EN 2133:2010
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Aerospace series - Cadmium plating of steels with specified tensile strength ≤ 1 450 MPa, copper, copper alloys and nickel alloys
Superseded date
04-30-2011
Published date
10-20-2010
Publisher
Foreword
1 Scope
2 Normative references
3 Purpose of process
4 Limitations of process use
5 Terms and definitions
6 Coating thickness
7 Symbols
8 Information for the processor
9 Condition of parts prior to the treatment
10 Process schedule
11 Post-treatment
12 Removal of the plating
13 Required characteristics
14 Test methods
15 Quality assurance
16 Designation
This European standard specifies the electrolytic cadmium plating of parts in steel of tensile strength Rm (max.) < or = 1 450 MPa, copper, copper alloys and nickel alloys, whose temperature in service does not exceed 235 °C.
| Committee |
ASD-STAN
|
| DevelopmentNote |
Supersedes UNE EN 2133. (03/2011)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| 09/30207944 DC : 0 | Identical |
| I.S. EN 2133:2010 | Identical |
| NBN EN 2133 : 2010 | Identical |
| UNI EN 2133 : 2011 | Identical |
| UNE-EN 2133:1998 | Identical |
| NF EN 2133 : 2012 | Identical |
| SNV DIN EN 2133 : 1998 | Identical |
| DIN EN 2133:2011-05 | Identical |
| NS EN 2133 : 2010 | Identical |
| BS EN 2133:2010 | Identical |
| PN EN 2133 : 2010 | Identical |
| NEN EN 2133 : 2010 | Identical |
| UNE-EN 2133:2010 | Identical |
| SN EN 2133 : 2011 | Identical |
| ONORM EN 2133 : 2011 | Identical |
| NBN EN 2753 : 1996 | Identical |
| NBN EN 2752 : 1993 | Identical |
| BS EN 3228:2010 | Aerospace series. Nuts, hexagonal, plain, reduced height, normal across flats, in steel, cadmium plated. Classification: 900 MPa (at ambient temperature)/235°C |
| 09/30204326 DC : 0 | BS EN 4351 - AEROSPACE SERIES - ROD ENDS, WITH SELF-ALIGNING DOUBLE ROW BALL BEARINGS AND THREADED SHANK IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS - INCH SERIES |
| I.S. EN 4084:2009 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, TWO LUG, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| BS EN 2811:2016 | Aerospace series. Nuts, hexagon, slotted/castellated in steel cadmium plated. Classification. 1 100 MPa/235 °C |
| BS EN 4613:2009 | Aerospace series. Spherical plain bearings in corrosion resisting steel with self-lubricating liner, narrow series. Dimensions and loads. Inch series |
| I.S. EN 4161:2009 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| NFL 22-576 : A | AIRCRAFT BOLTS AND NUTS - NUTS, ANCHOR, SELF-LOCKING, FLOATING, SINGLE LUG, WITH COUNTERBORE, ISO M OR ISO MJ THREADS, IN STEEL, CADMIUM PLATED, MOS2 LUBRICATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREE C |
| I.S. EN 3227:2010 | AEROSPACE SERIES - NUTS, HEXAGONAL, PLAIN, NORMAL HEIGHT, NORMAL ACROSS FLATS, IN STEEL, CADMIUM PLATED, LEFT HAND THREAD - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| BS EN 4156:2013 | Aerospace series. Rod ends, with self-aligning double row ball bearings and threaded shank in steel. Inner ring and balls in corrosion resisting steel. Dimensions and loads. Inch series |
| 16/30354034 DC : 0 | BS EN 4854-1 - AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, LOW STARTING TORQUE AND LOW FRICTION COEFFICIENT, ELEVATED DUTY CYCLES UNDER LOW OSCILLATIONS AT DIFFERENT OPERATING CONDITIONS, NARROW SERIES - DIMENSIONS AND LOADS |
| 16/30342255 DC : 0 | BS EN 8.3559 - AEROSPACE SERIES- SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, SPIRAL DRIVE RECESS, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| NF EN 4613 : 2009 | AEROSPACE SERIES - SPHERICAL PLAIN BEARINGS IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, NARROW SERIES - DIMENSIONS AND LOADS - INCH SERIES |
| 17/30369678 DC : 0 | PREN 7010 - AEROSPACE SERIES - USER GUIDE FOR CREATION AND DESIGNATION OF BOLTS |
| BS EN 4138:2016 | Aerospace series. Screws, pan head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification: 1 100 MPa (at ambient temperature) / 235 °C |
| BS ISO 9736:2000 | Eye-ends, in corrosion-resistant steel, threaded, for aircraft control wire rope. Dimensions and loads |
| NF EN 4538-003 : 2011 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER ELEVATED LOAD UNDER LOW OSCILLATIONS - NARROW SERIES - DIMENSIONS AND LOADS - PART 003: INCH SERIES WITH LOW FRICTION COEFFICIENT |
| NF EN 3653 : 2010 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, SELF-ALIGNING, ONE LUG, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| 08/30195533 DC : 0 | BS EN 2648 - AEROSPACE SERIES - WASHERS, CONCAVE, IN ALLOY STEEL, CADMIUM PLATED |
| PREN 2264 : 1995 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, TWO LUG, INCREMENTAL COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS2 LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES C |
| NFL 22-512 : 2001 | AIRCRAFT BOLTS AND NUTS - HEXAGONAL NUTS, SELF-LOCKING, WITH COUNTERBORE AND CAPTIVE WASHER, ISO M THREADS, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100MPA (AT AMBIENT TEMPERATURE/235 DEGREES C |
| PREN 2327 : 200P1 | AEROSPACE SERIES - WASHERS, LOCK, WITH RADIAL SERRATIONS IN ALLOY STEEL, CADMIUM PLATED FOR FLIGHT CONTROL RODS - DIMENSIONS |
| PREN 2811 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGON, SLOTTED/CASTELLATED IN STEEL CADMIUM PLATED - CLASSIFICATION: 1100 MPA/235 DEGREES C |
| PREN 3230 : 200P2 | AEROSPACE SERIES - NUTS, HEXAGON, SLOTTED/CASTELLATED, REDUCED HEIGHT, NORMAL ACROSS FLATS, IN STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 3228 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGON, PLAIN, REDUCED HEIGHT, NORMAL ACROSS FLATS, IN STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 3416 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, UNIVERSAL HEAD, IN NICKEL BASE ALLOY NI-P11, CADMIUM PLATED, METRIC SERIES |
| PREN 2680 : 200P3 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, SELF-ALIGNING, TWO LUG, IN ALLOY STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 2646 : 200P3 | AEROSPACE SERIES - NIPPLES, LUBRICATING, AXIAL TYPE, IN STEEL, CADMIUM PLATED |
| PREN 2856 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, CLOSED CORNER, REDUCED SERIES, WITH COUNTERBORE - CLASSIFICATION: 1100 MPA/235 DEGREES C |
| PREN 2647 : 1 | AEROSPACE SERIES - NUTS, HEXAGONAL, SELF-LOCKING, BALL SEAT, IN ALLOY STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES C |
| PREN 2754 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING TWO LUG, FLOATING WITH COUNTERBORE - CLASSIFICATION: 1100 MPA/235 DEGREES C |
