EN 474-5:2006+A3:2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
04-08-2022
07-24-2013
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of additional significant hazards
5 Safety requirements and/or measures
6 Information for use
Annex A (informative) - List of additional
significant hazards - Hydraulic
excavators
Annex B (informative) - Rated lift capacity tables
for object handling
Annex C (normative) - Requirements for excavator
swing brakes
Annex D (informative) - Illustrations
Annex ZA (informative) - Relationship between this
European Standard and the Essential
Requirements of EU Directive 2006/42/EC
Bibliography
This part of EN 474 deals with all specific significant hazards, hazardous situations and events relevant to hydraulic excavators as defined in EN ISO 6165:2006, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).This part also deals with object handling application, shovel application and log application.The requirements of this part are complementary to the common requirements formulated in EN 474-1:2006+A3:2013.This part does not repeat the requirements from EN 474-1:2006+A3:2013, but adds or replaces the requirements for application for hydraulic excavators.This part specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards, hazardous situations and events during commissioning, operation and maintenance of hydraulic excavators.This European Standard is not applicable to hydraulic excavators manufactured before the date of publication of this European Standard by CEN.
| DevelopmentNote |
2006 Edition Re-Issued in July 2013 & incorporates AMD 3 2013. (08/2013)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| Standards | Relationship |
| ONORM EN 474-5 : 2013 | Identical |
| DIN EN 474-5:2013-12 | Identical |
| NEN EN 474-5 : 2006 + A3 2013 | Identical |
| UNE-EN 474-5:2007 | Identical |
| NS EN 474-5 : 2006 + A3 2013 | Identical |
| BS EN 474-5 : 2006 | Identical |
| SN EN 474-5+A3:2013 | Identical |
| UNI EN 474-5 : 2013 | Identical |
| NBN EN 474-5 : 2007 + A3 2013 | Identical |
| NF EN 474-5 : 1996 + A3 2013 | Identical |
| PN EN 474-5 : 2007 + A3 2013 | Identical |
| I.S. EN 474-5:2006 | Identical |
| UNE-EN 474-5:2007+A3:2013 | Identical |
| BS EN 474-5:2006+A3:2013 | Identical |
| I.S. EN 474-5:2006+A3:2013 | Identical |
| 11/30236563 DC : 0 | BS EN 16228-4 - DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 4: FOUNDATION EQUIPMENT |
| DIN EN 16228-4:2014-10 | Drilling and foundation equipment - Safety - Part 4: Foundation equipment |
| 08/30179253 DC : DRAFT JULY 2008 | BS EN 474-1 AMD1 - EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| EN 474-1:2006+A5:2018 | Earth-moving machinery - Safety - Part 1: General requirements |
| PD ISO/TR 12603:2010 | Building construction machinery and equipment. Classification |
| DIN EN 474-1:2014-03 | EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| BS EN 12111:2014 | Tunnelling machines. Road headers and continuous miners. Safety requirements |
| EN 16228-1:2014 | Drilling and foundation equipment - Safety - Part 1: Common requirements |
| EN 16228-4:2014 | Drilling and foundation equipment - Safety - Part 4: Foundation equipment |
| CEN/TS 13778:2004 | Mobile demolition machinery - Safety requirements |
| BS EN 16228-4:2014 | Drilling and foundation equipment. Safety Foundation equipment |
| DIN EN 16228-5:2014-10 | Drilling and foundation equipment - Safety - Part 5: Diaphragm walling equipment |
| 11/30236548 DC : 0 | BS EN 474-1:2006/A3 - EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| UNI EN 16228-1 : 2014 | DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS |
| UNI EN 16228-4 : 2014 | DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 4: FOUNDATION EQUIPMENT |
| DIN EN 16228-1:2014-10 | Drilling and foundation equipment - Safety - Part 1: Common requirements; German version EN 16228-1:2014 |
| UNE-EN 16228-5:2015 | Drilling and foundation equipment - Safety - Part 5: Diaphragm walling equipment |
| I.S. CEN TS 13778:2004 | MOBILE DEMOLITION MACHINERY - SAFETY REQUIREMENTS |
| BS EN 474-1:2006+A6:2019 | Earth-moving machinery. Safety General requirements |
| I.S. EN 12111:2014 | TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS |
| BS EN 16228-1:2014 | Drilling and foundation equipment. Safety Common requirements |
| DD CEN/TS 13778:2005 | Mobile demolition machinery. Safety requirements |
| I.S. EN 16228-5:2014 | DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 5: DIAPHRAGM WALLING EQUIPMENT |
