EN 60742:1995
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
11-01-1997
06-13-1995
General plan of the Standard
Chapter 1: General requirements
1 Scope and object
2 Definitions
3 General requirement
4 General notes on tests
5 Rating
6 Classification
7 Marking
8 Protection against electric shock
9 Change of input voltage setting
10 Output voltage and output current under load
11 No-load output voltage
12 Short-circuit voltage
13 Heating
14 Short-circuit and overload protection
15 Mechanical strength
16 Protection against harmful ingress of water and
moisture
17 Insulation resistance and electric strength
18 Construction
19 Components
20 Internal wiring
21 Supply connection and external flexible cables and
cords
22 Terminals for external conductors
23 Provision for protective earthing
24 Screws and connections
25 Creepage distances, clearances and distances through
insulation
26 Resistance to heat, abnormal heat, fire and tracking
27 Resistance to rusting
Appendix A
Appendix IA Production tests
Appendix IA Examples to be used as guide for sub-clause 8.6
Appendix IC Examples of points of application of test
voltages
Appendix ID Measurement of creepage distances and
clearances
Appendix IE Examples of points of measurement of creepage
distances and clearances
Chapter II: Supplementary requirements for isolating
transformers
Section one - Isolating transformers for general use,
shaver transformers and shaver supply units
2 Definitions
5 Rating
7 Marking
8 Protection against electric shock
11 No-load output voltage
13 Heating
14 Short-circuit and overload protection
15 Mechanical strength
18 Construction
19 Components
21 Supply connection and external flexible cables and
cords
22 Terminals for external conductors
23 Provision for earthing
Appendix II-I-A Requirements for special socket-outlets
for shaver supply units
Chapter III: Supplementary requirements for safety
isolating transformers
Section one - Safety isolating transformers for general
use
5 Rating
7 Marking
8 Protection against electric shock
11 No-load output voltage
21 Supply connection and external flexible cables and
cords
Section two - Transformers for toys
2 Definitions
4 General notes on tests
5 Rating
7 Marking
8 Protection against electric shock
9 Change of input voltage setting
10 Output voltage and output current under load
11 No-load output voltage
12 Short-circuit voltage
14 Short-circuit and overload protection
15 Mechanical strength
18 Construction
19 Components
21 Supply connection and external flexible cables
and cords
Section three - Bell transformers
2 Definitions
4 General notes on tests
5 Rating
6 Classification
7 Marking
8 Protection against electric shock
10 Output voltage and output current under load
11 No-load output voltage
13 Heating
14 Short-circuit and overload protection
15 Mechanical strength
18 Construction
19 Components
21 Supply connection and external flexible cables and
cords
22 Terminals for external conductors
23 Provision for earthing
Appendix II-I-A Requirements for special socket-outlets
for shaver supply units
Chapter III: Supplementary requirements for safety
isolating transformers
Section one - Safety isolating transformers for general
use
5 Rating
7 Marking
8 Protection against electric shock
11 No-load output voltage
21 Supply connection and external flexible cables and
cords
Section two - Transformers for toys
2 Definitions
4 General notes on tests
5 Rating
7 Marking
8 Protection against electric shock
9 Change of input voltage setting
10 Output voltage and output current under load
11 No-load output voltage
12 Short-circuit voltage
14 Short-circuit and overload protection
15 Mechanical strength
18 Construction
19 Components
21 Supply connection and external flexible cables and
cords
Section three - Bell transformers
2 Definitions
4 General notes on tests
5 Rating
6 Classification
7 Marking
8 Protection against electric shock
10 Output voltage and output current under load
11 No-load output voltage
13 Heating
14 Short-circuit and overload protection
15 Mechanical strength
18 Construction
19 Components
21 Supply connection and external flexible cables and
cords
22 Terminals for external conductors
24 Screws and connections
Section four - Transformers for class III handlamps
2 Definitions
5 Rating
7 Marking
8 Protection against electric shock
10 Output voltage and output current under load
11 No-load output voltage
18 Construction
21 Supply connection and external flexible cables and
cords
Figures
Annex ZA (normative) Testing of a series of transformers
Annex ZB (normative) Other international publications
quoted in this standard with the references of the
relevant European publications
Annex ZC (normative) Special national conditions
Applies to stationary or portable, single-phase or polyphase, air-cooled isolating and safety isolating transformers, associated or otherwise, having a rated supply voltage not exceeding 1000 V alternating current and 1000 V unsmoothed direct current and rated frequency not exceeding 500 Hz. Has the status of a group safety publication in accordance with IEC Guide 104.
