EN 60695-4:2012
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
FIRE HAZARD TESTING - PART 4: TERMINOLOGY CONCERNING FIRE TESTS FOR ELECTROTECHNICAL PRODUCTS (IEC 60695-4:2012)
Superseded date
08-19-2021
Published date
01-12-2013
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
Annex ZA (normative) - Normative references to international
publications with their corresponding European
publications
Pertains to fire tests for electrotechnical products.
| Committee |
SR 89
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| OVE/ONORM EN 60695-4 : 2013 | Identical |
| NF EN 60695-4 : 2012 | Identical |
| NEN EN IEC 60695-4 : 2012 | Identical |
| UNE-EN 60695-4:2012 | Identical |
| BS EN 60695-4:2012 | Identical |
| CEI EN 60695-4 : 2013 | Identical |
| PN EN 60695-4 : 2012 | Identical |
| SN EN 60695-4 : 1995 | Identical |
| VDE 0471-4 : 2013 | Identical |
| IEC 60695-4:2012 | Identical |
| I.S. EN 60695-4:2012 | Identical |
| NEN 10695-4 : 1995 | Identical |
| DIN EN 60695-4 : 2013 | Identical |
| NBN EN 60695-4 : 2012 | Identical |
| DIN EN 50265-2-2 : 1999 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - TEST FOR RESISTANCE TO VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED CONDUCTOR OR CABLE - PART 2: PROCEDURES - SECTION 2: DIFFUSION FLAME |
| UNE-EN 50200:2016 | Method of test for resistance to fire of unprotected small cables for use in emergency circuits |
| VDE 0482-265-2-1 : 1999 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS TEST FOR RESISTANCE TO VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED CONDUCTOR OR CABLE - PART 2-1: PROCEDURES - 1 KW PRE-MIXED FLAME |
| BS EN 60695-1-40:2014 | Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Insulating liquids |
| CEI EN 60695-1-30 : 2010 | FIRE HAZARD TESTING - PART 1-30: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - PRESELECTION TESTING PROCESS - GENERAL GUIDELINES |
| UNE-EN 60695-1-20:2016 | Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance |
| BS EN 60332-3-10:2009 | Tests on electric and optical fibre cables under fire conditions Test for vertical flame spread of vertically-mounted bunched wires or cables. Apparatus |
| BS EN 60695-1-10:2017 | Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. General guidelines |
| 10/30219810 DC : 0 | BS EN 45545-5 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 5: FIRE SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT INCLUDING THAT OF TROLLEY BUSES, TRACK GUIDED BUSES AND MAGNETIC LEVITATION VEHICLES |
| BS EN 50266-2-5:2001 | Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Procedures Small cables. Category D |
| 04/19990095 DC : 0 | BS EN 45545-2 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| CEI EN 60695-9-1 : 2014 | FIRE HAZARD TESTING - PART 9-1: SURFACE SPREAD OF FLAME - GENERAL GUIDANCE |
| CEI EN 60695-1-1 : 2000 | FIRE HAZARD TESTING - PART 1-1: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS GENERAL GUIDELINES |
| I.S. EN 60332-2-2:2004 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 2-2: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE SMALL INSULATED WIRE OR CABLE - PROCEDURE FOR DIFFUSION FLAME |
| DD CLC/TS 45545-5:2009 | Railway applications. Fire protection on railway vehicles Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles |
| BS EN 50267-1:1999 | Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables Apparatus |
| VDE 0482-267-2-1 : 1999 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - TESTS AN GASES EVOLVED DURING COMBUSTION OF MATERIALS FROM CABLES - PART 2-1: PROCEDURES - DETERMINATION OF THE AMOUNT OF HALOGEN ACID GAS |
| BS EN 50266-2-1:2001 | Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Procedures Category A F/R |
| CEI EN 60332-2-2 : 2006 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 2-2: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE SMALL INSULATED WIRE OR CABLE - PROCEDURE FOR DIFFUSION FLAME |
| UNE-EN 60695-9-1:2013 | Fire hazard testing - Part 9-1: Surface spread of flame - General guidance |
