• There are no items in your cart

EN 746-5 : 2000

Current
Current

The latest, up-to-date edition.

INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 5: PARTICULAR SAFETY REQUIREMENTS FOR SALT BATH THERMOPROCESSING EQUIPMENT
Published date

09-20-2000

FOREWORD
0 INTRODUCTION
1 SCOPE
2 NORMATIVE REFERENCES
3 DEFINITIONS
      3.1 Salt Bath Thermoprocessing Equipment
      3.2 Components
4 LIST OF HAZARDS
5 SAFETY REQUIREMENTS AND/OR MEASURES
      5.1 General
      5.2 Liquids in the salt bath area
      5.3 Leaking or Overflowing Salt
      5.4 Slipping or falling of persons into the molten
             salt
      5.5 Outlets from Cooling Systems
      5.6 Salt Splashes
      5.7 Overheating of the Bath
      5.8 Fumes, Dusts and Gases
      5.9 Breakage of fastening points
      5.10 Breakage of protection tube of thermo-couple
      5.11 Solidification and subsequent remelting of the
             salts in the bath
      5.12 Workpiece supports
      5.13 Ergonomic Requirements
6 VERIFICATION OF SAFETY REQUIREMENTS AND/OR MEASURES
      6.1 General
      6.2 Suggested test for safety devices and automatic
             shut down
      6.3 Suggested test for function of the agitator
             system
7 INFORMATION FOR USE
      7.1 General
      7.2 Specific information to be provided
ANNEX A (INFORMATIVE) Examples of salt bath furnace set-ups
ANNEX ZA (INFORMATIVE) Clauses of this European Standard
                       addressing essential requirements or
                       other provisions of EU Directives

This part of EN 746 gives the specific hazards and safety requirements for the melting and use of molten salt that shall be provided by the manufacturer for Salt Bath Industrial Thermoprocessing Equipment, whether it is used as an independent unit or an integrated part of a plant.

Committee
TC 186
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

Standards Relationship
NF EN 746-5 : 2000 Identical
NBN EN 746-5 : 2000 Identical
UNE-EN 746-5:2001 Identical
BS EN 746-5:2000 Identical
I.S. EN 746-5:2000 Identical
SN EN 746-5 : 2000 Identical
DIN EN 746-5:2001-04 Identical
NEN EN 746-5 : 2000 Identical
UNI EN 746-5 : 2002 Identical
PN EN 746-5 : 2003 Identical
NS EN 746-5 : 1ED 2000 Identical

DIN EN 746-8:2001-04 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 8: PARTICULAR SAFETY REQUIREMENTS FOR QUENCHING EQUIPMENT
EN 267:2009+A1:2011 Automatic forced draught burners for liquid fuels
DIN EN 746-1:2010-02 Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment (includes Amendment A1:2009)
DIN EN 267:2012-03 (Draft) AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS
DIN EN 267:2011-11 Automatic forced draught burners for liquid fuels
I.S. EN 746-1:1997 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 1: COMMON SAFETY REQUIREMENTS FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT
12/30258099 DC BS EN 267. Forced draught burners for liquid fuels
BS EN 267 : 2009 AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS
BS EN 746-8:2000 Industrial thermoprocessing equipment Particular safety requirements for quenching equipment
BS EN 746-1 : 1997 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 1: COMMON SAFETY REQUIREMENTS FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT
09/30182290 DC : 0 BS EN 746-1:1997/A1 - INDUSTRIAL THERMO PROCESSING EQUIPMENT - PART 1: COMMON SAFETY REQUIREMENTS FOR INDUSTRIAL THERMO PROCESSING EQUIPMENT
UNI EN 267 : 2011 AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS
UNI EN 746-1 : 2009 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 1: COMMON SAFETY REQUIREMENTS FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT
I.S. EN 267:2009 AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS
EN 746-8 : 2000 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 8: PARTICULAR SAFETY REQUIREMENTS FOR QUENCHING EQUIPMENT
EN 746-1:1997+A1:2009 Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment
UNE-EN 746-1:1997 INDUSTRIAL THERMOPROCESSING EQUIPMENT. PART 1: COMMON SAFETY REQUIREMENTS FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT.

EN 746-1:1997+A1:2009 Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment
EN 746-2:2010 Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
EN 346:1992/A1:1997 SPECIFICATION FOR PROTECTIVE FOOTWEAR FOR PROFESSIONAL USE
EN 614-1:2006+A1:2009 Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
EN 292-1 : 1991 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - BASIC TERMINOLOGY, METHODOLOGY
EN 746-8 : 2000 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 8: PARTICULAR SAFETY REQUIREMENTS FOR QUENCHING EQUIPMENT
EN 563:1994/A1:1999/AC:2000 SAFETY OF MACHINERY - TEMPERATURES OF TOUCHABLE SURFACES - ERGONOMICS DATA TO ESTABLISH TEMPERATURE LIMIT VALUES FOR HOT SURFACES
EN 10095:1999 Heat resisting steels and nickel alloys
EN 1093-4:1996+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Capture efficiency of an exhaust system - Tracer method
EN 166:2001 Personal eye-protection - Specifications
EN 953:1997+A1:2009 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
EN 469:2005/A1:2006 PROTECTIVE CLOTHING FOR FIREFIGHTERS - PERFORMANCE REQUIREMENTS FOR PROTECTIVE CLOTHING FOR FIREFIGHTING
EN 954-1 : 1996 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
EN 345:1992/A1:1997 SPECIFICATION FOR SAFETY FOOTWEAR FOR PROFESSIONAL USE
EN 292-2 : 91 AMD 1 95 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION
EN 531:1995/A1:1998 PROTECTIVE CLOTHING FOR INDUSTRIAL WORKERS EXPOSED TO HEAT
EN 61310-1:2008 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
EN 1070 : 1998 SAFETY OF MACHINERY - TERMINOLOGY

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.