| Committee |
CLC/SR 96
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NF EN 60742 : 1997 | Identical |
| NBN EN 60742 : 1996 | Identical |
| NBN C 52 742 : 1989 | Identical |
| NEN 10742 : 1995 | Identical |
| NEN EN 60742 : LATEST | Identical |
| I.S. EN 60742:1996 | Identical |
| SN EN 60742 : 1995 | Identical |
| VDE 0551 : 1995 | Identical |
| VDE 0551-1 : 1989 | Identical |
| UNE-EN 60742:1996 | Identical |
| BS 3535-1:1990 | Identical |
| BS EN 60742:1996 | Identical |
| CEI EN 60742 : 3ED 1995 | Identical |
| DIN EN 60742 : 1995 | Identical |
| DIN VDE 0551-1 : 1989 | Corresponds |
| BS 3535-1(1996) : 1996 | Identical |
| ENV 50232 : 1997 | AVIATION GROUND LIGHTING ELECTRICAL INSTALLATION - ISOLATING TRANSFORMER: EQUIPMENT SPECIFICATIONS AND TESTS |
| BS EN 81-31:2010 | Safety rules for the construction and installation of lifts. Lifts for the transport of goods only Accessible goods only lifts |
| DIN EN 60924 : 1994 | D.C. SUPPLIED ELECTRONIC BALLASTS FOR TUBULAR FLUORESCENT LAMPS - GENERAL AND SAFETY REQUIREMENTS |
| BS EN 60967 : 91 AMD 10156 | SAFETY OF ELECTRICALLY HEATED BLANKETS, PADS AND SIMILAR FLEXIBLE HEATING APPLIANCES FOR HOUSEHOLD USE |
| 11/30251720 DC : 0 | BS EN 81-50 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATIONS AND TESTS - PART 50: DESIGN RULES, CALCULATIONS, EXAMINATIONS AND TESTS OF LIFT COMPONENTS |
| 05/30130669 DC : DRAFT MAR 2005 | BS EN 15165 - FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| 04/30111616 DC : 0 | EN 81-40 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIRLIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY |
| DIN EN 81-31:2010-08 | Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts |
| DIN EN 12953-9:2007-09 | Shell boilers - Part 9: Requirements for limiting devices of the boiler and accessories |
| BS EN 12414:1999 | Vehicle parking control equipment. Pay and display ticket machine. Technical and functional requirements |
| EN 12669:2000 | DIRECT GAS-FIRED HOT AIR BLOWERS FOR USE IN GREENHOUSES AND SUPPLEMENTARY NON-DOMESTIC SPACE HEATING |
| DIN EN 81-2:2000-05 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
| HD 384.4.41 S2:1996/A1:2002 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 4: PROTECTION FOR SAFETY - CHAPTER 41: PROTECTION AGAINST ELECTRIC SHOCK |
| EN 12952-11:2007 | Water-tube boilers and auxiliary installations - Part 11: Requirements for limiting devices of the boiler and accessories |
| I.S. EN 60598-2-6:1995 | LUMINAIRES - PART 2: PARTICULAR REQUIREMENTS - SECTION 6: LUMINAIRES WITH BUILT-IN TRANSFORMERS OR CONVERTERS FOR FILAMENT LAMPS |
| I.S. EN 483:2000 | GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW |
| DIN VDE 0711-222 : 1992 | LUMINAIRES - PART 2: PARTICULAR REQUIREMENTS; SECTION TWENTY-TWO; LUMINAIRES FOR EMERGENCY LIGHTING |
| I.S. EN 12696:2000 | CATHODIC PROTECTION OF STEEL IN CONCRETE |
| 12/30254956 DC : 0 | BS EN 26 - GAS-FIRED INSTANTANEOUS WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER |
| BS 4533-102.10:1990 | Luminaires. Particular requirements Specification for portable child-appealing luminaires |
| PREN 81-50 : DRAFT 2011 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATIONS AND TESTS - PART 50: DESIGN RULES, CALCULATIONS, EXAMINATIONS AND TESTS OF LIFT COMPONENTS |
| ENV 50234 : DRAFT 1997 | AVIATION GROUND LIGHTING ELECTRICAL INSTALLATION - FLASHING LIGHTS: EQUIPMENT SPECIFICATIONS AND TESTS |
| 93/210506 DC : DRAFT AUG 1993 | EN 50156 ELECTRICAL EQUIPMENT FOR FURNACES - PART 1 RULES FOR INSTALLATION (PREN 50156-1) |
| PREN 12952-11 : DRAFT 99 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - REQUIREMENTS FOR LIMITING DEVICES AND SAFETY CIRCUITS OF THE BOILER AND ACCESSORIES |
| NF EN 50088 : 96 AMD 4 2006 | SAFETY OF ELECTRIC TOYS |
| DIN EN 12957:2009-07 | MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES |
| I.S. EN 12669:2000 | DIRECT GAS-FIRED HOT AIR BLOWERS FOR USE IN GREENHOUSES AND SUPPLEMENTARY NON-DOMESTIC SPACE HEATING |
| DIN EN 13636:2004-10 | Cathodic protection of buried metallic tanks and related piping; German version EN 13636:2004 |
| I.S. EN 81-1:1999 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS |
| DIN EN 12957:2001-12 | MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES |
| I.S. EN 81-3:2000 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 3: ELECTRIC AND HYDRAULIC SERVICE LIFTS |
| I.S. EN 81-2:1999 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
| VDE 0711-222 : 1992 | LUMINAIRES - PART 2: PARTICULAR REQUIREMENTS; SECTION TWENTY-TWO; LUMINAIRES FOR EMERGENCY LIGHTING |
| VDE 0129-507 : 2001 | ELECTRICAL INSTALLATIONS IN SHIPS - PART 507: PLEASURE CRAFT (IEC 60092-507:2000) |
| VDE 0711-223 : 1997 | LUMINAIRES - PART 2: PARTICULAR REQUIREMENTS - SECTION 23: EXTRA LOW-VOLTAGE LIGHTING SYSTEMS FOR FILAMENT LAMPS |
| VDE V 0161-234 : 1998 | Aviation ground lighting electric installation - Flashing lights Equipment specifications and tests; |
| DIN EN 60598-2-6 : 95 AMD 1 97 | LUMINAIRES - PART 2: PARTICULAR REQUIREMENTS; SECTION 6: LUMINAIRES WITH BUILT-IN TRANSFORMERS FOR FILAMENT LAMPS |
| VDE 0711-206 : 95 AMD 1 97 | LUMINAIRES - PART 2: PARTICULAR REQUIREMENTS; SECTION 6: LUMINAIRES WITH BUILT-IN TRANSFORMERS FOR FILAMENT LAMPS |
| DIN V ENV 50234 : 1998 | AERONAUTICAL GROUND LIGHTING ELECTRICAL INSTALLATION - FLASHING LIGHTS - EQUIPMENT SPECIFICATIONS AND TESTS |
| 00/705373 DC : DRAFT FEB 2000 | PREN 13836 - GAS-FIRED CENTRAL HEATING BOILERS - TYPE B BOILERS OF NOMINAL HEAT INPUT EXCEEDING 300 KW BUT NOT EXCEEDING 1000 KW |
| I.S. EN 297:1994 | GAS FIRED CENTRAL HEATING BOILERS - TYPE B11 AND B11BS BOILERS FITTED WITH ATMOSPHERIC BURNERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW |
| 11/30248021 DC : 0 | AEROSPACE SERIES - COPPER ALLOY CUBE 1.9 - SOLUTION TREATED, COLD WORKED TO [1/2] HARD AND PRECIPITATION TREATED - BAR - 5 MM <= A OR D <= 190 MM - R[M] >= 1220 MPA |
| I.S. EN 115:1995 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF ESCALATORS AND PASSENGER CONVEYORS |
| DIN V VDE V 0829-240 : 1997 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 240: TECHNICAL REPORT: GUIDELINES FOR THE PROFESSIONAL INSTALLATION OF TWISTED PAIR (TP) CABLES CLASS 1 |
| BS 3456-201:1990 | Specification for safety of household and similar electrical appliances General requirements |
| PD 6580-2:1995 | Home and building electronic systems. Technical report 1 Guidelines for the professional installation of Twisted Pair cables class 1 |
| PREN 26 : DRAFT 2012 | GAS-FIRED INSTANTANEOUS WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER |
| UNI EN 81-31 : 2010 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF GOODS ONLY - PART 31: ACCESSIBLE GOODS ONLY LIFTS |
| DIN EN 12952-11 E : 2007 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 11: REQUIREMENTS FOR LIMITING DEVICES OF THE BOILER AND ACCESSORIES |
| BS EN 115:1995 | Safety rules for the construction and installation of escalators and passenger conveyors. |
| UNE-EN 60079-14:2016 | Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
| DIN EN 12952-11:2007-09 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 11: REQUIREMENTS FOR LIMITING DEVICES OF THE BOILER AND ACCESSORIES |
| EN 12414 : 1999 | VEHICLE PARKING CONTROL EQUIPMENT - PAY AND DISPLAY TICKET MACHINE - TECHNICAL AND FUNCTIONAL REQUIREMENTS |
| UNE-EN 81-2:2001 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS. |
| I.S. EN 12414:2000 | VEHICLE PARKING CONTROL EQUIPMENT - PAY AND DISPLAY TICKET MACHINE - TECHNICAL AND FUNCTIONAL REQUIREMENTS |
| UNI EN 12952-11 : 2007 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 11: REQUIREMENTS FOR LIMITING DEVICES OF THE BOILER AND ACCESSORIES |
