008 | BUILDING HARDWARE - EMERGENCY EXIT DEVICES OPERATED BY A LEVER HANDLE OR PUSH PAD, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| UNI EN 1125 : 2008 | BUILDING HARDWARE - PANIC EXIT DEVICES OPERATED BY A HORIZONTAL BAR, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| DIN EN 15644 E : 2009 | TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS |
| 07/30164493 DC : 0 | BS EN 14637 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED HOLD-OPEN SYSTEMS FOR FIRE/SMOKE DOOR ASSEMBLIES - REQUIREMENTS, TEST METHODS, APPLICATIONS AND MAINTENANCE |
| I.S. EN 13126-5:2011 | BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 5: DEVICES THAT RESTRICT THE OPENING OF WINDOWS AND DOOR HEIGHT WINDOWS |
| UNI EN 13126-12 : 2009 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 12: SIDE HUNG PROJECTING REVERSIBLE HARDWARE |
| 06/30135398 DC : 0 | EN 15496 - CYCLES - REQUIREMENTS AND TEST METHODS FOR CYCLE LOCKS |
| 16/30335086 DC : 0 | BS EN 13126-8 - BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 8: REQUIREMENTS AND TEST METHODS FOR TILT & TURN, TILT-FIRST AND TURN-ONLY HARDWARE |
| NF EN 13126-19 : 2011 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOOR HEIGHT WINDOWS - PART 19: SLIDING CLOSING DEVICES |
| BS EN 13126-14:2012 | Building hardware. Hardware for windows and balcony doors. Requirements and test methods Sash fasteners |
| UNE-CEN/TS 13126-13:2010 EX | Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 13: Sash balances |
| 11/30241851 DC : 0 | BS EN 13659 - SHUTTERS AND EXTERNAL VENETIAN BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| BS EN 13126-10:2008 | Building hardware. Requirements and test methods for windows and doors height windows Arm-balancing systems |
| DIN EN 15684 E : 2013 | BUILDING HARDWARE - MECHATRONIC CYLINDERS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 13126-12:2008 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 12: SIDE HUNG PROJECTING REVERSIBLE HARDWARE |
| DD CEN/TS 13126-12:2004 | Building hardware, fittings for windows and door height windows. Requirements and test methods Side-hung projecting reversible hardware |
| 10/30218926 DC : 0 | BS EN 13126-3 - BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOOR-HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 3: HANDLES, PRIMARILY FOR TILT AND TURN, TILT-FIRST AND TURN-ONLY HARDWARE |
| I.S. TS 13126-6:2004 | BUILDING HARDWARE, FITTINGS FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 6: VARIABLE GEOMETRY STAY HINGES (WITH OR WITHOUT A FRICTION SYSTEM) |
| I.S. EN 13126-3:2011 | BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOOR-HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 3: HANDLES, PRIMARILY FOR TILT&TURN, TILT-FIRST AND TURN-ONLY HARDWARE |
| BS EN 15644:2008 | Traditionally designed prefabricated stairs made of solid wood. Specifications and requirements |
| BS EN 13126-8:2017 | Building hardware. Hardware for windows and door height windows Requirements and test methods for Tilt and Turn, Tilt-First and Turn-Only hardware |
| I.S. EN 13126-6:2008 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 6: VARIABLE GEOMETRY STAY HINGES (WITH OR WITHOUT A FRICTION STAY) |
| I.S. EN 13126-14:2012 | BUILDING HARDWARE - HARDWARE FOR WINDOWS AND BALCONY DOORS - REQUIREMENTS AND TEST METHODS - PART 14: SASH FASTENERS |
| 98/100652 DC : DRAFT JAN 1998 | BS EN 13126-13 BUILDING HARDWARE - FITTINGS FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 13: SASH BALANCES |
| DD CEN/TS 13126-7:2004 | Building hardware, fittings for windows and door height windows. Requirements and test methods Finger catches |
| 09/30203647 DC : 0 | BS EN 1906 - BUILDING HARDWARE - LEVER HANDLES AND KNOB FURNITURE - REQUIREMENTS AND TEST METHODS |
| BS EN 13126-3:2011 | Building hardware. Hardware for windows and door-height windows. Requirements and test methods Handles, primarily for Tilt&Turn, Tilt-First and Turn-Only hardware |
| PREN 12320 : DRAFT 2010 | BUILDING HARDWARE - PADLOCKS AND PADLOCK FITTINGS - REQUIREMENTS AND TEST METHODS |
