EN 2032-2 : 1994
Current
Current
The latest, up-to-date edition.
AEROSPACE SERIES - METALLIC MATERIALS - CODING OF METALLURGICAL CONDITION IN DELIVERY CONDITION
Published date
03-28-1994
Publisher
Foreword
1 Scope
2 Normative references
3 Principle
4 Allocated codes
5 Instructions for use
This standard specifies the code letters to be allocated to define the metallurgical condition of metallic semi-finished products in delivery conditions, for aerospace applications.
| DevelopmentNote |
Supersedes PREN 2032/2. (11/2003)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN 2032-2 : 1994 | Identical |
| DIN EN 2032-2:1994-05 | Identical |
| UNE-EN 2032-2:1996 | Identical |
| BS EN 2032-2:1994 | Identical |
| NS EN 2032-2 : 1ED 1994 | Identical |
| PN EN 2032-2 : 2001 | Identical |
| NEN EN 2032-2 : 1994 | Identical |
| NBN EN 2032-2 : 1994 | Identical |
| I.S. EN 2032-2:1994 | Identical |
| UNI EN 2032-2 : 1994 | Identical |
| SNV DIN EN 2032-2 : 1994 | Identical |
| UNE-EN 2032-2:1994 | Identical |
| BS EN 3875:2017 | Aerospace series. Metallic materials, Filler metal for brazing. Technical specification |
| BS EN 4700-001:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Plate, sheet and strip |
| 00/705877 DC : 0 | PREN 4400-3 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 3: BAR AND SECTION |
| 01/716045 DC : 0 | PREN 4800-7 - AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 7: RE-MELTING STOCK |
| NF EN 2117 : 2009 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P5056A (5056A)-H32 - WIRE FOR SOLID RIVETS - D <= 10 MM |
| 13/30290101 DC : 0 | BS EN 4700-2 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| I.S. EN 3354:2013 | AEROSPACE SERIES - TITANIUM ALLOY TI-6AL-4V - ANNEALED - SHEET FOR SUPERPLASTIC FORMING - A <= 6 MM |
| BS EN 3813:2013 | Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Annealed. Bar and wire for forged fasteners. D<sub>e</sub> ≤ 50 mm |
| UNI EN 4685 : 2011 | AEROSPACE SERIES - TITANIUM TI10V2FE3AL - BARS - D < 110 MM - R[M] >= 1240 MPA |
| UNI EN 4700-006 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| 05/30129551 DC : 0 | PREN 4700-5 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 5: FORGING STOCK |
| 01/710777 DC : 0 | PREN 3875 - AEROSPACE SERIES - METALLIC MATERIALS - FILLER METAL FOR BRAZING - TECHNICAL SPECIFICATION |
| NF EN 4685 : 2012 | AEROSPACE SERIES - TITANIUM TI10V2FE3AL - BARS - D < 110 MM - R[M] > OR = 1240 MPA |
| BS EN 3310:2011 | Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Not heat treated. Forging stock, for annealed forgings. De ≤ 360 mm |
| BS EN 4700-005:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Forging stock |
| XP PREN 3359 : 1996 XP | AEROSPACE SERIES - STEEL FE-PM1503 (X3CRNIMOAI13.8.2) - VACUUM INDUCTION MELTED AND REMELTED - AS FORGED - FORGING STOCK - A OR D LESS THAN OR EQUAL TO 300MM |
| I.S. EN 4685:2011 | AEROSPACE SERIES - TITANIUM TI10V2FE3AL - BARS - D < 110 MM - R[M] >= 1240 MPA |
| BS EN 4372:2009 | Aerospace series. Heat resisting nickel alloy with copper NI-PD9001 (NiCu31). Wire for solid rivets. D ≤ 10 mm |
| PREN 2299 : 200P2 | AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NI-P96HT - SOLUTION TREATED AND PRECIPITATION TREATED - TUBE |
| PREN 2770 : 200P1 | AEROSPACE SERIES - STEEL FE-PL53S - HARDENED AND TEMPERED - 1050 <= R[M]<= 1220 MPA - SHEET AND PLATE - 0,5 <= A <= 12 MM |
| NF EN 3115 : 2009 | AEROSPACE SERIES - ALUMINIUM ALLOY 7050-T73 - WIRE FOR SOLID RIVETS - D <= 10 MM |
| UNI EN 4800-006 : 2011 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| PREN 2115 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY 2117-T42 WIRE FOR SOLID RIVETS D <= 10 MM |
| PREN 4400-6 : 200P1 | AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM- ALLOYS - TECHNICAL SPECIFICATION - PART 6: ALUMINIUM ALLOY FORGING STOCK |
| PREN 3312 : 200P3 | AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AI-4V) - ANNEALED - FORGINGS - D[E] <= 150 MM |