| I.S. EN 60695-1-1:2000 | FIRE HAZARD TESTING - PART 1-1: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - GENERAL GUIDELINES |
| I.S. EN 60695-11-20:2015 | FIRE HAZARD TESTING - PART 11-20: TEST FLAMES - 500 W FLAME TEST METHODS |
| I.S. EN 50266-2-1:2001 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - TEST FOR VERTICAL FLAME SPREAD OF VERTICALLY- MOUNTED BUNCHED WIRES OR CABLES - PART 2-1: PROCEDURES - CATEGORY A F/R |
| I.S. EN 60332-1-2:2004 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-2: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - PROCEDURE FOR 1 KW PRE-MIXED FLAME |
| CEI EN 60695-1-21 : 1ED 2017 | FIRE HAZARD TESTING - PART 1-21: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - SUMMARY AND RELEVANCE OF TEST METHODS |
| DIN EN 50267-2-2 : 1999 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - TESTS ON GASES EVOLVED DURING COMBUSTION OF MATERIAL FROM CABLES - PART 2-2: PROCEDURES - DETERMINATION OF DEGREE OF ACIDITY OF GASES FOR MATERIALS BY MEASURING PH AND CONDUCTIVITY |
| I.S. EN 60332-2-1:2004 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 2-1: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE SMALL INSULATED WIRE OR CABLE - APPARATUS |
| I.S. EN 50200:2015 | METHOD OF TEST FOR RESISTANCE TO FIRE OF UNPROTECTED SMALL CABLES FOR USE IN EMERGENCY CIRCUITS |
| EN 60695-6-1:2005/A1:2010 | FIRE HAZARD TESTING - PART 6-1: SMOKE OBSCURATION - GENERAL GUIDANCE |
| NF EN 50268-1 : 2000 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS - PART 1: APPARATUS |
| EN 60695-9-2:2014 | Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevance of test methods |
| UNE-EN 60695-8-2:2017 | Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods |
| EN 60695-1-10:2017 | Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines |
| EN 50267-1:1998 | Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 1: Apparatus |
| EN 50265-2-2:1998 | Common test methods for cables under fire conditions - Test for resistance to vertical flame propagation for a single insulated conductor or cable - Part 2-2: Procedures - Diffusion flame |
| EN 60332-1-3:2004/A1:2015 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-3: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - PROCEDURE FOR DETERMINATION OF FLAMING DROPLETS/PARTICLES (IEC 60332-1-3:2004/A1:2015) |
| EN 60332-3-21:2009 | Tests on electric and optical fibre cables under fire conditions - Part 3-21: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A F/R |
| EN 60332-3-22:2009 | Tests on electric and optical fibre cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A |
| EN 60695-1-11:2015 | Fire hazard testing - Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessment |
| EN 60695-8-2:2017 | Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods |
| EN 60695-1-30:2017 | Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process - General guidelines |
| EN 60695-1-1:2000 | Fire hazard testing - Part 1-1: Guidance for assessing the fire hazard of electrotechnical products - General guidelines |
| EN 60332-2-2:2004 | Tests on electric and optical fibre cables under fire conditions - Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame |
| EN 50267-2-1:1998 | Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-1: Procedures - Determination of the amount of halogen acid gas |
| EN 50266-1:2001 | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 1: Apparatus |
| EN 50289-4-12:2004 | Communication cables - Specifications for test methods - Part 4-12: Environmental test methods - Vertical flame spread test on bunched small communication cables |
| EN 60695-1-21:2016 | Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods |
| CLC/TS 45545-5:2009 | Railway applications - Fire protection on railway vehicles - Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles |
| EN 50268-2:1999 | Common test methods for cables under fire conditions - Measurement of smoke density of cables burning under defined conditions - Part 2: Procedure |
| EN 50267-2-2:1998 | Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-2: Procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity |
| EN 50267-2-3:1998 | Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-3: Procedures - Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity |
| I.S. EN 60332-1-1:2004 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-1: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - APPARATUS |
| BS EN 60695-1-1:2000 | Fire hazard testing. Guidance for assessing fire hazard of electrotechnical products General guidelines |
| BS EN 60332-1-2 : 2004 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-2: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - PROCEDURE FOR 1 KW PRE-MIXED FLAME (IEC 60332-1-2:2004) |
| BS EN 60695-11-10:2013 | Fire hazard testing Test flames. 50 W horizontal and vertical flame test methods |
| DIN EN 50267-2-3 : 1999 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - TESTS ON GASES EVOLVED DURING COMBUSTION OF MATERIAL FROM CABLES - PART 2-3: PROCEDURES - DETERMINATION OF DEGREE OF ACIDITY OF GASES FOR CABLES BY DETERMINATION OF THE WEIGHTED AVERAGE OF PH AND CONDUCTIVITY |
| BS EN 60695-9-1:2013 | Fire hazard testing Surface spread of flame. General guidance |
| CEI EN 60332-3-25 : 2010 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 3-25: TEST FOR VERTICAL FLAME SPREAD OF VERTICALLY-MOUNTED BUNCHED WIRES OR CABLES - CATEGORY D |
| CEI EN 60695-11-5 : 2006 | FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE |
| BS EN 60332-1-1 : 2004 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-1: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - APPARATUS |
| BS EN 50289-4-11:2002 | Communication cables. Specifications for test methods. Environmental test methods A horizontal integrated fire test method |
| BS EN 60332-2-2:2004 | Tests on electric and optical fibre cables under fire conditions Tests for vertical flame propagation for a single small insulated wire or cable. Procedure for diffusion flame |
| BS EN 50289-4-12:2004 | Communication cables. Specifications for test methods Environmental test methods - Vertical flame spread test on bunched small communication cables |
| BS EN 50268-1:2000 | Common test methods for cables under fire conditions. Measurement of smoke density of cables burning under defined conditions Apparatus |
| CEI EN 60332-3-24 : 2010 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 3-24: TEST FOR VERTICAL FLAME SPREAD OF VERTICALLY-MOUNTED BUNCHED WIRES OR CABLES - CATEGORY C |
| VDE 0482-268-1 : 2000 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS - PART 1: APPARATUS |
| I.S. EN 60695-8-2:2017 | FIRE HAZARD TESTING - PART 8-2: HEAT RELEASE - SUMMARY AND RELEVANCE OF TEST METHODS |
| UNE-EN 60332-2-1:2005 | Tests on electric and optical fibre cables under fire conditions -- Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus |
| CEI EN 60695-1-10 : 2012 | FIRE HAZARD TESTING - PART 1-10: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - GENERAL GUIDELINES |
| BS EN 60695-6-1 : 2005 | FIRE HAZARD TESTING - PART 6-1: SMOKE OBSCURATION - GENERAL GUIDANCE |
| I.S. EN 50266-1:2001 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - TEST FOR VERTICAL FLAME SPREAD OF VERTICALLY-MOUNTED BUNCHED WIRES OR CABLES - PART 1: APPARATUS |
| UNE-EN 60332-2-2:2005 | Tests on electric and optical fibre cables under fire conditions -- Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame |
| I.S. EN 60695-10-3:2016 | FIRE HAZARD TESTING - PART 10-3: ABNORMAL HEAT - MOULD STRESS RELIEF DISTORTION TEST |
| I.S. EN 50268-1:1999 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS - PART 1 - APPARATUS |
| BS EN 50266-1:2001 | Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables Apparatus |
| I.S. EN 60695-1-11:2015 | FIRE HAZARD TESTING - PART 1-11: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - FIRE HAZARD ASSESSMENT |
| I.S. EN 50266-2-2:2001 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - TEST FOR VERTICAL FLAME SPREAD OF VERTICALLY- MOUNTED BUNCHED WIRES OR CABLES - PART 2-2: PROCEDURES - CATEGORY A |
| I.S. EN 60695-9-2:2014 | FIRE HAZARD TESTING - PART 9-2: SURFACE SPREAD OF FLAME - SUMMARY AND RELEVANCE OF TEST METHODS |