| 03/118296 DC : 0 | BS EN 14846 - BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS |
| 09/30185848 DC : 0 | BS EN 13126-19 - BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOOR HEIGHT WINDOWS - PART 19: SLIDING CLOSING DEVICES |
| 07/30152444 DC : 0 | BS EN 13126-7 - BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOOR HEIGHT WINDOWS - PART 7: FINGER CATCHES |
| BS EN 13126-6:2008 | Building hardware. Requirements and test methods for windows and doors height windows Variable geometry stay hinges (with or without a friction stay) |
| ONORM EN 13126-17 : 2008 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 17: HARDWARE FOR TILT&SLIDE WINDOWS AND DOORS |
| DD CEN/TS 13126-1:2004 | Building hardware, fittings for windows and door height windows. Requirements and test methods Requirements common to all types of fittings |
| DIN EN 13126-11:2009-02 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 11: TOP HUNG PROJECTING REVERSIBLE HARDWARE |
| UNE-CEN/TS 13126-14:2010 EX | Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 14: Sash fasteners |
| DIN EN 13126-2:2011-12 | Building hardware - Requirements and test methods for windows and door height windows - Part 2: Window fastener handles |
| UNE-CEN/TS 13126-9:2010 EX | Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 9: Pivot hinges |
| I.S. TS 13126-9:2004 | BUILDING HARDWARE, FITTINGS FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 9: PIVOT HINGES |
| I.S. EN 13126-11:2008 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 11: TOP HUNG PROJECTING REVERSIBLE HARDWARE |
| I.S. TS 13126-17:2004 | BUILDING HARDWARE, FITTINGS FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 17: FITTINGS FOR TILT AND SLIDE SYSTEMS |
| BS EN 1527:2013 | Building hardware. Hardware for sliding doors and folding doors. Requirements and test methods |
| I.S. TS 13126-11:2004 | BUILDING HARDWARE, FITTINGS FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 11: TOP HUNG PROJECTING REVERSIBLE HARDWARE |
| UNE-EN 13126-14:2013 | Building hardware - Hardware for windows and balcony doors - Requirements and test methods - Part 14: Sash fasteners |
| DIN EN 16864:2015-06 (Draft) | BUILDING HARDWARE - MECHATRONIC PADLOCKS - REQUIREMENTS AND TEST METHODS |
| PREN 13126-3 : DRAFT 2010 | BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOOR-HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 3: HANDLES, PRIMARILY FOR TILT AND TURN, TILT-FIRST AND TURN-ONLY HARDWARE |
| UNI EN 13126-16 : 2008 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 16: HARDWARE FOR LIFT & SLIDE WINDOWS AND DOORS |
| 16/30343246 DC : 0 | BS EN 1125 - BUILDING HARDWARE - PANIC EXIT DEVICES OPERATED BY A HORIZONTAL BAR, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 13126-9:2013 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOOR HEIGHT WINDOWS - PART 9: HARDWARE FOR HORIZONTAL AND VERTICAL PIVOT WINDOWS |
| 15/30298562 DC : 0 | BS EN 16867 - BUILDING HARDWARE - MECHATRONIC DOOR FURNITURE - REQUIREMENTS AND TEST METHODS |
| 17/30361315 DC : 0 | BS EN 1527 - BUILDING HARDWARE - HARDWARE FOR SLIDING DOORS AND FOLDING DOORS - REQUIREMENTS AND TEST METHODS |
| EN 13126-15:2008 | Building hardware - Requirements and test methods for windows and doors height windows - Part 15: Rollers for horizontal sliding and sliding folding windows and doors |
| PREN 13724 : DRAFT 2011 | POSTAL SERVICES - APERTURES OF PRIVATE LETTER BOXES AND LETTER PLATES - REQUIREMENTS AND TEST METHODS |
| UNE-EN 13126-12:2010 | Building hardware - Requirements and test methods for windows and doors height windows - Part 12: Side hung projecting reversible hardware |
| EN 13126-8:2017 | Building hardware - Hardware for windows and door height windows - Part 8: Requirements and test methods for Tilt and Turn, Tilt-First and Turn-Only hardware |
| UNI EN 1527 : 2013 | BUILDING HARDWARE - HARDWARE FOR SLIDING DOORS AND FOLDING DOORS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 13126-2:2011 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 2: WINDOW FASTENER HANDLES |
