• There are no items in your cart

EN 558:2017

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves
Superseded date

03-05-2022

Published date

02-15-2017

European Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Dimensions and tolerances
Annex A (informative) - Origin of basic series
Annex B (informative) - Relationship between DN and NPS
Bibliography

This European Standard specifies the "face-to-face" (FTF) and "centre-to-face" (CTF) dimensions for PN and Class designated metal valves used in flanged pipe systems.This European Standard covers valves with the following PN, Class and DN values:-PN 2,5; PN 6; PN 10; PN 16; PN 25; PN 40; PN 63; PN 100; PN 160; PN 250; PN 320; PN 400;-Class 125; Class 150; Class 250; Class 300; Class 600; Class 900; Class 1 500; Class 2 500;-DN 10; DN 15; DN 20; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200; DN 250; DN 300; DN 350; DN 400; DN 450; DN 500; DN 600; DN 700; DN 750; DN 800; DN 900; DN 1 000; DN 1050; DN 1 200; DN 1 400; DN 1 600; DN 1 800; DN 2 000.For valves in other shell materials than metal the same FTF and CTF dimensions may be used.For relationship between DN and NPS see Annex B.

Committee
CEN/TC 69
DevelopmentNote
Supersedes EN 558-1 and EN 558-2. (03/2008) Supersedes EN 26554 and PREN 558. (02/2017)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
UNE-EN 558:2018 Identical
UNE-EN 558:2008 Identical
UNI EN 558:2017 Identical
ONORM EN 558 : 2017 Identical
UNI EN 558 : 2012 Identical
DIN EN 558:2017-05 Identical
I.S. EN 558:2017 Identical
SN EN 558 : 2017 Identical
NS EN 558 : 2017 Identical
NF EN 558 : 2017 Identical
NBN EN 558 : 2008 + A1 2012 Identical
BS EN 558:2017 Identical
PN EN 558 : 2017 Identical
NEN EN 558 : 2017 Identical