| PREN 2913 : 1997 | AEROSPACE SERIES - WASHERS, FLAT, LARGE DIAMETER IN ALLOY STEEL, CADMIUM PLATED |
| PREN 2492 : 1 | AEROSPACE SERIES - ROD-ENDS SELF-ALIGNING BALL BEARING WITH THREADED SHANK - DIMENSIONS AND LOADS |
| PREN 4139 : 200P2 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| PREN 3713 : 200P1 | AEROSPACE SERIES - NUTS, SELF-LOCKING, BIHEXAGONAL, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 4309 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGON, SELF-LOCKING BY PLASTIC RING, NORMAL HEIGHT, NORMAL ACROSS FLATS, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/120 DEGREES C |
| PREN 4854-2 : 200P1 | AEROSPACE SERIES - BEARING, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, LOW STARTING TORQUE AND LOW FRICTION COEFFICIENT, ELEVATED DUTY CYCLES UNDER LOW OSCILLATIONS AT DIFFERENT OPERATING CONDITIONS - PART 2: DIMENSIONS AND LOADS FOR WIDE SERIES |
| PREN 6057 : 200P1 | AEROSPACE SERIES - ROD-ENDS, WITH BEARING PER EN4265 IN CORROSION RESISTING STEEL, INTERNAL THREADED SHANK - DIMENSIONS AND LOADS - INCH SERIES |
| PREN 4138 : 200P2 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 3626 : 200P2 | AEROSPACE SERIES - NUTS, HEXAGON, SELF-LOCKING, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 4084 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, TWO LUG, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| PREN 4269 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, TWO LUG, REDUCED SERIES, WITH COUNTERBORE, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 4080 : 200P3 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| PREN 4162 : 200P2 | AEROSPACE SERIES - SCREWS 100 DEGREES COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| I.S. EN 4132:2009 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| NF EN 2862 : 2010 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, 90 DEGREES CORNER, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| NFL 22-440 : A | AIRCRAFT BOLTS AND NUTS - NUTS, HEXAGONAL, PLAIN, REDUCED HEIGHT, NORMAL ACROSS FLATS, WITH LOCKING HOLES, LEFT-HAND ISO M OR ISO MJ THREADS, 4H TOLERANCE CLASS |
| NF EN 3226 : 2010 | AEROSPACE SERIES - NUTS, HEXAGON, PLAIN, NORMAL HEIGHT, NORMAL ACROSS FLATS, STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA/235 DEGREES C |
| NFL 22-436 : A | AIRCRAFT BOLTS AND NUTS - NUTS, HEXAGONAL, PLAIN, REDUCED HEIGHT, NORMAL ACROSS FLATS, LEFT-HAND ISO M OR ISO MJ THREADS, 4H5H OR 5H TOLERANCE CLASS ACCORDING TO DIAMETER |
| DIN EN 2885:1996-03 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED, CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| BS EN 2138:2000 | Washers, flat, in steel, cadmium plated |
| BS EN 2328:2006 | Aerospace series. Washers, tab in corrosion resisting steel, cadmium plated for flight control rods. Dimensions |
| BS EN 2913:2000 | Washers, flat, large diameter, in steel, cadmium plated |
| BS EN 2649:1995 | Screws, pan head, slotted, threaded to head, in alloy steel, cadmium plated. Classification. 900 MPa (at ambient temperature)/235°C |
| BS EN 2889:2006 | Aerospace series. Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 900 MPa (at ambient temperature) / 235°C |
| BS EN 2754:2006 | Aerospace series. Nuts, anchor, self locking, two lug, floating with counterbore. Classification: 1100 MPa/235°C |
| BS EN 2652:1997 | Screws, 100° countersunk normal head, slotted, threaded to head, in alloy steel, cadmium plated. Classification: 900 MPa (at ambient temperature)/235°C |
| NF EN 2885 : 1996 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| NF EN 2886 : 1996 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| NFL 22-437 : C | AIRCRAFT BOLTS AND NUTS - NUTS, HEXAGONAL, PLAIN, REDUCED HEIGHT NORMAL ACROSS FLATS, WITH LOCKING HOLES, ISO M OR ISO MJ THREADS, 4H5H OR 5H TOLERANCE CLASS ACCORDING TO DIAMETER |
| 06/30151546 DC : 0 | BS EN 4613 - AEROSPACE SERIES - SPHERICAL PLAIN BEARINGS IN CORROSION RESISTING STEEL WITH SELF LUBRICATING LINER, NARROW SERIES - DIMENSIONS AND LOADS. INCH SERIES |
| BS EN 4129:2009 | Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature) / 235°C |
| UNI EN 3753 : 2011 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, 60 DEGREES CORNER, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| BS EN 4309:2016 | Aerospace series. Nuts, hexagon, self-locking by plastic ring, normal height, normal across flats, in alloy steel, cadmium plated. Classification: 900 MPa (at ambient temperature) / 120 °C |
| I.S. EN 2866:2009 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, ONE LUG, WITH COUNTERBORE, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1110 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| NFL 22-573 : 2000 | AIRCRAFT BOLTS AND NUTS - NUTS, ANCHOR, SELF-LOCKING, 90 DEGREE CORNER, REDUCED SERIES, WITH COUNTERBORE, ISO M OR ISO MJ THREADS, IN STEEL, CADMIUM PLATED, MOS2 LUBRICATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREE C |
| DIN EN 4080:1996-03 (Draft) | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| UNI EN 4539-003 : 2011 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER ELEVATED LOAD UNDER LOW OSCILLATIONS - WIDE SERIES - DIMENSIONS AND LOADS - PART 003: INCH SERIES WITH LOW FRICTION COEFFICIENT |
| 16/30342246 DC : 0 | BS EN 8.3555 - AEROSPACE SERIES - SCREWS, PAN HEAD, SPIRAL DRIVE RECESS, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| 09/30206914 DC : 0 | BS EN 2596 - AEROSPACE SERIES - WASHERS, LOCK, WITH RADIAL SERRATIONS IN CORROSION RESISTING STEEL, CADMIUM PLATED FOR FLIGHT CONTROL RODS - DIMENSIONS |
| BS EN 4163:2016 | Aerospace series. Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification: 1 100 MPa (at ambient temperature) / 235 °C |
| 17/30361847 DC : 0 | BS EN 4161 - AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| BS EN 4084:2009 | Aerospace series. Nuts, anchor, self-locking, fixed, two lug, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature) / 235°C |
| 16/30342254 DC : 0 | BS EN 8.3558 - AEROSPACE SERIES- SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, SPIRAL DRIVE RECESS, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| I.S. EN 4538-003:2010 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER ELEVATED LOAD UNDER LOW OSCILLATIONS - NARROW SERIES - DIMENSIONS AND LOADS - PART 003: INCH SERIES WITH LOW FRICTION COEFFICIENT |
| NF EN 3229 : 2010 | AEROSPACE SERIES - NUTS, HEXAGONAL, PLAIN, REDUCED HEIGHT, NORMAL ACROSS FLATS, IN STEEL, CADMIUM PLATED, LEFT HAND THREAD - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| NFL 22-439 : B | AIRCRAFT BOLTS AND NUTS - NUTS, HEXAGONAL, PLAIN, REDUCED HEIGHT, NORMAL ACROSS FLATS, WITH LOCKING HOLES, ISO M OR ISO MJ THREADS, 4H TOLERANCE CLASS |
