EN 60929:2011/A1:2016
Current
Current
The latest, up-to-date edition.
AC AND/OR DC-SUPPLIED ELECTRONIC CONTROL GEAR FOR TUBULAR FLUORESCENT LAMPS - PERFORMANCE REQUIREMENTS
Amendment of
Published date
03-11-2016
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General notes on tests
5 Marking
6 General statement
7 Starting conditions
8 Operating conditions
9 Circuit power factor
10 Supply current
11 Maximum current in any lead to a cathode
12 Lamp operating current waveform
13 Impedance at audio frequencies
14 Operational tests for abnormal conditions
15 Endurance
Annex A (normative) - Tests
Annex B (normative) - Reference ballasts
Annex C (normative) - Conditions for reference lamps
Annex D (informative) - Explanation of starting conditions
Annex E (normative) - Control interface for controllable
control gear
Annex F (informative) - Examples of suitable test
set-ups for SoS and CV testing
Annex G (informative) - Example of a SoS-CV test
with diagrammatic view
Annex ZA (normative) - Normative references to international
publications with their corresponding European
publications
Bibliography
Defines performance requirements for electronic control gear for use on a.c. at 50 Hz or 60 Hz and/or d.c. supplies, both up to 1000 V, with operating frequencies deviating from the supply frequency, associated with fluorescent lamps as specified in IEC 60081 and IEC 60901, and other fluorescent lamps for high-frequency operation.
| Committee |
TC 34
|
| DevelopmentNote |
Supersedes HD 302. (07/2004) Supersedes EN 60925. (11/2011)
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-EN 60929:2011 | Identical |
| NEN EN IEC 60929 : 2011 AMD 1 2016 | Identical |
| I.S. EN 60929:2011 | Identical |
| PN EN 60929 : 2011 AMD 1 2016 | Identical |
| SN EN 60929:2011+A1:2016 | Identical |
| VDE 0712-23 : 2016 | Identical |
| DIN EN 60929 : 2016 | Identical |
| CEI EN 60929/A1 : 2018 | Identical |
| CEI EN 60929/A1:2016 | Identical |
| BS EN 60929 : 2011 | Identical |
| NF EN 60929 : 2011 AMD 1 2016 | Identical |
| IEC 60929:2011+AMD1:2015 CSV | Identical |
| NBN EN 60929 : 2011 AMD 1 2016 | Identical |
| NEN 10929 : 93 AMD 2 1996 | Identical |
| BS EN 60929:2011+A1:2016 | Identical |
| BS EN 62386-208:2009 | Digital addressable lighting interface Particular requirements for control gear. Switching function (device type 7) |
| PREN 12665 : DRAFT 2009 | LIGHT AND LIGHTING - BASIC TERMS AND CRITERIA FOR SPECIFYING LIGHTING REQUIREMENTS |
| BS EN 62386-205:2009 | Digital addressable lighting interface Particular requirements for control gear. Supply voltage controller for incandescent lamps (device type 4) |
| CEI EN 62639 : 2012 | FLUORESCENT INDUCTION LAMPS - PERFORMANCE REQUIREMENTS |
| BS EN 60901 : 1996 | SINGLE-CAPPED FLUORESCENT LAMPS - PERFORMANCE SPECIFICATIONS |
| EN IEC 61347-2-14:2018 | Lamp controlgear - Part 2-14: Particular requirements for DC and/or AC supplied electronic controlgear for fluorescent induction lamps |
| DIN EN 12665:2016-09 (Draft) | LIGHT AND LIGHTING - BASIC TERMS AND CRITERIA FOR SPECIFYING LIGHTING REQUIREMENTS |
| EN 62386-207 : 2009 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 207: PARTICULAR REQUIREMENTS FOR CONTROL GEAR - LED MODULES (DEVICE TYPE 6) |
| EN 62639:2012 | Fluorescent induction lamps - Performance specification |
| EN 62386-103:2014 | Digital addressable lighting interface - Part 103: General requirements - Control devices |