DIN EN 16722 E : 2015 INDUSTRIAL VALVES - ENDTOEND AND CENTRETOEND DIMENSIONS FOR VALVES WITH THREADED ENDS
09/30205886 DC : 0 BS EN 13789 - INDUSTRIAL VALVES - CAST IRON GLOBE VALVES
PREN 1171 : DRAFT 2014 INDUSTRIAL VALVES - CAST IRON GATE VALVES
11/30243885 DC : 0 BS EN 13774 - VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS
I.S. EN 16722:2015 INDUSTRIAL VALVES - END-TO-END AND CENTRE-TO-END DIMENSIONS FOR VALVES WITH THREADED ENDS
PREN 14141 : DRAFT 2011 VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS
BS EN 593:2017 Industrial valves. Metallic butterfly valves for general purposes
14/30301577 DC : 0 BS EN 16767 - INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES
08/30187521 DC : 0 BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES
12/30250279 DC : 0 BS EN 12252 - LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
UNE-EN 13547:2014 Industrial valves - Copper alloy ball valves
I.S. EN 13547:2013 INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES
EN 12982:2009 Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves
EN 736-3:2008 Valves - Terminology - Part 3: Definition of terms
DIN EN 13709:2010-10 Industrial valves - Steel globe and globe stop and check valves
DIN EN 12982:2009-11 Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves
BS EN 14141:2013 Valves for natural gas transportation in pipelines. Performance requirements and tests
UNE-EN 1983:2014 Industrial valves - Steel ball valves
UNE-EN 16722:2016 Industrial valves - End-to-end and centre-to-end dimensions for valves with threaded ends
BS EN 12288:2010 Industrial valves. Copper alloy gate valves
BS EN 1984:2010 Industrial valves. Steel gate valves
I.S. EN 12288:2010 INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES
I.S. EN 12982:2009 INDUSTRIAL VALVES - END-TO-END AND CENTRE-TO-END DIMENSIONS FOR BUTT WELDING END VALVES
DIN EN 736-3:2008-04 Valves - Terminology - Part 3: Definition of terms
EN 12288:2010 Industrial valves - Copper alloy gate valves
EN 13547:2013 Industrial valves - Copper alloy ball valves
EN 1349:2009 Industrial process control valves
BS EN 1349:2009 Industrial process control valves
PREN 13774 : DRAFT 2011 VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS
14/30296044 DC : 0 BS EN 16722 - INDUSTRIAL VALVES - END-TO-END AND CENTRE-TO-END DIMENSIONS FOR VALVES WITH SCREWED ENDS
PREN 13789 : DRAFT 2009 INDUSTRIAL VALVES - CAST IRON GLOBE VALVES
PREN 13709 : DRAFT 2009 INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES
PREN 1984 : DRAFT 2009 INDUSTRIAL VALVES - STEEL GATE VALVES
I.S. EN 593:2017 INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES
DIN EN 12252:2014-07 LPG equipment and accessories - Equipping of LPG road tankers
DIN EN 12288:2010-10 Industrial valves - Copper alloy gate valves
DIN EN 1171:2015-11 INDUSTRIAL VALVES - CAST IRON GATE VALVES
DIN EN 1984:2010-10 Industrial valves - Steel gate valves
BS EN 12252:2014 LPG equipment and accessories. Equipping of LPG road tankers
UNE-EN 14141:2014 Valves for natural gas transportation in pipelines - Performance requirements and tests
UNE-EN 593:2009 Industrial valves - Metallic butterfly valves
BS EN 13709:2002 Industrial valves. Steel globe and globe stop and check valves
I.S. EN 1171:2015 INDUSTRIAL VALVES - CAST IRON GATE VALVES
I.S. EN 13774:2013 VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS
I.S. EN 1074-6:2009 VALVES FOR WATER SUPPLY - FITNESS FOR PURPOSE REQUIREMENTS AND APPROPRIATE VERIFICATION TESTS - PART 6: HYDRANTS
I.S. EN 736-3:2008 VALVES - TERMINOLOGY - PART 3: DEFINITION OF TERMS
I.S. EN 1984:2010 INDUSTRIAL VALVES - STEEL GATE VALVES
DIN EN 1983:2013-12 INDUSTRIAL VALVES - STEEL BALL VALVES
I.S. EN 12561-3:2011 RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE
DIN EN 12252:2000-10 LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
I.S. EN 14141:2013 VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS
I.S. EN 1983:2013 INDUSTRIAL VALVES - STEEL BALL VALVES
I.S. EN 1349:2009 INDUSTRIAL PROCESS CONTROL VALVES
I.S. EN 13789:2010 INDUSTRIAL VALVES - CAST IRON GLOBE VALVES
I.S. EN 12252:2014 LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
I.S. EN 13709:2010 INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES
UNI EN 1349 : 2010 INDUSTRIAL PROCESS CONTROL VALVES
08/30184280 DC : DRAFT SEP 2008 BS EN 12561-3 - RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE
09/30205883 DC : 0 BS EN 13709 - INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES
09/30205880 DC : DRAFT OCT 2009 BS EN 12288 - INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES
95/709655 DC : DRAFT JUL 1995 PREN 1983 - INDUSTRIAL STEEL BALL VALVES
UNI EN 13547 : 2013 INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES
DIN EN 1074-6:2009-03 VALVES FOR WATER SUPPLY - FITNESS FOR PURPOSE REQUIREMENTS AND APPROPRIATE VERIFICATION TESTS - PART 6: HYDRANTS
DIN EN 14141:2013-08 VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS
UNI EN 12982 : 2009 INDUSTRIAL VALVES - END-TO-END AND CENTRE-TO-END DIMENSIONS FOR BUTT WELDING END VALVES
UNI EN 1983 : 2013 INDUSTRIAL VALVES - STEEL BALL VALVES
UNI EN 12288 : 2010 INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES
UNI EN 13774 : 2013 VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS
UNI EN 13789 : 2010 INDUSTRIAL VALVES - CAST IRON GLOBE VALVES
UNI EN 14141 : 2013 VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS
UNI EN 736-3 : 2008 VALVES - TERMINOLOGY - PART 3: DEFINITION OF TERMS
UNI EN 12561-3 : 2011 RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE
UNI EN 1984 : 2010 INDUSTRIAL VALVES - STEEL GATE VALVES
BS EN 1171:2015 Industrial valves. Cast iron gate valves
UNI EN 13709 : 2010 INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES
UNI EN 12252 : 2014 LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
UNI EN 1074-6 : 2009 VALVES FOR WATER SUPPLY - FITNESS FOR PURPOSE REQUIREMENTS AND APPROPRIATE VERIFICATION TESTS - PART 6: HYDRANTS
DIN EN 13547:2013-12 INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES
09/30205877 DC : 0 BS EN 1984 - INDUSTRIAL VALVES - STEEL GATE VALVES
14/30282872 DC : 0 BS EN 1171 - INDUSTRIAL VALVES - CAST IRON GATE VALVES
11/30248438 DC : 0 BS EN 14141 - VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS
16/30339483 DC : 0 BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES
BS EN 13547:2013 Industrial valves. Copper alloy ball valves
13/30281067 DC : 0 BS EN 12252 - LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
PREN 593 : DRAFT 2016 INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES
BS EN 16722:2015 Industrial valves. End-to-end and centre-to-end dimensions for valves with threaded ends
08/30179182 DC : DRAFT MAY 2008 BS EN 1349 - INDUSTRIAL PROCESS CONTROL VALVES
PREN 12288 : DRAFT 2009 INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES
DIN EN 13789:2010-09 Industrial valves - Cast iron globe valves
DIN EN 13774:2013-05 VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS
BS EN 12561-3:2011 Railway applications. Tank wagons Bottom filling and emptying devices for gases liquefied under pressure
BS EN 13789:2002 Industrial valves. Cast iron globe valves
BS EN 13774:2013 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar. Performance requirements
BS EN 12982:2009 Industrial valves. End-to-end and centre-to-end dimensions for butt welding end valves
UNE-EN 1074-6:2011 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 6: Hydrants
UNE-EN 13774:2013 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements
UNE-EN 12561-3:2012 Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure
BS EN 1983:2013 Industrial valves. Steel ball valves
UNE-EN 12982:2010 Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves
BS EN 1074-6:2008 Valves for water supply. Fitness for purpose requirements and appropriate verification tests Hydrants
EN 13774:2013 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements
EN 13709:2010 Industrial valves - Steel globe and globe stop and check valves
EN 1983:2013 Industrial valves - Steel ball valves
EN 14141:2013 Valves for natural gas transportation in pipelines - Performance requirements and tests
EN 1984:2010 Industrial valves - Steel gate valves
EN 13789:2010 Industrial valves - Cast iron globe valves
EN 593:2017 Industrial valves - Metallic butterfly valves for general purposes
EN 16722:2015 Industrial valves - End-to-end and centre-to-end dimensions for valves with threaded ends
PREN 12252 : DRAFT 2013 LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
10/30234321 DC : DRAFT DEC 2010 BS EN 12561-3 - RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE
DIN EN 12561-3:2011-10 Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure
UNE-EN 1171:2016 Industrial valves - Cast iron gate valves
BS EN 736-3:2008 Valves. Terminology Definition of terms
EN 1074-6:2008 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 6: Hydrants
EN 1171:2015 Industrial valves - Cast iron gate valves
EN 12561-3:2011/AC:2014 RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE
EN 12252:2014 LPG equipment and accessories - Equipping of LPG road tankers
DIN EN 16722:2015-12 INDUSTRIAL VALVES - ENDTOEND AND CENTRETOEND DIMENSIONS FOR VALVES WITH THREADED ENDS