| I.S. EN 13126-19:2011 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOOR HEIGHT WINDOWS - PART 19: SLIDING CLOSING DEVICES |
| I.S. TS 13126-7:2004 | BUILDING HARDWARE, FITTINGS FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 7: FINGER CATCHES |
| DIN EN 13724:2013-07 | POSTAL SERVICES - APERTURES OF PRIVATE LETTER BOXES AND LETTER PLATES - REQUIREMENTS AND TEST METHODS |
| UNE-EN 13659:2016 | Shutters and external venetian blinds - Performance requirements including safety |
| BS EN 13126-1:2011 | Building hardware. Hardware for windows and door height windows. Requirements and test methods Requirements common to all types of hardware |
| BS EN 15496:2008 | Cycles. Requirements and test methods for cycle locks |
| BS EN 14648:2007 | Building hardware. Fittings for shutters. Requirements and test methods |
| BS EN 1935:2002 | Building hardware. Single-axis hinges. Requirements and test methods |
| BS EN 1303:2015 | Building hardware. Cylinders for locks. Requirements and test methods |
| UNE-EN 12209:2017 | Building hardware - Mechanically operated locks and locking plates - Requirements and test methods |
| BS EN 13561:2015 | External blinds and awnings. Performance requirements including safety |
| BS EN 13126-7:2007 | Building hardware. Requirements and test methods for windows and door height windows Finger catches |
| BS EN 12320:2012 | Building hardware. Padlocks and padlock fittings. Requirements and test methods |
| EN 13637:2015 | Building hardware - Electrically controlled exit systems for use on escape routes - Requirements and test methods |
| EN 16034:2014 | Pedestrian doorsets, industrial, commercial, garage doors and openable windows - Product standard, performance characteristics - Fire resisting and/or smoke control characteristics |
| EN 14648:2007 | Building hardware - Fittings for shutters - Requirements and test methods |
| EN 14846:2008 | Building hardware - Locks and latches - Electromechanically operated locks and striking plates - Requirements and test methods |
| EN 16864:2017 | Building hardware - Mechatronic padlocks - Requirements and test methods |
| EN 14600:2005 | Doorsets and openable windows with fire resisting and/or smoke control characteristics - Requirements and classification |
| EN 13659:2015 | Shutters and external venetian blinds - Performance requirements including safety |
| EN 14637:2007 | Building hardware - Electrically controlled hold-open systems for fire/smoke door assemblies - Requirements, test methods, application and maintenance |
| EN 16580:2015 | Windows and doors - Wetness and splash water proof door leaves - Test and classification |
| EN 15496:2008 | Cycles - Requirements and test methods for cycle locks |
| EN 179:2008 | Building hardware - Emergency exit devices operated by a lever handle or push pad, for use on escape routes - Requirements and test methods |
| EN 15644:2008 | Traditionally designed prefabricated stairs made of solid wood - Specifications and requirements |
| NF EN 13126-1 : 2012 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS HARDWARE FOR WINDOWS AND DOOR HEIGHT WINDOWS - PART 1: REQUIREMENTS COMMON TO ALL TYPES OF HARDWARE |
| EN 1935:2002/AC:2003 | BUILDING HARDWARE - SINGLE-AXIS HINGES - REQUIREMENTS AND TEST METHODS |
| EN 1906:2012 | Building hardware - Lever handles and knob furniture - Requirements and test methods |
| BS EN 13126-13:2012 | Building hardware. Hardware for windows and balcony doors. Requirements and test methods Sash balances |
| BS EN 13126-11:2008 | Building hardware. Requirements and test methods for windows and doors height windows Top hung projecting reversible hardware |
| 03/102518 DC : 0 | BS EN 13637 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED EMERGENCY EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| 15/30298547 DC : 0 | BS EN 14846 - BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS |
| DIN EN 13126-19:2011-05 | Building hardware - Requirements and test methods for windows and door height windows - Part 19: Sliding Closing Devices |