| EN 60332-1-2:2004/A11:2016 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-2: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - PROCEDURE FOR 1 KW PRE-MIXED FLAME (IEC 60332-1-2:2004/A1:2015) |
| DIN EN 50268-2 : 2000 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS - PART 2: PROCEDURE |
| VDE 0482-265-2-2 : 1999 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS TEST FOR RESISTANCE TO VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED CONDUCTOR OR CABLE - PART 2-2: PROCEDURES - DIFFUSION FLAME |
| VDE 0482-266-2-1 : 2001 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - TEST FOR VERTICAL FLAME SPREAD OF VERTICALLY-MOUNTED BUNCHED WIRES OR CABLES - PART 2-1: PROCEDURES - CATEGORY A F/R |
| DIN EN 50268-1 : 2000 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS - PART 1: APPARATUS |
| VDE 0482-265-1 : 1999 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - TEST FOR RESISTANCE TO VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED CONDUCTOR OR CABLE - PART 1: APPARATUS |
| CEI EN 50362 : 2003 | METHOD OF TEST FOR RESISTANCE TO FIRE OF LARGER UNPROTECTED POWER AND CONTROL CABLES FOR USE IN EMERGENCY CIRCUITS |
| BS EN 60332-3-23:2009 | Tests on electric and optical fibre cables under fire conditions Test for vertical flame spread of vertically-mounted bunched wires or cables. Category B |
| BS EN 50265-1:1999 | Common test methods for cables under fire conditions. Test for resistance to vertical flame propagation for a single insulated conductor or cable Apparatus |
| UNE-EN 60695-1-30:2017 | Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process - General guidelines |
| BS EN 60695-1-20:2016 | Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Ignitability. General guidance |
| BS EN 60695-1-11:2015 | Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Fire hazard assessment |
| UNE-EN 60695-10-3:2017 | Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test |
| BS EN 50267-2-1:1999 | Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables. Procedures Determination of the amount of halogen acid gas - Determination of the amount of halogen acid gas |
| BS EN 60127-7:2016 | Miniature fuses Miniature fuse-links for special applications |
| CEI EN 60695-8-1 : 2009 | FIRE HAZARD TESTING - PART 8-1: HEAT RELEASE - GENERAL GUIDANCE |
| DIN EN 50265-2-1 : 1999 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - TEST FOR RESISTANCE TO VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED CONDUCTOR OR CABLE - PART 2-1: PROCEDURES - 1 KW PRE-MIXED FLAME |
| BS EN 50265-2-2:1999 | Common test methods for cables under fire conditions. Test for resistance to vertical flame propagation for a single insulated conductor or cable. Procedures Diffusion flame - Diffusion flame |
| BS EN 50266-2-2:2001 | Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Procedures Category A |
| UNE-EN 60695-8-1:2017 | Fire hazard testing - Part 8-1: Heat release - General guidance |
| BS EN 60695-10-3:2016 | Fire hazard testing Abnormal heat. Mould stress relief distortion test |
| UNE-EN 60332-1-1:2005 | Tests on electric and optical fibre cables under fire conditions -- Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus |
| VDE 0482-267-1 : 1999 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - TESTS ON GASES EVOLVED DURING COMBUSTION OF MATERIALS FROM CABLES - PART 1: APPARATUS |
| BS EN 60332-3-25:2009 | Tests on electric and optical fibre cables under fire conditions Test for vertical flame spread of vertically-mounted bunched wires or cables. Category D |
| VDE 0482-267-2-3 : 1999 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - TESTS AN GASES EVOLVED DURING COMBUSTION OF MATERIALS FROM CABLES - PART 2-3: PROCEDURES - DETERMINATION OF DEGREE OF ACIDITY OF GASES FOR CABLES BY DETERMINATION OF THE WEIGHTED AVERAGE OF PH AND CONDUCTIVITY |
| I.S. EN 60332-3-25:2009 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 3-25: TEST FOR VERTICAL FLAME SPREAD OF VERTICALLY-MOUNTED BUNCHED WIRES OR CABLES - CATEGORY D |