ISA 75.16 : 1994 FACE-TO-FACE DIMENSIONS FOR FLANGED GLOBE-STYLE CONTROL VALVE BODIES (ANSI CLASS 900, 1500, AND 2500)
EN 26554:1991 Flanged automatic steam traps - Face-to-face dimensions (ISO 6554:1980)
ISA 75.15 : 1994 FACE-TO-FACE DIMENSIONS FOR BUTTWELD-END GLOBE-STYLE CONTROL VALVES (ANSI CLASSES 150, 300, 600, 900, 1500, AND 2500)
NFE 29 377 : 1986 INDUSTRIAL VALVES - METALLIC WAFER CHECK VALVES WITH ANGULAR DISPLACEMENT OBTURATOR - SPECIFICATIONS
API 609 : 2016 BUTTERFLY VALVES: DOUBLE-FLANGED, LUG- AND WAFER-TYPE
ASME B16.10 : 2017 FACE-TO-FACE AND END-TO-END DIMENSIONS OF VALVES
NFE 29 305-2 : 1988 ROBINETTERIE INDUSTRIELLE - APPAREILS DE ROBINETTERIE UTILISES DANS LES TUYAUTERIES A BRIDES - DIMENSIONS FACE A FACE - SERIES FR
ISO 5752:1982 Metal valves for use in flanged pipe systems Face-to-face and centre-to-face dimensions
IEC 60534-3-2:2001 Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves
EN 60534-3-2:2001 Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves
ISO 6554:1980 Flanged automatic steam traps — Face-to-face dimensions
API 594 : 2017 CHECK VALVES: FLANGED, LUG, WAFER, AND BUTT-WELDING
DIN 3202-3:1979-10 FACE-TO-FACE DIMENSIONS OF WAFER TYPE VALVES

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.