| DD CEN/TS 13126-9:2004 | Building hardware, fittings for windows and door height windows. Requirements and test methods Pivot hinges |
| DIN EN 14846:2015-07 (Draft) | BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS |
| I.S. TS 13126-13:2004 | BUILDING HARDWARE, FITTINGS FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 13: SASH BALANCES |
| DIN EN 13126-5:2015-01 | Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 5: Devices that restrict the opening of windows and door height windows; German version EN 13126-5:2011+A1:2014 |
| DD CEN/TS 13126-3:2004 | Building hardware, fittings for windows and door height windows. Requirements and test methods Manoeuvring fittings for espagnolette bolts/sliding button |
| DIN EN 15644:2009-03 | TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS |
| DD CEN/TS 13126-2:2004 | Building hardware, fittings for windows and door height windows. Requirements and test methods Casement fastener handles |
| BS EN 13126-5 : 2011 | BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 5: DEVICES THAT RESTRICT THE OPENING OF WINDOWS AND DOOR HEIGHT WINDOWS |
| 09/30185845 DC : 0 | BS EN 13126-5 - BUILDING HARDWARE - SPECIFICATIONS FOR THE FITTINGS FOR THE OPERATION OF WINDOWS AND DOOR HEIGHT WINDOWS - PART 5: SPECIFICATION FOR DEVICES THAT RESTRICT THE OPENING OF WINDOWS |
| BS EN 13126-2:2011 | Building hardware. Requirements and test methods for windows and doors height windows Window fastener handles |
| DIN EN 14846 E : 2008 | BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 15496:2008 | CYCLES - REQUIREMENTS AND TEST METHODS FOR CYCLE LOCKS |
| 10/30203644 DC : 0 | BS EN 12320 - BUILDING HARDWARE - PADLOCKS AND PADLOCK FITTINGS - REQUIREMENTS AND TEST METHODS |
| DD CEN/TS 13126-16:2004 | Building hardware, fittings for windows and door height windows. Requirements and test methods Fittings for lift and slide systems |
| 03/102562 DC : 0 | EN 179 - BUILDING HARDWARE - EMERGENCY EXIT DEVICES OPERATED BY A LEVER HANDLE OR PUSH PAD, FOR USE ON ESCAPE ROUTES |
| 15/30298556 DC : DRAFT FEB 2015 | BS EN 13637 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| UNI EN 13126-14 : 2012 | BUILDING HARDWARE - HARDWARE FOR WINDOWS AND BALCONY DOORS - REQUIREMENTS AND TEST METHODS - PART 14: SASH FASTENERS |
| I.S. EN 13126-17:2008 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 17: HARDWARE FOR TILT&SLIDE WINDOWS AND DOORS |
| 09/30185830 DC : DRAFT FEB 2009 | BS EN 15887 - BUILDING HARDWARE - UNCONTROLLED DOOR CLOSING DEVICES FOR SINGLE ACTION DOORS - REQUIREMENTS AND TEST METHODS |
| DD CEN/TS 13126-15:2004 | Building hardware, fittings for windows and door height windows. Requirements and test methods Rollers |
| I.S. TS 13126-16:2004 | BUILDING HARDWARE, FITTINGS FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 16: FITTINGS FOR LIFT AND SLIDE SYSTEMS |
| DIN EN 13637:2015-12 | BUILDING HARDWARE - ELECTRICALLY CONTROLLED EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| 16/30343249 DC : 0 | BS EN 179 - BUILDING HARDWARE - EMERGENCY EXIT DEVICES OPERATED BY A LEVER HANDLE OR PUSH PAD, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| DIN EN 13126-12:2009-03 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 12: SIDE HUNG PROJECTING REVERSIBLE HARDWARE |
| S.R. CEN/TS 16819:2015 | POSTAL SERVICES - PARCEL BOXES FOR END USE - TECHNICAL FEATURES |
| I.S. EN 15684:2012 | BUILDING HARDWARE - MECHATRONIC CYLINDERS - REQUIREMENTS AND TEST METHODS |
| PREN 13561 : DRAFT 2014 | EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| UNE-EN 13126-3:2012 | Building hardware - Hardware for windows and door-height windows - Requirements and test methods - Part 3: Handles, primarily for Tilt&Turn, Tilt-First and Turn-Only hardware |
| BS EN 13126-16:2008 | Building hardware. Requirements and test methods for windows and doors height windows Hardware for Lift&Slide windows and doors |
| UNI EN 13126-13 : 2012 | Building hardware - Hardware for windows and door-height windows - Requirements and test methods - Part 3: Handles, primarily for Tilt&Turn, Tilt-First and Turn-Only hardware |
