• There are no items in your cart

EN 1993-1-3:2006/AC:2009

Current
Current

The latest, up-to-date edition.

EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-3: GENERAL RULES - SUPPLEMENTARY RULES FOR COLD-FORMED MEMBERS AND SHEETING
Published date

11-11-2009

1 Introduction
   1.1 Scope
   1.2 Normative references
   1.3 Terms and definitions
   1.4 Symbols
   1.5 Terminology and conventions for dimensions
2 Basis of design
3 Materials
   3.1 General
   3.2 Structural steel
   3.3 Connecting devices
4 Durability
5 Structural analysis
   5.1 Influence of rounded corners
   5.2 Geometrical proportions
   5.3 Structural modelling for analysis
   5.4 Flange curling
   5.5 Local and distortional buckling
   5.6 Plate buckling between fasteners
6 Ultimate limit states
   6.1 Resistance of cross-sections
   6.2 Buckling resistance
   6.3 Bending and axial tension
7 Serviceability limit states
   7.1 General
   7.2 Plastic deformation
   7.3 Deflections
8 Design of joints
   8.1 General
   8.2 Splices and end connections of members subject to
        compression
   8.3 Connections with mechanical fasteners
   8.4 Spot welds
   8.5 Lap welds
9 Design assisted by testing
10 Special considerations for purlins, liner trays and sheetings
   10.1 Beams restrained by sheeting
   10.2 Liner trays restrained by sheeting
   10.3 Stressed skin design
   10.4 Perforated sheeting
Annex A [normative] - Testing procedures
   A.1 General
   A.2 Tests on profiled sheets and liner trays
   A.3 Tests on cold-formed members
   A.4 Tests on structures and portions of structures
   A.5 Tests on torsionally restrained beams
   A.6 Evaluation of test results
Annex B [informative] - Durability of fasteners
Annex C [informative] - Cross section constants for thin-walled
                        cross sections
   C.1 Open cross sections
   C.2 Cross section constants for open cross section with
        branches
   C.3 Torsion constant and shear centre of cross section with
        closed part
Annex D [informative] - Mixed effective width/effective thickness
                        method for outstand elements
Annex E [Informative] - Simplified design for purlins

Defines design requirements for cold-formed members and sheeting. Also applies to cold-formed steel products made from coated or uncoated hot or cold rolled sheet or strip, that have been cold-formed by such processes as cold-rolled forming or press-braking.

Committee
TC 250
DevelopmentNote
Supersedes ENV 1993-1-3. (12/2006)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

