• There are no items in your cart

EN 1677-2:2000+A1:2008

Current
Current

The latest, up-to-date edition.

Components for slings - Safety - Part 2: Forged steel lifting hooks with latch, Grade 8
Published date

04-02-2008

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Hazards
5 Safety requirements
  5.1 Design
  5.2 Dimensions
  5.3 Materials and heat treatment
  5.4 Manufacturing methods and workmanship
  5.5 Mechanical properties
  5.6 Hook latches
6 Verification of safety requirements
  6.1 Qualification of personnel
  6.2 Type tests
  6.3 Manufacturing test regime and acceptance criteria
  6.4 Hook latches
7 Marking
8 Manufacturer's certificate
9 Instructions for use
Annex A (informative) - Bases for the calculation of hook
        dimensions
Annex B (informative) - Designation system for hooks - Grade 8
  B.1 Designation
  B.2 General format
Annex ZA (informative) - Relationship between this European
         Standard and the Essential Requirements of EU
         Directive 98/37/EC
Annex ZB (informative) - Relationship between this European
         Standard and the Essential Requirements of EU
         Directive 2006/42/EC

This Part of EN 1677 specifies requirements for forged steel lifting hooks with latch of grade 8 having eye or clevis and pin up to 63 t WLL, mainly for use in:-chain slings according to EN 818-4-steel wire rope slings according to prEN 13414-1:1999-textile slings according to prEN 1492-1:2000, prEN 1492-2:2000intended for lifting objects, materials or goods.This Part of EN 1677 does not apply to hand forged hooks.The hazards covered by this Part of EN 1677 are identified in clause 4.Annex A is informative, and gives the bases for calculation of hook dimensions.Annex B is informative, and gives an example of a designation system for hooks of grade 8.Annexes ZA and ZB give the relationship with EU-Directives.

Committee
CEN/TC 168
DevelopmentNote
2000 Edition Re-Issued in April 2008 & incorporates AMD 1 2008. (04/2008)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