| BS EN 3712:2007 | Aerospace series. Nuts, anchor, self-locking, one lug, fixed, reduced series, with counterbore, in steel, cadmium plated, MoS2, lubricated. Classification: 1100 MPa (at ambient temperature)/235 °C |
| PREN 2414 : 200P1 | AEROSPACE SERIES - WASHERS, CHAMFERED, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED |
| PREN 3303 : 1995 | BOLTS, CAP HEAD, HEXAGON SOCKET, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPa (AT AMBIENT TEMPERATURE)/235 DEG C |
| PREN 4614 : 200P1 | AEROSPACE SERIES - SPHERICAL PLAIN BEARINGS IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, WIDE SERIES - DIMENSIONS AND LOADS - INCH SERIES |
| PREN 3227 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGON, PLAIN, NORMAL HEIGHT, NORMAL ACROSS FLATS, IN STEEL, CADMIUM PLATED, LEFT HAND THREAD - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 6096 : DRAFT 2018 | AEROSPACE SERIES - BEARING, SPHERICAL PLAIN WITH SELF-LUBRICATING LINER, EXTRA WIDE INNER RING IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS - INCH SERIES |
| PREN 2880 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FUEL RESISTANT, SEALING, FLOATING, TWO LUG, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/120 DEGREES C |
| NFL 22-574 : A | AIRCRAFT BOLTS AND NUTS - NUTS, ANCHOR, SELF-LOCKING, CLOSED CORNER, REDUCED SERIES, WITH COUNTERBORE, ISO M OR ISO MJ THREADS, IN STEEL, CADMIUM PLATED, MOS2 LUBRICATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE) /235 DEGREE C |
| NFL 22-438 : A | AIRCRAFT BOLTS AND NUTS - NUTS, HEXAGONAL, PLAIN, REDUCED HEIGHT, NORMAL ACROSS FLATS, WITH LOCKING HOLES, LEFT-HAND ISO M OR ISO MJ THREADS, 4H5H OR 5H TOLERANCE CLASS ACCORDING TO DIAMETER |
| PREN 3753 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, 60 DEGREES CORNER, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 4539-3 : 200P1 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF LUBRICATING LINER - ELEVATED LOAD UNDER LOW OSCILLATIONS - WIDE SERIES - DIMENSIONS AND LOADS - PART 003: INCH SERIES WITH LOW FRICTION COEFFICIENT |
| I.S. EN 4266:2013 | AEROSPACE SERIES - BEARING SPHERICAL PLAIN, METAL TO METAL, IN CORROSION RESISTING STEEL, CADMIUM PLATED - WIDE SERIES - DIMENSIONS AND LOADS - INCH SERIES |
| ISO 9757:2000 | Aerospace — Fork-ends, in steel, threaded, for aircraft control wire rope turnbarrels — Dimensions and loads |
| NFL 21-273 : A | FASTENERS - LOCKBOLTS, PROTRUDING HEAD, WITH CLOSE TOLERANCE AND TITANIUM T-A6V SHANK AND WITH COLLAR IN STEEL XC 10 |
| DIN EN 2138:2000-02 | AEROSPACE SERIES - WASHERS, FLAT, IN STEEL, CADMIUM PLATED |
| DIN EN 2897:1996-09 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| DIN EN 2886:1996-09 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA/235 DEGREE C |
| BS EN 2886:1996 | Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification. 900 MPa (at ambient temperature)/235°C |
| BS EN 3303:1997 | Screws, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature)/235°C |
| I.S. EN 2648:2013 | AEROSPACE SERIES - WASHERS, CONCAVE, IN ALLOY STEEL, CADMIUM PLATED |
| I.S. EN 2889:2006 | AEROSPACE SERIES - METRIC BOLTS, NORMAL HEXAGON HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| I.S. EN 2647:2006 | AEROSPACE SERIES - NUTS, HEXAGONAL, SELF-LOCKING, BALL SEAT, IN ALLOY STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| I.S. EN 2859:2006 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED, METRIC SERIES - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| I.S. EN 2491:2011 | AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY LUBRICANTS - COATING METHODS |
| BS EN 4073:2016 | Aerospace series. Screws, pan head, hexalobular recess, coarse tolerance shank, medium length thread, in alloy steel, cadmium plated. Classification: 1 100 MPa (at ambient temperature) / 235 °C |
| 15/30331399 DC : 0 | BS EN 6096 - AEROSPACE SERIES - BEARINGS SPHERICAL PLAIN WITH SELF-LUBRICATING LINER EXTRA WIDE INNER RING IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS - INCH SERIES |
| BS EN 3227:2010 | Aerospace series. Nuts, hexagonal, plain, normal height, normal across flats, in steel, cadmium plated, left hand thread. Classification: 1100 MPa (at ambient temperature)/235°C |
| BS EN 3226:2009 | Aerospace series. Nuts, hexagon, plain, normal height, normal across flats, steel, cadmium plated. Classification: 1100 MPa/235°C |
| BS EN 4136:2009 | Aerospace series. Bolts, normal bi-hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification: 1100 MPa at ambient temperature)/235°C |
| BS EN 4266:2013 | Aerospace series. Bearing spherical plain, metal to metal, in corrosion resisting steel, cadmium plated. Wide series. Dimensions and loads. Inch series |
| NFL 22-569 : A | AIRCRAFT BOLTS AND NUTS - NUTS, ANCHOR, SELF-LOCKING, 90 DEGREES CORNER, WITH COUNTERBORE, ISO M OR ISO MJ THREADS, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| 13/30288694 DC : 0 | BS EN 4073 - AEROSPACE SERIES - SCREWS, PAN HEAD, SIX LOBE RECESS, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| NFL 22-570 : A | AIRCRAFT BOLTS AND NUTS - NUTS, ANCHOR, SELF-LOCKING, 60 DEGREE CORNER, WITH COUNTERBORE, ISO M OR ISO MJ THREADS, IN STEEL, CADMIUM PLATED, MOS2 LUBRICATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREE C |
| NF EN 3228 : 2010 | AEROSPACE SERIES - NUTS, HEXAGONAL, PLAIN, REDUCED HEIGHT, NORMAL ACROSS FLATS, IN STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| NFL 22-577 : A | AIRCRAFT BOLTS AND NUTS - NUTS, ANCHOR, SELF-LOCKING, FLOATING, TWO LUG, REDUCED SERIES, WITH COUNTERBORE, ISO M OR ISO MJ THREADS, IN STEEL, CADMIUM PLATED, MOS2 LUBRICATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREE C |
| I.S. EN 4539-003:2010 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER ELEVATED LOAD UNDER LOW OSCILLATIONS - WIDE SERIES - DIMENSIONS AND LOADS - PART 003: INCH SERIES WITH LOW FRICTION COEFFICIENT |
| DIN EN 3434:1999-01 (Draft) | AEROSPACE SERIES - NUTS, HEXAGON, SLOTTED/CASTELLATED, SELF-LOCKING, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| NFL 22-572 : A | AIRCRAFT BOLTS AND NUTS - NUTS, ANCHOR, SELF-LOCKING, SINGLE LUG, REDUCED SERIES, WITH COUNTERBORE, ISO M OR ISO MJ THREADS, IN STEEL, CADMIUM PLATED, MOS2 LUBRICATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREE C |
