• There are no items in your cart

EN 754-7:2016

Current
Current

The latest, up-to-date edition.

Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances on dimensions and form
Published date

06-08-2016

European foreword
1 Scope
2 Normative references
3 Tolerances on dimensions
4 Tolerances on form
Annex A (informative) - Wall thickness variation
       (eccentricity)
Bibliography

This European Standard specifies the tolerances on dimensions and form for aluminium and aluminium alloys cold drawn seamless tubes with an outside diameter (OD) from 3 mm to 350 mm (round tube, see Figure 1) or with a cross section contained within a circumscribing circle (CD) from 8 mm to 300 mm (other than round tube, see Figure 2) supplied in straight lengths.This European Standard only applies to tube produced by the seamless die/mandrel method of extrusion (and then cold drawn to the final dimensions required).The temper designations used in this part are according to EN 515.This document applies to cold drawn, seamless tube for general engineering applications.This document does not apply to:-cold drawn tube produced by the porthole/bridge method (EN 754-8),-tubes delivered in coils (EN 13958),-coiled tubes cut to length (EN 13958).(...)

Committee
CEN/TC 132
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

Standards Relationship
UNI EN 754-7:2016 Identical
NEN EN 754-7 : 2016 Identical
SN EN 754-7 : 2016 Identical
NS EN 754-7 : 2ED 2008 Identical
PN EN 754-7 : 2016 Identical
UNI EN 754-7 : 2008 Identical
NF EN 754-7 : 2016 Identical
NBN EN 754-7 : 2016 Identical
NEN EN 754-7 : 2016 Similar to
I.S. EN 754-7:2016 Identical
SN EN 754-4 : 2008 Identical
SN EN 754-5 : 2008 Identical
DIN EN 754-7:2016-10 Identical
BS EN 754-7:2016 Identical
UNE-EN 754-7:2016 Identical