| EN 62386-204 : 2009 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 204: PARTICULAR REQUIREMENTS FOR CONTROL GEAR - LOW VOLTAGE HALOGEN LAMPS (DEVICE TYPE 3) |
| EN 62386-209 : 2011 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 209: PARTICULAR REQUIREMENTS FOR CONTROL GEAR - COLOUR CONTROL (DEVICE TYPE 8) |
| EN 62718:2016 | Railway applications - Rolling stock - DC supplied electronic ballasts for lighting fluorescent lamps |
| EN 61347-2-7:2012 | Lamp controlgear - Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained) |
| EN 62386-205 : 2009 | Digital addressable lighting interface - Part 205: Particular requirements for control gear - Supply voltage controller for incandescent lamps (device type 4) |
| BS EN 62386-210:2011 | Digital addressable lighting interface Particular requirements for control gear. Sequencer (device type 9) |
| DIN EN 60928 : 2000 | AUXILIARIES FOR LAMPS - A.C. SUPPLIED ELECTRONIC BALLASTS FOR TUBULAR FLUORESCENT LAMPS - GENERAL AND SAFETY REQUIREMENTS |
| BS EN 62386-202:2009 | Digital addressable lighting interface Particular requirements for control gear. Self-contained emergency lighting (device type 1) |
| BS EN 62386-207:2009 | Digital addressable lighting interface Particular requirements for control gear. LED modules (device type 6) |
| 09/30185891 DC : 0 | BS EN 12665 - LIGHT AND LIGHTING - BASIC TERMS AND CRITERIA FOR SPECIFYING LIGHTING REQUIREMENTS |
| BS EN 62718:2016 | Railway applications. Rolling stock. DC supplied electronic ballasts for lighting fluorescent lamps |
| 16/30342256 DC : 0 | BS EN 50107-3 - PRODUCT STANDARD COVERING LUMINOUS SIGNS WITH DISCHARGE LAMPS AND/OR LED (LIGHT EMITTING DIODES) AND/OR EL (ELECTROLUMINESCENT) LIGHTSOURCES WITH A NOMINAL VOLTAGE NOT EXCEEDING 1000 V, WITH THE EXCLUSION OF GENERAL LIGHTING, TRAFFIC- OR EMERGENCY RELATED PURPOSE |
| BS EN 62442-1:2011 | Energy performance of lamp controlgear Controlgear for fluorescent lamps. Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear |
| BS EN 60081 : 1998 | DOUBLE-CAPPED FLUORESCENT LAMPS - PERFORMANCE SPECIFICATIONS |
| BS EN 61347-2-3:2011 | Lamp control gear Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps |
| CEI EN 61347-2-3 : 2012 | LAMP CONTROLGEAR - PART 2-3: PARTICULAR REQUIREMENTS FOR A.C. AND/OR D.C. SUPPLIED ELECTRONIC CONTROL GEAR FOR FLUORESCENT LAMPS |
| BS EN 61347-2-7:2012 | Lamp controlgear Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained) |
| VDE 0712-22 : 2000 | AUXILIARIES FOR LAMPS - A.C. SUPPLIED ELECTRONIC BALLASTS FOR TUBULAR FLUORESCENT LAMPS - GENERAL AND SAFETY REQUIREMENTS |
| UNE-EN 62718:2016 | Railway applications - Rolling stock - DC supplied electronic ballasts for lighting fluorescent lamps |
| BS EN 62386-203:2009 | Digital addressable lighting interface Particular requirements for control gear. Discharge lamps (excluding fluorescent lamps) (device type 2) |
| UNE-EN 61347-2-3:2012 | Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps |
| I.S. EN 60901:1997 | SINGLE-CAPPED FLUORESCENT LAMPS - PERFORMANCE SPECIFICATIONS |
| I.S. EN 62442-1:2011 | ENERGY PERFORMANCE OF LAMP CONTROLGEAR - PART 1: CONTROLGEAR FOR FLUORESCENT LAMPS - METHOD OF MEASUREMENT TO DETERMINE THE TOTAL INPUT POWER OF CONTROLGEAR CIRCUITS AND THE EFFICIENCY OF THE CONTROLGEAR |