| NF EN 3227 : 2010 | AEROSPACE SERIES - NUTS, HEXAGONAL, PLAIN, NORMAL HEIGHT, NORMAL ACROSS FLATS, IN STEEL, CADMIUM PLATED, LEFT HAND THREAD - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 4156 : 200P2 | AEROSPACE SERIES - ROD ENDS, WITH SELF-ALIGNING DOUBLE ROW BALL BEARINGS AND THREADED SHANK IN STEEL - INNER RING AND BALLS IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS INCH SERIES |
| PREN 4163 : 200P2 | AEROSPACE SERIES - SCREWS 100 DEGREES COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 2648 : 200P2 | AEROSPACE SERIES - WASHERS, CONCAVE, IN ALLOY STEEL, CADMIUM PLATED |
| PREN 3229 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGON, PLAIN, REDUCED HEIGHT, NORMAL ACROSS FLATS, IN STEEL, CADMIUM PLATED, LEFT HAND THREAD - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 3418 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREE NORMAL COUNTERSUNK HEAD, IN NICKEL BASE ALLOY NI-P11, CADMIUM PLATED - METRIC SERIES |
| PREN 3624 : 200P1 | AEROSPACE SERIES - POLYSULPHIDE SEALANTS, TWO-COMPONENT - TECHNICAL SPECIFICATION |
| PREN 3653 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, SELF-ALIGNING, ONE LUG, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| I.S. EN 4309:2016 | AEROSPACE SERIES - NUTS, HEXAGON, SELF-LOCKING BY PLASTIC RING, NORMAL HEIGHT, NORMAL ACROSS FLATS, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/120 DEGREE C |
| I.S. EN 3182:2012 | AEROSPACE SERIES - BALL BEARINGS, RIGID IN CORROSION RESISTING STEEL CADMIUM PLATED, FOR CONTROL CABLE PULLEYS - DIMENSIONS AND LOADS |
| UNI EN 4538-003 : 2011 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER ELEVATED LOAD UNDER LOW OSCILLATIONS - NARROW SERIES - DIMENSIONS AND LOADS - PART 003: INCH SERIES WITH LOW FRICTION COEFFICIENT |
| NF EN 4132 : 2010 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| BS EN 4161:2009 | Aerospace series. Screws, pan head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature) / 235 °C |
| UNI EN 3227 : 2011 | AEROSPACE SERIES - NUTS, HEXAGONAL, PLAIN, NORMAL HEIGHT, NORMAL ACROSS FLATS, IN STEEL, CADMIUM PLATED, LEFT HAND THREAD - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| I.S. EN 4614:2009 | AEROSPACE SERIES - SPHERICAL PLAIN BEARINGS IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, WIDE SERIES - DIMENSIONS AND LOADS - INCH SERIES |
| NF EN 3712 : 2008 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, ONE LUG, FIXED, REDUCED SERIES, WITH COUNTERBORE, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| DIN EN 3035:1996-11 | AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| DIN EN 3054:1994-06 | AEROSPACE SERIES - BEARINGS - AIRFRAME ROLLING - SINGLE ROW SELF-ALIGNING ROLLER BEARINGS IN STEEL, CADMIUM PLATED - DIMENSIONS AND LOADS |
| BS EN 3112:1995 | Bolts, normal hexagonal head, threaded to head, in alloy steel, cadmium plated. Classification: 900 MPa (at ambient temperature)/235°C |
| EN 2752:1989 | Aerospace series - Nuts, anchor, self locking fixed, two lug, reduced series, with counterbore - Classification : 1100 MPa/235 degree C |
| EN 2889:2006 | Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C |
| EN 2680:2006 | Aerospace series - Nuts, anchor, self-locking, floating, self-aligning, two lug, in alloy steel, cadmium plated, MoS2 lubricated, metric series - Classification: 900 MPa (at ambient temperature) / 235 °C |
| UNI EN 2491 : 2012 | AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY LUBRICANTS - COATING METHODS |
| UNI EN 4156 : 2014 | AEROSPACE SERIES - ROD ENDS, WITH SELF-ALIGNING DOUBLE ROW BALL BEARINGS AND THREADED SHANK IN STEEL - INNER RING AND BALLS IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS - INCH SERIES |
| EN 3303:1997 | Aerospace series - Screw, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature)/235°C |
| UNI EN 4266 : 2013 | AEROSPACE SERIES - BEARING SPHERICAL PLAIN, METAL TO METAL, IN CORROSION RESISTING STEEL, CADMIUM PLATED - WIDE SERIES - DIMENSIONS AND LOADS - INCH SERIES |
| UNI EN 2648 : 2014 | AEROSPACE SERIES - WASHERS, CONCAVE, IN ALLOY STEEL, CADMIUM PLATED |
| I.S. EN 4613:2009 | AEROSPACE SERIES - SPHERICAL PLAIN BEARINGS IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, NARROW SERIES - DIMENSIONS AND LOADS - INCH SERIES |
| I.S. EN 3228:2010 | AEROSPACE SERIES - NUTS, HEXAGONAL, PLAIN, REDUCED HEIGHT, NORMAL ACROSS FLATS, IN STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| NF EN 4539-003 : 2011 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER ELEVATED LOAD UNDER LOW OSCILLATIONS - WIDE SERIES - DIMENSIONS AND LOADS - PART 003: INCH SERIES WITH LOW FRICTION COEFFICIENT |
| BS EN 3753:2010 | Aerospace series. Nuts, anchor, self-locking, fixed, 60° corner, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/235°C |
| BS EN 3229:2009 | Aerospace series. Nuts, hexagonal, plain, reduced height, normal across flats, in steel, cadmium plated, left hand thread. Classification: 900 MPa (at ambient temperature)/235°C |
| NF EN 4084 : 2010 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, TWO LUG, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| ISO 9738:2000 | Aerospace — Turnbarrels, for aircraft control wire rope — Dimensions and loads |
| NFL 22-519 : A | AIRCRAFT BOLTS AND NUTS - BIHEXAGONAL NUTS, SELF-LOCKING, ISO M OR ISO MJ THREADS, IN STEEL, CADMIUM PLATED, MOS2 LUBRICATED - CLASSIFICATION: 1 550 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREE C |
| BS EN 4538-003:2010 | Aerospace series. Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations. Narrow series. Dimensions and loads Inch series with low friction coefficient |
| BS EN 3182:2012 | Aerospace series. Ball bearings, rigid in corrosion resisting steel cadmium plated, for control cable pulleys. Dimensions and loads |
| BS EN 2862:2009 | Aerospace series. Nuts, anchor, self-locking, fixed, 90° corner, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/235°C |
| ISO 9217:2002 | Aerospace — Washers, chamfered, with counterbore, for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated — Dimensions and masses |
| 16/30354035 DC : 0 | BS EN 4854-2 - AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, LOW STARTING TORQUE AND LOW FRICTION COEFFICIENT, ELEVATED DUTY CYCLES UNDER LOW OSCILLATIONS AT DIFFERENT OPERATING CONDITIONS, WIDE SERIES - DIMENSIONS AND LOADS |
| I.S. EN 3712:2007 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, ONE LUG, FIXED, REDUCED SERIES, WITH COUNTERBORE, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| BS ISO 9758:2000 | Fork-ends, in corrosion-resistant steel, threaded, for rolling bearings, for aircraft control wire rope. Dimensions and loads |