| PREN 2769 : 200P2 | AEROSPACE SERIES - STEEL FE-PL53S - HARDENED AND TEMPERED -1030 <= R[M] <= 1180 MPA - FORGINGS - D[E] <= 70 MM |
| PREN 3337 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY (7010) - SOLUTION TREATED AND ARTIFICIALLY AGED (T74511) - EXTRUDED BARS AND SECTIONS - (A OR D) <= 130 MM WITH PERIPHERAL COARSE GRAIN CONTROL |
| PREN 3353 : 200P1 | AEROSPACE SERIES - TITANIUM ALLOY TI-P63 - SOLUTION TREATED AND AGED - R[M] >= 1100 MPA - BAR AND WIRE FOR FASTENERS MACHINED - D[E] <= 25 MM |
| PREN 3481 : 200P1 | AEROSPACE SERIES - STEEL FE-PA13 - ANNEALED - REFERENCE HEAT TREATMENT: SOFTENED - HOLLOW BARS - 5 <= A <= 12 MM |
| PREN 3489 : 200P1 | AEROSPACE SERIES - STEEL FE-PA13 - SOFTENED - 500 <= R[M] <= 750 MPA - TUBES FOR STRUCTURES - 0,5 <= A <= 5 MM |
| PREN 3513 : 200P1 | AEROSPACE SERIES - STEEL FE-PL711 - HARDENED AND TEMPERED - 900 <= R[M] <= 1100 MPA - BAR AND WIRE - D[E] <= 45 MM |
| PREN 2296 : 200P2 | AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NI-P96 - MELTED IN AIR - SOLUTION TREATED AND PRECIPITATION TREATED - R[M] >= 1080 MPA - FORGINGS |
| PREN 3456 : 200P3 | AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AL-4V) - ANNEALED - SHEET AND STRIP, HOT ROLLED - A <= 6 MM |
| PREN 3471 : 200P1 | AEROSPACE SERIES - STEEL FE-PA18 - QUENCHED AND COLD DRAWN - STRIP FOR SPRING A <= 4.0 MM |
| PREN 3482 : 200P1 | AEROSPACE SERIES - STEEL FE-PA13 - ANNEALED REFERENCE HEAT TREATMENT: SOFTENED - FORGING STOCK - D[E] <= 100 MM |
| PREN 2600 : 200P1 | AEROSPACE SERIES - DESIGNATION OF METALLIC SEMI-FINISHED PRODUCTS - RULES |
| PREN 3514 : 200P1 | AEROSPACE SERIES - STEEL FE-PL711 - HARDENED AND TEMPERED - 1100 <= R[M] <= 1300 MPA - BAR AND WIRE FOR BOLTS - D[E] <= 25 MM |
| PREN 3551 : 200P2 | AEROSPACE SERIES - ALUMINIUM ALLOY (7150) - SOLUTION TREATED, STRETCHED AND ARTIFICIALLY AGED (T6511) - EXTRUDED BARS AND SECTIONS - (A OR D) <= 90 MM |
| PREN 2669 : 200P2 | AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NI-P96 - MELTED UNDER VACUUM - NOT HEAT TREATED - REFERENCE HEAT TREATMENT: SOLUTION TREATED AND PRECIPITATION TREATED - FORGING STOCK |
| PREN 4700-004 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 4: WIRE |
| PREN 4700-005 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| PREN 4400-4 : DRAFT 2003 | AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM-ALLOYS - TECHNICAL SPECIFICATION - PART 4: ALUMINIUM AND ALUMINIUM ALLOY TUBE |
| PREN 4800-006 : 200P2 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 6: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| PREN 4372 : 200P2 | AEROSPACE SERIES - HEAT RESISTING NICKEL ALLOY WITH COPPER NI-PD9001 (NICU31) - WIRE FOR SOLID RIVETS - D <= 10 MM |
| PREN 4800-005 : 200P2 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 5: FORGING STOCK |
| PREN 3813 : 200P2 | AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AI-4V) - ANNEALED - BAR AND WIRE FOR FORGED FASTENERS - D[E] <= 50 MM |
| PREN 6000 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2024-T351 - PLATE 6,0 MM < A <= 55 MM - CLOSE-TOLERANCE FLATNESS |
| PREN 3554 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY (7010) - SOLUTION TREATED, COLD COMPRESSED AND ARTIFICIALLY AGED (T7652) - HAND FORGINGS A <= 200 MM |
| PREN 4700-006 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| PREN 4800-003 : 200P2 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 3: TUBE |
| PREN 3879 : 200P2 | AEROSPACE SERIES - METALLIC MATERIALS - FILLER METAL FOR WELDING - TECHNICAL SPECIFICATION |
| PREN 4685 : 200P1 | AEROSPACE SERIES - TITANIUM TI10V2FE3AL - BARS - D < 110 MM - R[M] >= 1240 MPA |
| I.S. EN 3355:2012 | AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AL-4V) - ANNEALED - EXTRUDED SECTION - D[E] <= 150 MM - 900 MPA <= R[M] <= 1160 MPA |
| I.S. EN 3312:2012 | AEROSPACE SERIES - TITANIUM ALLOY TI-6AL-4V - ANNEALED - FORGINGS - D[E] <= 150 MM |