| I.S. EN 50267-2-2:1999 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - TESTS ON GASES EVOLVED DURING COMBUSTION OF MATERIALS FROM CABLES - PART 2-2: PROCEDURES - DETERMINATION OF DEGREE OF ACIDITY OF GASES FOR MATERIALS BY MEASURING PH AND CONDUCTIVITY |
| I.S. EN 60695-1-40:2014 | FIRE HAZARD TESTING - PART 1-40: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - INSULATING LIQUIDS |
| I.S. EN 60695-6-1:2005 | FIRE HAZARD TESTING - PART 6-1: SMOKE OBSCURATION - GENERAL GUIDANCE |
| I.S. EN 60695-11-10:2013 | FIRE HAZARD TESTING - PART 11-10: TEST FLAMES - 50 W HORIZONTAL AND VERTICAL FLAME TEST METHODS (IEC 60695-11-10:2013 (EQV)) |
| CEI EN 60332-2-1 : 2006 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 2-1: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE SMALL INSULATED WIRE OR CABLE - APPARATUS |
| CEI EN 60695-10-3 : 2004 | FIRE HAZARD TESTING - PART 10-3: ABNORMAL HEAT - MOULD STRESS RELIEF DISTORTION TEST |
| NF EN 50267-2-3 : 2000 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - TEST ON GAS EVOLVED DURING COMBUSTION OF MATERIALS FROM CABLES - PART 2-3: PROCEDURES - DETERMINATION OF DEGREE OF ACIDITY OF GASES FOR CABLES BY DETERMINATION OF THE WEIGHTED AVERAGE OF PH AND CONDUCTIVITY |
| BS EN 60695-1-21:2016 | Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Ignitability. Summary and relevance of test methods |
| UNE-EN 60695-9-2:2014 | Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevance of test methods |
| UNE-EN 60332-1-2:2005 | Tests on electric and optical fibre cables under fire conditions -- Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame |
| EN 60332-3-24 : 2009 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 3-24: TEST FOR VERTICAL FLAME SPREAD OF VERTICALLY-MOUNTED BUNCHED WIRES OR CABLES - CATEGORY C |
| EN 50266-2-3 : 2001 COR 2002 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - TEST FOR VERTICAL FLAME SPREAD OF VERTICALLY- MOUNTED BUNCHED WIRES OR CABLES - PART 2-3: PROCEDURES - CATEGORY B |
| EN 50266-2-4 : 2001 COR 2002 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - TEST FOR VERTICAL FLAME SPREAD OF VERTICALLY- MOUNTED BUNCHED WIRES OR CABLES - PART 2-4: PROCEDURES - CATEGORY C |
| EN 50266-2-1 : 2001 COR 2002 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - TEST FOR VERTICAL FLAME SPREAD OF VERTICALLY- MOUNTED BUNCHED WIRES OR CABLES - PART 2-1: PROCEDURES - CATEGORY A F/R |
| CLC/TS 45545-5:2009 | Railway applications - Fire protection on railway vehicles - Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles |
| EN 50362:2003 | Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits |
| BS EN 60695-8-1:2017 | Fire hazard testing Heat release. General guidance |
| I.S. EN 60695-11-5:2017 | FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE |
| UNE-EN 60695-1-40:2014 | Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids |
| 09/30198671 DC : DRAFT JAN 2009 | BS EN 60332-3-25 - TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 3-25: TEST FOR VERTICAL FLAME SPREAD OF VERTICALLY-MOUNTED BUNCHED WIRES OR CABLES - CATEGORY D |
| DIN EN 50265-1 : 1999 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - TEST FOR RESISTANCE TO VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED CONDUCTOR OR CABLE - PART 1: APPARATUS |
| 12/30261347 DC : 0 | BS EN 50582 - METHOD OF TEST FOR RESISTANCE TO FIRE OF UNPROTECTED OPTICAL FIBRE CABLES FOR USE IN EMERGENCY CIRCUITS (DIAMETER LESS THAN OR EQUAL TO 20 MM) |
| BS EN 60332-3-22:2009 | Tests on electric and optical fibre cables under fire conditions Test for vertical flame spread of vertically-mounted bunched wires or cables. Category A |
| BS EN 50266-2-3:2001 | Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Procedures Category B |
| BS EN 60332-1-3 : 2004 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-3: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - PROCEDURE FOR DETERMINATION OF FLAMING DROPLETS/PARTICLES |
| PREN 50200 : DRAFT 2013 | METHOD OF TEST FOR RESISTANCE TO FIRE OF UNPROTECTED SMALL CABLES FOR USE IN EMERGENCY CIRCUITS |