| BS ISO 9738:2000 | Turnbarrels, for aircraft control wire rope. Dimensions and loads |
| I.S. EN 3229:2009 | AEROSPACE SERIES - NUTS, HEXAGONAL, PLAIN, REDUCED HEIGHT, NORMAL ACROSS FLATS, IN STEEL, CADMIUM PLATED, LEFT HAND THREAD - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| I.S. EN 4073:2016 | AEROSPACE SERIES - SCREWS, PAN HEAD, HEXALOBULAR RECESS, COARSE TOLERANCE SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| NF EN 2866 : 2010 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, ONE LUG, WITH COUNTERBORE, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1110 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| NFL 22-431 : 2000 | AIRCRAFT BOLTS AND NUTS - NUTS, HEXAGONAL, PLAIN, NORMAL HEIGHT, NORMAL ACROSS FLATS, ISO M OR ISO MJ THREADS, 2, 4H5H OR 5H TOLERANCE CLASS ACCORDING TO DIAMETER |
| PREN 3143 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREES COUNTERSUNK NORMAL HEAD, IN NICKEL BASE ALLOY NI-P11, CADMIUM PLATED, INCH BASED SERIES |
| PREN 3182 : 200P1 | AEROSPACE SERIES - BALL BEARINGS, RIGID IN CORROSION RESISTING STEEL CADMIUM PLATED, FOR CONTROL CABLE PULLEYS - DIMENSIONS AND LOADS |
| NFL 22-541 : C2001 | AIRCRAFT BOLTS AND NUTS - HEXAGONAL NUTS, SELF-LOCKING, ISO M AND ISO MJ THREADS, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURES)/235 DEGREES C OR IN HEAT RESISTING STEEL, SILVER PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| NF EN 4614 : 2009 | AEROSPACE SERIES - SPHERICAL PLAIN BEARINGS IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, WIDE SERIES - DIMENSIONS AND LOADS - INCH SERIES |
| PREN 2328 : 200P1 | AEROSPACE SERIES - WASHERS, TAB IN CORROSION RESISTING STEEL CADMIUM PLATED FOR FLIGHT CONTROL RODS - DIMENSIONS |
| PREN 2138 : 1997 | AEROSPACE SERIES - WASHERS, FLAT, IN STEEL, CADMIUM PLATED |
| NFL 22-525 : 2001 | AIRCRAFT BOLTS AND NUTS - BIHEXAGONAL NUTS, SELF-LOCKING, ISO M THREADS, FINE PITCH THREADS IN STEEL, CADMIUM PLATED, MOS2 LUBRICATED - CLASSIFICATION: 1 550 MPA (AT AMBIENT TEMPERATURE)/260 DEGREES C |
| PREN 6097 : DRAFT 2018 | AEROSPACE SERIES - BEARING, SPHERICAL PLAIN, METAL TO METAL, EXTRA WIDE INNER RING IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS - INCH SERIES |
| NF EN 4136 : 2010 | AEROSPACE SERIES - BOLTS, NORMAL BI-HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 2889 : 1 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 3712 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, ONE LUG, FIXED, REDUCED SERIES, WITH COUNTERBORE, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| TR 4661 : 2009 | AEROSPACE SERIES - HINGES, FLIGHT CONTROLS MATERIALS AND SURFACE TREATMENTS |
| ASD-STAN prEN 4157 P1:1996 | AEROSPACE SERIES - ROD ENDS, WITH SELF-ALIGNING DOUBLE ROW BALL BEARINGS AND THREADED SHANK IN STEEL - DIMENSIONS AND LOADS - INCH SERIES |
| PREN 4073 : 200P2 | AEROSPACE SERIES - SCREWS, PAN HEAD, SIX LOBE RECESS, COARSE TOLERANCE SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 4129 : 200P1 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| ISO 9758:2000 | Aerospace — Fork-ends, in steel, threaded, for rolling bearings, for aircraft control wire rope — Dimensions and loads |
| I.S. EN 4156:2013 | AEROSPACE SERIES - ROD ENDS, WITH SELFALIGNING DOUBLE ROW BALL BEARINGS AND THREADED SHANK IN STEEL - INNER RING AND BALLS IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS - INCH SERIES |
| ISO 9216:2002 | Aerospace — Nuts, hexagonal, slotted (castellated), for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated — Dimensions and masses |
| I.S. EN 3753:2010 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, 60 DEGREES CORNER, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| ISO 9218:2002 | Aerospace — Washers, flat, for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated — Dimensions and masses |
| I.S. EN 4136:2009 | AEROSPACE SERIES - BOLTS, NORMAL BI-HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| I.S. EN 3226:2009 | NUTS, HEXAGON, PLAIN, NORMAL HEIGHT, NORMAL ACROSS FLATS, STEEL, CADMIUM PLATED - CLASSIFICATION 1100 MPA/235 DEGREES C |
| I.S. EN 4138:2016 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| EN 4136:2009/AC:2010 | AEROSPACE SERIES - BOLTS, NORMAL BI-HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| EN 4161:2009/AC:2010 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| EN 4129:2009/AC:2010 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| BS EN 3291:1994 | Bearings, airframe rolling. Single row self-aligning roller bearings in steel, cadmium plated. Diameter series 3 and 4. Dimensions and loads |
| BS EN 3288:1994 | Bearings, airframe rolling. Double row self-aligning ball bearings in steel, cadmium plated. Diameter series 2. Dimensions and loads |
| BS EN 2885:1996 | Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 900 MPa (at ambient temperature)/235°C |
| BS EN 2647:2006 | Aerospace series. Nuts, hexagonal, self-locking, ball seat, in alloy steel, cadmium plated, MoS<sub>2</sub> lubricated. Classification: 900 MPa (at ambient temperature) / 235°C |
| BS EN 2491:2011 | Aerospace series. Molybdenum disulphide dry lubricants. Coating methods |
| BS EN 2680:2006 | Aerospace series. Nuts, anchor, self-locking, floating, self-aligning, two lug, in alloy steel, cadmium plated, MoS<sub>2</sub> lubricated. Classification: 900 MPa (at ambient temperature) / 235°C |
| BS EN 2897:1996 | Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature) /235°C |
| BS EN 2752:1990 | Specification for nuts, anchor, self locking fixed, two lug, reduced series, with counterbore. Classification: 1100 MPa/235°C |
| BS EN 2856:2006 | Aerospace series. Nuts, anchor, self-locking, fixed, closed corner, reduced series, with counterbore. Classification: 1100 MPa/235°C |
| BS EN 3054:1994 | Bearings, airframe rolling. Single row self-aligning roller bearings in steel, cadmium plated. Dimensions and loads |
| BS EN 3059:2007 | Aerospace series. Bearings, airframe rolling. Rigid single row ball bearings in steel with flanged alignment housing, cadmium plated. Dimensions and loads |
| BS EN 3230:2001 | Aerospace series. Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in steel, cadmium plated. Classificaiton: 900 MPa (at ambient temperature)/235°C |
| BS EN 2596:2006 | Aerospace series. Washers, lock, with radial serrations in corrosion resisting steel, cadmium plated for flight control rods. Dimensions |
| BS EN 3035:1997 | Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature)/235°C |