| UNI EN 3355 : 2013 | AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AL-4V) - ANNEALED - EXTRUDED SECTION - D[E] <= 150 MM - 900 MPA <= R[M] <= 1160 MPA |
| I.S. EN 3351:2012 | AEROSPACE SERIES - TITANIUM ALLOY TI-4AL-4MO-2SN - SOLUTION TREATED AND AGED - FORGINGS - D[E] <= 150 MM |
| I.S. EN 4700-007:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
| NF EN 4700-007 : 2012 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
| BS EN 3351:2012 | Aerospace series. Titanium alloy Ti-4Al-4Mo-2Sn. Solution treated and aged. Forgings. De ≤ 150 mm |
| 01/710778 DC : 0 | PREN 3879 - AEROSPACE SERIES - METALLIC MATERIALS - FILLER METAL FOR WELDING - TECHNICAL SPECIFICATION |
| BS EN 4700-006:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Pre-production and production forgings |
| 10/30228108 DC : 0 | BS EN 4400-9 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM- ALLOYS - TECHNICAL SPECIFICATION - PART 9: PRE-PRODUCTION AND PRODUCTION CASTINGS |
| BS EN 4500-001:2012 | Aerospace series. Metallic materials. Rules for drafting and presentation of material standards General rules |
| BS EN 3464:2012 | Aerospace series. Titanium alloy (Ti-6Al-4V). Annealed. Plate. 6 mm < a ≤ 100 mm |
| 11/30247408 DC : 0 | BS EN 2402 - AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NI-PH1201 (NI-P91-HT) - ANNEALED - WIRE D <= 10 MM |
| EN 4700-002:2016 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 002: Bar and section |
| NF EN 2115 : 2009 | AEROSPACE SERIES - ALUMINIUM ALLOY 2117-T42 - WIRE FOR SOLID RIVETS - D <= 10 MM |
| BS EN 4685:2011 | Aerospace series. Titanium Ti10V2Fe3Al. Bars. D < 110 mm. Rm ≥ 1240 MPa |
| NF EN 2116 : 2009 | AEROSPACE SERIES - ALUMINIUM ALLOY 2017A-T42 - WIRE FOR SOLID RIVETS - D <= 10 MM |
| UNI EN 4800-004 : 2011 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 004: WIRE |
| UNI EN 4500-001 : 2014 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 001: GENERAL RULES |
| NF EN 4700-005 : 2012 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| 09/30201382 DC : 0 | BS EN 4685 - AEROSPACE SERIES - TITANIUM TI10V2FE3AL - BARS - D < 110 MM - R[M] >= 1240 MPA |
| UNI EN 4800-005 : 2011 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| PREN 2298 : 200P2 | AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NI-P96HT - SOLUTION TREATED AND PRECIPITATION TREATED - R[M] >= 1080 MPA - SHEET AND STRIP - 0,25 < A <= 3 MM |
| I.S. EN 4800-006:2010 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| PREN 3123 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-C27 - SOLUTION TREATED AND ARTIFICIALLY AGED (T6) - STRUCTURAL PRECISION CASTINGS |
| 01/716043 DC : 0 | PREN 4800-5 - AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 5: FORGING STOCK |
| NF EN 4800-003 : 2012 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 003: TUBE |
| PREN 3367 : 200P1 | AEROSPACE SERIES - STEEL FE-PL10 - HARDENED, TEMPERED AND COLD DRAWN - 1260 <= R[M] <= 2790 MPA - WIRE FOR SPRING - 0,20 <= D <= 10,50 MM |
| PREN 3348 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY (2024) - SOLUTION TREATED AND ARTIFICIALLY AGED (T62) - PLATE - 6 <= A <= 50 MM |
| PREN 3351 : 200P3 | AEROSPACE SERIES - TITANIUM ALLOY TI-4AL-4MO-2SN - SOLUTION TREATED AND AGED - FORGINGS - D[E] <= 150MM |
| PREN 3115 : 200P2 | AEROSPACE SERIES - ALUMINIUM ALLOY 7050- T73 WIRE FOR SOLID RIVETS D <= 10 MM |
| PREN 2541 : 200P2 | AEROSPACE SERIES - STEEL FE-PA 18 QUENCHED AND COLD DRAWN - WIRE FOR SPRING - D <= 4,0 MM |
| PREN 2919 : 200P2 | AEROSPACE SERIES - STEEL FE-PL72 - CARBURIZED, HARDENED AND TEMPERED - BAR - D[E] <= 160 MM |
| PREN 3486 : 200P1 | AEROSPACE SERIES - STEEL FE-PM67 - SOLUTION ANNEALED AND PRECIPITATION HARDENED - 1400 <= R[M] <= 1550 MPA - FORGINGS - D[E] <= 100 MM |
| PREN 3366 : 200P1 | AEROSPACE SERIES - STEEL FE-CM68 - AS MANUFACTURED - REFERENCE HEAT TREATMENT: SOLUTION TREATED - REMELTING STOCK |