| BS EN 62386-103:2014+A1:2018 | Digital addressable lighting interface General requirements. Control devices |
| I.S. EN 62718:2016 | RAILWAY APPLICATIONS - ROLLING STOCK - DC SUPPLIED ELECTRONIC BALLASTS FOR LIGHTING FLUORESCENT LAMPS |
| PREN 50107-3 : DRAFT 2016 | PRODUCT STANDARD COVERING LUMINOUS SIGNS WITH DISCHARGE LAMPS AND/OR LED (LIGHT EMITTING DIODES) AND/OR EL (ELECTROLUMINESCENT) LIGHTSOURCES WITH A NOMINAL VOLTAGE NOT EXCEEDING 1000 V, WITH THE EXCLUSION OF GENERAL LIGHTING, TRAFFIC- OR EMERGENCY RELATED PURPOSE |
| UNI EN 12665 : 2011 | LIGHT AND LIGHTING - BASIC TERMS AND CRITERIA FOR SPECIFYING LIGHTING REQUIREMENTS |
| EN 50294 : 98 AMD 2 2003 | MEASUREMENT METHOD OF TOTAL INPUT POWER OF BALLAST-LAMP CIRCUITS |
| I.S. EN 62639:2012 | FLUORESCENT INDUCTION LAMPS - PERFORMANCE SPECIFICATION (IEC 62639:2012 (EQV)) |
| BS EN 62639:2012 | Fluorescent induction lamps. Performance specification |
| BS EN 62386-209:2011 | Digital addressable lighting interface Particular requirements for control gear. Colour control (device type 8) |
| BS EN 50294:1998 | Measurement method of total input power of ballast-lamp circuits |
| I.S. EN 60081:1998 | DOUBLE-CAPPED FLUORESCENT LAMPS - PERFORMANCE SPECIFICATIONS |
| UNE-EN 61347-2-7:2012 | Lamp controlgear -- Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained) |
| I.S. EN 61549:2003 | MISCELLANEOUS LAMPS (IEC 61549:2003 (EQV)) |
| EN 60081:1998/A11:2018 | Double-capped fluorescent lamps - Performance specifications |
| UNE-EN 12665:2012 | Light and lighting - Basic terms and criteria for specifying lighting requirements |
| BS EN 12665:2011 | Light and lighting. Basic terms and criteria for specifying lighting requirements |
| EN 62442-1:2011/A11:2017 | ENERGY PERFORMANCE OF LAMP CONTROLGEAR - PART 1: CONTROLGEAR FOR FLUORESCENT LAMPS - METHOD OF MEASUREMENT TO DETERMINE THE TOTAL INPUT POWER OF CONTROLGEAR CIRCUITS AND THE EFFICIENCY OF THE CONTROLGEAR |
| 17/30355026 DC : 0 | BS EN 60081:1998/FPRA6:2015/PRAA:2017 - DOUBLE-CAPPED FLUORESCENT LAMPS - PERFORMANCE SPECIFICATIONS |
| UNE-EN 61549:2004 | Miscellaneous lamps |
| I.S. EN IEC 61347-2-14:2018 | LAMP CONTROLGEAR - PART 2-14: PARTICULAR REQUIREMENTS FOR DC AND/OR AC SUPPLIED ELECTRONIC CONTROLGEAR FOR FLUORESCENT INDUCTION LAMPS |
| I.S. EN 62386-210:2011 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 210: PARTICULAR REQUIREMENTS FOR CONTROL GEAR - SEQUENCER (DEVICE TYPE 9) (IEC 62386-210:2011 (EQV)) |
| CEI EN 61347-2-7 : 2012 | LAMP CONTROLGEAR - PART 2-7: PARTICULAR REQUIREMENTS FOR BATTERY SUPPLIED ELECTRONIC CONTROLGEAR FOR EMERGENCY LIGHTING (SELF-CONTAINED) |
| BS EN 62386-206:2009 | Digital addressable lighting interface Particular requirements for control gear. Conversion from digital signal into d.c. voltage (device type 5) |
| BS EN 62386-204:2009 | Digital addressable lighting interface Particular requirements for control gear. Low voltage halogen lamps (device type 3) |
| I.S. EN 61347-2-7:2012 | LAMP CONTROLGEAR - PART 2-7: PARTICULAR REQUIREMENTS FOR BATTERY SUPPLIED ELECTRONIC CONTROLGEAR FOR EMERGENCY LIGHTING (SELF-CONTAINED) (IEC 61347-2-7:2011 (EQV)) |
| BS EN 61549 : 2003 | MISCELLANEOUS LAMPS |
| I.S. EN 61347-2-3:2011 | LAMP CONTROL GEAR - PART 2-3: PARTICULAR REQUIREMENTS FOR A.C. AND/OR D.C. SUPPLIED ELECTRONIC CONTROL GEAR FOR FLUORESCENT LAMPS |
| EN 60598-1:2015/A1:2018 | LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS |
