EN 274-1:2002
Current
The latest, up-to-date edition.
01-23-2002
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
4.1 General
4.2 Appearance of surfaces
4.3 Materials
4.4 Design
4.4.1 Waste outlets
4.4.2 Traps
4.5 Dimensions
4.6 Hydraulic requirements
4.7 Tightness
4.7.1 Tightness of waste outlet with plug or flap
4.7.2 Tightness of waste fitting
5 Marking
6 Quality control
Annex A (informative) A-Deviation
Bibliography
This standard specifies the dimensional, performance, materials and marking requirements for waste outlets, traps and overflows for kitchen sinks, shower trays, wash basins, bidets and baths which are connected to gravity drainage systems, whatever the purpose of the building.This standard does not specify requirements for waste outlets, traps and overflows which are integral with sanitary appliances.NOTE All figures in this standard are diagrammatic only.This standard does not cover the possible effect of aggressive drain cleaning materials on products.
| Committee |
CEN/TC 165
|
| DevelopmentNote |
Together with EN 274-2 and EN 274-3, it supersedes EN 274, EN 329 and EN 411. (09/2002)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNI EN 274-1 : 2004 | Identical |
| SN EN 274-1 : 2002 | Identical |
| NS EN 274-1 : 1ED 2002 | Identical |
| NF EN 274-1 : 2002 | Identical |
| PN EN 274-1 : 2004 | Identical |
| I.S. EN 274-1:2002 | Identical |
| NBN EN 274-1 : 2002 | Identical |
| NEN EN 274-1 : 2002 | Identical |
| BS EN 274-1:2002 | Identical |
| UNE-EN 274-1:2002 | Identical |
| DIN EN 274-1:2002-05 | Identical |
| BS EN 16323:2014 | Glossary of wastewater engineering terms |
| BS EN 695:2005 | Kitchen sinks. Connecting dimensions |
| BS EN 13407 : 2015 | WALL-HUNG URINALS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| BS EN 251:2012 | Shower trays. Connecting dimensions |
| BS EN 232:2012 | Baths. Connecting dimensions |
| DIN EN 15200:2007-08 | SANITARY APPLIANCES - MULTIFUNCTION SHOWER CABINETS |
| 10/30208463 DC : DRAFT DEC 2010 | BS EN 232 - BATHS - CONNECTING DIMENSIONS |
| I.S. EN 13407:2015 | WALL-HUNG URINALS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| DIN EN 13407:2015-09 | WALL-HUNG URINALS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| I.S. EN 16323:2014 | GLOSSARY OF WASTEWATER ENGINEERING TERMS |
| PREN 13407 : DRAFT 2014 | WALL-HUNG URINALS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| EN 695:2005 | Kitchen sinks - Connecting dimensions |
| I.S. EN 695:2005 | KITCHEN SINKS - CONNECTING DIMENSIONS |
| I.S. EN 232:2012 | BATHS - CONNECTING DIMENSIONS |
| I.S. EN 251:2012 | SHOWER TRAYS - CONNECTING DIMENSIONS |
| 03/110852 DC : DRAFT JULY 2003 | BS EN 695 - KITCHEN SINKS - CONNECTING DIMENSIONS |
| I.S. EN 274-3:2002 | WASTE FITTINGS FOR SANITARY APPLIANCES - PART 3: QUALITY CONTROL |
| I.S. EN 274-2:2002 | WASTE FITTINGS FOR SANITARY APPLIANCES - PART 2: TEST METHODS |
| 10/30208466 DC : DRAFT DEC 2010 | BS EN 251 - SHOWER TRAYS - CONNECTING DIMENSIONS |
| 05/30132908 DC : DRAFT APR 2005 | EN 15200 - SANITARY APPLIANCES - MULTIFUNCTION SHOWER CABINETS |
| UNI EN 16323 : 2014 | GLOSSARY OF WASTEWATER ENGINEERING TERMS |