| UNI EN 13126-2 : 2011 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 2: WINDOW FASTENER HANDLES |
| UNI EN 13126-11 : 2009 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 11: TOP HUNG PROJECTING REVERSIBLE HARDWARE |
| 18/30361299 DC : 0 | BS EN 13126-15 - QUINCAILLERIE POUR LE BATIMENT - FERRURES DE DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 15: ROLLERS FOR HORIZONTAL SLIDING AND HARDWARE FOR SLIDING FOLDING WINDOWS |
| NF EN 13126-3 : 2012 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOOR-HEIGHT WINDOWS - PART 3: HANDLES, PRIMARILY FOR TILT AND TURN, TILT-FIRST AND TURN-ONLY HARDWARE |
| UNI EN 13126-4 : 2009 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 4: ESPAGNOLETTES |
| EN 13126-6:2008 | Building hardware - Requirements and test methods for windows and doors height windows - Part 6: Variable geometry stay hinges (with or without a friction stay) |
| I.S. EN 1154:1997 | BUILDING HARDWARE - CONTROLLED DOOR CLOSING DEVICES - REQUIREMENTS AND TEST METHODS |
| BS EN 13120:2009+A1:2014 | Internal blinds. Performance requirements including safety |
| DIN EN 13659:2015-07 | SHUTTERS AND EXTERNAL VENETIAN BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| DIN EN 179:2008-04 | Building hardware - Emergency exit devices operated by a lever handle or push pad, for use on escape routes - Requirements and test methods |
| UNE-EN 1303:2016 | Building hardware - Cylinders for locks - Requirements and test methods |
| BS EN 1906:2012 | Building hardware. Lever handles and knob furniture. Requirements and test methods |
| BS EN 13659:2015 | Shutters and external venetian blinds. Performance requirements including safety |
| BS EN 13724:2013 | Postal services. Apertures of private letter boxes and letter plates. Requirements and test methods |
| BS EN 1155:1997 | Building hardware. Electrically powered hold-open devices for swing doors. Requirements and test methods |
| UNE-EN 12320:2015 | Building hardware - Padlocks and padlock fittings - Requirements and test methods |
| CEN/TS 13126-3:2004 | Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 3: Manoeuvring fittings for espagnolette bolts/sliding button |
| CEN/TS 13126-16:2004 | Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 16: Fittings for lift and slide systems |
| EN 1154:1996/A1:2002/AC:2006 | BUILDING HARDWARE - CONTROLLED DOOR CLOSING DEVICES - REQUIREMENTS AND TEST METHODS |
| CEN/TS 13126-13:2004 | Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 13: Sash balances |
| EN 1158:1997/A1:2002/AC:2006 | BUILDING HARDWARE - DOOR COORDINATOR DEVICES - REQUIREMENTS AND TEST METHODS |
| EN 13126-7:2007 | Building hardware - Requirements and test methods for windows and door height windows - Part 7: Finger catches |
| DIN EN 16864:2017-11 | BUILDING HARDWARE - MECHATRONIC PADLOCKS - REQUIREMENTS AND TEST METHODS |
| EN 13126-3:2011 | Building hardware - Hardware for windows and door-height windows - Requirements and test methods - Part 3: Handles, primarily for Tilt&Turn, Tilt-First and Turn-Only hardware |
| EN 13126-10:2008 | Building hardware - Requirements and test methods for windows and doors height windows - Part 10: Arm-balancing systems |
| DIN EN 14600:2006-03 | DOORSETS AND OPENABLE WINDOWS WITH FIRE RESISTING AND/OR SMOKE CONTROL CHARACTERISTICS - REQUIREMENTS AND CLASSIFICATION |
| EN 12320:2012 | Building hardware - Padlocks and padlock fittings - Requirements and test methods |
| DIN EN 13126-17:2008-04 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 17: HARDWARE FOR TILT&SLIDE WINDOWS AND DOORS |
| DIN EN 13126-15:2008-04 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 15: ROLLERS FOR HORIZONTAL SLIDING AND SLIDING FOLDING WINDOWS AND DOORS |
| DIN EN 14637:2008-01 | Building hardware - Electrically controlled hold-open systems for fire/smoke door assemblies - Requirements, test methods, application and maintenance |