I.S. EN 13121-3:2016 GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP
UNE-EN 50341-1:2017 Overhead electrical lines exceeding AC 1 kV - Part 1: General requirements - Common specifications
I.S. EN 1993-5:2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 5: PILING (INCLUDING IRISH NATIONAL ANNEX)
UNI EN 15512 : 2009 STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING SYSTEMS - PRINCIPLES FOR STRUCTURAL DESIGN
BS EN 1090-5:2017 Execution of steel structures and aluminium structures Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications
UNE-EN 1993-1-7:2013 Eurocode 3 - Design of steel structures - Part 1-7: Plated structures subject to out of plane loading
BS EN 15635:2008 Steel static storage systems. Application and maintenance of storage equipment
BS EN 15620:2008 Steel static storage systems. Adjustable pallet racking. Tolerances, deformations and clearances
UNE-EN 1994-1-1:2013 Eurocode 4: Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings
I.S. EN 1090-2:2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
BS EN 1993-4-2 : 2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-2: TANKS
BS EN 50341-1:2012 Overhead electrical lines exceeding AC 1 kV General requirements. Common specifications
EN 15620:2008 Steel static storage systems - Adjustable pallet racking - Tolerances, deformations and clearances
UNE-EN 15512:2010 Steel static storage systems - Adjustable pallet racking systems - Principles for structural design
16/30336501 DC : 0 BS EN 16951-2 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS
14/30297831 DC : 0 BS EN 1090-4 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 4: TECHNICAL REQUIREMENTS FOR THIN-GAUGE, COLD-FORMED STEEL ELEMENTS AND STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
EN 1993-1-6:2007/A1:2017 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-6: STRENGTH AND STABILITY OF SHELL STRUCTURES
EN 1993-4-2:2007/A1:2017 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-2: TANKS
DIN EN 1993-1-2:2010-12 Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design (includes Corrigendum AC:2009)
DIN EN 1994-1-1:2010-12 Eurocode 4: Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings (includes Corrigendum AC:2009)
BS EN 506:2008 Roofing products of metal sheet. Specification for self-supporting products of copper or zinc sheet
BS EN 1993-1-7:2007 Eurocode 3. Design of steel structures Plated structures subject to out of plane loading
BS EN 1993-1-4 : 2006 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS
BS EN 1993-5:2007 Eurocode 3. Design of steel structures Piling
UNI EN 508-3 : 2008 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 3: STAINLESS STEEL
DIN EN 14195:2015-03 METAL FRAMING COMPONENTS FOR GYPSUM BOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 1090-5:2017-07 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
DIN EN 508-1:2000-12 ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 1: STEEL
DIN EN 1090-2:2011-10 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
EN 508-3:2008 Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel
UNI EN 508-1 : 2014 ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 1: STEEL
EN 13121-3:2016 GRP tanks and vessels for use above ground - Part 3: Design and workmanship
EN 13374:2013 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
17/30337809 DC : DRAFT JAN 2017 BS EN 15512 - STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING SYSTEMS - PRINCIPLES FOR STRUCTURAL DESIGN
11/30251991 DC : 0 BS EN 14195 - METAL FRAMING COMPONENTS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
CSA S136-12 PACKAGE : 2012 CONSISTS OF S136-12 - NORTH AMERICAN SPECIFICATION FOR THE DESIGN OF COLD-FORMED STEEL STRUCTURAL MEMBERS AND S136.1-12 - COMMENTARY ON NORTH AMERICAN SPECIFICATION FOR THE DESIGN OF COLD-FORMED STEEL STRUCTURAL MEMBERS
UNI EN 15620 : 2009 STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING - TOLERANCES, DEFORMATIONS AND CLEARANCES
07/30168410 DC : DRAFT DEC 2007 BS EN 508-3 - ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 3: STAINLESS STEEL
UNE-EN 1994-2:2013 Eurocode 4 - Design of composite steen and concrete structures - Part 2: General rules and rules for bridges
UNE-EN 1993-1-6:2013 Eurocode 3 - Design of steel structures - Part 1-6: Strength and Stability of Shell Structures
I.S. EN 13374:2013 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
I.S. EN 50341-1:2012 OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
EN 50341-1:2012 Overhead electrical lines exceeding AC 1 kV - Part 1: General requirements - Common specifications
UNE-EN 13374:2013 Temporary edge protection systems - Product specification - Test methods
BS EN 1090-2 : 2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
DIN EN 1090-2:2015-07 (Draft) EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
DIN EN 1993-4-3:2010-12 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 4-3: PIPELINES
DIN EN 1993-1-3:2010-12 Eurocode 3: Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting (includes Corrigendum AC:2009)
DIN EN 508-3:2009-07 Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel
BS EN 14195:2014 Metal framing components for gypsum board systems. Definitions, requirements and test methods
BS EN 15095 : 2007 POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
BS EN 14389-1:2015 Road traffic noise reducing devices. Procedures for assessing long term performance Acoustical characteristics
I.S. EN 14389-2:2015 ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS
