• There are no items in your cart

EN 61326-3-2:2008

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment
Superseded date

02-02-2022

Published date

06-27-2008

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General
5 EMC test plan
  5.1 General
  5.2 Configuration of EUT during testing
      5.2.1 General
      5.2.2 Composition of EUT
      5.2.3 Assembly of EUT
      5.2.4 I/O ports
      5.2.5 Auxiliary equipment
      5.2.6 Cabling and earthing (grounding)
  5.3 Operation conditions of EUT during testing
      5.3.1 Operation modes
      5.3.2 Environmental conditions
      5.3.3 EUT software during test
  5.4 Specification of performance criteria
  5.5 Test description
6 Performance criteria
  6.1 Performance criteria A, B and C
  6.2 Performance criterion FS
  6.3 Application of the performance criterion FS
7 Immunity requirements
8 Test set-up and test philosophy for EUT with functions
  intended for safety applications
  8.1 Testing of safety-related systems and equipment intended
      to be used in safety-related systems
  8.2 Test philosophy for equipment intended for use in
      safety-related systems
  8.3 Test philosophy for safety-related systems
  8.4 Test configuration
  8.5 Monitoring
9 Test results and test report
Annex A (informative) Evaluation of electromagnetic phenomena
Annex B (informative) Details of the specified electromagnetic
        environment
Annex C (informative) Example of immunity levels in the
        process industry
Annex ZA (normative) Normative references to international
         publications with their corresponding European
         publications
Bibliography

La CEI 61326-1 est applicable à la présente norme CEI 61326-3-2, mais elle est limitée aux systèmes et matériels pour applications industrielles destinés à réaliser des fonctions de sécurité telles que définies dans la CEI 61508, avec un SIL 1-3. L'environnement considéré par la présente norme est industriel, en bâtiment ou en extérieur, et il peut être rencontré dans des applications industrielles dont l'environnement électromagnétique possède des caractéristiques spécifiées (par exemple l'industrie de procédés). Par rapport à l'environnement industriel général (voir la CEI 61326-3-1), la différence de l'environnement électromagnétique couvert par la présente norme résulte des mesures d'atténuation employées contre les phénomènes EM conduisant à un environnement électromagnétique spécifié.",PE

Committee
CLC/TC 65X
DevelopmentNote
To be read in conjunction with EN 61326-1. (06/2008) Supersedes EN 61326. (10/2008)
DocumentType
Standard
PublisherName
European Committee for Standards - Electrical
Status
Superseded
SupersededBy
Supersedes

