• There are no items in your cart

EN ISO 12944-9:2018

Current
Current

The latest, up-to-date edition.

Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures (ISO 12944-9:2018)
Published date

02-14-2018

European foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Field of application
5 Relationship between artificial ageing
   and natural exposure
6 Paints
7 Protective paint systems
8 Application testing of paints
9 Performance testing of the paint system
10 Test report
Annex A (normative) - Scribe line for cyclic ageing
        test and sea water immersion
Annex B (normative) - Cyclic ageing test
Annex C (normative) - Fingerprint
Annex D (informative) - Examples of test reports
Bibliography

ISO 12944-9:2018 specifies the performance requirements for protective paint systems for offshore and related structures (i.e. those exposed to the marine atmosphere, as well as those immersed in sea or brackish water). Such structures are exposed to environments of corrosivity category CX (offshore) and immersion category Im4 as defined in ISO 12944‑2.ISO 12944-9:2018 describes paint systems for high durability according to ISO 12944‑1.ISO 12944-9:2018 is applicable to structures made of carbon steel and does not cover Cd/Bi Cr and Zn/Bi Cr surfaces. It is not applicable to surfaces under insulation or concrete.This document is applicable for paint systems intended for a service temperature range between −20 °C and +80 °C, and the performance testing is aimed at verifying suitability of the paint systems for this temperature range.ISO 12944-9:2018 is applicable for paint systems for submerged service (Im4) which are intended for ambient operating temperatures up to a maximum of 50 °C.ISO 12944-9:2018 specifies:- the test methods to be used to determine the composition of the separate components of the protective paint system;- the laboratory performance test methods for the assessment of the likely durability of the protective paint system;- the criteria to be used to evaluate the results of performance tests.ISO 12944-9:2018 covers the requirements for new work and any repairs necessary before start-up. It can also be used in relation to maintenance where complete refurbishment is carried out and the underlying metal substrate is completely exposed by abrasive blast-cleaning.ISO 12944-9:2018 does not address maintenance in general where methods of surface preparation other than abrasive blast-cleaning are typically used.ISO 12944-9:2018 deals with structures, made of carbon steel of not less than 3 mm thickness, which are designed using an approved strength calculation.The following are not covered by this document:- structures built of stainless steel as well as those built of copper, titanium or aluminium or their alloys;- steel cables;- buried structures;- pipelines;- the interiors of storage tanks.

Committee
CEN/TC 139
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

ISO 1514:2016 Paints and varnishes — Standard panels for testing
ISO 19840:2012 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces
ISO 2114:2000 Plastics (polyester resins) and paints and varnishes (binders) Determination of partial acid value and total acid value
ISO 2812-2:2007 Paints and varnishes Determination of resistance to liquids Part 2: Water immersion method
ISO 15711:2003 Paints and varnishes — Determination of resistance to cathodic disbonding of coatings exposed to sea water
ISO 8501-1:2007 Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
ISO 3549:1995 Zinc dust pigments for paints — Specifications and test methods
ISO 6745:1990 Zinc phosphate pigments for paints — Specifications and methods of test
ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel — Comparator procedure
ISO 12944-5:2007 Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 5: Protective paint systems
ISO 4628-8:2012 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect
ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods
ISO 16474-3:2013 Paints and varnishes Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps
NFT 30 012 : 2017 PAINTS AND VARNISHES - DETERMINATION OF ASH CONTENT IN VARNISHES, PAINTS AND SIMILAR PRODUCTS
ISO 4628-4:2016 Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 4: Assessment of degree of cracking
ISO 11909:2007 Binders for paints and varnishes — Polyisocyanate resins — General methods of test
ISO 4628-3:2016 Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 3: Assessment of degree of rusting
ISO 4624:2016 Paints and varnishes — Pull-off test for adhesion
ISO 12944-2:2017 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments
ISO 12944-1:2017 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction
ISO 12944-8:2017 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 8: Development of specifications for new work and maintenance
ISO 11908:1996 Binders for paints and varnishes — Amino resins — General methods of test
ISO 4628-5:2016 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking
ISO 9117-3:2010 Paints and varnishes — Drying tests — Part 3: Surface-drying test using ballotini
ISO 29601:2011 Paints and varnishes Corrosion protection by protective paint systems Assessment of porosity in a dry film
ISO 8044:2015 Corrosion of metals and alloys Basic terms and definitions
ISO 1248:2006 Iron oxide pigments Specifications and methods of test
ISO 12944-4:2017 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation
ISO 4618:2014 Paints and varnishes — Terms and definitions
ISO 9227:2017 Corrosion tests in artificial atmospheres — Salt spray tests
ISO 3251:2008 Paints, varnishes and plastics Determination of non-volatile-matter content
ISO 4628-6:2011 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method
ISO 4629:1996 Binders for paints and varnishes Determination of hydroxyl value Titrimetric method
ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
ISO 3270:1984 Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing
ISO 7142:2007 Binders for paints and varnishes — Epoxy resins — General methods of test
ISO 3233-1:2013 Paints and varnishes Determination of the percentage volume of non-volatile matter Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle
ISO 4628-2:2016 Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering
ISO 10601:2007 Micaceous iron oxide pigments for paints Specifications and test methods

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.