| EN 4538-003:2010 | Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations - Narrow series - Dimensions and loads - Part 003: Inch series with low friction coefficient |
| EN 2648:2013 | Aerospace series - Washers, concave, in alloy steel, cadmium plated |
| EN 3712 : 2007 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, ONE LUG, FIXED, REDUCED SERIES, WITH COUNTERBORE, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| EN 2754 : 2006 | AEROSPACE SERIES - NUTS, ANCHOR, SELF LOCKING, TWO LUG, FLOATING WITH COUNTERBORE - CLASSIFICATION: 1100 MPA/235 DEGREE C |
| EN 3112:1995 | Aerospace series - Bolts, normal hexagonal head, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature) / 235 °C |
| EN 2790:1991 | Aerospace series - Rod ends, adjustable, self-aligning plain bearing with self-lubricating liner and threaded shank with engagement: 1,5 x thread diameter - Dimensions and loads |
| EN 3626 : 2006 | Aerospace series - Nuts, hexagon, self-locking in steel, cadmium plated, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/235 °C |
| EN 2647:2006 | Aerospace series - Nuts, hexagonal, self-locking, ball seat, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature)/235 °C |
| EN 4073:2016 | Aerospace series - Screws, pan head, hexalobular recess, coarse tolerance shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 °C |
| EN 4156:2013 | Aerospace series - Rod ends, with self-aligning double row ball bearings and threaded shank in steel - Inner ring and balls in corrosion resisting steel - Dimensions and loads - Inch series |
| EN 2264 : 1996 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, TWO LUG, INCREMENTAL COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS2 LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| EN 4132:2009 | Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 °C |
| EN 2596:2006 | Aerospace series - Washers, lock, with radial serrations in corrosion resisting steel, cadmium plated for flight control rods - Dimensions |
| EN 2328:2006 | Aerospace series - Washers, tab in corrosion resisting steel, cadmium plated for flight control rods - Dimensions |
| EN 3059:2007 | Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel with flanged alignment housing, cadmium plated - Dimensions and loads |
| EN 3228:2010 | Aerospace series - Nuts, hexagonal, plain, reduced height, normal across flats, in steel, cadmium plated - Classification: 900 MPa (at ambient temperature) / 235 °C |
| EN 4539-003:2010 | Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations - Wide series - Dimensions and loads - Part 003: Inch series with low friction coefficient |
| EN 3229 : 2009 | AEROSPACE SERIES - NUTS, HEXAGONAL, PLAIN, REDUCED HEIGHT, NORMAL ACROSS FLATS, IN STEEL, CADMIUM PLATED, LEFT HAND THREAD - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| EN 2862 : 2009 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, 90 DEGREE CORNER, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| EN 4084:2009 | Aerospace series - Nuts, anchor, self-locking, fixed, two lug, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 1 100 MPA (at ambient temperature) / 235 °C |
| EN 4309:2016 | Aerospace series - Nuts, hexagon, self-locking by plastic ring, normal height, normal across flats, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature) / 120 °C |
| EN 2652 : 1997 | AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, SLOTTED, THREADED TO HEAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| EN 2866 : 2009 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, ONE LUG, WITH COUNTERBORE, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1110 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| EN 3305 : 1996 | AEROSPACE SERIES - SCREWS, 100 DEGREE COUNTERSUNK REDUCED HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| EN 2753 : 1996 | Aerospace series - Nuts, anchor, self-locking, fixed, single lug, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/235 °C |
| EN 2792:1991 | Aerospace series - Rod ends, adjustable, double fork and threaded shank with engagement: 1,5 x thread diameter - Dimensions and loads |
| EN 2913:1999 | Aerospace series - Washers, flat, large diameter, in steel, cadmium plated |
| EN 3035:1996 | Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature)/235 °C |
| EN 4163:2016 | Aerospace series - Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 °C |
| EN 4266:2013 | Aerospace series - Bearing spherical plain, metal to metal, in corrosion resisting steel, cadmium plated - Wide series - Dimensions and loads - Inch series |
| EN 2859:2006 | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated, metric series - Classification: 1 100 MPa (at ambient temperature) / 235 °C |
| EN 2882:2006 | Aerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in steel, cadmium plated, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 235 °C |
| EN 3753 : 2010 | Aerospace series - Nuts, anchor, self-locking, fixed, 60° corner, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 235 °C |
| EN 3227:2010 | Aerospace series - Nuts, hexagonal, plain, normal height, normal across flats, in steel, cadmium plated, left hand thread - Classification: 1 100 MPa (at ambient temperature) / 235 °C |
| EN 2413 : 1995 | AEROSPACE SERIES - BOLTS, SHOULDERED, THIN HEXAGONAL HEAD, CLOSE TOLERANCE SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPa (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| EN 3060:2007 | Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated, with flanged alignment housing, cadmium plated - Dimensions and loads |
| EN 2649 : 1995 | AEROSPACE SERIES - SCREWS, PAN HEAD, SLOTTED, THREADED TO HEAD, IN ALLOY STEEL, CADMIUM PLATED CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| EN 3182 : 2012 | AEROSPACE SERIES - BALL BEARINGS, RIGID IN CORROSION RESISTING STEEL CADMIUM PLATED, FOR CONTROL CABLE PULLEYS - DIMENSIONS AND LOADS |
| EN 2491:2011 | Aerospace series - Molybdenum disulphide dry lubricants - Coating methods |
| EN 2327:2006 | Aerospace series - Washers, lock, with radial serrations in alloy steel, cadmium plated for flight control rods - Dimensions |
| EN 3653:2010 | Aerospace series - Nuts, anchor, self-locking, floating, self-aligning, one lug, in steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature) / 235 °C |
| EN 2811 : 2016 | AEROSPACE SERIES - NUTS, HEXAGON, SLOTTED/CASTELLATED IN STEEL CADMIUM PLATED - CLASSIFICATION: 1100 MPA/235 DEGREE C |