| PREN 3329 : 200P1 | AEROSPACE SERIES - STEEL FE-PL45 - ANNEALED - SHEET AND STRIP - 0,3 <= A <= 2 MM FOR PREVAILING TORQUE NUTS |
| PREN 3340 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY (7050) - SOLUTION TREATED AND ARTIFICIALLY AGED (T76) - DIE FORGINGS - A <= 200 MM |
| PREN 4800-001 : 200P2 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 1: PLATE, SHEET AND STRIP |
| I.S. EN 3464:2012 | AEROSPACE SERIES - TITANIUM ALLOY TI-6AL-4V - ANNEALED - PLATE - 6 MM < A <= 100 MM |
| I.S. EN 4800-002:2010 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| NF EN 4800-006 : 2012 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| NF EN 4800-002 : 2012 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| UNI EN 4700-007 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
| I.S. EN 4700-006:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| NF EN 4700-002 : 2012 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| EN 3875:2017 | Aerospace series - Metallic materials, Filler metal for brazing - Technical specification |
| BS EN 3312:2012 | Aerospace series. Titanium alloy Ti-6Al-4V. Annealed. Forgings De ≤ 150 mm |
| BS EN 4700-004:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Wire |
| 95/705079 DC : 0 | TR 2410 - AEROSPACE SERIES - RELATIONSHIP BETWEEN DIMENSIONAL STANDARDS AND METALLIC MATERIAL STANDARDS |
| NF EN 4800-005 : 2012 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| UNI EN 4700-005 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| 95/712874 DC : 0 | PREN 4500-1 - AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 1: GENERAL RULES |
| UNI EN 3456 : 2013 | AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AL-4V) - ANNEALED - SHEET AND STRIP, HOT ROLLED - A <= 6 MM |
| BS EN 2117:2009 | Aerospace series. Aluminium alloy AL-P5056A (5056A)-H32. Wire for solid rivets. D ≤ 10 mm |
| BS EN 4700-002:2016 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Bar and section |
| 03/306584 DC : 0 | EN 4400-5 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM-ALLOY PRODUCTS - TECHNICAL SPECIFICATION - PART 5: ALUMINIUM AND ALUMINIUM ALLOY RIVET WIRE |
| BS EN 3456:2012 | Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Annealed. Sheet and strip, hot rolled. a ≤ 6 mm |
| UNI EN 4700-004 : 2011 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire |
| BS EN 4800-006:2010 | Aerospace series. Titanium and titanium alloys. Technical specification Pre-production and production forgings |
| UNI EN 3813 : 2013 | AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AL-4V) - ANNEALED - BAR AND WIRE FOR FORGED FASTENERS - DE <= 50 MM |
| BS EN 4800-005:2010 | Aerospace series. Titanium and titanium alloys. Technical specification Forging stock |
| 02/708860 DC : 0 | PREN 4800-1 - AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 1: PLATE, SHEET AND STRIP |
| XP PREN 3364 : 1996 XP | AEROSPACE SERIES - STEEL FE-PM64 - SOFTENED - REFERENCE HEAT TREATMENT: SOLUTION ANNEALED AND PRECIPITATION HARDENED - FORGING STOCK - DE =< 300 MM |
| BS EN 4800-004:2010 | Aerospace series. Titanium and titanium alloys. Technical specification Wire |
| UNI EN 4800-008 : 2011 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 008: PRE-PRODUCTION AND PRODUCTION CASTINGS |
| BS EN 3115:2009 | Aerospace series. Aluminium alloy 7050-T73. Wire for solid rivets. D ≤ 10 mm |
| NF EN 4700-006 : 2012 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| BS EN 2116:2009 | Aerospace series. Aluminium alloy 2017A-T42. Wire for solid rivets. D ≤ 10 mm |
| PREN 2920 : 200P2 | AEROSPACE SERIES - STEEL FE-PL72 - CARBURIZED, HARDENED AND TEMPERED - FORGINGS - D[E] <= 160 MM |
| PREN 3363 : 200P1 | AEROSPACE SERIES - STEEL FE-CM68 - SOLUTION TREATED - R[M] >= 485 MPA - SAND OR INVESTMENT CASTING |
| UNI EN 3351 : 2013 | AEROSPACE SERIES - TITANIUM ALLOY TI-4AL-4MO-2SN - SOLUTION TREATED AND AGED - FORGINGS - D[E] <= 150 MM |
| PREN 2295 : 200P2 | AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NI-P96 - MELTED IN AIR - NON TREATED - FORGING STOCK |
