EN 634-2:2007
Current
Current
The latest, up-to-date edition.
Cement-bonded particleboards - Specifications - Part 2: Requirements for OPC bonded particleboards for use in dry, humid and external conditions
Published date
02-28-2007
Publisher
Foreword
1 Scope
2 Normative references
3 Requirements
4 Verification of compliance
5 Marking
Bibliography
This European Standard for cement-bonded particleboards specifies the requirements for particleboards bonded with Ordinary Portland Cement (OPC) for use in dry, humid ) and external ) conditions. Additional information on supplementary properties for certain applications is also given.NOTE 1Boards made with cement other than OPC may comply with this Standard if test values are declared according to EN 13986. However, further parts of EN 634 may be developed in the future to cover other types of cement or other materials.NOTE 2Cement-bonded particleboard does not contain any asbestos fibre.
| Committee |
CEN/TC 112
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| PN EN 634-2 : 2008 | Identical |
| UNE-EN 634-2:2007 | Identical |
| SN EN 634-2 : 2007 | Identical |
| NS EN 634-2 : 2ED 2007 | Identical |
| I.S. EN 634-2:2007 | Identical |
| NEN EN 634-2 : 2007 | Identical |
| NBN EN 634-2 : 2007 | Identical |
| UNI EN 634-2 : 2007 | Identical |
| BS EN 634-2:2007 | Identical |
| NF EN 634-2 : 2007 | Identical |
| DIN EN 634-2:2007-05 | Identical |
| 11/30237554 DC : 0 | BS EN 14732 - TIMBER STRUCTURES - PREFABRICATED WALL, FLOOR AND ROOF ELEMENTS - REQUIREMENTS |
| PD CEN/TR 12872:2014 | Wood-based panels. Guidance on the use of load-bearing boards in floors, walls and roofs |
| 98/100166 DC : DRAFT FEB 1998 | PREN 318 - WOOD-BASED PANELS - DETERIORATION OF DIMENSIONAL CHANGES ASSOCIATED WITH CHANGES IN RELATIVE HUMIDITY |
| PREN 12871 : DRAFT 2011 | WOOD-BASED PANELS - DETERMINATION OF PERFORMANCE CHARACTERISTICS FOR LOAD BEARING PANELS FOR USE IN FLOORS, ROOFS AND WALLS |
| S.R. CEN TS 12872:2007 | WOOD-BASED PANELS - GUIDANCE ON THE USE OF LOAD-BEARING BOARDS IN FLOORS, WALLS AND ROOFS |
| BS EN 326-2 : 2010 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| EN 1128:1995 | Cement-bonded particleboards - Determination of hard body impact resistance |
| CEN/TS 12872:2007 | Wood-based panels - Guidance on the use of load-bearing boards in floors, walls and roofs |
| EN 12871:2013 | Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls |
| DD CEN/TS 12872:2007 | Wood-based panels. Guidance on the use of load-bearing boards in floors, walls and roofs |
| 98/100165 DC : DRAFT FEB 1998 | BS EN 326-2 - WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: QUALITY CONTROL IN THE FACTORY |
| DD ENV 12872:2000 | Wood-based panels. Guidance on the use of load-bearing boards in floors, walls and roofs |
| S.R. CEN/TR 12872:2014 | WOOD-BASED PANELS - GUIDANCE ON THE USE OF LOAD-BEARING BOARDS IN FLOORS, WALLS AND ROOFS |
| DIN EN 12871:2013-09 | Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls |
| DIN EN 13986:2015-06 | WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| DIN EN 326-2:2014-10 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control; German version EN 326-2:2010+A1:2014 |
| BS EN 12871:2013 | Wood-based panels. Determination of performance characteristics for load bearing panels for use in floors, roofs and walls |
| I.S. EN 13986:2004 | WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| I.S. EN 12871:2013 | WOOD-BASED PANELS - DETERMINATION OF PERFORMANCE CHARACTERISTICS FOR LOAD BEARING PANELS FOR USE IN FLOORS, ROOFS AND WALLS |
| I.S. EN 326-2:2010 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| 03/315081 DC : DRAFT SEP 2003 | EN 14732-2 - TIMBER STRUCTURES - PREFABRICATED WALL, FLOOR AND ROOF ELEMENTS - PART 2: PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS |
| EN 13986:2004 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| EN 13986:2004+A1:2015 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| UNI EN 326-2 : 2014 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| UNI EN 12871 : 2013 | WOOD-BASED PANELS - DETERMINATION OF PERFORMANCE CHARACTERISTICS FOR LOAD BEARING PANELS FOR USE IN FLOORS, ROOFS AND WALLS |