CEI EN 61784-3-12 : 2012 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-12: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 12
PD CLC/TR 62685:2011 Industrial communication networks. Profiles. Assessment guideline for safety devices using IEC 61784-3 functional safety communication profiles (FSCPs)
CEI EN 61131-6 : 2013 PROGRAMMABLE CONTROLLERS - PART 6: FUNCTIONAL SAFETY
CEI EN 61784-3-2 : 2012 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-2: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 2
BS EN 50402:2017 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen. Requirements on the functional safety of gas detection systems
08/30195618 DC : 0 BS EN 50325-5 - INDUSTRIAL COMMUNICATIONS SUBSYSTEM BASED ON ISO 11898 (CAN) FOR CONTROLLER-DEVICE INTERFACES - PART 5: FUNCTIONAL SAFETY COMMUNICATION BASED ON EN 50325-4
CEI EN 61784-3-8 : 2012 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-8: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 8
BS EN 61784-3-8:2010 Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 8
BS EN 50270:2015 Electromagnetic compatibility. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
DIN EN 50402 : 2018 ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE OR TOXIC GASES OR VAPOURS OR OF OXYGEN - REQUIREMENTS ON THE FUNCTIONAL SAFETY OF GAS DETECTION SYSTEMS
VDE 0400-70 : 2018 ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE OR TOXIC GASES OR VAPOURS OR OF OXYGEN - REQUIREMENTS ON THE FUNCTIONAL SAFETY OF GAS DETECTION SYSTEMS
EN 61131-6:2012 Programmable controllers - Part 6: Functional safety
BS EN 61131-6:2012 Programmable controllers Functional safety
13/30260741 DC : 0 BS EN 50270 - ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN
BS EN 61784-3:2010 Industrial communication networks. Profiles Functional safety fieldbuses. General rules and profile definitions
EN 50402:2017 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of gas detection systems
CEI EN 61784-3 : 2012 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3: FUNCTIONAL SAFETY FIELDBUSES - GENERAL RULES AND PROFILE DEFINITIONS
EN 61784-3:2016/A1:2017 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3: FUNCTIONAL SAFETY FIELDBUSES - GENERAL RULES AND PROFILE DEFINITIONS (IEC 61784-3:2016/A1:2017)
CLC/TR 62685 : 2011 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - ASSESSMENT GUIDELINE FOR SAFETY DEVICES USING IEC 61784-3 FUNCTIONAL SAFETY COMMUNICATION PROFILES (FSCPS) (IEC/TR 62685:2010)
I.S. EN 61784-3:2016 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3: FUNCTIONAL SAFETY FIELDBUSES - GENERAL RULES AND PROFILE DEFINITIONS
CEI CLC/TR 62685 : 2012 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - ASSESSMENT GUIDELINE FOR SAFETY DEVICES USING IEC 61784-3 FUNCTIONAL SAFETY COMMUNICATION PROFILES (FSCPS)
I.S. EN 50402:2017 ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE OR TOXIC GASES OR VAPOURS OR OF OXYGEN - REQUIREMENTS ON THE FUNCTIONAL SAFETY OF FIXED GAS DETECTION SYSTEMS
EN 61784-3-12:2010 Industrial communication networks - Profiles - Part 3-12: Functional safety fieldbuses - Additional specifications for CPF 12
I.S. EN 50270:2015 ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN
BS EN 61508-7:2010 Functional safety of electrical/electronic/ programmable electronic safety related systems Overview of techniques and measures
I.S. EN 61784-3-12:2010 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-12: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 12
NF EN 50325-5 : 2011 INDUSTRIAL COMMUNICATIONS SUBSYSTEM BASED ON ISO 11898 (CAN) FOR CONTROLLER-DEVICE INTERFACES - PART 5: FUNCTIONAL SAFETY COMMUNICATION BASED ON EN 50325-4
I.S. EN 50325-5:2010 INDUSTRIAL COMMUNICATIONS SUBSYSTEM BASED ON ISO 11898 (CAN) FOR CONTROLLER-DEVICE INTERFACES - PART 5: FUNCTIONAL SAFETY COMMUNICATION BASED ON EN 50325-4
PREN 50325-5 : DRAFT 2008 INDUSTRIAL COMMUNICATIONS SUBSYSTEM BASED ON ISO 11898 (CAN) FOR CONTROLLER-DEVICE INTERFACES - PART 5: FUNCTIONAL SAFETY COMMUNICATION BASED ON EN 50325-4
BS EN 61784-3-12:2010 Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 12
CEI EN 61784-3-3 : 2012 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-3: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 3
BS EN 50325-5:2010 Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces Functional safety communication based on EN 50325-4
CEI EN 50325-5 : 2012 INDUSTRIAL COMMUNICATIONS SUBSYSTEM BASED ON ISO 11898 (CAN) FOR CONTROLLER-DEVICE INTERFACES - PART 5: FUNCTIONAL SAFETY COMMUNICATION BASED ON EN 50325-4
S.R. CLC/TR 62685:2011 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - ASSESSMENT GUIDELINE FOR SAFETY DEVICES USING IEC 61784-3 FUNCTIONAL SAFETY COMMUNICATION PROFILES (FSCPS) (IEC/TR 62685:2010 (EQV))
I.S. EN 61131-6:2012 PROGRAMMABLE CONTROLLERS - PART 6: FUNCTIONAL SAFETY (IEC 61131-6:2012 (EQV))
PREN 50270 : DRAFT 2013 ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN
EN 50325-5:2010 Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 5: Functional safety communication based on EN 50325-4
EN 61508-7:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures
EN 50270:2015 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen

IEC 61000-4-8 : 2.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-8: TESTING AND MEASUREMENT TECHNIQUES - POWER FREQUENCY MAGNETIC FIELD IMMUNITY TEST
IEC 61326-2-4:2012 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9
IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION) ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST
EN 61000-4-11:2004/A1:2017 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-11: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS IMMUNITY TESTS (IEC 61000-4-11:2004/A1:2017)
IEC 61511-1:2016+AMD1:2017 CSV Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements
IEC 61000-6-2:2016 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
IEC 61326-2-5:2012 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with field bus interfaces according to IEC 61784-1
IEC 61326-2-3:2012 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning
IEC 61000-4-11:2004+AMD1:2017 CSV Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
IEC 61326-3-1 : 2.0 ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-1: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - GENERAL INDUSTRIAL APPLICATIONS
IEC TS 61000-1-2:2008 Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena
EN 61326-2-1:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications
IEC 61000-4-8:2009 Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
IEC 61000-4-4:2012 RLV Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
EN 61000-4-2:2009 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
IEC 61508-4:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (see Functional Safety and IEC 61508)
EN 61326-2-3:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning
IEC 61000-4-6 : 4.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS
IEC 61000-4-6:2013 Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
EN 61000-4-3 : 2006 AMD 2 2010 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST
EN 61326-1:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
EN 61508-2:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems
ISO/IEC Guide 51:2014 Safety aspects Guidelines for their inclusion in standards
EN 61000-6-2:2005/corrigendum:2005 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005)
EN 61326-2-5:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for devices with field bus interfaces according to IEC 61784-1
EN 61000-4-8:2010 Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
IEC 61000-4-2:2008 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
IEC 61326-2-2:2012 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems
EN 61000-4-4:2012 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST (IEC 61000-4-4:2012)
EN 61000-4-6:2014/AC:2015 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS (IEC 61000-4-6:2013)
IEC 61326-2-1:2012 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications
IEC 61000-4-29:2000 Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
EN 61326-2-4:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9
EN 61326-3-1:2017 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applications
IEC 61000-6-2 : 3.0:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
IEC 61508-2:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see Functional Safety and IEC 61508)
EN 61000-4-29:2000 Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
IEC 61326-3-1:2017 Electrical equipment for measurement, control and laboratory use - EMC requirements – Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) – General industrial applications
EN 61326-2-2:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems
EN 61508-4:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.