• There are no items in your cart

EN ISO 15610:2003

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO 15610:2003)
Withdrawn date

05-31-2004

Published date

11-15-2003

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Preliminary welding procedure specifications (pWPS)
5 Qualification of the welding procedure
6 Range of qualification
7 Validity
8 Welding Procedure Qualification Record (WPQR)
Bibliography

ISO 15610:2003 gives the necessary information to explain the requirements referenced in ISO 15607 concerning the qualification of welding procedures based on tested consumables. In addition, it gives the range of qualification.ISO 15610:2003 applies to arc and gas welding but other fusion welding processes may be accepted if specified.It is limited to application to parent metals that produce acceptable micro structures and properties in the heat affected zone and which do not deteriorate significantly in service.This International Standard is not applicable where requirements for hardness or impact properties, preheating, controlled heat input, interpass temperature and post-weld heat-treatment are specified for the welded joint.The use of ISO 15610.2003 may also be restricted by an application standard or a specification.

DevelopmentNote
Supersedes EN 288-5 (12/2003)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Withdrawn
Supersedes

09/30211880 DC : 0 BS EN 12732 - GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS
11/30253745 DC : 0 BS EN 14025 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION
11/30246678 DC : 0 BS EN 13480-4 - METALLIC INDUSTRIAL PIPING - PART 4: FABRICATION AND INSTALLATION
I.S. EN 334:2005 GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
BS EN 14917 : 2009 METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
EN 14917:2009+A1:2012 Metal bellows expansion joints for pressure applications
16/30334287 DC : 0 BS EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURE UP TO 100 BAR
17/30360051 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
DIN EN 334:2016-05 (Draft) GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
I.S. EN ISO 15607:2004 SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES
I.S. EN 14382:2005 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
DIN EN 15085-2:2008-01 RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 2: QUALITY REQUIREMENTS AND CERTIFICATION OF WELDING MANUFACTURER
DIN EN 12732:2014-07 Gas infrastructure - Welding steel pipework - Functional requirements (includes Amendment A1:2014)
DIN EN 14382 E : 2009 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
BS EN 14382 : 2005 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
DIN EN 1090-2:2011-10 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
EN 13480-4:2017 Metallic industrial piping - Part 4: Fabrication and installation
UNI EN 12732 : 2014 GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS
I.S. EN 15085-4:2007 RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 4: PRODUCTION REQUIREMENTS
DIN EN 14917:2012-06 Metal bellows expansion joints for pressure applications (includes Amendment A1:2012)
15/30320416 DC : 0 BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
I.S. EN 13611:2015 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
DIN EN 15001-1:2011-02 Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
10/30219381 DC : 0 BS EN 13084-7 - FREE-STANDING CHIMNEYS - PART 7: PRODUCT SPECIFICATIONS OF CYLINDRICAL STEEL FABRICATIONS FOR USE IN SINGLE WALL STEEL CHIMNEYS AND STEEL LINERS
PREN 12732 : DRAFT 2009 GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS
PREN 13480-4 : DRAFT 2011 METALLIC INDUSTRIAL PIPING - PART 4: FABRICATION AND INSTALLATION
PREN 1090-2 : DRAFT 2015 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
UNE-EN 1090-2:2011 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
ONORM EN 334 : JUN 2009 GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
BS EN 1090-2 : 2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
DIN EN 1090-2:2015-07 (Draft) EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
UNI EN 1090-2 : 2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
DIN EN 15085-4:2008-01 Railway applications - Welding of railway vehicles and components - Part 4: Production requirements
BS EN 334 : 2005 GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
DIN EN 1775:2007-10 Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations
DIN EN 13611:2019-06 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
DIN EN 13084-1:2007-05 Free-standing chimneys - Part 1: General requirements
I.S. EN 13480-4:2017 METALLIC INDUSTRIAL PIPING - PART 4: FABRICATION AND INSTALLATION
I.S. EN 12732:2013 GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS
I.S. EN 13084-1:2007 FREE-STANDING CHIMNEYS - PART 1: GENERAL REQUIREMENTS
I.S. EN 14394:2006 HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
I.S. EN 1775:2007 GAS SUPPLY - GAS PIPEWORK FOR BUILDINGS - MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 5 BAR - FUNCTIONAL RECOMMENDATIONS
DIN EN 12732:2000-09 GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS
BIS IS 16003 : 2012 SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES
16/30342040 DC : 0 BS EN 13941-2 - DISTRICT HEATING PIPES - DESIGN AND INSTALLATION OF THERMAL INSULATED BONDED SINGLE AND TWIN PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PART 2: INSTALLATION
NF EN 15001-1 : 2009 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
DIN EN 14917 E : 2012 METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
EN 1090-2:2008+A1:2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
I.S. EN 14917:2009 METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
DIN EN 14394 E : 2008 HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
