• There are no items in your cart

EN 817:2008

Current
Current

The latest, up-to-date edition.

Sanitary tapware - Mechanical mixing valves (PN 10) - General technical specifications
Published date

06-25-2008

Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and designation
   3.1 Terms and definitions
   3.2 Designation
4 Marking and identification
   4.1 Marking
   4.2 Identification
5 Materials
   5.1 Chemical and hygiene requirements
   5.2 Exposed surface conditions
6 Dimensional characteristics
   6.1 General remarks
   6.2 Inlet dimensions
   6.3 Outlet dimensions
   6.4 Mounting dimensions
   6.5 Special cases
   6.6 Flexible hoses for shower outlets
   6.7 Shower outlets
7 Sequence of testing
8 Leaktightness characteristics
   8.1 General
   8.2 Test methods
   8.3 Leaktightness of the obturator and of the mixing valve
        upstream of the obturators with the obturator in the closed
        position
   8.4 Leaktightness of the mixing valve downstream of the
        obturator with the obturator open
   8.5 Leaktightness of manually operated diverter
   8.6 Leaktightness and operation of diverter with automatic return
   8.7 Leaktightness of the obturator: cross flow between hot
        water and cold water
9 Pressure resistance characteristics - mechanical performance
   under pressure
   9.1 General
   9.2 Principle
   9.3 Apparatus
   9.4 Mechanical behaviour upstream of the obturator -
        obturator in the closed position
   9.5 Mechanical behaviour downstream of the obturator -
        obturator in the open position
10 Hydraulic characteristics
   10.1 General
   10.2 Initial settings
   10.3 Principle
   10.4 Apparatus
   10.5 Procedure
   10.6 Determination of flow rate
   10.7 Determination of sensitivity
11 Mechanical strength characteristics - torsion test for
   operating mechanism
   11.1 General
   11.2 Test method
12 Mechanical endurance characteristics
   12.1 Mechanical endurance of the control device
   12.2 Mechanical endurance of diverters
   12.3 Mechanical endurance of swivel spouts
13 Backflow protection
14 Acoustic characteristics
   14.1 General
   14.2 Procedure
   14.3 Requirements
Annex A (informative) Apparatus
Annex B (informative) Pressure take-off tee
Bibliography

This European Standard specifies:the dimensional, leaktightness, pressure resistance, hydraulic performance, mechanical strength, endurance and acoustic characteristics with which mechanical mixing valves need to comply;test methods to verify the characteristics;the tests described in this European Standard are type tests (laboratory tests) and not quality control tests carried out during manufacture.This European Standard applies to PN 10 mechanical mixing valves for use with sanitary appliances installed in rooms used for bodily hygiene (cloakrooms, bathrooms, etc.) and in kitchens, i.e. for use with baths, wash basins, bidets, showers and sinks.The conditions of use and classifications are given in Table 1.Table 1- Conditions of use/classifications

Committee
CEN/TC 164
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

Standards Relationship
NS EN 817 : 2ED 2008 Identical
DIN EN 817:2008-09 Identical
I.S. EN 817:2008 Identical
NEN EN 817 : 2008 Identical
BS EN 817:2008 Identical
PN EN 817 : 2008 Identical
SN EN 817 : 2008 Identical
UNE-EN 817:2009 Identical
UNI EN 817 : 2008 Identical
NBN EN 817 : 2008 Identical
NF EN 817 : 2008 Identical