| PREN 2297 : 200P1 | AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NI-P96HT - SOLUTION TREATED AND PRECIPITATION TREATED - R[M] >= 1080 MPA - BAR AND SECTIONS FOR WELDED RINGS |
| PREN 3550 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY (2024) - SOLUTION TREATED, STRETCHED AND ARTIFICIALLY AGED (T8511) - EXTRUDED BARS AND SECTIONS - (A OR D) <= 150 MM |
| PREN 3355 : 200P3 | AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AI-4V) - ANNEALED - EXTRUDED SECTION - D[E] <= 150 MM - 900 MPA <= R[M] <= 1160 MM MPA |
| PREN 3343 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY (7010) - SOLUTION TREATED AND ARTIFICIALLY AGED (T76511) - EXTRUDED BARS AND SECTIONS - 1 < (A OR D) <= 130 MM WITH PERIPHERAL COARSE GRAIN CONTROL |
| PREN 3485 : 200P1 | AEROSPACE SERIES - STEEL FE-CM61 - HOMOGENISED, SOLUTION TREATED, PRECIPITATION HARDENED AND SUB ZERO - R[M] >= 830 MPA - MEDIUM STRENGTH - SAND OR INVESTMENT CASTING |
| PREN 3484 : 200P1 | AEROSPACE SERIES - STEEL FE-CM61 - AS CAST - REFERENCE HEAT TREATMENT: HOMOGENISED, SOLUTION TREATED, PRECIPITATION HARDENED AND SUB ZERO - REMELTING STOCK |
| PREN 3530 : 200P1 | AEROSPACE SERIES - STEEL FE-PA95 - SOFTENED - REFERENCE HEAT TREATMENT: SOLUTION TREATED AND PRECIPITATION TREATED - FORGING STOCK - D[E] <= 200 MM |
| PREN 3492 : 200P1 | AEROSPACE SERIES - STEEL FE-PM44 - HARDENED AND TEMPERED - BAR FOR MACHINING - D[E] <= 150 MM |
| PREN 3349 : 200P2 | AEROSPACE SERIES - MAGNESIUM ALLOY MG-C92 - SOLUTION TREATED AND ARTIFICIALLY AGED (T6) - CASTING |
| PREN 3310 : 200P3 | AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AL-4V) - NOT HEAT TREATED - FORGING STOCK, FOR ANNEALED FORGINGS - D[E] <= 360 MM |
| PREN 3464 : 200P3 | AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AL-4V) - ANNEALED - PLATE - 6 MM < A <= 100 MM |
| BS EN 3355:2012 | Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Annealed. Extruded section. De ≤ 150 mm. 900 MPa ≤ Rm ≤ 1 160 MPa |
| UNI EN 4700-003 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE |
| NF EN 4700-003 : 2012 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE |
| I.S. EN 4800-004:2010 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 004: WIRE |
| UNI EN 4800-007 : 2011 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
| I.S. EN 2115:2009 | AEROSPACE SERIES - ALUMINIUM ALLOY 2117-T42 - WIRE FOR SOLID RIVETS - D <= 10 MM |
| EN 3310 : 2011 | AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AL-4V) - NOT HEAT TREATED - FORGING STOCK, FOR ANNEALED FORGINGS - D[E] <= 360 MM |
| UNI EN 4800-001 : 2011 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
| NF EN 4800-008 : 2012 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 008: PRE-PRODUCTION AND PRODUCTION CASTINGS |
| NF EN 4800-007 : 2012 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
| UNI EN 3464 : 2013 | AEROSPACE SERIES - TITANIUM ALLOY TI-6AL-4V - ANNEALED - PLATE - 6 MM < A <= 100 MM |
| BS EN 4800-008:2010 | Aerospace series. Titanium and titanium alloys. Technical specification Pre-production and production castings |
| UNI EN 4800-003 : 2011 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 003: TUBE |
| 10/30239356 DC : 0 | BS EN 4500-1 - AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 1: GENERAL RULES |
| UNI EN 3310 : 2012 | AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AL-4V) - NOT HEAT TREATED - FORGING STOCK, FOR ANNEALED FORGINGS - D[E] <= 360 MM |
| I.S. EN 4700-002:2016 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| 01/716046 DC : 0 | PREN 4800-8 - AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 8: PRE-PRODUCTION AND PRODUCTION CASTINGS |
| BS EN 4700-003:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Tube |
| BS EN 4800-001:2010 | Aerospace series. Titanium and titanium alloys. Technical specification Plate, sheet and strip |
