• There are no items in your cart

EN ISO 11890-1:2007

Current
Current

The latest, up-to-date edition.

Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007)
Published date

07-01-2007

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Required supplementary information
6 Sampling
7 Procedure
8 Calculation
9 Expression of results
10 Precision
11 Test report
Annex A (normative) - Required supplementary information
Bibliography

ISO 11890-1:2007 is one of a series of standards dealing with the sampling and testing of paints, varnishes and related products.It specifies a method for the determination of the volatile organic compound (VOC) content of paints, varnishes and their raw materials. This part may be used where the expected VOC content is greater than 15 % by mass. When the expected VOC content is greater than 0,1 % by mass and less than 15 % by mass, ISO 11890-2 should be employed.This method assumes that the volatile matter is either water or organic. However, other volatile inorganic compounds can be present and might need to be quantified by another suitable method and allowed for in the calculations.

Committee
CEN/TC 139
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

17/30371343 DC : 0 BS EN 4688 - AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING EPOXY PRIMER - HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION
UNI EN 16402 : 2013 PAINTS AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING
13/30283761 DC : 0 BS EN 14468-1 - TABLE TENNIS - PART 1: TABLE TENNIS TABLES, FUNCTIONAL AND SAFETY REQUIREMENTS, TEST METHODS
PREN 14468-1 : DRAFT 2013 TABLE TENNIS - PART 1: TABLE TENNIS TABLES, FUNCTIONAL AND SAFETY REQUIREMENTS, TEST METHODS
PD CEN/TS 16516:2013 Construction products. Assessment of release of dangerous substances. Determination of emissions into indoor air
BS EN 4687:2012 Aerospace series. Paints and varnishes. Chromate free non corrosion inhibiting two components cold curing primer for military application
PREN 4689 : 200P1 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION
I.S. EN 4595:2013 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUBSONIC EROSION RESISTANCE
17/30362165 DC : 0 BS EN 16402 - PAINTS AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING
UNI EN 4689 : 2013 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION
BS EN 16402:2013 Paints and varnishes. Assessment of emissions of substances from coatings into indoor air. Sampling, conditioning and testing
BS EN 4689:2012 Aerospace series. Paints and varnishes. Two components cold curing polyurethane finish. High flexibility and chemical agent resistance for military application
BS EN 16516:2017 Construction products: Assessment of release of dangerous substances. Determination of emissions into indoor air
BS EN 60464-2:2001 Varnishes used for electrical insulation Methods of test
I.S. EN 4476:2011 AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT
I.S. EN 16516:2017 CONSTRUCTION PRODUCTS: ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - DETERMINATION OF EMISSIONS INTO INDOOR AIR
I.S. EN 3840:2007 AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION
PREN 3840 : 200P2 AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION
UNI EN 4688 : 2013 AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION
I.S. EN 14468-1:2015 TABLE TENNIS - PART 1: TABLE TENNIS TABLES, FUNCTIONAL AND SAFETY REQUIREMENTS, TEST METHODS
UNI EN 4687 : 2013 AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION
EN 4689:2012 Aerospace series - Paints and varnishes - Two components cold curing polyurethane finish - High flexibility and chemical agent resistance for military application
EN 4687:2012 Aerospace series - Paints and varnishes - Chromate free non corrosion inhibiting two components cold curing primer for military application
EN 4688:2012 Aerospace series - Paints and varnishes - Corrosion inhibiting two components cold curing primer for military application
VDI 3456:2009-12 Emission control - Refinishing and finishing of vehicles
VDI 3455:2013-08 Emission control - High-volume car body painting plants
DIN EN 16402 E : 2014 PAINTS AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING
BS EN 4595:2013 Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. Subsonic erosion resistance
17/30371341 DC : 0 PREN 4687 - AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE (NON CORROSION INHIBITING) TWO COMPONENT COLD CURING PRIMER - CHROMATE FREE PRIMER FOR MILITARY APPLICATION
17/30371344 DC : 0 BS EN 4689 - AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION
I.S. EN 4688:2012 AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION
UNI EN 4594 : 2013 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUPERSONIC EROSION RESISTANCE
UNI EN 4476 : 2012 AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT
EN 16402:2013 Paints and varnishes - Assessment of emissions of substances from coatings into indoor air - Sampling, conditioning and testing
DIN EN 14468-1:2015-05 Table tennis - Part 1: Table tennis tables, functional and safety requirements, test methods; German version EN 14468-1:2015
EN 16516:2017 Construction products: Assessment of release of dangerous substances - Determination of emissions into indoor air
I.S. EN 16402:2013 PAINTS AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING
BS EN 4594:2013 Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. Supersonic erosion resistance
15/30322088 DC : 0 BS EN 16516 - CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - DETERMINATION OF EMISSIONS INTO INDOOR AIR
S.R. CEN/TS 16516:2013 CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - DETERMINATION OF EMISSIONS INTO INDOOR AIR
UNI CEN/TS 16516 : 2013 CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - DETERMINATION OF EMISSIONS INTO INDOOR AIR
PREN 4688 : 200P1 AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION
PREN 4687 : 200P1 AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION
BS EN 14468-1:2015 Table tennis Table tennis tables, functional and safety requirements, test methods
UNE-EN 14468-1:2015 Table tennis - Part 1: Table tennis tables, functional and safety requirements, test methods
EN 4476:2011 Aerospace series - Paints and varnishes - Cold curing intermediate coat
EN 14468-1:2015 Table tennis - Part 1: Table tennis tables, functional and safety requirements, test methods
EN 4594:2013 Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Supersonic erosion resistance
EN 3840:2007 Aerospace series - Paints and varnishes - Technical specification
EN 4595:2013 Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Subsonic erosion resistance
I.S. EN 4594:2013 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUPERSONIC EROSION RESISTANCE
12/30258159 DC : 0 BS EN 16402 - PAINT AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING
UNI EN 4595 : 2013 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUBSONIC EROSION RESISTANCE
I.S. EN 4689:2012 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION
BS EN 4688:2012 Aerospace series. Paints and varnishes. Corrosion inhibiting two components cold curing primer for military application
17/30371000 DC : 0 BS EN 4476 - AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT
BS EN 3840:2007 Aerospace series. Paints and varnishes. Technical specification
BS EN 4476:2011 Aerospace series. Paints and varnishes. Cold curing intermediate coat
I.S. EN 4687:2012 AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION
PREN 4476 : 200P1 AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT
UNE-EN 16402:2014 Paints and varnishes - Assessment of emissions of substances from coatings into indoor air - Sampling, conditioning and testing
CEN/TS 16516:2013 Construction products - Assessment of release of dangerous substances - Determination of emissions into indoor air
EN 60464-2:2001/A1:2006 VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
DIN EN 16402:2014-02 PAINTS AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING

ISO 2811-1:2016 Paints and varnishes — Determination of density — Part 1: Pycnometer method
ISO 5725-1:1994 Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions
ISO 2811-3:2011 Paints and varnishes — Determination of density — Part 3: Oscillation method
ISO 15528:2013 Paints, varnishes and raw materials for paints and varnishes Sampling
ISO 2811-2:2011 Paints and varnishes Determination of density Part 2: Immersed body (plummet) method
ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
ISO 4618:2014 Paints and varnishes — Terms and definitions
ISO 2811-4:2011 Paints and varnishes Determination of density Part 4: Pressure cup method
ISO 1513:2010 Paints and varnishes Examination and preparation of test samples
ISO 3251:2008 Paints, varnishes and plastics Determination of non-volatile-matter content
ISO 3270:1984 Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing
ISO 11890-2:2013 Paints and varnishes Determination of volatile organic compound (VOC) content Part 2: Gas-chromatographic method
ISO 760:1978 Determination of water Karl Fischer method (General method)

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.