BS EN 16146 : 2012 SANITARY TAPWARE - EXTRACTABLE SHOWER HOSES FOR SANITARY TAPWARE FOR SUPPLY SYSTEMS TYPE 1 AND TYPE 2 - GENERAL TECHNICAL SPECIFICATION
DIN EN 15200:2007-08 SANITARY APPLIANCES - MULTIFUNCTION SHOWER CABINETS
EN 1286:1999 Sanitary tapware - Low pressure mechanical mixing valves - General technical specification
BS EN 14506:2005 Devices to prevent pollution by backflow of potable water. Automatic diverter. Family H, type C
DIN EN 16145:2013-03 Sanitary tapware - Extractable outlets for sink and basin mixers - General technical specification
DIN EN 14506 E : 2005 DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - AUTOMATIC DIVERTER - FAMILY H, TYPE C
I.S. EN 14506:2005 DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - AUTOMATIC DIVERTER - FAMILY H, TYPE C
I.S. EN 16145:2012 SANITARY TAPWARE - EXTRACTABLE OUTLETS FOR SINK AND BASIN MIXERS - GENERAL TECHNICAL SPECIFICATION
UNI EN 16145 : 2013 SANITARY TAPWARE - EXTRACTABLE OUTLETS FOR SINK AND BASIN MIXERS - GENERAL TECHNICAL SPECIFICATION
10/30228910 DC : 0 BS EN 16146 - SANITARY TAPWARE - EXTRACTABLE SHOWER HOSES FOR SANITARY TAPWARE FOR SUPPLY SYSTEMS TYPE 1 AND TYPE 2 - GENERAL TECHNICAL SPECIFICATION
10/30228907 DC : 0 BS EN 16145 - SANITARY TAPWARE - EXTRACTABLE OUTLETS FOR SINK AND BASIN MIXERS - GENERAL TECHNICAL SPECIFICATION
05/30132908 DC : DRAFT APR 2005 EN 15200 - SANITARY APPLIANCES - MULTIFUNCTION SHOWER CABINETS
UNI EN 806-4 : 2010 SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4: INSTALLATION
BS EN 806-4:2010 Specifications for installations inside buildings conveying water for human consumption Installation
NF EN 806-4 : 2010 SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4: INSTALLATION
UNI EN 15200 : 2007 SANITARY APPLIANCES - MULTIFUNCTION SHOWER CABINETS
BS EN 16145:2012 Sanitary tapware. Extractable outlets for sink and basin mixers. General technical specification
DIN EN 806-4:2010-06 Specifications for installations inside buildings conveying water for human consumption - Part 4: Installation
DIN EN 16146:2015-02 Sanitary tapware - Extractable shower hoses for sanitary tapware for supply systems type 1 and type 2 - General technical specification; German version EN 16146:2012+A1:2014
I.S. EN 16146:2012 SANITARY TAPWARE - EXTRACTABLE SHOWER HOSES FOR SANITARY TAPWARE FOR SUPPLY SYSTEMS TYPE 1 AND TYPE 2 - GENERAL TECHNICAL SPECIFICATION
I.S. EN 806-4:2010 SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4: INSTALLATION
DIN EN 15200 E : 2007 SANITARY APPLIANCES - MULTIFUNCTION SHOWER CABINETS
BS EN 15200:2007 Sanitary appliances. Multifunction shower cabinets
EN 15200:2007/AC:2009 SANITARY APPLIANCES - MULTIFUNCTION SHOWER CABINETS
EN 806-4:2010 Specifications for installations inside buildings conveying water for human consumption - Part 4: Installation
EN 16145:2012 Sanitary tapware - Extractable outlets for sink and basin mixers - General technical specification
EN 14506:2005 Devices to prevent pollution by backflow of potable water - Automatic diverter - Family H, type C
EN 16146:2012+A1:2014 Sanitary tapware - Extractable shower hoses for sanitary tapware for supply systems type 1 and type 2 - General technical specification
UNE-EN 16145:2014 Sanitary tapware - Extractable outlets for sink and basin mixers - General technical specification
UNI EN 16146 : 2014 SANITARY TAPWARE - EXTRACTABLE SHOWER HOSES FOR SANITARY TAPWARE FOR SUPPLY SYSTEMS TYPE 1 AND TYPE 2 - GENERAL TECHNICAL SPECIFICATION
BS EN 1286:1999 Sanitary tapware. Low pressure mechanical mixing valves. General technical specification
DIN EN 14506:2005-08 Devices to prevent pollution by backflow of potable water - Automatic diverter - Family H, type C
UNE-EN 16146:2013 Sanitary tapware - Extractable shower hoses for sanitary tapware for supply systems type 1 and type 2 - General technical specification

ISO 3822-1:1999 Acoustics Laboratory tests on noise emission from appliances and equipment used in water supply installations Part 1: Method of measurement
EN 246:2003 Sanitary tapware - General specifications for flow rate regulators
EN 1112:2008 Sanitary tapware - Shower outlets for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification
EN 1254-2:1998 Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes
EN 1113:2015 SANITARY TAPWARE - SHOWER HOSES FOR SANITARY TAPWARE FOR WATER SUPPLY SYSTEMS OF TYPE 1 AND TYPE 2 - GENERAL TECHNICAL SPECIFICATION
ISO 3822-4:1997 Acoustics Laboratory tests on noise emission from appliances and equipment used in water supply installations Part 4: Mounting and operating conditions for special appliances
EN 1286:1999 Sanitary tapware - Low pressure mechanical mixing valves - General technical specification
EN 1717:2000 Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow
EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
EN ISO 3822-4:1997 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 4: Mounting and operating conditions for special appliances
EN 14506:2005 Devices to prevent pollution by backflow of potable water - Automatic diverter - Family H, type C
EN ISO 5167-1:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2003)
ISO 3822-2:1995 Acoustics Laboratory tests on noise emission from appliances and equipment used in water supply installations Part 2: Mounting and operating conditions for draw-off taps and mixing valves
ISO 5167-1:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements
EN ISO 3822-1:1999/A1:2008 ACOUSTICS - LABORATORY TESTS ON NOISE EMISSION FROM APPLIANCES AND EQUIPMENT USED IN WATER SUPPLY INSTALLATIONS - PART 1: METHOD OF MEASUREMENT
EN ISO 3822-2:1995 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 2: Mounting and operating conditions for draw-off taps and mixing valves (ISO 3822-2:1995)
ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
EN 248:2002 Sanitary tapware - General specification for electrodeposited coatings of Ni-Cr

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.