| EN 13126-12:2008 | Building hardware - Requirements and test methods for windows and doors height windows - Part 12: Side hung projecting reversible hardware |
| CEN/TS 13126-6:2004 | Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 6: Variable geometry stay hinges (with or without a friction system) |
| CEN/TS 13126-10:2004 | Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 10: Arm balancing systems |
| EN 1155:1997/A1:2002/AC:2006 | BUILDING HARDWARE - ELECTRICALLY POWERED HOLD-OPEN DEVICES FOR SWING DOORS - REQUIREMENTS AND TEST METHODS |
| UNI EN 12320 : 2012 | BUILDING HARDWARE - PADLOCKS AND PADLOCK FITTINGS - REQUIREMENTS AND TEST METHODS |
| EN 12209:2016 | Building hardware - Mechanically operated locks and locking plates - Requirements and test methods |
| CEN/TS 13126-15:2004 | Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 15: Rollers |
| EN 13126-9:2013 | Building hardware - Requirements and test methods for windows and door height windows - Part 9: Hardware for horizontal and vertical pivot windows |
| DIN EN 14648:2007-12 | Building hardware - Fittings for shutters - Requirements and test methods |
| CEN/TS 13126-11:2004 | Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 11: Top hung projecting reversible hardware |
| DIN 50021:1988-06 | SPRAY TESTS WITH DIFFERENT SODIUM CHLORIDE SOLUTIONS |
| ISO 7599:2010 | Anodizing of aluminium and its alloys General specifications for anodic oxidation coatings on aluminium |
| EN ISO 4628-2:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016) |
| ISO 10683:2014 | Fasteners Non-electrolytically applied zinc flake coatings |
| ISO 4541:1978 | Metallic and other non-organic coatings Corrodkote corrosion test (CORR test) |
| EN ISO 4541 : 1994 | METALLIC AND OTHER NON-ORGANIC COATINGS - CORRODKOTE CORROSION TEST (CORR TEST) |
| 89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
| EN 12540 : 2000 | CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF NICKEL, NICKEL PLUS CHROMIUM, COPPER PLUS NICKEL AND COPPER PLUS NICKEL PLUS CHROMIUM |
| EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
| ISO 1458:2002 | Metallic coatings Electrodeposited coatings of nickel |
| ISO 2081:2008 | Metallic and other inorganic coatings Electroplated coatings of zinc with supplementary treatments on iron or steel |
| EN ISO 6988:1994 | Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture (ISO 6988:1985) |
| ISO 1456:2009 | Metallic and other inorganic coatings — Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium |
| ISO 4628-3:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 3: Assessment of degree of rusting |
| EN ISO 4628-3:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016) |
| ISO 12944-2:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments |
| EN ISO 10289 : 2001 | Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates - Rating of test specimens and manufactured articles subjected to corrosion tests (ISO 10289:1999) |
| EN ISO 10683:2014 | Fasteners - Non-electrolytically applied zinc flake coatings (ISO 10683:2014) |
| ISO 4520:1981 | Chromate conversion coatings on electroplated zinc and cadmium coatings |
| EN 12329 : 2000 | CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENT ON IRON OR STEEL |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| DIN 50961:2012-04 | ELECTROPLATED COATINGS - ZINC COATINGS ON IRON OR STEEL - TERMS, TESTING AND CORROSION RESISTANCE |
| ISO 8565:2011 | Metals and alloys Atmospheric corrosion testing General requirements |
| ISO 10289:1999 | Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates Rating of test specimens and manufactured articles subjected to corrosion tests |
| ISO 6988:1985 | Metallic and other non organic coatings Sulfur dioxide test with general condensation of moisture |
| EN ISO 8565:2011 | Metals and alloys - Atmospheric corrosion testing - General requirements (ISO 8565:2011) |
| ISO 4628-2:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering |
| ISO 4525:2003 | Metallic coatings Electroplated coatings of nickel plus chromium on plastics materials |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.