I.S. EN 1993-1-4:2006 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS (INCLUDING IRISH NATIONAL ANNEX)
EN 508-1:2014 Roofing and cladding products from metal sheet - Specification for self-supporting of steel, aluminium or stainless steel sheet - Part 1: Steel
EN 15512:2009 Steel static storage systems - Adjustable pallet racking systems - Principles for structural design
DIN EN 1993-1-6:2010-12 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-6: STRENGTH AND STABILITY OF SHELL STRUCTURES
I.S. EN 1994-2:2005 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 2: GENERAL RULES AND RULES FOR BRIDGES (INCLUDING IRISH NATIONAL ANNEX)
I.S. EN 15095:2007 POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
I.S. EN 1993-4-3:2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-3: PIPELINES
I.S. EN 1994-1-1:2005 EUROCODE 4: DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS (INCLUDING IRISH NATIONAL ANNEX)
I.S. EN 508-3:2008 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELFSUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 3: STAINLESS STEEL
I.S. EN 508-1:2014 ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 1: STEEL
I.S. EN 14195:2014 METAL FRAMING COMPONENTS FOR GYPSUM BOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 13121-3:2016-10 GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP
DIN EN 13374:2013-07 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
I.S. EN 14389-1:2015 ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS
I.S. EN 506:2008 ROOFING PRODUCTS OF METAL SHEET - SPECIFICATION FOR SELFSUPPORTING PRODUCTS OF COPPER OR ZINC SHEET
I.S. EN 1993-1-7:2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-7: PLATED STRUCTURES SUBJECT TO OUT OF PLANE LOADING (INCLUDING IRISH NATIONAL ANNEX)
UNI EN 1993-1-7 : 2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-7: PLATED STRUCTURES SUBJECT TO OUT OF PLANE LOADING
DIN EN 15635:2009-08 STEEL STATIC STORAGE SYSTEMS - APPLICATION AND MAINTENANCE OF STORAGE EQUIPMENT
I.S. EN 15512:2009 STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING SYSTEMS - PRINCIPLES FOR STRUCTURAL DESIGN
PREN 14782 : DRAFT 2015 SELF-SUPPORTING METAL SHEET FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
DIN EN 1090-5 E : 2017 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
I.S. EN 1993-4-2:2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-2: TANKS
UNI EN 15635 : 2009 STEEL STATIC STORAGE SYSTEMS - APPLICATION AND MAINTENANCE OF STORAGE EQUIPMENT
UNI EN 1090-2 : 2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
UNE-EN 1090-2:2011 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
BS EN 13121-3:2016 GRP tanks and vessels for use above ground Design and workmanship
CEI EN 50341-1 : 2013 OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
UNE-EN 13121-3:2017 GRP tanks and vessels for use above ground - Part 3: Design and workmanship
PREN 1090-4 : DRAFT 2014 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 4: TECHNICAL REQUIREMENTS FOR THIN-GAUGE, COLD-FORMED STEEL ELEMENTS AND STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
EN 1090-2:2008+A1:2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
I.S. EN 15620:2008 STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING - TOLERANCES, DEFORMATIONS AND CLEARANCES
EN 1993-4-1:2007/A1:2017 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-1: SILOS
I.S. EN 1993-4-1:2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-1: SILOS
EN 1993-1-4:2006/A1:2015 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS
DIN EN 1993-1-7:2010-12 Eurocode 3: Design of steel structures - Part 1-7: Plated structures subject to out of plane loading (includes Corrigendum AC:2009)
DIN EN 1993-1-4:2015-10 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS
DIN EN 508-1:2014-08 Roofing and cladding products from metal sheet - Specification for self-supporting of steel, aluminium or stainless steel sheet - Part 1: Steel
DIN EN 15095 E : 2009 POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
DIN EN 506:2009-07 This European Standard specifies requirements for self-supporting roofing products for discontinuous laying made from copper or zinc-copper-titanium alloy sheet with or without additional organic coatings.
DIN EN 1994-2:2010-12 Eurocode 4: Design of composite steel and concrete structures - Part 2: General rules and rules for bridges (includes Corrigendum AC:2008)
BS EN 1993-4-3:2007 Eurocode 3. Design of steel structures Pipelines
BS EN 1993-1-3:2006 Eurocode 3. Design of steel structures General rules - Supplementary rules for cold-formed members and sheeting
UNE-EN 508-3:2010 Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel
EN 1993-5:2007/AC:2009 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 5: PILING
EN 1993-1-2:2005/AC:2009 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
EN 506:2008 Roofing products of metal sheet - Specification for self-supporting products of copper or zinc sheet
UNI EN 15095 : 2009 POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
UNI EN 1993-5 : 2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 5: PILING
UNI EN 13374 : 2013 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
UNI EN 506 : 2008 ROOFING PRODUCTS OF METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF COPPER OR ZINC SHEET
UNI EN 1994-2 : 2006 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 2: GENERAL RULES AND RULES FOR BRIDGES
UNI EN 1993-4-3 : 2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-3: PIPELINES