BS ISO 20474-1:2017 Earth-moving machinery. Safety General requirements
DIN EN 13071-3:2011-12 STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 3: RECOMMENDED LIFTING CONNECTIONS
PREN 474-1 : DRAFT 2017 EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
07/30163456 DC : 0 BS ISO 20474-1 - EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
DIN EN 474-1:2014-03 EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
13/30280057 DC : 0 BS EN 13782 - TEMPORARY STRUCTURE - TENTS - SAFETY
BS EN 13414-2 : 2003 STEEL WIRE ROPE SLINGS - SAFETY - PART 2: SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER
BS EN 1492-4 : 2004 TEXTILE SLINGS - SAFETY - PART 4: LIFTING SLINGS FOR GENERAL SERVICE MADE FROM NATURAL AND MAN-MADE FIBRE ROPES
I.S. EN 13414-2:2003 STEEL WIRE ROPE SLINGS - SAFETY - PART 2: SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER
DIN EN 13414-2:2009-02 STEEL WIRE ROPE SLINGS - SAFETY - PART 2: SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER
DIN EN 13414-1:2009-02 STEEL WIRE ROPE SLINGS - SAFETY - PART 1: SLINGS FOR GENERAL LIFTING SERVICE
EN 12195-4:2003 Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes
EN 12195-3:2001 Load restraint assemblies on road vehicles - Safety - Part 3: Lashing chains
EN 13414-1:2003+A2:2008 Steel wire rope slings - Safety - Part 1: Slings for general lifting service
EN 474-1:2006+A5:2018 Earth-moving machinery - Safety - Part 1: General requirements
PREN 13155 : DRAFT 2017 CRANES - NON-FIXED LOAD LIFTING ATTACHMENTS
BS EN 474-1 : 2006 EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN 474-1:2006+A6:2019 Earth-moving machinery. Safety General requirements
NF EN 13071-3 : 2011 STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 3: RECOMMENDED LIFTING CONNECTIONS
DIN EN 1492-4:2009-02 TEXTILE SLINGS - SAFETY - PART 4: LIFTING SLINGS FOR GENERAL SERVICE MADE FROM NATURAL AND MAN-MADE FIBRE ROPES
DIN EN 13157:2010-07 Cranes - Safety - Hand powered cranes (includes Amendment A1:2009)
DIN EN 12195-4:2004-04 Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes
BS EN 13414-1 : 2003 STEEL WIRE ROPE SLINGS - SAFETY - PART 1: SLINGS FOR GENERAL LIFTING SERVICE
BS EN 474-9 : 2006 EARTH-MOVING MACHINERY - SAFETY - PART 9: REQUIREMENTS FOR PIPELAYERS
I.S. EN 13414-1:2003 STEEL WIRE ROPE SLINGS - SAFETY - PART 1: SLINGS FOR GENERAL LIFTING SERVICE
I.S. EN 818-6:2000 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 6: CHAIN SLINGS - SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER
I.S. EN 1492-4:2004 TEXTILE SLINGS - SAFETY - PART 4: LIFTING SLINGS FOR GENERAL SERVICE MADE FROM NATURAL AND MAN-MADE FIBRE ROPES
I.S. EN 474-9:2006 EARTH-MOVING MACHINERY - SAFETY - PART 9: REQUIREMENTS FOR PIPELAYERS
I.S. EN 818-4:1997 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 4: CHAIN SLINGS - GRADE 8
VDI 2700 Blatt 19:2011-01 Securing of loads on road vehicles - Rolled steel strip, sheets, and section steel
UNE-EN 13071-3:2012 Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 3: Recommended lifting connections
I.S. EN 474-1:2006 EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
I.S. EN 13071-3:2011 STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 3: RECOMMENDED LIFTING CONNECTIONS
UNI EN 13071-3 : 2011 STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 3: RECOMMENDED LIFTING CONNECTIONS
ISO 20474-1:2017 Earth-moving machinery — Safety — Part 1: General requirements
DIN EN 474-9:2010-04 Earth-moving machinery - Safety - Part 9: Requirements for pipelayers (includes Amendment A1:2009)
BS EN 12195-3:2001 Load restraint assemblies on road vehicles. Safety Lashing chains
UNI EN 818-4 : 2008 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 4: CHAIN SLINGS - GRADE 8
UNI EN 13414-2 : 2009 STEEL WIRE ROPE SLINGS - SAFETY - PART 2: SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER
UNI EN 818-6 : 2008 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 6: CHAIN SLINGS - SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER
UNI EN 13157 : 2009 CRANES - SAFETY - HAND POWERED CRANES
UNI EN 13414-1 : 2009 STEEL WIRE ROPE SLINGS - SAFETY - PART 1: SLINGS FOR GENERAL LIFTING SERVICE
UNI EN 474-9 : 2009 EARTH-MOVING MACHINERY - SAFETY - PART 9: REQUIREMENTS FOR PIPELAYERS
UNI EN 1492-4 : 2009 TEXTILE SLINGS - SAFETY - PART 4: LIFTING SLINGS FOR GENERAL SERVICE MADE FROM NATURAL AND MAN-MADE FIBRE ROPES
PREN 474-9 : DRAFT 2017 EARTH-MOVING MACHINERY - SAFETY - PART 9: REQUIREMENTS FOR PIPELAYERS
95/704659 DC : DRAFT MAR 1995 PREN 1872 - MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR MINING VENTILATION MACHINERY - ELECTRICALLY DRIVEN FANS FOR UNDERGROUND USE
10/30212165 DC : 0 BS EN 13071-3 - STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 3: RECOMMENDED LIFTING CONNECTIONS
DIN EN 818-6:2008-12 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 6: CHAIN SLINGS - SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER
BS EN 818-4 : 1997 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 4: CHAIN SLINGS - GRADE 8
BS EN 12195-4:2003 Load restraint assemblies on road vehicles. Safety Lashing steel wire ropes
EN 818-6:2000+A1:2008 Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer
EN 1492-4:2004+A1:2008 Textile slings - Safety - Part 4: Lifting slings for general service made from natural and man-made fibre ropes
EN 818-4:1996+A1:2008 Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8
EN 474-9:2006+A1:2009 Earth-moving machinery - Safety - Part 9: Requirements for pipelayers
07/30163493 DC : 0 BS ISO 20474-9 - EARTH-MOVING MACHINERY - SAFETY - PART 9: REQUIREMENTS FOR PIPELAYERS
BS EN 13071-3:2011 Stationary waste containers up to 5000 l, top lifted and bottom emptied Recommended lifting connections
17/30360261 DC : 0 BS EN 13135 - CRANE - SAFETY - NON-FIXED LOAD LIFTING ATTACHMENTS
GOST R EN 818-4 : 2005 SHORT LINK CHAINS FOR LIFTING PURPOSES - SAFETY - PART 4: CHAIN SLINGS GRADE 8
DIN EN 13414-1 E : 2009 STEEL WIRE ROPE SLINGS - SAFETY - PART 1: SLINGS FOR GENERAL LIFTING SERVICE
DIN EN 13414-2 E : 2009 STEEL WIRE ROPE SLINGS - SAFETY - PART 2: SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER
BS EN 818-6 : 2000 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 6: CHAIN SLINGS - SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER
EN 13071-3:2011 Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 3: Recommended lifting connections
EN 13414-2:2003+A2:2008 Steel wire rope slings - Safety - Part 2: Specification for information for use and maintenance to be provided by the manufacturer
DIN EN 818-4:2008-12 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 4: CHAIN SLINGS - GRADE 8

EN 1050 : 1996 SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT
EN 292-1 : 1991 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - BASIC TERMINOLOGY, METHODOLOGY
EN 818-4:1996+A1:2008 Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8
EN 1492-2:2000+A1:2008 Textile slings - Safety - Part 2: Roundslings made of man-made fibres for general purpose use
EN 1677-1:2000+A1:2008 Components for slings - Safety - Part 1: Forged steel components, Grade 8
EN 818-6:2000+A1:2008 Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer
EN 1492-1:2000+A1:2008 Textile slings - Safety - Part 1: Flat woven webbing slings made of man-made fibres for general purpose use
EN 292-2 : 91 AMD 1 95 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION
PREN 13414-1 : DRAFT 1998 STEEL WIRE ROPE SLINGS - SAFETY - PART 1: WIRE ROPE SLINGS
1998/37/EC : 1998 DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.