UNE-EN 13195:2014 Aluminium and aluminium alloys - Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore)
06/30136505 DC : 0 EN 754-1 - ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
UNI EN 1090-3 : 2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
14/30301152 DC : 0 BS EN 12392 - ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT
DIN EN 13195:2013-12 ALUMINIUM AND ALUMINIUM ALLOYS - SPECIFICATIONS FOR WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE)
PREN 12392 : DRAFT 2014 ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT
98/105109 DC : DRAFT JUNE 1998 PREN 1317-5 - ROAD RESTRAINT SYSTEMS - PART 5: DURABILITY AND EVALUATION OF CONFORMITY
I.S. EN 1090-3:2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
ONORM EN 1090-3 : 2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
DIN EN 754-8:2016-10 ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 8: PORTHOLE TUBES, TOLERANCES ON DIMENSIONS AND FORM
BS EN 13958:2008 Aluminium and aluminium alloys. Cold drawn, round, coiled tube for general applications. Specification
BS EN 754-1:2016 Aluminium and aluminium alloys. Cold drawn rod/bar and tube Technical conditions for inspection and delivery
DIN EN 13958:2009-01 ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN, ROUND, COILED TUBE FOR GENERAL APPLICATIONS - SPECIFICATION
EN 13195:2013 Aluminium and aluminium alloys - Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore)
EN 13958:2008 Aluminium and aluminium alloys - Cold drawn, round, coiled tube for general applications - Specification
EN 13195-1 : 2002 ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) - PART 1: SPECIFICATIONS
EN 12392:2016 Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment
DIN EN 13195-1:2002-11 ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) - PART 1: SPECIFICATIONS
09/30202316 DC : 0 BS EN 12514-4 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 4: SAFETY REQUIREMENTS AND TESTS - PIPINGS AND PARTS WITHIN PIPELINES
PREN 1090-3 : DRAFT 2017 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
UNI EN 13195 : 2013 ALUMINIUM AND ALUMINIUM ALLOYS - SPECIFICATIONS FOR WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE)
I.S. EN 754-1:2016 ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
BS EN 1999-1-1 : 2007 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES
I.S. EN 1999-1-1:2007 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES (INCLUDING IRISH NATIONAL ANNEX)
ONORM EN 754-1 : 2008 ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
DIN EN 15088 E : 2006 ALUMINIUM AND ALUMINIUM ALLOYS - STRUCTURAL PRODUCTS FOR CONSTRUCTION WORKS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
I.S. EN 570:2007 ALUMINIUM AND ALUMINIUM ALLOYS - IMPACT EXTRUSION SLUGS OBTAINED FROM WROUGHT PRODUCTS - SPECIFICATIONS
I.S. EN 754-8:2016 ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 8: PORTHOLE TUBES, TOLERANCES ON DIMENSIONS AND FORM
I.S. EN 13195-1:2002 ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT AND CAST PRODU- PART 1: SPECIFICATIONS (SHIPBUILDING, MARINE AND OFFSHORE)
I.S. EN 12392:2016 ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT
DIN EN 1999-1-1:2014-03 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES
05/30133060 DC : 0 EN 1090-3 - EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES
PREN 754-1 : DRAFT 2015 ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
15/30324460 DC : 0 BS EN 754-1 - ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
EN 1090-3:2008 Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures
DIN EN 12392:2016-08 Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment
DIN EN 573-5:2007-11 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 5: Codification of standardized wrought products
DIN EN 754-1:2016-10 ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
BS EN 13195-1:2002 Aluminium and aluminium alloys. Wrought and cast products for marine applications (shipbuilding, marine and offshore) Specifications
UNE-EN 754-8:2016 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes, tolerances on dimensions and form
BS EN 754-8:2016 Aluminium and aluminium alloys. Cold drawn rod/bar and tube Porthole tubes, tolerances on dimensions and form
EN 1999-1-1:2007/A2:2013 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES
UNI EN 13958 : 2009 ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN, ROUND, COILED TUBE FOR GENERAL APPLICATIONS - SPECIFICATION
UNI EN 754-8 : 2008 ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 8: PORTHOLE TUBES, TOLERANCES ON DIMENSIONS AND FORM
UNI EN 1999-1-1 : 2014 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES
BS EN 1090-3:2008 Execution of steel structures and aluminium structures Technical requirements for aluminium structures
17/30348949 DC : 0 BS EN 1090-3 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
EN 754-1:2016 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery
I.S. EN 13195:2013 ALUMINIUM AND ALUMINIUM ALLOYS - SPECIFICATIONS FOR WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE)
BS EN 12392:2016 Aluminium and aluminium alloys. Wrought products and cast products. Special requirements for products intended for the production of pressure equipment
UNE-EN 754-1:2016 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery
UNE-EN 13958:2010 Aluminium and aluminium alloys - Cold drawn, round, coiled tube for general applications - Specification
DIN EN 15088:2016-09 (Draft) Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery; German and English version prEN 15088:2016
BS EN 15088:2005 Aluminium and aluminium alloys. Structural products for construction works. Technical conditions for inspection and delivery
EN 15088:2005 Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery
EN 570:2007 Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specification
EN 573-5:2007 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 5: Codification of standardized wrought products
EN 754-8:2016 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes, tolerances on dimensions and form
BS EN 13195:2013 Aluminium and aluminium alloys. Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore)
04/30125694 DC : DRAFT NOV 2004 EN 15088 - ALUMINIUM AND ALUMINIUM ALLOYS - STRUCTURAL PRODUCTS FOR CONSTRUCTION WORKS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
DIN EN 1090-3:2008-09 EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES
UNE-EN 1090-3:2011 Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures
BS EN 573-5:2007 Aluminium and aluminium alloys. Chemical composition and form of wrought products Codification of standardized wrought products
BS EN 570:2007 Aluminium and aluminium alloys. Impact extrusion slugs obtained from wrought products. Specification
DIN EN 15088:2006-03 Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery; German version EN 15088:2005
DIN EN 570:2007-04 Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specification

EN 754-1:2016 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery
EN 13958:2008 Aluminium and aluminium alloys - Cold drawn, round, coiled tube for general applications - Specification
EN 515:2017 Aluminium and aluminium alloys - Wrought products - Temper designations
EN 754-8:2016 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes, tolerances on dimensions and form

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.