DIN EN 14394:2008-12 HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
DIN EN 14382:2016-05 (Draft) SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
BS EN 15085-2:2007 Railway applications. Welding of railway vehicles and components Quality requirements and certification of welding manufacturer
I.S. EN 15085-2:2007 RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 2: QUALITY REQUIREMENTS AND CERTIFICATION OF WELDING MANUFACTURER
EN 13094:2015 Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction
EN 15085-2:2007 Railway applications - Welding of railway vehicles and components - Part 2: Quality requirements and certification of welding manufacturer
I.S. EN 13094:2015 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC TANKS WITH A WORKING PRESSURE NOT EXCEEDING 0,5 BAR - DESIGN AND CONSTRUCTION
EN 15085-4:2007 Railway applications - Welding of railway vehicles and components - Part 4: Production requirements
UNI EN 14394 : 2008 HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREES C
UNI EN 1775 : 2007 GAS SUPPLY - GAS PIPEWORK FOR BUILDINGS - MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 5 BAR - FUNCTIONAL RECOMMENDATIONS
UNI EN 15001-1 : 2009 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
UNI EN 14382 : 2009 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
13/30247837 DC : 0 BS EN 13094 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC TANKS WITH A WORKING PRESSURE NOT EXCEEDING 0,5 BAR - DESIGN AND CONSTRUCTION
UNI EN 14917 : 2012 METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
I.S. EN 15001-1:2009 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
NF EN 1090-2 : 2009 + A1 2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
DIN EN 13611:2016-09 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
PREN 13611 : DRAFT 2017 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
DIN EN 13094:2015-07 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC TANKS WITH A WORKING PRESSURE NOT EXCEEDING 0,5 BAR - DESIGN AND CONSTRUCTION
BS EN 14394 : 2005 HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
UNE-EN 15001-1:2010 Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
ISO 15607:2003 Specification and qualification of welding procedures for metallic materials General rules
BS EN 13480-4:2017 Metallic industrial piping Fabrication and installation
UNE-EN 13480-4:2017 Metallic industrial piping - Part 4: Fabrication and installation (Endorsed by Asociación Española de Normalización in September of 2019.)
BS EN 15085-4:2007 Railway applications. Welding of railway vehicles and components Production requirements
BS EN ISO 15607:2003 Specification and qualification of welding procedures for metallic materials. General rules
UNE-EN 13094:2015 Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction
BS EN 12732 : 2013 GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS
UNE-EN 12732:2014+A1:2014 Gas infrastructure - Welding steel pipework - Functional requirements
BS EN 13084-1:2007 Free-standing chimneys General requirements
EN 1775:2007 Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations
EN 14394:2005+A1:2008 Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C
EN 15001-1:2009 Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
EN 14382:2005+A1:2009/AC:2009 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
EN ISO 15607:2003 Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003)
EN 334:2005+A1:2009 Gas pressure regulators for inlet pressures up to 100 bar
12/30257022 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS
BS EN 15001-1:2009 Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing
16/30328759 DC : 0 BS EN 13814-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE
I.S. EN 1090-2:2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
UNI EN 334 : 2009 GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
BS EN 13611:2015 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements
UNE-EN 13611:2016 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
UNE-EN 14917:2011 Metal bellows expansion joints for pressure applications
EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
BS EN 1775:2007 Gas supply. Gas pipework for buildings. Maximum operating pressure less than or equal to 5 bar. Functional recommendations
BS EN 13094:2015 Tanks for the transport of dangerous goods. Metallic tanks with a working pressure not exceeding 0,5 bar. Design and construction
I.S. EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
EN 13084-1:2007 Free-standing chimneys - Part 1: General requirements
DIN EN ISO 15607:2004-03 SPECIFICATION AND QUALIFICATION OF WELDING - PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES
EN 12732:2013+A1:2014 Gas infrastructure - Welding steel pipework - Functional requirements
UNE-EN 12732:2014 Gas infrastructure - Welding steel pipework - Functional requirements

EN 439 : 1994 WELDING CONSUMABLES - SHIELDING GASES FOR ARC WELDING AND CUTTING
ISO/TR 15608:2017 Welding Guidelines for a metallic materials grouping system
CR ISO 15608 : 2000 WELDING - GUIDELINES FOR A METALLIC MATERIAL GROUPING SYSTEM
EN ISO 4063:2010 Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01)
EN ISO 15609-2:2001/A1:2003 SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION - PART 2: GAS WELDING
ISO 14175:2008 Welding consumables — Gases and gas mixtures for fusion welding and allied processes
ISO 15609-2:2001 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 2: Gas welding
ISO 4063:2009 Welding and allied processes — Nomenclature of processes and reference numbers
ISO 15607:2003 Specification and qualification of welding procedures for metallic materials General rules
EN ISO 15607:2003 Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003)

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.