| BS EN 1128:1996 | Cement-bonded particleboards. Determination of hard body impact resistance |
| UNE-EN 12871:2013 | Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls |
| BS EN 321:2002 | Wood-based panels. Determination of moisture resistance under cyclic test conditions |
| BS EN 634-1:1995 | Cement-bonded particle boards. Specification General requirements |
| UNE-EN 13986:2006 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| EN 634-1:1995 | Cement-bonded particleboards - Specification - Part 1: General requirements |
| EN 13810-1:2002 | Wood-based panels - Floating floors - Part 1: Performance specifications and requirements |
| EN 321:2001 | Wood-based panels - Determination of moisture resistance under cyclic test conditions |
| EN 326-2:2010+A1:2014 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control |
| 11/30253904 DC : 0 | BS EN 12871 - WOOD-BASED PANELS - DETERMINATION OF PERFORMANCE CHARACTERISTICS FOR LOAD BEARING PANELS FOR USE IN FLOORS, ROOFS AND WALLS |
| 08/30171383 DC : DRAFT JUNE 2008 | BS EN 12871 - WOOD-BASED PANELS - PERFORMANCE SPECIFICATIONS AND REQUIREMENTS FOR LOAD BEARING BOARDS FOR USE IN FLOORS, WALLS AND ROOFS |
| 97/103073 DC : DRAFT MAY 1997 | PREN 12872-2 - WOOD-BASED PANELS - GUIDANCE FOR STRUCTURAL PANEL INSTALLATION - PART 2: WALL SHEATHING |
| I.S. ENV 12872:2000 | WOOD-BASED PANELS - GUIDANCE ON THE USE OF LOAD-BEARING BOARDS IN FLOORS, WALLS AND ROOFS |
| DIN EN 326-2 E : 2000 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| BS EN 13986 : 2004 | WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| BS EN 13810-1:2002 | Wood-based panels. Floating floors Performance specifications and requirements |
| DIN EN 326-2:2000-10 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| CEN/TR 12872:2014 | Wood-based panels - Guidance on the use of load-bearing boards in floors, walls and roofs |
| UNE-EN 13986:2006+A1:2015 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| EN 326-3:2003 | Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels |
| EN 321:2001 | Wood-based panels - Determination of moisture resistance under cyclic test conditions |
| EN 634-1:1995 | Cement-bonded particleboards - Specification - Part 1: General requirements |
| EN 319:1993 | Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board |
| EN 13986:2004 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| EN 310:1993 | Wood-based panels - Determination of modulus of elasticity in bending and of bending strength |
| EN 326-1:1994 | Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results |
| EN 326-2:2010+A1:2014 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control |
| EN 1328:1996 | Cement bonded particleboards - Determination of frost resistance |
| ENV 1156:1998 | Wood-based panels - Determination of duration of load and creep factors |
| EN 317:1993 | Particleboards and fibreboards - Determination of swelling in thickness after immersion in water |
| EN 1058:2009 | Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values |
| EN 789:2004 | Timber structures - Test methods - Determination of mechanical properties of wood based panels |
| EN 323:1993 | Wood-based panels - Determination of density |
| EN 320:2011 | Particleboards and fibreboards - Determination of resistance to axial withdrawal of screws |
| EN 318:2002 | Wood based panels - Determination of dimensional changes associated with changes in relative humidity |
| EN 335-3:1995 | Durability of wood and wood-based products - Definition of hazard classes of biological attack - Part 3: Application to wood-based panels |
| EN 1128:1995 | Cement-bonded particleboards - Determination of hard body impact resistance |
| EN 1995-1-1:2004/A2:2014 | EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS |
| EN 12871:2013 | Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.