| BS EN 50267-2-2:1999 | Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables. Procedures Determination of degree of acidity of gases for materials by measuring pH and conductivity - Determination of degree of acidity of gases for materials by measuring pH and conductivity |
| BS EN 50200:2015 | Method of test for resistance to fire of unprotected small cables for use in emergency circuits |
| CEI 20-22/0 : 2006 | TEST ON ELECTRIC CABLES UNDER FIRE CONDITIONS - PART 0: TEST OF NO PROPAGATION OF FIRE - GENERAL PRINCIPLES |
| BS EN 50268-2:2000 | Common test methods for cables under fire conditions. Measurement of smoke density of cables burning under defined conditions Procedure |
| 03/304030 DC : DRAFT MAR 2003 | EN 50289-4-12 - TEST METHODS COMMON TO CABLES SUBJECT TO FIRE - TESTING VERTICAL FLAME SPREAD ON BUNCHED WIRES FOR SMALL COMMUNICATION CABLES |
| CEI EN 60332-3-10 : 2010 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 3-10: TEST FOR VERTICAL FLAME SPREAD OF VERTICALLY-MOUNTED BUNCHED WIRES OR CABLES - APPARATUS |
| UNI CEI CLC/TS 45545-5 : 2009 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 5: FIRE SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT INCLUDING THAT OF TROLLEY BUSES, TRACK GUIDED BUSES AND MAGNETIC LEVITATION VEHICLES |
| 98/542447 DC : DRAFT JULY 1998 | PREN 45545-5 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 5: FIRE SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT INCLUDING THAT OF TROLLEY BUSES, TRACK GUIDED BUSES AND MAGNETIC LEVITATION VEHICLES |
| BS EN 60695-11-20:2015 | Fire hazard testing Test flames. 500 W flame test methods |
| BS EN 60332-3-24:2009 | Tests on electric and optical fibre cables under fire conditions Test for vertical flame spread of vertically-mounted bunched wires or cables. Category C |
| BS EN 50265-2-1:1999 | Common test methods for cables under fire conditions. Test for resistance to vertical flame propagation for a single insulated conductor or cable. Procedures 1 kW pre-mixed flame - 1 kW pre-mixed flame |
| I.S. EN 50362:2003 | METHOD OF TEST FOR RESISTANCE TO FIRE OF LARGER UNPROTECTED POWER AND CONTROL CABLES FOR USE IN EMERGENCY CIRCUITS |
| I.S. EN 60695-1-10:2017 | FIRE HAZARD TESTING - PART 1-10: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - GENERAL GUIDELINES |
| I.S. EN 60695-1-20:2016 | FIRE HAZARD TESTING - PART 1-20: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - GENERAL GUIDANCE |
| I.S. EN 60695-8-1:2017 | FIRE HAZARD TESTING - PART 8-1: HEAT RELEASE - GENERAL GUIDANCE |
| BS EN 60695-1-30:2017 | Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process. General guidelines |
| CEI EN 60332-3-23 : 2010 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 3-23: TEST FOR VERTICAL FLAME SPREAD OF VERTICALLY-MOUNTED BUNCHED WIRES OR CABLES - CATEGORY B |
| I.S. EN 50289-4-11:2002 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 4-11: ENVIRONMENTAL TEST METHODS - A HORIZONTAL INTEGRATED FIRE TEST METHOD |
| I.S. EN 50267-2-1:1999 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - TESTS ON GASES EVOLVED DURING COMBUSTION OF MATERIALS FROM CABLES - PART 2-1: PROCEDURES - DETERMINATION OF THE AMOUNT OF HALOGEN ACID GAS |
| BS EN 60695-9-2:2014 | Fire hazard testing Surface spread of flame. Summary and relevance of test methods |
| BS EN 60695-8-2:2017 | Fire hazard testing Heat release. Summary and relevance of test methods |
| IEC 60695-1-10:2016 | Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines |
| UNE-EN 60695-11-20:2016 | Fire hazard testing - Part 11-20: Test flames - 500 W flame test methods |
| UNE-EN 60695-11-10:2014 | Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
| EN 60332-3-23 : 2009 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 3-23: TEST FOR VERTICAL FLAME SPREAD OF VERTICALLY-MOUNTED BUNCHED WIRES OR CABLES - CATEGORY B |
| I.S. EN 50266-2-3:2001 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - TEST FOR VERTICAL FLAME SPREAD OF VERTICALLY- MOUNTED BUNCHED WIRES OR CABLES - PART 2-3: PROCEDURES - CATEGORY B |