| BS EN 4800-002:2010 | Aerospace series. Titanium and titanium alloys. Technical specification Bar and section |
| 03/306585 DC : 0 | EN 4400-7 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM- ALLOY PRODUCTS - TECHNICAL SPECIFICATION - PART 7: ALUMINIUM ALLOY FORGINGS |
| BS EN 4800-003:2010 | Aerospace series. Titanium and titanium alloys. Technical specification Tube |
| PREN 2633 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2024 - T3511 - EXTRUDED BARS AND SECTIONS 1,2 MM <= D[E] <= 160 MM WITH PERIPHERAL COARSE GRAIN CONTROL |
| PREN 3330 : 200P1 | AEROSPACE SERIES - STEEL FE-PL45 - ANNEALED - BAR AND WIRE - D[E] <= 40 MM FOR PREVAILING TORQUE NUTS |
| PREN 3122 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-C27 - SOLUTION TREATED AND ARTIFICIALLY AGED (T6) - HIGH STRENGTH - STRUCTURAL PRECISION CASTINGS |
| 01/716044 DC : 0 | EN 4800-6 - AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 6: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| NF EN 4700-001 : 2012 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
| PREN 2670 : 200P2 | AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NI-P96 - MELTED UNDER VACUUM - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS |
| NF EN 4700-004 : 2012 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 004: WIRE |
| PREN 2767 : 200P2 | AEROSPACE SERIES - STEEL FE-PL79 - CARBURIZED, HARDENED AND TEMPERED - 1180 <= R[M] <= 1550 MPA - BAR FOR MACHINING - D[E] <= 150 MM |
| PREN 4700-003 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE |
| NF EN 4800-004 : 2012 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 004: WIRE |
| PREN 3458 : 200P1 | AEROSPACE SERIES - TITANIUM ALLOY TI-P63 - ANNEALED - 900 <= R[M] <= 1160 MPA - BAR AND WIRE FOR FASTENERS MACHINED - D[E] <= 25 MM |
| 05/30129555 DC : 0 | PREN 4700-6 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 6: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| PREN 3493 : 200P1 | AEROSPACE SERIES - STEEL FE-PL48 - HARDENED AND TEMPERED - 1050 <= R[M] <= 1250 MPA - FORGINGS - D[E] <= 40 MM |
| PREN 3345 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY (7150) - SOLUTION TREATED, WATER QUENCHED CONTROLLED STRETCHED AND ARTIFICIALLY AGED (T6511) - EXTRUDED BAR AND SECTION - (A OR D) <= 90 MM WITH PERIPHERAL COARSE GRAIN CONTROL |
| PREN 3354 : 200P4 | AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AI-4V) - ANNEALED - SHEET FOR SUPERPLASTIC FORMING - A <= 6 MM |
| PREN 4800-002 : 200P2 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 2: BAR AND SECTION |
| PREN 4800-008 : 200P2 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 8: PRE-PRODUCTION AND PRODUCTION CASTINGS |
| I.S. EN 2117:2009 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P5056A (5056A)-H32 - WIRE FOR SOLID RIVETS - D <= 10 MM |
| I.S. EN 4800-005:2010 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| I.S. EN 4700-001:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
| NF EN 4800-001 : 2012 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
| UNI EN 4700-001 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
| I.S. EN 2116:2009 | AEROSPACE SERIES - ALUMINIUM ALLOY 2017A-T42 - WIRE FOR SOLID RIVETS - D <= 10 MM |
| I.S. EN 4700-005:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| I.S. EN 3115:2009 | AEROSPACE SERIES - ALUMINIUM ALLOY 7050-T73 - WIRE FOR SOLID RIVETS - D <= 10 MM |
| I.S. EN 3875:2017 | AEROSPACE SERIES - METALLIC MATERIALS, FILLER METAL FOR BRAZING - TECHNICAL SPECIFICATION |
| BS EN 4258:1998 | Metallic materials. General organization of standardization. Links between types of EN standards and their use |
| EN 4800-003:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 003: Tube |
| EN 3456:2012 | Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Sheet and strip, hot rolled — a ≤ 6 mm |
| EN 4800-002:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 002: Bar and section |
