EN 2808:1997
Current
The latest, up-to-date edition.
Aerospace series - Anodizing of titanium and titanium alloys
03-19-1997
Committees responsible
National foreword
Foreword
Specification
1 Scope
2 Purpose of the process
3 Limitation of application of the process
4 Normative references
5 Definitions
6 Information for the processor
7 Condition of parts prior to processing
8 Pre-treatments
9 Treatment
10 Removal of the anodic coating
11 Required characteristics
12 Inspection method
13 Quality assurance
14 Health, safety and environmental aspects
15 Designation
Annexes
A (informative) Pickling of titanium and removal of
the anodic coating
B (informative) Anodizing
This standard specifies the anodizing of titanium and titanium alloys. It shall be applicable whenever referenced.
| Committee |
ASD-STAN
|
| DevelopmentNote |
Supersedes PREN 2808. (11/2003)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| PN EN 2808 : 2000 | Identical |
| UNI EN 2808 : 1998 | Identical |
| SNV DIN EN 2808 : 1997 | Identical |
| NS EN 2808 : 1ED 1997 | Identical |
| NEN EN 2808 : 1997 | Identical |
| BS EN 2808:1997 | Identical |
| NBN EN 2808 : 1997 | Identical |
| DIN EN 2808:1997-05 | Identical |
| UNE-EN 2808:1997 | Identical |
| NF EN 2808 : 1997 | Identical |
| I.S. EN 2808:1997 | Identical |
| BS EN 6092:2016 | Aerospace series. Receptacle, floating, double lug |
| 17/30369678 DC : 0 | PREN 7010 - AEROSPACE SERIES - USER GUIDE FOR CREATION AND DESIGNATION OF BOLTS |
| PREN 6093 : 200P1 | AEROSPACE SERIES - RECEPTACLE, FLOATING, SINGLE LUG |
| NF EN 4035 : 2006 | AEROSPACE SERIES - ROD ENDS, ADJUSTABLE WITH SELF-ALIGNING DOUBLE ROW BALL BEARING IN CORROSION RESISTING STEEL, REDUCED INTERNAL RADIAL CLEARANCE AND THREADED SHANK IN TITANIUM ALLOY - DIMENSIONS AND LOADS |
| BS EN 4173:2006 | Aerospace series. Lockbolts, 100 countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series. Classification: 1100 MPa (at ambient temperature) / 315°C |
| BS EN 3267:2001 | Aerospace series. Washers, bulkhead in titanium alloy |
| I.S. EN 4035:2006 | AEROSPACE SERIES - ROD ENDS, ADJUSTABLE WITH SELF-ALIGNING DOUBLE ROW BALL BEARING IN CORROSION RESISTING STEEL, REDUCED INTERNAL RADIAL CLEARANCE AND THREADED SHANK IN TITANIUM ALLOY - DIMENSIONS AND LOADS |
| I.S. EN 6094:2016 | AEROSPACE SERIES - WASHER, SPRING, COUNTERSUNK |
| PREN 6092 : 200P2 | AEROSPACE SERIES - RECEPTACLE, FLOATING, DOUBLE LUG |
| PREN 4035 : 200P1 | AEROSPACE SERIES - ROD ENDS, ADJUSTABLE WITH SELF-ALIGNING DOUBLE ROW BALL BEARING IN CORROSION RESISTING STEEL, REDUCED INTERNAL RADIAL CLEARANCE AND THREADED SHANK IN TITANIUM ALLOY - DIMENSIONS AND LOADS |
| SAE AS 5958 : 2017 | FITTINGS, AXIALLY SWAGED TUBE WITH FLARELESS SEPARABLE, FLUID SYSTEM FOR OPERATING PRESSURES UP TO AND INCLUDING 5080 PSI (35 000 KPA), SPECIFICATION FOR |
| EN 4035:2006 | Aerospace series - Rod ends, adjustable with self-aligning double row ball bearing in corrosion resisting steel, reduced internal radial clearance and threaded shank in titanium alloy - Dimensions and loads |
| PREN 3267 : 200P1 | AEROSPACE SERIES - WASHER, BULKHEAD IN TITANIUM ALLOY |
| I.S. EN 6092:2016 | AEROSPACE SERIES - RECEPTACLE, FLOATING, DOUBLE LUG |
| BS EN 6094:2016 | Aerospace series. Washer, spring, countersunk |
| PREN 4173 : 200P1 | AEROSPACE SERIES - LOCKBOLTS, 100 DEGREE COUNTERSUNK NORMAL HEAD, SHEARTYPE, CLOSE TOLERANCE, IN TITANIUM ALLOY TI-P64001, ANODIZED, METRIC SERIES - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| ONORM EN 4035 : 2006 | AEROSPACE SERIES - ROD ENDS, ADJUSTABLE WITH SELF-ALIGNING DOUBLE ROW BALL BEARING IN CORROSION RESISTING STEEL, REDUCED INTERNAL RADIAL CLEARANCE AND THREADED SHANK IN TITANIUM ALLOY - DIMENSIONS AND LOADS |
| BS EN 4172:2006 | Aerospace series. Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series. Classification: 1 100 MPa (at ambient temperature) / 315°C |
| BS EN 4035:2006 | Aerospace series. Rod ends, adjustable with self-aligning double row ball bearing in corrosion resisting steel, reduced internal radial clearance and threaded shank in titanium alloy. Dimensions and loads |
| EN 6094:2016 | Aerospace series - Washer, spring, countersunk |
| EN 6092:2016 | Aerospace series - Receptacle, floating, double lug |
| EN 4172 : 2006 | Aerospace series - Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C |
| EN 3267:2001 | Aerospace series - Washers, bulkhead, in titanium alloy |
| EN 4173:2006 | Aerospace series - Lockbolts, 100° countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C |
| PREN 4172 : 200P1 | AEROSPACE SERIES - LOCKBOLTS, PROTRUDING HEAD, SHEARTYPE, CLOSE TOLERANCE, IN TITANIUM ALLOY TI-P64001, ANODIZED, METRIC SERIES - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| EN 2497 : 1989 | AEROSPACE SERIES - DRY ABRASIVE BLASTING OF TITANIUM AND TITANIUM ALLOYS |
| EN 2000:1991 | Aerospace series - Quality assurance - EN aerospace products - Approval of the quality system of manufacturers |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.