UNI EN 1993-1-2 : 2005 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
UNI EN 1994-1-1 : 2005 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
12/30260570 DC : 0 BS EN 50341-1 - OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
14/30298583 DC : 0 BS EN 13121-3 - GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP
DIN EN 1993-4-2:2017-09 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 4-2: TANKS
DIN EN 15620 E : 2010 STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING - TOLERANCES, DEFORMATIONS AND CLEARANCES
DIN EN 15620:2010-05 Steel static storage systems - Adjustable pallet racking - Tolerances, deformations and clearances
UNE-EN 14389-1:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics
DIN EN 15512 E : 2010 STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING SYSTEMS - PRINCIPLES FOR STRUCTURAL DESIGN
BS EN 1993-1-6 : 2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-6: STRENGTH AND STABILITY OF SHELL STRUCTURES
15/30326160 DC : 0 BS EN 16951-1 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTIC CHARACTERISTICS
PREN 14195 : DRAFT 2011 METAL FRAMING COMPONENTS FOR GYPSUM BOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
PREN 13031-1 : DRAFT 2017 GREENHOUSES - DESIGN AND CONSTRUCTION - PART 1: COMMERCIAL PRODUCTION GREENHOUSES
BS EN 508-1:2014 Roofing and cladding products from metal sheet. Specification for self-supporting of steel, aluminium or stainless steel sheet Steel
BS EN 1994-2:2005 Eurocode 4. Design of composite steel and concrete structures General rules and rules for bridges
BS EN 14389-2:2015 Road traffic noise reducing devices. Procedures for assessing long term performance Non-acoustical characteristics
UNE-EN 14389-2:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics
BS EN 508-3:2008 Roofing products from metal sheet. Specification for self-supporting products of steel, aluminium or stainless steel sheet Stainless steel
UNE-EN 506:2010 Roofing products of metal sheet - Specification for self-supporting products of copper or zinc sheet
UNE-EN 14195:2015 Metal framing components for gypsum board systems - Definitions, requirements and test methods
BS EN 13374 : 2013 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
BS EN 1994-1-1:2004 Eurocode 4. Design of composite steel and concrete structures General rules and rules for buildings
UNE-EN 1993-1-3:2012 Eurocode 3 - Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting
DIN EN 15095:2009-06 POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
EN 1994-1-1:2004/AC:2009 EUROCODE 4: DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
EN 1994-2:2005/AC:2008 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 2: GENERAL RULES AND RULES FOR BRIDGES
EN 14389-2:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics
EN 15635:2008 Steel static storage systems - Application and maintenance of storage equipment
EN 1993-4-3:2007/AC:2009 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-3: PIPELINES
EN 14389-1:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics
EN 1993-1-7:2007/AC:2009 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-7: PLATED STRUCTURES SUBJECT TO OUT OF PLANE LOADING
EN 14195:2014 Metal framing components for gypsum board systems - Definitions, requirements and test methods
EN 15095:2007+A1:2008 Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements
PREN 50341-1 : DRAFT 2012 OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
BS EN 1993-4-1 : 2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-1: SILOS
UNE-EN 1993-1-2:2016 Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design
11/30250535 DC : DRAFT DEC 2011 BS EN 13374 - TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
UNE-EN 1993-1-4:2012 Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels
PREN 16951-2 : DRAFT 2016 RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS
DIN EN 15512:2010-09 Steel static storage systems - Adjustable pallet racking systems - Principles for structural design
DIN EN 1993-4-1:2017-09 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 4-1: SILOS
BS EN 15512:2009 Steel static storage systems. Adjustable pallet racking systems. Principles for structural design
DIN EN 15635 E : 2009 STEEL STATIC STORAGE SYSTEMS - APPLICATION AND MAINTENANCE OF STORAGE EQUIPMENT
UNE-EN 15635:2010 Steel static storage systems - Application and maintenance of storage equipment
KTA 3205.2 : 2015 COR 2016 COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS - PART 2: COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS FOR PRESSURE AND ACTIVITY-RETAINING COMPONENTS IN SYSTEMS OUTSIDE THE PRIMARY CIRCUIT
17/30354665 DC : 0 BS EN 13031-1 - GREENHOUSES - DESIGN AND CONSTRUCTION - PART 1: COMMERCIAL PRODUCTION GREENHOUSES
I.S. EN 1090-5:2017 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
I.S. EN 15635:2008 STEEL STATIC STORAGE SYSTEMS - APPLICATION AND MAINTENANCE OF STORAGE EQUIPMENT
I.S. EN 1993-1-6:2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-6: STRENGTH AND STABILITY OF SHELL STRUCTURES
BS EN 1993-1-2:2005 Eurocode 3. Design of steel structures General rules - Structural fire design
UNE-EN 508-1:2014 Roofing and cladding products from metal sheet - Specification for self-supporting of steel, aluminium or stainless steel sheet - Part 1: Steel
EN 1090-5:2017 Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications
DIN EN 1993-5:2010-12 Eurocode 3: Design of steel structures - Part 5: Piling (includes Corrigendum AC:2009)