| EN 3355 : 2012 | Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Extruded section - De ≤ 150 mm - 900 MPa ≤ Rm ≤ 1 160 MPa |
| EN 3464:2012 | Aerospace series - Titanium alloy Ti-6Al-4V - Annealed - Plate - 6 mm < a ≤ 100 mm |
| EN 4800-001:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 001: Plate, sheet and strip |
| EN 4372:2009 | Aerospace series - Heat resisting nickel alloy with copper NI-PD9001 (NiCu31) - Wire for solid rivets - D ≤ 10 mm |
| EN 4700-005:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 005: Forging stock |
| EN 4258:1998 | Aerospace series - Metallic materials - General organization of standardization - Links between types of EN standards and their use |
| EN 4700-003:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 003: Tube |
| EN 2117 : 2009 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P5056A (5056A)-H32 - WIRE FOR SOLID RIVETS - D <= 10 MM |
| EN 2115:2009 | Aerospace series - Aluminium alloy 2117-T42 - Wire for solid rivets - D ≤ 10 mm |
| EN 3351 : 2012 | AEROSPACE SERIES - TITANIUM ALLOY TI-4AL-4MO-2SN - SOLUTION TREATED AND AGED - FORGINGS - D[E] <= 150 MM |
| EN 4500-001:2012 | Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 001: General rules |
| EN 4700-007:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 007: Remelting stock |
| EN 3813:2013 | Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Bar and wire for forged fasteners - De ≤ 50 mm |
| EN 4800-004:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 004: Wire |
| EN 2116 : 2009 | AEROSPACE SERIES - ALUMINIUM ALLOY 2017A-T42 - WIRE FOR SOLID RIVETS - D <= 10 MM |
| EN 3115:2009 | Aerospace series - Aluminium alloy 7050-T73 - Wire for solid rivets — D ≤ 10 mm |
| EN 3354 : 2013 | AEROSPACE SERIES - TITANIUM ALLOY TI-6AL-4V - ANNEALED - SHEET FOR SUPERPLASTIC FORMING - A <= 6 MM |
| EN 4800-008:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 008: Pre-production and production castings |
| EN 4800-007:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 007: Remelting stock |
| EN 4700-004:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire |
| EN 4800-005:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 005: Forging stock |
| EN 4700-001:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 001: Plate, sheet and strip |
| EN 4800-006:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 006: Pre-production and production forgings |
| EN 4685:2011 | Aerospace series - Titanium Ti10V2Fe3Al - Bars - D < 110 mm - Rm ≥ 1 240 MPa |
| EN 4700-006:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 006: Pre-production and production forgings |
| 07/30157997 DC : 0 | EN 2116 - AEROSPACE SERIES - ALUMINIUM ALLOY 2017A-T42 - WIRE FOR SOLID RIVETS - D <= 10 MM |
| 05/30129558 DC : 0 | PREN 4700-7 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 7: REMELTING STOCK |
| BS EN 2115:2009 | Aerospace series. Aluminium alloy 2117-T42. Wire for solid rivets. D ≤ 10 mm |
| I.S. EN 3310:2011 | AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AL-4V) - NOT HEAT TREATED - FORGING STOCK, FOR ANNEALED FORGINGS - D[E] <= 360 MM |
| I.S. EN 4700-003:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE |
| I.S. EN 4372:2009 | AEROSPACE SERIES - HEAT RESISTING NICKEL ALLOY WITH COPPER NI-PD9001 (NICU31) - WIRE FOR SOLID RIVETS - D <= 10 MM |
| BS EN 3354:2013 | Aerospace series. Titanium alloy Ti-6Al-4V. Annealed. Sheet for superplastic forming. a ≤ 6 mm |
| BS EN 4700-007:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Remelting stock |
| I.S. EN 4800-003:2010 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 003: TUBE |
| NF EN 4372 : 2009 | AEROSPACE SERIES - HEAT RESISTING NICKEL ALLOY WITH COPPER NI-PD9001 (NICU31) - WIRE FOR SOLID RIVETS - D <= 10 MM |
| XP PREN 4258 : 1996 XP | AEROSPACE SERIES - METALLIC MATERIALS - GENERAL ORGANIZATION OF STANDARDIZATION - LINKS BETWEEN TYPES OF EN STANDARDS AND THEIR USE |
| BS EN 4800-007:2010 | Aerospace series. Titanium and titanium alloys Remelting stock |