| UNI EN 81-3 : 2008 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 3: ELECTRIC AND HYDRAULIC SERVICE LIFTS |
| UNI EN 81-2 : 2010 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
| EN 483:1999/A4:2007 | GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW |
| UNI EN 81-1 : 2010 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS |
| UNI EN 12953-9 : 2007 | SHELL BOILERS - PART 9: REQUIREMENTS FOR LIMITING DEVICES OF THE BOILER AND ACCESSORIES |
| UNI EN 12957 : 2009 | MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES |
| DD ENV 50234:1997 | Aeronautical ground lighting electrical installation. Flashing lights. Equipment specifications and tests |
| DD ENV 50232:1997 | Aeronautical ground lighting electrical installation. Isolating transformer. Equipment specifications and tests |
| 00/244337 DC : DRAFT OCT 2000 | PREN 14038-1 - ELECTROCHEMICAL RE-ALKALISATION AND CHLORIDE EXTRACTION TREATMENTS FOR REINFORCED CONCRETE - PART 1: RE-ALKALISATION |
| 02/103832 DC : DRAFT MAY 2002 | PREN 1648-1 - LEISURE ACCOMMODATION VEHICLES - 12 V DIRECT CURRENT EXTRA LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 1: CARAVANS |
| 00/705761 DC : DRAFT FEB 2000 | PREN 13814 - FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY |
| 99/715322 DC : DRAFT NOV 99 | PREN 12952-11 - WATER-TUBE BOILERS - PART 11: REQUIREMENTS FOR LIMITING DEVICES AND SAFETY CIRCUITS OF THE BOILER AND ACCESORIES |
| CEI UNI EN 12414 : 2001 | VEHICLE PARKING CONTROL EQUIPMENT - PAY AND DISPLAY TICKET MACHINE - TECHNICAL AND FUNCTIONAL REQUIREMENTS |
| I.S. EN 81-31:2010 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF GOODS ONLY - PART 31: ACCESSIBLE GOODS ONLY LIFTS |
| BS EN 12669:2000 | Direct gas-fired hot air blowers for use in greenhouses and supplementary non-domestic space heating |
| BS EN 12696:2000 | Cathodic protection of steel in concrete |
| 97/204928 DC : DRAFT APR 1997 | PREN 50273 - INSTALLATION OF ELECTRICAL APPARATUS IN AREAS ENDANGERED BY EXPLOSIVE SUBSTANCES |
| 95/214868 DC : 0 | PREN 50178 - ELECTRONIC EQUIPMENT FOR USE IN POWER INSTALLATIONS |
| BS EN 81-1 : 1998 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS |
| BS EN 12952-11:2007 | Water-tube boilers and auxiliary installations Requirements for limiting devices of the boiler and accessories |
| BS EN 12953-9:2007 | Shell boilers Requirements for limiting devices of the boiler and accessories |
| BS EN 81-2 : 1998 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
| BS EN 483 : 2000 | GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW |
| BS EN 12957 : 2001 | MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES |
| BS EN 13636:2004 | Cathodic protection of buried metallic tanks and related piping |
| DIN EN 81-2:2010-08 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
| EN 81-3:2000+A1:2008/AC:2009 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 3: ELECTRIC AND HYDRAULIC SERVICE LIFTS |
| EN 81-31:2010 | Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts |
| EN 81-2 : 1998 + A3 2009 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
| EN 81-1:1998+A3:2009 | Safety rules for the construction and installation of lifts - Part 1: Electric lifts |
| EN 13636:2004 | Cathodic protection of buried metallic tanks and related piping |
| DIN VDE 0800-9 : 1989 | TELECOMMUNICATIONS; KU-VALUES OF SAFETY RELEVANT COMPONENTS AND INSULATIONS |
| 05/30138201 DC : DRAFT AUG 2005 | ISO 12696 - CATHODIC PROTECTION OF STEEL IN CONCRETE |
| BS EN 60598-2-23:1997 | Luminaires. Particular requirements Extra low voltage lighting systems for filament lamps |
| CEI EN 60598-2-6 : 1998 | LUMINAIRES - PART 2: PARTICULAR REQUIREMENTS - SECTION 6: LUMINAIRES WITH BUILT-IN TRANSFORMERS FOR FILAMENT LAMPS |