EN ISO 1479:2011 Hexagon head tapping screws (ISO 1479:2011)
EN 10002-1 : 2001 METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE
EN ISO 7049:2011 Cross-recessed pan head tapping screws (ISO 7049:2011)
EN 10025-4:2004 Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
EN 10268:2006+A1:2013 COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
EN 1993-1-5:2006/A1:2017 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-5: PLATED STRUCTURAL ELEMENTS
EN 1994-1-1:2004/AC:2009 EUROCODE 4: DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
EN 10149-2:2013 Hot rolled flat products made of high yield strength steels for cold forming - Part 2: Technical delivery conditions for thermomechanically rolled steels
EN 10025-1:2004 Hot rolled products of structural steels - Part 1: General technical delivery conditions
EN 10327:2004 Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions
EN 1994-1-2:2005/A1:2014 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
EN 10326:2004 Continuously hot-dip coated strip and sheet of structural steels - Technical delivery conditions
EN ISO 2702:2011 Heat-treated steel tapping screws - Mechanical properties (ISO 2702:2011)
EN 1993-1-4:2006/A1:2015 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS
ISO 12944-2:2017 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments
EN 10143:2006 (edition 2) Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape
EN 10025-5:2004 Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
EN 10204:2004 Metallic products - Types of inspection documents
EN 10025-2:2004/AC:2005 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
ISO 4997:2015 Cold-reduced carbon steel sheet of structural quality
EN 1090-2:2008+A1:2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
EN 10292:2007 Continuously hot-dip coated strip and sheet of steels with high yield strength for cold forming - Technical delivery conditions
EN 1993-1-9:2005/AC:2009 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-9: FATIGUE
EN 1994-2:2005/AC:2008 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 2: GENERAL RULES AND RULES FOR BRIDGES
EN ISO 10684:2004/AC:2009 Fasteners - Hot dip galvanized coatings (ISO 10684:2004/Cor 1:2008)
EN 1993-1-2:2005/AC:2009 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
EN 1993-1-8:2005/AC:2009 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-8: DESIGN OF JOINTS
EN 10025-3:2004 Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
EN 1993-1-7:2007/AC:2009 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-7: PLATED STRUCTURES SUBJECT TO OUT OF PLANE LOADING
EN 1993-1-12:2007/AC:2009 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-12: ADDITIONAL RULES FOR THE EXTENSION OF EN 1993 UP TO STEEL GRADES S 700
EN 10149-3:2013 Hot rolled flat products made of high yield strength steels for cold forming - Part 3: Technical delivery conditions for normalized or normalized rolled steels
EN 1993-1-10:2005/AC:2009 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-10: MATERIAL TOUGHNESS AND THROUGH-THICKNESS PROPERTIES
EN 1993-1-11:2006/AC:2009 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-11: DESIGN OF STRUCTURES WITH TENSION COMPONENTS
EN 508-1:2014 Roofing and cladding products from metal sheet - Specification for self-supporting of steel, aluminium or stainless steel sheet - Part 1: Steel
EN 1993-1-1:2005/A1:2014 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.