| I.S. EN 4800-007:2010 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
| 03/310514 DC : 0 | BS EN 4400-4 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM-ALLOYS - TECHNICAL SPECIFICATION - PART 4: ALUMINIUM AND ALUMINIUM ALLOY TUBE |
| PREN 3875 : 200P2 | AEROSPACE SERIES - METALLIC MATERIALS - FILLER METAL FOR BRAZING - TECHNICAL SPECIFICATION |
| PREN 2542 : 200P2 | AEROSPACE SERIES - STEEL FE-PL43S - ANNEALED - BAR AND WIRE - D[E] <= 40 MM FOR PREVAILING TORQUE NUTS |
| PREN 2768 : 200P2 | AEROSPACE SERIES - STEEL FE-PL79 - CARBURIZED, HARDENED AND TEMPERED -1180 <= R[M] <= 1550 MPA - FORGINGS - D[E] <= 150 MM |
| PREN 2771 : 200P2 | AEROSPACE SERIES - STEEL FE-PL53S - HARDENED AND TEMPERED - 1100 <= R[M] <= 1250 MPA - BAR - D[E] <= 110 MM |
| PREN 2780 : 200P1 | AEROSPACE SERIES - STEEL FE-PL56 - HARDENED AND TEMPERED - 1250 <= R[M] <= 1400 MPA - FORGINGS - D[E] <= 70 MM |
| NF EN 3310 : 2012 | AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AI-4V) - NOT HEAT TREATED - FORGING STOCK, FOR ANNEALED FORGINGS - D[E] < OR = 360 MM |
| PREN 2779 : 200P1 | AEROSPACE SERIES - STEEL FE-PL56 - HARDENED AND TEMPERED - 1250 <= R[M] <= 1400 MPA - BAR - D[E] <= 70 MM |
| PREN 2543 : 200P2 | AEROSPACE SERIES - STEEL FE-PL43S - ANNEALED - SHEET AND STRIP - 0,3 <= A <= 2 MM FOR PREVAILING TORQUE NUTS |
| PREN 3478 : 200P1 | AEROSPACE SERIES - STEEL FE-PM63 - SOLUTION ANNEALED, TRANSFORMATION TREATED AND PRECIPITATION HARDENED - 1310 <= R[M] <= 1550 MPA - SHEET AND STRIP - A <= 6 MM |
| PREN 3555 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY (7075) - SOLUTION TREATED, CONTROLLED STRETCHED AND ARTIFICIALLY AGED (T79510) - EXTRUDED BARS AND SECTION 1.2 < (A OR D) <= 100 MM - WITH PERIPHERAL COARSE GRAIN CONTROL |
| PREN 4800-007 : 200P2 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 7: REMELTING STOCK |
| PREN 2117 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P5056A (5056A)-H32 WIRE FOR SOLID RIVETS D <= 10 MM |
| PREN 2116 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY 2017A T42 WIRE FOR SOLID RIVETS D <= 10 MM |
| PREN 4700-007 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
| I.S. EN 3456:2012 | AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AL-4V) - ANNEALED - SHEET AND STRIP, HOT ROLLED - A <= 6 MM |
| PREN 4800-004 : 200P2 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 4: WIRE |
| PREN 4700-001 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
| PREN 3468 : 200P1 | AEROSPACE SERIES - STEEL FE-PA13 - SOFTENED - 500 < R[M] <= 700 MPA - FORGINGS - D[E] <= 100 MM |
| PREN 3522 : 200P1 | AEROSPACE SERIES - STEEL FE-PL79 - SOFTENED - REFERENCE HEAT TREATMENT: CARBURIZED, HARDENED AND TEMPERED - FORGING STOCK - D[E] <= 200 MM |
| PREN 4700-002 : 200P3 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| PREN 4500-001 : 200P2 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 001: GENERAL RULES |
| UNI EN 4800-002 : 2011 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| I.S. EN 4800-001:2010 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
| I.S. EN 4800-008:2010 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 008: PRE-PRODUCTION AND PRODUCTION CASTINGS |
| I.S. EN 4700-004:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 004: WIRE |
| I.S. EN 3813:2013 | AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AL-4V) - ANNEALED - BAR AND WIRE FOR FORGED FASTENERS - D[E] <= 50 MM |
| I.S. EN 4500-001:2012 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 001: GENERAL RULES |
| UNI EN 3312 : 2013 | AEROSPACE SERIES - TITANIUM ALLOY TI-6AL-4V - ANNEALED - FORGINGS D[E] <= 150 MM |
| PREN 3350 : 200P2 | AEROSPACE SERIES - ALUMINIUM, ALUMINIUM ALLOYS - TEMPER DESIGNATIONS |
| PREN 2500/1 : 200P4 | AEROSPACE SERIES - INSTRUCTIONS FOR THE DRAFTING AND USE OF METALLIC MATERIAL STANDARDS - PART 1: GENERAL REQUIREMENTS |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.