| CEI EN 62442-1 : 2012 | ENERGY PERFORMANCE OF LAMP CONTROLGEAR - PART 1: CONTROLGEAR FOR FLUORESCENT LAMPS - METHOD OF MEASUREMENT TO DETERMINE THE TOTAL INPUT POWER OF CONTROLGEAR CIRCUITS AND THE EFFICIENCY OF THE CONTROLGEAR |
| I.S. EN 12665:2011 | LIGHT AND LIGHTING - BASIC TERMS AND CRITERIA FOR SPECIFYING LIGHTING REQUIREMENTS |
| EN 60901:1996/A6:2017 | SINGLE-CAPPED FLUORESCENT LAMPS - PERFORMANCE SPECIFICATIONS (IEC 60901:1996/A6:2014, MODIFIED) |
| 97/204928 DC : DRAFT APR 1997 | PREN 50273 - INSTALLATION OF ELECTRICAL APPARATUS IN AREAS ENDANGERED BY EXPLOSIVE SUBSTANCES |
| EN 62386-210:2011 | Digital addressable lighting interface - Part 210: Particular requirements for control gear - Sequencer (device type 9) |
| EN 62386-208:2009 | Digital addressable lighting Interface - Part 208: Particular requirements for control gear - Switching function (device type 7) |
| EN 62386-202 : 2009 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 202: PARTICULAR REQUIREMENTS FOR CONTROL GEAR - SELF-CONTAINED EMERGENCY LIGHTING (DEVICE TYPE 1) |
| EN 61549:2003/A3:2012 | MISCELLANEOUS LAMPS (IEC 61549:2003/A3:2012) |
| EN 62386-203:2009 | Digital addressable lighting interface - Part 203: Particular requirements for control gear - Discharge lamps (excluding fluorescent lamps) (device type 2) |
| EN 62386-206:2009 | Digital addressable lighting interface - Part 206: Particular requirements for control gear - Conversion from digital signal into d. c. voltage (device type 5) |
| EN 61347-2-3:2011/A1:2017 | LAMP CONTROL GEAR - PART 2-3: PARTICULAR REQUIREMENTS FOR A.C. AND/OR D.C. SUPPLIED ELECTRONIC CONTROL GEAR FOR FLUORESCENT LAMPS (IEC 61347-2-3:2011/A1:2016) |
| IEC 61347-2-3:2011+AMD1:2016 CSV | Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps |
| IEC 61000-4-30 : 3.0EN+(REDLINE+VERSION) | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS |
| EN 61000-4-30:2015/AC:2017-01 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS (IEC 61000-4-30:2015/COR1:2016) |
| IEC 61547:2009 | Equipment for general lighting purposes - EMC immunity requirements |
| IEC 60050-845:1987 | International Electrotechnical Vocabulary (IEV) - Part 845: Lighting |
| IEC 61347-1:2015 RLV | Lamp controlgear - Part 1: General and safety requirements |
| EN 61347-2-3:2011/A1:2017 | LAMP CONTROL GEAR - PART 2-3: PARTICULAR REQUIREMENTS FOR A.C. AND/OR D.C. SUPPLIED ELECTRONIC CONTROL GEAR FOR FLUORESCENT LAMPS (IEC 61347-2-3:2011/A1:2016) |
| IEC 60410:1973 | Sampling plans and procedures for inspection by attributes |
| IEC 60901:1996+AMD1:1997+AMD2:2000 CSV | Single-capped fluorescent lamps - Performance specifications |
| EN 61347-1:2015 | Lamp controlgear - Part 1: General and safety requirements |
| EN 61000-3-2:2014 | Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) |
| IEC TR 62750:2012 | Unified fluorescent lamp dimming standard calculations |
| EN 60901:1996/A6:2017 | SINGLE-CAPPED FLUORESCENT LAMPS - PERFORMANCE SPECIFICATIONS (IEC 60901:1996/A6:2014, MODIFIED) |
| CISPR TR 30-1:2012 | Test method on electromagnetic emissions - Part 1: Electronic control gear for single- and double-capped fluorescent lamps |
| EN 61547:2009 | Equipment for general lighting purposes - EMC immunity requirements |
| IEC 61000-3-2 : 4.0 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE) |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.