| DIN EN 232:2013-01 | Baths - Connecting dimensions |
| EN 251:2012 | Shower trays - Connecting dimensions |
| UNI EN 695 : 2005 | KITCHEN SINKS - CONNECTING DIMENSIONS |
| UNI EN 232 : 2012 | BATHS - CONNECTING DIMENSIONS |
| UNI EN 251 : 2012 | SHOWER TRAYS - CONNECTING DIMENSIONS |
| UNI EN 15200 : 2007 | SANITARY APPLIANCES - MULTIFUNCTION SHOWER CABINETS |
| DIN EN 16323:2014-07 | GLOSSARY OF WASTEWATER ENGINEERING TERMS |
| 14/30311451 DC : 0 | BS EN 13407 - WALL-HUNG URINALS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| BS EN 274-2:2002 | Waste fitting for sanitary appliances Test methods |
| DIN EN 15200 E : 2007 | SANITARY APPLIANCES - MULTIFUNCTION SHOWER CABINETS |
| UNE-EN 13407:2016 | Wall-hung urinals - Functional requirements and test methods |
| BS EN 15200:2007 | Sanitary appliances. Multifunction shower cabinets |
| UNE-EN 251:2014 | Shower trays - Connecting dimensions |
| EN 15200:2007/AC:2009 | SANITARY APPLIANCES - MULTIFUNCTION SHOWER CABINETS |
| EN 274-2:2002 | Waste fittings for sanitary appliances - Part 2: Test methods |
| EN 232:2012 | Baths - Connecting dimensions |
| EN 16323:2014 | Glossary of wastewater engineering terms |
| EN 274-3:2002 | Waste fittings for sanitary appliances - Part 3: Quality control |
| 11/30250267 DC : 0 | BS EN 16323 - GLOSSARY OF WASTEWATER ENGINEERING TERMS |
| DIN 1986-3:2004-11 | DRAINAGE SYSTEMS ON PRIVATE GROUND - PART 3: SPECIFICATIONS FOR SERVICE AND MAINTENANCE |
| EN 13407:2015 | WALL-HUNG URINALS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| UNE-EN 16323:2014 | Glossary of wastewater engineering terms |
| DIN EN 251:2013-01 | Shower trays - Connecting dimensions |
| DIN EN 274-2:2002-05 | WASTE FITTINGS FOR SANITARY APPLIANCES - PART 2: TEST METHODS |
| DIN EN 695:2005-11 | Kitchen sinks - Connecting dimensions; German version EN 695:2005 |
| DIN EN 274-3:2002-05 | WASTE FITTINGS FOR SANITARY APPLIANCES - PART 3: QUALITY CONTROL |
| EN 35:2014 | PEDESTAL AND WALL-HUNG BIDETS WITH OVER-RIM SUPPLY - CONNECTING DIMENSIONS |
| EN 36:1998 | Wall-hung bidets with overrim supply - Connecting dimensions |
| EN 251:2012 | Shower trays - Connecting dimensions |
| EN 12056-2:2000 | Gravity drainage systems inside buildings - Part 2: Sanitary pipework, layout and calculation |
| EN 32:1998 | Wall-hung wash basins - Connecting dimensions |
| EN 695:2005 | Kitchen sinks - Connecting dimensions |
| EN 12056-1:2000 | Gravity drainage systems inside buildings - Part 1: General and performance requirements |
| EN 111:2003 | Wall-hung hand rinse basins - Connecting dimensions |
| EN 232:2012 | Baths - Connecting dimensions |
| EN 31:2011+A1:2014 | Wash basins - Connecting dimensions |
| EN 476:2011 | General requirements for components used in drains and sewers |
| EN 274-3:2002 | Waste fittings for sanitary appliances - Part 3: Quality control |
| EN 274-2:2002 | Waste fittings for sanitary appliances - Part 2: Test methods |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| EN 248:2002 | Sanitary tapware - General specification for electrodeposited coatings of Ni-Cr |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.