| EN 4138:2016 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| EN 3230 : 2001 | AEROSPACE SERIES - NUTS, HEXAGON, SLOTTED/CASTELLATED, REDUCED HEIGHT, NORMAL ACROSS FLATS, IN STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| EN 2138:1999 | Aerospace series - Washers, flat, in steel, cadmium plated |
| EN 2856 : 2006 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, CLOSED CORNER, REDUCED SERIES, WITH COUNTERBORE - CLASSIFICATION: 1100 MPA/235 DEGREES C |
| EN 2791:1991 | Aerospace series - Rod ends, adjustable, single fork and threaded shank with engagement: 1,5 x thread diameter - Dimensions and loads |
| EN 3226 : 2009 | Nuts, hexagon, plain, normal height, normal across flats, steel, cadmium plated - Classification 1 100 MPa/235 °C |
| 06/30151549 DC : 0 | BS EN 4614 - AEROSPACE SERIES - SPHERICAL PLAIN BEARINGS IN CORROSION RESISTING STEEL WITH SELF LUBRICATING LINER, WIDE SERIES - DIMENSIONS AND LOADS - INCH SERIES |
| 13/30288693 DC : 0 | BS EN 4138 - AEROSPACE SERIES- SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| BS ISO 9757:2000 | Fork-ends, in corrosion-resistant steel, threaded, for aircraft control wire rope turnbarrels. Dimensions and loads |
| BS EN 4132:2009 | Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature)/235°C |
| 13/30290264 DC : 0 | BS EN 4163 - AEROSPACE SERIES - SCREWS 100 DEGREES COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| BS EN 2866:2009 | Aerospace series. Nuts, anchor, self-locking, floating, one lug, with counterbore, in steel, cadmium plated, MoS2 lubricated. Classification: 1110 MPa (at ambient temperature)/235°C |
| BS EN 4539-003:2010 | Aerospace series. Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations. Wide series. Dimensions and loads Inch series with low friction coefficient |
| NFL 22-462 : A | AIRCRAFT BOLTS AND NUTS - NUTS, HEXAGONAL, PLAIN, REDUCED HEIGHT, NORMAL ACROSS FLATS, WITH LOCKING HOLES, LEFT-HAND ISO M OR ISO MJ THREADS, FINE PITCH THREADS, 4H5H TOLERANCE CLASS |
| NFL 22-568 : A | AIRCRAFT BOLTS AND NUTS - NUTS, ANCHOR, SELF-LOCKING, SINGLE LUG, WITH COUNTERBORE, ISO M OR ISO MJ THREADS, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| BS EN 4614:2009 | Aerospace series. Spherical plain bearings in corrosion resisting steel with self-lubricating liner, wide series. Dimensions and loads. Inch series |
| NFL 22-567 : 2001 | AIRCRAFT BOLTS AND NUTS - NUTS, ANCHOR, SELF-LOCKING, TWO LUG, WITH COUNTERBORE, ISO M THREADS IN STEEL, CADMIUM PLATED MOS2 LUBRICATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| ISO 9736:2000 | Aerospace — Eye-ends, in steel, threaded, for aircraft control wire rope — Dimensions and loads |
| PREN 3060 : 200P2 | AEROSPACE SERIES - BEARINGS, AIRFRAME ROLLING - RIGID SINGLE ROW BALL BEARINGS IN STEEL, CADMIUM PLATED, WITH FLANGED ALIGNMENT HOUSING, CADMIUM PLATED - DIMENSIONS AND LOADS |
| NFL 22-461 : C | AIRCRAFT BOLTS AND NUTS - NUTS, HEXAGONAL, PLAIN, REDUCED HEIGHT, NORMAL ACROSS FLATS, WITH LOCKING HOLES, ISO M OR ISO MJ THREADS, FINE PITCH THREADS, 4H5H TOLERANCE CLASS |
| NFL 22-571 : A | AIRCRAFT BOLTS AND NUTS - NUTS, ANCHOR, SELF-LOCKING, TWO LUG, REDUCED SERIES, WITH COUNTERBORE, ISO M OR ISO MJ THREADS, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| NFL 22-575 : A | AIRCRAFT BOLTS AND NUTS - NUTS, ANCHOR, SELF-LOCKING, FLOATING, TWO LUG, WITH COUNTERBORE, ISO M OR ISO MJ THREADS, IN STEEL, CADMIUM PLATED, MOS2 LUBRICATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREE C |
| PREN 4164 : 200P2 | AEROSPACE SERIES - SCREWS, 100 DEGREE COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| 09/30204325 DC : 0 | BS EN 4156 - AEROSPACE SERIES - ROD ENDS, WITH SELF-ALIGNING DOUBLE ROW BALL BEARINGS AND THREADED SHANK IN STEEL - INNER RING AND BALLS IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS - INCH SERIES |
| PREN 2882 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGONAL, SELF-LOCKING, WITH COUNTERBORE AND CAPTIVE WASHER, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 3059 : 200P2 | AEROSPACE SERIES - BEARINGS, AIRFRAME ROLLING - RIGID SINGLE ROW BALL BEARINGS IN STEEL WITH FLANGED ALIGNMENT HOUSING, CADMIUM PLATED - DIMENSIONS AND LOADS |
| PREN 2855 : 200P2 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, 90 DEGREES CORNER, REDUCED SERIES, WITH COUNTERBORE - CLASSIFICATION: 1100 MPA/235 DEGREES C |
| PREN 3226 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGON, PLAIN, NORMAL HEIGHT, NORMAL ACROSS FLATS, IN STEEL, CADMIUM PLATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 4854-1 : 200P1 | AEROSPACE SERIES - BEARING, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, LOW STARTING TORQUE AND LOW FRICTION COEFFICIENT, ELEVATED DUTY CYCLES UNDER LOW OSCILLATIONS AT DIFFERENT OPERATING CONDITIONS - PART 1: DIMENSIONS AND LOADS FOR NARROW SERIES |
| PREN 2878 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, AIR RESISTANT, SEALING, FLOATING, TWO LUG, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 2859 : 1 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 2866 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, ONE LUG, WITH COUNTERBORE, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 2491 : 200P1 | AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY LUBRICANTS - COATING METHODS |
| PREN 2596 : 200P1 | AEROSPACE SERIES - WASHERS, LOCK, WITH RADIAL SERRATIONS IN CORROSION RESISTING STEEL, CADMIUM PLATED FOR FLIGHT CONTROL RODS - DIMENSIONS |
| PREN 2862 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, 90 DEGREES CORNER, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| NF EN 3753 : 2010 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, 60 DEGREES CORNER, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 3434 : 200P4 | AEROSPACE SERIES - NUTS, HEXAGON, SLOTTED/CASTELLATED, SELF-LOCKING, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| PREN 4161 : 200P1 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| PREN 4200 : 200P1 | AEROSPACE SERIES - WASHERS, 100 DEGREES DIMPLED, IN STEEL, CADMIUM PLATED |
| PREN 4351 : 200P1 | AEROSPACE SERIES - ROD ENDS, WITH SELF-ALIGNING DOUBLE ROW BALL BEARINGS AND THREADED SHANK IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS - INCH SERIES |
| PREN 4538-3 : 200P1 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER ELEVATED LOAD UNDER LOW OSCILLATIONS - NARROW SERIES - DIMENSIONS AND LOADS - PART 003: INCH SERIES WITH LOW FRICTION COEFFICIENT |
| PREN 4266 : 200P2 | AEROSPACE SERIES - BEARING SPHERICAL PLAIN, METAL TO METAL, IN CORROSION RESISTING STEEL, CADMIUM PLATED - WIDE SERIES - DIMENSIONS AND LOADS - INCH SERIES |
