EN ISO 140-8 : 1997
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
09-01-2010
01-12-2013
1 Scope
2 Normative references
3 Definitions
4 Equipment
5 Test arrangement
5.1 General arrangement
5.2 Details of test arrangement
5.2.1 Source room
5.2.2 Receiving room
5.2.3 Test floor
5.2.4 Condition of floor surface
5.3 Preparation and installation of test specimen
5.3.1 Classification
5.3.2 Installation
5.3.3 Size and number of specimen
5.4 Influence of temperature and humidity
6 Test procedure and evaluation
6.1 Generation of sound field
6.2 Measurement of impact sound pressure level
6.2.1 Microphone positions
6.2.2 Averaging time
6.3 Frequency range of measurements
6.4 Measurement of reverberation time and evaluation
of the equivalent sound absorption area
6.5 Correction for background noise
6.6 Position of the tapping machine
6.6.1 Adjustment of the tapping machine
6.6.2 Materials of category I
6.6.3 Materials of category II and III
7 Precision
8 Expression of results
9 Test report
Annexes
A Requirements for the tapping machine
B Form for the expression of results
C Bibliography
Defines a procedure for measurement of the acoustic properties of floor coverings from the view-point of reduction of impact noise transmission. Defines a procedure for determination of the noise reducing value of a floor covering under standard test conditions. This test is limited to the definition of methods for the physical measurement of sound originating from an artificial source (standard tapping machine) under laboratory conditions and is not directly related to the subjective significance of the results. Applies to all floor coverings, both single- or multi-layered, as installed on a standard floor. Multi-layered coverings can be factory- or test-site- assembled. Does not provide for allowing the assessing of effectiveness of a floor covering in situ.
| Committee |
TC 126
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NBN EN ISO 140-8 : 1998 | Identical |
| NS EN ISO 140-8 : 1ED 1998 | Identical |
| ISO 140-8:1997 | Identical |
| PN EN ISO 140-8 : 1999 | Identical |
| SN EN ISO 140-8 : 1997 | Identical |
| NF EN ISO 140-8 : 1997 | Identical |
| UNI EN ISO 140-8 : 1999 | Identical |
| I.S. EN ISO 140-8:1998 | Identical |
| UNE-EN ISO 140-8:1998 | Identical |
| BS EN ISO 140-8:1998 | Identical |
| NEN EN ISO 140-8 : 1997 | Identical |
| DIN EN ISO 140-8:1998-03 | Identical |
| I.S. EN 12354-2:2000 | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 2: IMPACT SOUND INSULATION BETWEEN ROOMS |
| 04/30081109 DC : DRAFT JUN 2004 | BS EN ISO 140-16 - ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 16: LABORATORY MEASUREMENT OF THE SOUND REDUCTION INDEX IMPROVEMENT BY ADDITIONAL LINING |
| I.S. EN 13297:2007 | TEXTILE FLOOR COVERINGS - CLASSIFICATION OF NEEDLED PILE FLOOR COVERINGS |
| I.S. EN 12104:2000 | RESILIENT FLOOR COVERINGS - CORK FLOOR TILES - SPECIFICATION |
| PD CEN/TR 15226:2006 | Building products. Treatment of acoustics in product technical specifications |
| 10/30234552 DC : 0 | BS EN 16205 - LABORATORY MEASUREMENT OF WALKING NOISE ON FLOORS |
| I.S. CEN/TR 15226:2006 | BUILDING PRODUCTS - TREATMENT OF ACOUSTICS IN PRODUCT TECHNICAL SPECIFICATIONS |
| EN 12104:2000 | Resilient floor coverings - Cork floor tiles - Specification |
| EN 12103:1999 | Resilient floor coverings - Agglomerated cork underlays - Specification |
| CEN/TR 15226:2006 | Building products - Treatment of acoustics in product technical specifications |
| I.S. CEN TS 15398:2006 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - FLOOR COVERING STANDARD SYMBOLS |
| I.S. EN 16025-1:2013 | THERMAL AND/OR SOUND INSULATING PRODUCTS IN BUILDING CONSTRUCTION - BOUND EPS BALLASTINGS - PART 1: REQUIREMENTS FOR FACTORY PREMIXED EPS DRY PLASTER |
| I.S. EN 1470:2008 | TEXTILE FLOOR COVERINGS - CLASSIFICATION OF NEEDLED FLOOR COVERINGS EXCEPT FOR NEEDLED PILE FLOOR COVERINGS |
| DIN EN 16025-1:2013-07 | THERMAL AND/OR SOUND INSULATING PRODUCTS IN BUILDING CONSTRUCTION - BOUND EPS BALLASTINGS - PART 1: REQUIREMENTS FOR FACTORY PREMIXED EPS DRY PLASTER |
| BS EN 16025-1:2013 | Thermal and/or sound insulating products in building construction. Bound EPS ballastings Requirements for factory premixed EPS dry plaster |
| BS EN ISO 140-6:1998 | Acoustics. Measurement of sound insulation in buildings and of building elements Laboratory measurements of impact sound insulation of floors |
| DIN EN 1470:1998-01 | TEXTILE FLOOR COVERINGS - CLASSIFICATION OF NEEDLED FLOOR COVERINGS EXCEPT FOR NEEDLED PILE FLOOR COVERINGS |
