• There are no items in your cart

EN ISO 11960:2014

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014)
Superseded date

05-04-2021

Published date

01-12-2013

Foreword
Introduction
1 Scope
2 Conformance
3 Normative references
4 Terms, definitions, symbols and abbreviated terms
5 Information to be supplied by the purchaser
6 Process of manufacture
7 Material requirements
8 Dimensions, masses, tolerances, product ends
   and defects
9 Couplings
10 Inspection and testing
11 Marking
12 Coating and protection
13 Documents
14 Minimum facility requirements for various
   categories of manufacturer
Annex A (normative) - Supplementary requirements
Annex B (normative) - Purchaser inspection
Annex C (normative) - Tables in SI units
Annex D (normative) - Figures in SI (USC) units
Annex E (normative) - Tables in USC units
Annex F (normative) - Use of the API Monogram by
        Licensees
Annex G (informative) - Procedures used to convert
        from USC units to SI units
Annex H (normative) - Product Specification Levels
Annex I (normative) - Requirements for thread protector
        design validation
Annex J (informative) - Summary of Product Specification
        Level (PSL) requirements
Annex K (normative) - Modification of the hydrogen sulfide
        titration procedures in ANSI-NACE TM0284-2003,
        Appendix C
Annex L (informative) - Technical changes from the previous
         edition
Bibliography

Describes the technical delivery conditions for steel pipes (casing, tubing and pup joints), coupling stock, coupling material and accessory material and establishes requirements for three product specification levels (PSL-1, PSL-2, PSL-3).

Committee
TC 67
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy

PREN 14199 : DRAFT 2013 EXECUTION OF SPECIAL GEOTECHNICAL WORK - MICROPILES
13/30280743 DC : 0 BS EN 14199 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - MICROPILES
BS EN 1918-4:1998 Gas supply systems. Underground gas storage Functional recommendations for storage in rock caverns
BS EN 12699:2015 Execution of special geotechnical works. Displacement piles
I.S. EN 12699:2015 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DISPLACEMENT PILES
EN 10220:2002 Seamless and welded steel tubes - Dimensions and masses per unit length
I.S. EN 10220:2002 SEAMLESS AND WELDED STEEL TUBES - DIMENSIONS AND MASSES PER UNIT LENGTH
DIN EN 12699:2015-07 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DISPLACEMENT PILES
DIN EN 14199:2015-07 EXECUTION OF SPECIAL GEOTECHNICAL WORK - MICROPILES
BS EN 10220:2002 Seamless and welded steel tubes. Dimensions and masses per unit length
BS EN 1918-3:1998 Gas supply systems. Underground gas storage Functional recommendations for storage in solution-mined salt cavities
I.S. EN 1918-1:2016 GAS INFRASTRUCTURE - UNDERGROUND GAS STORAGE - PART 1: FUNCTIONAL RECOMMENDATIONS FOR STORAGE IN AQUIFERS
I.S. EN 1918-3:2016 GAS INFRASTRUCTURE - UNDERGROUND GAS STORAGE - PART 3: FUNCTIONAL RECOMMENDATIONS FOR STORAGE IN SOLUTIONMINED SALT CAVERNS
I.S. EN 1918-2:2016 GAS INFRASTRUCTURE - UNDERGROUND GAS STORAGE - PART 2: FUNCTIONAL RECOMMENDATIONS FOR STORAGE IN OIL AND GAS FIELDS
I.S. EN 14199:2015 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - MICROPILES
I.S. EN 1918-4:2016 GAS INFRASTRUCTURE - UNDERGROUND GAS STORAGE - PART 4: FUNCTIONAL RECOMMENDATIONS FOR STORAGE IN ROCK CAVERNS
14/30298608 DC : 0 BS EN 1918-5 - GAS INFRASTRUCTURE - UNDERGROUND GAS STORAGE - PART 5: FUNCTIONAL REQUIREMENTS FOR SURFACE FACILITIES
13/30284484 DC : 0 BS CISPR 14-1 ED 6 - REQUIREMENTS FOR HOUSEHOLD APPLIANCES, ELECTRIC TOOLS AND SIMILAR APPARATUS - PART 1: EMISSION
PREN 1918-2 : DRAFT 2014 GAS INFRASTRUCTURE - UNDERGROUND GAS STORAGE - PART 2: FUNCTIONAL REQUIREMENTS FOR STORAGE IN OIL AND GAS FIELDS
PREN 1918-5 : DRAFT 2014 GAS INFRASTRUCTURE - UNDERGROUND GAS STORAGE - PART 5: FUNCTIONAL REQUIREMENTS FOR SURFACE FACILITIES
BS EN 1918-2:1998 Gas supply systems. Underground gas storage Functional recommendations for storage in oil and gas fields
03/305165 DC : DRAFT MAR 2003 ISO 17078-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS
14/30298596 DC : 0 BS EN 1918-2 - GAS INFRASTRUCTURE - UNDERGROUND GAS STORAGE - PART 2: FUNCTIONAL REQUIREMENTS FOR STORAGE IN OIL AND GAS FIELDS
BS EN 1918-1:2016 Gas infrastructure. Underground gas storage Functional recommendations for storage in aquifers
EN 1918-3:2016 Gas infrastructure - Underground gas storage - Part 3: Functional recommendations for storage in solution-mined salt caverns
EN 1918-2:2016 Gas infrastructure - Underground gas storage - Part 2: Functional recommendations for storage in oil and gas fields
EN 1918-4:2016 Gas infrastructure - Underground gas storage - Part 4: Functional recommendations for storage in rock caverns
EN 14199:2015 Execution of special geotechnical works - Micropiles
EN 1918-1:2016 Gas infrastructure - Underground gas storage - Part 1: Functional recommendations for storage in aquifers
BS EN 14199:2015 Execution of special geotechnical works. Micropiles
EN 12699:2015 Execution of special geotechnical works - Displacement piles

ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
API 5T1 : 2017 IMPERFECTION AND DEFECT TERMINOLOGY
ISO 10893-3:2011 Non-destructive testing of steel tubes Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections
ISO 10893-5:2011 Non-destructive testing of steel tubes Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections
ISO 6506-1:2014 Metallic materials Brinell hardness test Part 1: Test method
ISO 8501-1:2007 Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
ASNT SNT TC 1A : 2016 TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL
ASTM E 309 : 2016 : REDLINE Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation
ISO/TR 9769:1991 Steel and iron Review of available methods of analysis
API 5CT : 2012 CASING AND TUBING
MIL-STD-810 Revision G:2008 ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
NACE TM 02 84 : 2016 EVALUATION OF PIPELINE AND PRESSURE VESSEL STEELS FOR RESISTANCE TO HYDROGEN-INDUCED CRACKING
ISO 6508-1:2016 Metallic materials — Rockwell hardness test — Part 1: Test method
ASTM E 273 : 2015 : REDLINE Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing
ISO 6892-1:2016 Metallic materials Tensile testing Part 1: Method of test at room temperature
NACE TM 01 77 : 2016 LABORATORY TESTING OF METALS FOR RESISTANCE TO SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING IN H[2]S ENVIRONMENTS
ISO 10893-11:2011 Non-destructive testing of steel tubes Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections
ASTM E 83 : 2016 : REDLINE Standard Practice for Verification and Classification of Extensometer Systems
API 5A2 : 6ED 88 BULLETIN ON THREAD COMPOUNDS FOR CASING, TUBING AND LINE PIPE
ASTM E 10 : 2017-05 TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS
ISO/IEC 17011:2004 Conformity assessment General requirements for accreditation bodies accrediting conformity assessment bodies
ISO 9513:2012 Metallic materials — Calibration of extensometer systems used in uniaxial testing
ISO 6508-2:2015 Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters
ISO 15156-2:2015 Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons
ISO 13678:2010 Petroleum and natural gas industries Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements
API Q1 : 2013 SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR MANUFACTURING ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRY
API 5A3 : 2011 RECOMMENDED PRACTICE ON THREAD COMPOUNDS FOR CASING, TUBING, LINE PIPE, AND DRILL STEM ELEMENTS
ISO 80000-1:2009 Quantities and units — Part 1: General
ISO 643:2012 Steels Micrographic determination of the apparent grain size
ISO 11484:2009 Steel products — Employer's qualification system for non-destructive testing (NDT) personnel
ISO 6506-2:2017 Metallic materials Brinell hardness test Part 2: Verification and calibration of testing machines
ISO/TR 10400:2007 Petroleum and natural gas industries Equations and calculations for the properties of casing, tubing, drill pipe and line pipe used as casing or tubing
ISO 7500-1:2015 Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system
ASTM E 543 : 2015 : REDLINE Standard Specification for Agencies Performing Nondestructive Testing
ASTM E 709 : 2015 : REDLINE Standard Guide for Magnetic Particle Testing
ISO 10893-2:2011 Non-destructive testing of steel tubes Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
API TR 5C3 : 2008 CALCULATING PERFORMANCE PROPERTIES OF PIPE USED AS CASING OR TUBING
ISO 10893-10:2011 Non-destructive testing of steel tubes Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.