| 04/30113996 DC : 0 | PREN 81-41 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY |
| CEI R205-002 : 1997 | HOME AND BUILDING ELECTRONIC SYSTEMS - TECHNICAL REPORT 2: GUIDELINES FOR THE PROFESSIONAL INSTALLATION OF TWISTED PAIR CABLES CLASS 1 |
| I.S. HD 384.4.41:1998 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 4: PROTECTION FOR SAFETY - CHAPTER 41: PROTECTION AGAINST ELECTRIC SHOCK |
| DIN EN 81-3:2011-06 | Safety rules for the construction und installation of lifts - Part 3: Electric and hydraulic service lifts (includes Amendment A1:2008 + Corrigendum AC:2009) |
| BS EN 81-3 : 2003 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 3: ELECTRIC AND HYDRAULIC SERVICE LIFTS |
| 10/30216944 DC : 0 | BS EN 81-22 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR TRANSPORT OF PERSONS AND GOODS - PART 22: ELECTRIC LIFTS WITH INCLINED PATH |
| EN 60598-2-6:1994/A1:1997 | LUMINAIRES - PART 2: PARTICULAR REQUIREMENTS - SECTION 6: LIMINAIRES WITH BUILT-IN TRANSFORMERS OR CONVERTERS FOR FILAMENT LAMPS |
| EN 115:1995/A2:2004 | SAFETY RULES FOR THE CONSTRUCTION & INSTALLATION OF ESCALATORS & PASSENGER CONVEYORS |
| EN 60967:1992/A51:1994 | SAFETY OF ELECTRICALLY HEATED BLANKETS, PADS AND SIMILAR FLEXIBLE HEATING APPLIANCES FOR HOUSEHOLD USE |
| EN 12953-9:2007 | Shell boilers - Part 9: Requirements for limiting devices of the boiler and accessories |
| EN 12696 : 2000 | CATHODIC PROTECTION OF STEEL IN CONCRETE |
| DIN EN 81-1:2010-06 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS |
| DIN EN 81-1:2000-05 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS |
| EN 12957:2001+A1:2009 | Machine tools - Safety - Electro discharge machines |
| DIN VDE 0660-501 : 1992 | SWITCHGEAR AND CONTROLGEAR; LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 4: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR CONSTRUCTION SITES (ACS) |
| IEC 60038:2009 | IEC standard voltages |
| BS 4491-1:1989 | Appliance couplers for household and similar general purposes Specification of general requirements |
| IEC 60884-1:2002+AMD1:2006+AMD2:2013 CSV | Plugs and socket-outlets for household and similar purposes - Part1: General requirements |
| BS EN 60999:1993 | Connecting devices. Safety requirements for screw-type and screwless-type clamping units for electrical copper conductors |
| BS EN 60068-2-32:1993 | Environmental testing. Test methods Test Ed. Free fall |
| BS 6004:2000 | Electric cables. PVC insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring |
| IEC 60685-2-1:1980 | Connecting devices (junction and/or tapping) for household and similar fixed electrical installations - Part 2: Particular requirements - Screwless terminals for connecting copper conductors without special preparation |
| BS 7211:1998 | Electric cables. Thermosetting insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring, and having low emission of smoke and corrosive gases when affected by fire |
| BS 6726:1998 | Specification for festoon and temporary lighting cables and cords |
| BS 7671(2001) : 2001 AMD 14905 | REQUIREMENTS FOR ELECTRICAL INSTALLATIONS |
| BS 6899:1991 | Specification for rubber insulation and sheath of electric cables |
| BS EN 60269-2:1995 | Low-voltage fuses Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) |
| IEC 60685-1:1980 | Connecting devices (junction and/or tapping) for household and similar fixed electrical installations - Part 1: General requirements |
| HD 365 : 200S3 | CLASSIFICATION OF DEGREES OF PROTECTION PROVIDED BY ENCLOSURES |
| BS EN 60068-2-2:2007 | Environmental testing Tests. Test B. Dry heat |
| BS EN 60065 : 2014 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014, MODIFIED) |
| BS EN 61058-1 : 2002 | SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| BS EN 60269-3:1995 | BS Low-voltage fuses Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.