| CEI EN 60332-3-21 : 2010 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 3-21: TEST FOR VERTICAL FLAME SPREAD OF VERTICALLY-MOUNTED BUNCHED WIRES OR CABLES - CATEGORY A F/R |
| I.S. EN 60127-7:2016 | MINIATURE FUSES - PART 7: MINIATURE FUSE-LINKS FOR SPECIAL APPLICATIONS |
| UNE-EN 60695-1-10:2017 | Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines |
| 13/30282376 DC : 0 | BS EN 50200 - METHOD OF TEST FOR RESISTANCE TO FIRE OF UNPROTECTED SMALL CABLES FOR USE IN EMERGENCY CIRCUITS |
| BS EN 50267-2-3:1999 | Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables. Procedures Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity - Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity |
| I.S. EN 60695-1-21:2016 | FIRE HAZARD TESTING - PART 1-21: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - SUMMARY AND RELEVANCE OF TEST METHODS |
| CEI EN 60332-3-22 : 2010 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 3-22: TEST FOR VERTICAL FLAME SPREAD OF VERTICALLY-MOUNTED BUNCHED WIRES OR CABLES - CATEGORY A |
| BS EN 50266-2-4:2001 | Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Procedures Category C |
| S.R. CLC/TS 45545-5:2009 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 5: FIRE SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT INCLUDING THAT OF TROLLEY BUSES, TRACK GUIDED BUSES AND MAGNETIC LEVITATION VEHICLES |
| UNE-EN 50289-4-12:2010 | Communication cables - Specifications for test methods -- Part 4-12: Environmental test methods - Vertical flame spread test on bunched small communication cables |
| BS EN 60695-2-11:2014 | Fire hazard testing Glowing/hot-wire based test methods. Glow-wire flammability test method for end-products (GWEPT) |
| DIN EN 50267-2-1 : 1999 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - TESTS ON GASES EVOLVED DURING COMBUSTION OF MATERIAL FROM CABLES - PART 2-1: PROCEDURES - DETERMINATION OF THE AMOUNT OF HALOGEN ACID GAS |
| BS EN 60332-3-21:2009 | Tests on electric and optical fibre cables under fire conditions Test for vertical flame spread of vertically-mounted bunched wires or cables. Category A F/R |
| UNE-EN 60695-1-11:2016 | Fire hazard testing - Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessment |
| BS EN 60695-11-5:2017 | Fire hazard testing Test flames. Needle-flame test method. Apparatus, confirmatory test arrangement and guidance |
| I.S. EN 60332-3-10:2009 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 3-10: TEST FOR VERTICAL FLAME SPREAD OF VERTICALLY-MOUNTED BUNCHED WIRES OR CABLES - APPARATUS |
| BS EN 60332-2-1:2004 | Tests on electric and optical fibre cables under fire conditions Test for vertical flame propagation for a single small insulated wire or cable. Apparatus |
| VDE 0482-268-2 : 2000 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS - PART 2: PROCEDURE |
| CEI EN 60695-8-2 : 2ED 2017 | FIRE HAZARD TESTING - PART 8-2: HEAT RELEASE - SUMMARY AND RELEVANCE OF TEST METHODS |
| I.S. EN 50266-2-4:2001 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - TEST FOR VERTICAL FLAME SPREAD OF VERTICALLY- MOUNTED BUNCHED WIRES OR CABLES - PART 2-4: PROCEDURES - CATEGORY C |
| EN 60695-11-5:2017 | Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance |
| I.S. EN 60332-3-21:2009 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 3-21: TEST FOR VERTICAL FLAME SPREAD OF VERTICALLY-MOUNTED BUNCHED WIRES OR CABLES - CATEGORY A F/R |
| CEI EN 60695-1-40 : 2014 | FIRE HAZARD TESTING - PART 1-40: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - INSULATING LIQUIDS |
| I.S. EN 60332-3-23:2009 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 3-23: TEST FOR VERTICAL FLAME SPREAD OF VERTICALLY-MOUNTED BUNCHED WIRES OR CABLES - CATEGORY B |
| VDE 0482-267-2-2 : 1999 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - TESTS AN GASES EVOLVED DURING COMBUSTION OF MATERIALS FROM CABLES - PART 2-2: PROCEDURES - DETERMINATION OF DEGREE OF ACIDITY OF GASES FOR MATERIALS BY MEASURING PH AND CONDUCTIVITY |
| I.S. EN 60695-9-1:2013 | FIRE HAZARD TESTING - PART 9-1: SURFACE SPREAD OF FLAME - GENERAL GUIDANCE (IEC 60695-9-1:2013 (EQV)) |