| PREN 4613 : 200P1 | AEROSPACE SERIES - SPHERICAL PLAIN BEARINGS IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, NARROW SERIES - DIMENSIONS AND LOADS - INCH SERIES |
| PREN 4419 : 200P1 | AEROSPACE SERIES - WASHERS, CHAMFERED, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED |
| PREN 4079 : 200P2 | AEROSPACE SERIES - SCREWS, 100 DEGREE COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| PREN 4136 : 200P1 | AEROSPACE SERIES - BOLTS, NORMAL BI-HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| PREN 4132 : 200P1 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| I.S. EN 2862:2009 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, 90 DEGREE CORNER, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| I.S. EN 4163:2016 | AEROSPACE SERIES - SCREWS 100 DEGREES COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| NF EN 4161 : 2010 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| I.S. EN 2811:2016 | AEROSPACE SERIES - NUTS, HEXAGON, SLOTTED/CASTELLATED IN STEEL CADMIUM PLATED - CLASSIFICATION: 1100 MPA/235 DEGREES C |
| I.S. EN 4129:2009 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| ISO 9219:2002 | Aerospace — Bolts, thin hexagonal head, for pulleys, close tolerance shank, short thread, in alloy steel and cadmium plated or in titanium alloy and MoS2 lubricated or in corrosion-resistant steel and passivated — Dimensions and masses |
| NF EN 4129 : 2009 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| DIN EN 3303:1997-03 | AEROSPACE SERIES - SCREWS, CAP HEAD, HEXAGON SOCKET, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| DIN EN 3141:1996-04 | AEROSPACE SERIES - RIVETS, SOLID, UNIVERSAL HEAD, IN HEAD RESISTING NICKEL BASE ALLOY NI-P11, CADMIUM PLATED, INCH BASED SERIES |
| DIN EN 3305:1996-11 | AEROSPACE SERIES - SCREWS, 100 DEGREE COUNTERSUNK HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| BS EN 2882:2006 | Aerospace series. Nuts, hexagonal, self-locking, with counterbore and captive washer, in steel, cadmium plated, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature) / 235°C |
| BS EN 2413:1995 | Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature)/235°C |
| BS EN 3060:2007 | Aerospace series. Bearings, airframe rolling. Rigid single row ball bearings in steel, cadmium plated, with flanged alignment housing, cadmium plated. Dimensions and loads |
| BS EN 3305:1997 | Screws, 100° countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature)/235°C |
| BS EN 2327:2006 | Aerospace series. Washers, lock, with radial serrations in alloy steel, cadmium plated for flight control rods. Dimensions |
| BS EN 3141:1996 | Rivets, solid, universal head, in heat resisting nickel base alloy NI-P11, cadmium plated, inch based series |
| BS EN 2648:2013 | Aerospace series. Washers, concave, in alloy steel, cadmium plated |
| BS EN 2859:2006 | Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature) / 235°C |
| BS EN 2264:1996 | Nuts, anchor, self-locking, floating, two lug, incremental counterbore, in alloy steel, cadmium plated MoS<sub>2</sub> lubricated. Classification: 900 MPa (at ambient temperature) /235°C |
| BS EN 2753:1996 | Nuts, anchor, self-locking, fixed, single lug, with counterbore, in alloy steel, cadmium plated, MoS<sub>2</sub> lubricated. Classification. 1100 MPa (at ambient temperature) / 235°C |
| BS EN 3626:2006 | Aerospace series. Nuts, hexagon, self-locking in steel, cadmium plated, MoS<sub>2</sub> lubricated. Classification: 1100 MPa (at ambient temperature) / 235°C |
| EN 4613:2009 | Aerospace series - Spherical plain bearings in corrosion resisting steel with self-lubricating liner, narrow series - Dimensions and loads - Inch series |
| EN 4614:2009 | Aerospace series - Spherical plain bearings in corrosion resisting steel with self-lubricating liner, wide series - Dimensions and loads - Inch series |
| PREN 6098 : DRAFT 2018 | AEROSPACE SERIES - ROD-END WITH BEARING PER EN 6097 IN CORROSION RESISTING STEEL, EXTRA WIDE INNER RING, EXTERNAL THREADED SHANK - DIMENSIONS AND LOADS - INCH SERIES |
| I.S. EN 2882:2006 | AEROSPACE SERIES - NUTS, HEXAGONAL, SELF-LOCKING, WITH COUNTERBORE AND CAPTIVE WASHER, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| PREN 6055 : DRAFT 2018 | AEROSPACE SERIES - ROD-END WITH BEARING PER EN 4265 IN CORROSION RESISTING STEEL, EXTERNAL THREADED SHANK - DIMENSIONS AND LOADS - INCH SERIES |
| PREN 6133 : DRAFT 2018 | AEROSPACE SERIES - ROD-END, WITH BEARING PER EN 6096, WITH SELF-LUBRICATING LINER IN CORROSION RESISTING STEEL, EXTRA WIDE INNER RING, EXTERNAL THREADED SHANK - DIMENSIONS AND LOADS - INCH SERIES |
| PREN 6056 : DRAFT 2018 | AEROSPACE SERIES - ROD-END WITH BEARING PER EN 4614 WITH SELF LUBRICATING LINER IN CORROSION RESISTING STEEL WITH EXTERNAL THREADED SHANK - DIMENSIONS AND LOADS - INCH SERIES |
| EN 9100:2009 | Quality Management Systems - Requirements for Aviation, Space and Defense Organizations |
| EN 2832:1993 | Aerospace series - Hydrogen embrittlement of steels - Notched specimen test |
| ISO 2082:2017 | Metallic and other inorganic coatings — Electroplated coatings of cadmium with supplementary treatments on iron or steel |
| EN ISO 3497 : 2000 | METALLIC COATINGS - MEASUREMENTS OF COATING THICKNESS - X-RAY SPECTROMETRIC METHODS |
| ISO 1463:2003 | Metallic and oxide coatings Measurement of coating thickness Microscopical method |
| EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
| EN ISO 2082:2017 | Metallic and other inorganic coatings - Electroplated coatings of cadmium with supplementary treatments on iron or steel (ISO 2082:2017) |
| ISO 2819:1980 | Metallic coatings on metallic substrates — Electrodeposited and chemically deposited coatings — Review of methods available for testing adhesion |
| ISO 3497:2000 | Metallic coatings Measurement of coating thickness X-ray spectrometric methods |
| ISO 4520:1981 | Chromate conversion coatings on electroplated zinc and cadmium coatings |
| ISO 2178:2016 | Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method |
| EN ISO 2177 : 2004 | METALLIC COATINGS - MEASUREMENT OF COATING THICKNESS - COULOMETRIC METHOD BY ANODIC DISSOLUTION |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| EN 2831:1993 | Aerospace series - Hydrogen embrittlement of steels - Test by slow bending |
| ISO 2177:2003 | Metallic coatings — Measurement of coating thickness — Coulometric method by anodic dissolution |
| EN 2828:1993 | Aerospace series - Adhesion test for metallic coatings by burnishing |
| EN ISO 2178:2016 | Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:2016) |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.