| DIN EN 13297:2000-11 | TEXTILE FLOOR COVERINGS - CLASSIFICATION OF NEEDLED PILE FLOOR COVERINGS |
| UNI EN 1470 : 2008 | TEXTILE FLOOR COVERINGS - CLASSIFICATION OF NEEDLED FLOOR COVERINGS EXCEPT FOR NEEDLED PILE FLOOR COVERINGS |
| UNI EN 16025-1 : 2013 | THERMAL AND/OR SOUND INSULATING PRODUCTS IN BUILDING CONSTRUCTION - BOUND EPS BALLASTINGS - PART 1: REQUIREMENTS FOR FACTORY PREMIXED EPS DRY PLASTER |
| DIN EN 1470:2009-02 | TEXTILE FLOOR COVERINGS - CLASSIFICATION OF NEEDLED FLOOR COVERINGS EXCEPT FOR NEEDLED PILE FLOOR COVERINGS |
| DIN EN 15114:2008-11 | TEXTILE FLOOR COVERINGS - CLASSIFICATION OF TEXTILE FLOOR COVERINGS WITHOUT PILE |
| BS EN 15114 : 2006 | TEXTILE FLOOR COVERINGS - CLASSIFICATION OF TEXTILE FLOOR COVERINGS WITHOUT PILE |
| BS EN 12104:2000 | Resilient floor coverings. Cork floor tiles. Specification |
| UNI EN 15114 : 2008 | TEXTILE FLOOR COVERINGS - CLASSIFICATION OF TEXTILE FLOOR COVERINGS WITHOUT PILE |
| ISO 3813:2004 | Resilient floor coverings Cork floor tiles Specification |
| 06/30155788 DC : DRAFT SEP 2006 | BS EN 13297 - TEXTILE FLOOR COVERINGS - CLASSIFICATION OF NEEDLED PILE FLOOR COVERINGS |
| DD CEN/TS 15398:2006 | Resilient, textile and laminate floor coverings. Floor covering standard symbols |
| 02/124567 DC : DRAFT DEC 2002 | BS ISO 3813 - RESILIENT FLOOR COVERINGS - CORK FLOOR TILES - SPECIFICATION |
| ISO 15712-2:2005 | Building acoustics Estimation of acoustic performance of buildings from the performance of elements Part 2: Impact sound insulation between rooms |
| BS EN 12354-2:2000 | Building acoustics. Estimation of acoustic performance in buildings from the performance of elements Impact sound insulation between rooms |
| BS EN 13297:2007 | Textile floor coverings. Classification of needled pile floor coverings |
| BS EN 12103:1999 | Resilient floor coverings. Agglomerated cork underlays. Specification |
| EN 1470:2008 | Textile floor coverings - Classification of needled floor coverings except for needled pile floor coverings |
| EN 13297:2007/AC:2008 | TEXTILE FLOOR COVERINGS - CLASSIFICATION OF NEEDLED PILE FLOOR COVERINGS |
| EN 15114:2006+A1:2008 | Textile floor coverings - Classification of textile floor coverings without pile |
| EN 16025-1:2013 | Thermal and/or sound insulating products in building construction - Bound EPS ballastings - Part 1: Requirements for factory premixed EPS dry plaster |
| I.S. EN ISO 140-1:1998 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - REQUIREMENTS FOR LABORATORY TEST FACILITIES WITH SUPPRESSED FLANKING TRANSMISSION |
| UNE-EN 16025-1:2016 | Thermal and/or sound insulating products in building construction - Bound EPS ballastings - Part 1: Requirements for factory premixed EPS dry plaster |
| 09/30209668 DC : 0 | BS EN 16025-1 - THERMAL AND/OR SOUND INSULATING PRODUCTS IN BUILDING CONSTRUCTION - BOUND EPS BALLASTINGS - PART 1: REQUIREMENTS FOR FACTORY PREMIXED EPS DRY PLASTER |
| DIN EN 13297:2007-12 | TEXTILE FLOOR COVERINGS - CLASSIFICATION OF NEEDLED PILE FLOOR COVERINGS |
| BS EN 1470:2008 | Textile floor coverings. Classification of needled floor coverings except for needled pile floor coverings |
| DIN EN ISO 140-1:2005-03 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 1: REQUIREMENTS FOR LABORATORY TEST FACILITIES WITH SUPPRESSED FLANKING TRANSMISSION |
| EN 12354-2:2000 | Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 2: Impact sound insulation between rooms |
| ISO 354:2003 | Acoustics — Measurement of sound absorption in a reverberation room |
| ISO 717-2:2013 | Acoustics Rating of sound insulation in buildings and of building elements Part 2: Impact sound insulation |
| ISO 140-6:1998 | Acoustics Measurement of sound insulation in buildings and of building elements Part 6: Laboratory measurements of impact sound insulation of floors |
| IEC 60942:2003 | Electroacoustics - Sound calibrators |
| ISO 140-7:1998 | Acoustics Measurement of sound insulation in buildings and of building elements Part 7: Field measurements of impact sound insulation of floors |
| ISO 140-1:1997 | Acoustics Measurement of sound insulation in buildings and of building elements Part 1: Requirements for laboratory test facilities with suppressed flanking transmission |
| IEC 61260:1995 | Electroacoustics - Octave-band and fractional-octave-band filters |
| IEC 60651:1979+AMD1:1993+AMD2:2000 CSV | Sound level meters |
| IEC 60804:2000 | Integrating-averaging sound level meters |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.