| BS EN 50362:2003 | Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits |
| I.S. EN 50267-1:1999 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - TESTS ON GASES EVOLVED DURING COMBUSTION OF MATERIALS FROM CABLES - PART 1: APPARATUS |
| I.S. EN 60332-3-24:2009 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 3-24: TEST FOR VERTICAL FLAME SPREAD OF VERTICALLY-MOUNTED BUNCHED WIRES OR CABLES - CATEGORY C |
| I.S. EN 50289-4-12:2005 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 4-12: ENVIRONMENTAL TEST METHODS - VERTICAL FLAME SPREAD TEST ON BUNCHED SMALL COMMUNICATION CABLES |
| I.S. EN 60332-3-22:2009 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 3-22: TEST FOR VERTICAL FLAME SPREAD OF VERTICALLY-MOUNTED BUNCHED WIRES OR CABLES - CATEGORY A |
| I.S. EN 50267-2-3:1999 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - TESTS ON GASES EVOLVED DURING COMBUSTION OF MATERIALS FROM CABLES - PART 2-3: PROCEDURE - DETERMINATION OF DEGREE OF ACIDITY OF GASES FOR CABLES BY DETERMINATION OF THE WEIGHTED AVERAGE OF PH AND CONDUCTIVITY |
| I.S. EN 60695-1-30:2017 | FIRE HAZARD TESTING - PART 1-30: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - PRESELECTION TESTING PROCESS - GENERAL GUIDELINES |
| UNE-EN 60695-1-21:2017 | Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods |
| EN 60332-3-25:2009 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 3-25: TEST FOR VERTICAL FLAME SPREAD OF VERTICALLY-MOUNTED BUNCHED WIRES OR CABLES - CATEGORY D |
| EN 50268-1:1999 | Common test methods for cables under fire conditions - Measurement of smoke density of cables burning under defined conditions - Part 1: Apparatus |
| EN 50289-4-11:2002 | Communication cables - Specifications for test methods - Part 4-11: Environmental test methods - A horizontal integrated fire test method |
| EN 50265-2-1:1998 | Common test methods for cables under fire conditions - Test for resistance to vertical flame propagation for a single insulated conductor or cable - Part 2-1: Procedures - 1 kW pre-mixed flame |
| EN 50266-2-2 : 2001 COR 2002 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - TEST FOR VERTICAL FLAME SPREAD OF VERTICALLY- MOUNTED BUNCHED WIRES OR CABLES - PART 2-2: PROCEDURES - CATEGORY A |
| EN 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014) |
| EN 60127-7:2016 | Miniature fuses - Part 7: Miniature fuse-links for special applications |
| EN 50265-1:1998 | Common test methods for cables under fire conditions - Test for resistance to vertical flame propagation for a single insulated conductor or cable - Part 1: Apparatus |
| EN 50266-2-5 : 2001 COR 2002 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - TEST FOR VERTICAL FLAME SPREAD OF VERTICALLY- MOUNTED BUNCHED WIRES OR CABLES - PART 2-5: PROCEDURES - SMALL CABLES - CATEGORY D |
| EN 60695-1-40:2014 | Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids |
| EN 60332-3-10:2009 | Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus |
| EN 60332-2-1:2004 | Tests on electric and optical fibre cables under fire conditions - Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus |
| EN 60332-1-1:2004/A1:2015 | Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus |
| EN 60695-1-20 : 2016 | Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance |
| EN 60695-10-3:2016 | Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test |
| EN 60695-8-1:2017 | Fire hazard testing - Part 8-1: Heat release - General guidance |
| EN 60695-9-1:2013 | FIRE HAZARD TESTING - PART 9-1: SURFACE SPREAD OF FLAME - GENERAL GUIDANCE (IEC 60695-9-1:2013) |
| EN 50200:2015 | Method of test for resistance to fire of unprotected small cables for use in emergency circuits |
| ISO 13943:2017 | Fire safety — Vocabulary |
| ISO/IEC Guide 51:2014 | Safety aspects Guidelines for their inclusion in standards |
| IEC GUIDE 104:2010 | The preparation of safety publications and the use of basic safety publications and group safety publications |
| EN ISO 13943:2017 | Fire safety - Vocabulary (ISO 13943:2017) |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.