| I.S. EN 474-1:2006 | EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| ISO/TR 12603:2010 | Building construction machinery and equipment Classification |
| UNI EN 12111 : 2014 | TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS |
| I.S. EN 16228-4:2014 | DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 4: FOUNDATION EQUIPMENT |
| BS EN 16228-5:2014 | Drilling and foundation equipment. Safety Diaphragm walling equipment |
| UNI EN 16228-5 : 2014 | DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 5: DIAPHRAGM WALLING EQUIPMENT |
| I.S. EN 16228-1:2014 | DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS |
| BS EN 474-1 : 2006 | EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 16228-1:2015 | Drilling and foundation equipment - Safety - Part 1: Common requirements |
| UNE-EN 16228-4:2015 | Drilling and foundation equipment - Safety - Part 4: Foundation equipment |
| 11/30236567 DC : 0 | BS EN 16228-5 - DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 5: DIAPHRAGM WALLING EQUIPMENT |
| EN 16228-5:2014 | Drilling and foundation equipment - Safety - Part 5: Diaphragm walling equipment |
| EN 12111:2014 | Tunnelling machines - Road headers and continuous miners - Safety requirements |
| ISO 3449:2005 | Earth-moving machinery — Falling-object protective structures — Laboratory tests and performance requirements |
| ISO 10262:1998 | Earth-moving machinery Hydraulic excavators Laboratory tests and performance requirements for operator protective guards |
| EN ISO 6683:2008 | Earth-moving machinery - Seat belts and seat belt anchorages - Performance requirements and tests (ISO 6683:2005) |
| ISO 6014:1986 | Earth-moving machinery — Determination of ground speed |
| ISO 7096:2000 | Earth-moving machinery Laboratory evaluation of operator seat vibration |
| ISO 6683:2005 | Earth-moving machinery Seat belts and seat belt anchorages Performance requirements and tests |
| EN ISO 3449:2008 | Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements (ISO 3449:2005) |
| ISO 5010:2007 | Earth-moving machinery Rubber-tyred machines Steering requirements |
| ISO 6165:2012 | Earth-moving machinery — Basic types — Identification and terms and definitions |
| EN 13531:2001+A1:2008 | Earth-moving machinery - Tip-over protection structure (TOPS) for compact excavators - Laboratory tests and performance requirements (ISO 12117:1997 modified) |
| ISO 3471:2008 | Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements |
| ISO 7546:1983 | Earth-moving machinery Loader and front loading excavator buckets Volumetric ratings |
| EN ISO 12100-1:2003/A1:2009 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY |
| EN ISO 6165:2012 | Earth-moving machinery - Basic types - Identification and terms and definitions (ISO 6165:2012) |
| EN ISO 3471:2008 | Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements (ISO 3471:2008) |
| ISO 12117-2:2008 | Earth-moving machinery — Laboratory tests and performance requirements for protective structures of excavators — Part 2: Roll-over protective structures (ROPS) for excavators of over 6 t |
| EN ISO 6682:2008 | Earth-moving machinery - Zones of comfort and reach for controls (ISO 6682:1986, including Amd 1:1989) |
| ISO 7451:2007 | Earth-moving machinery Volumetric ratings for hoe-type and grab-type buckets of hydraulic excavators and backhoe loaders |
| ISO 12117:1997 | Earth-moving machinery — Tip-over protection structure (TOPS) for compact excavators — Laboratory tests and performance requirements |
| ISO 10567:2007 | Earth-moving machinery — Hydraulic excavators — Lift capacity |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| ISO 8643:2017 | Earth-moving machinery — Hydraulic excavator and backhoe loader lowering control device — Requirements and tests |
| ISO 7135:2009 | Earth-moving machinery Hydraulic excavators Terminology and commercial specifications |
| EN ISO 2867:2011 | Earth-moving machinery - Access systems (ISO 2867:2011) |
| 1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
| ISO 6016:2008 | Earth-moving machinery — Methods of measuring the masses of whole machines, their equipment and components |
| ISO 2867:2011 | Earth-moving machinery Access systems |
| EN 12643:2014 | Earth-moving machinery - Rubber-tyred machines - Steering requirements (ISO 5010:1992 modified) |
| EN ISO 7096:2008/AC:2009 | EARTH-MOVING MACHINERY - LABORATORY EVALUATION OF OPERATOR SEAT VIBRATION |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.