• There are no items in your cart

EN ISO 2813:2014

Current
Current

The latest, up-to-date edition.

Paints and varnishes - Determination of gloss value at 20°, 60° and 85° (ISO 2813:2014)
Published date

10-15-2014

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Basic principles of the gloss measurement
6 Apparatus and calibration equipment
7 Test panels
8 Calibration and adjustment of the glossmeter
9 Procedure
10 Precision
11 Test report
Annex A (normative) - Possible sources of error
Annex B (normative) - Calibration standards
Annex C (informative) - Gloss calculation of primary
        reference standards
Annex D (informative) - Details on precision
Bibliography

ISO 2813:2014 specifies a method for determining the gloss of coatings using the three geometries of 20°, 60° or 85°. The method is suitable for the gloss measurement of non-textured coatings on plane, opaque substrates.

Committee
CEN/TC 139
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

NF EN 10245-5 : 2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE
DIN EN 13245-3:2010-11 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 3: Designation of PVC-UE profiles
14/30303794 DC : 0 BS EN 438-2 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
PREN 438-2 : DRAFT 2014 HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
17/30371343 DC : 0 BS EN 4688 - AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING EPOXY PRIMER - HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION
13/30284424 DC : 0 BS EN 4726 - AEROSPACE SERIES - ACCEPTANCE OF THE COSMETIC VARIATIONS IN APPEARANCE OF AIRCRAFT CABIN PARTS
09/30205921 DC : 0 BS EN 1794-2 - ROAD TRAFFIC NOISE REDUCING DEVICES - NON-ACOUSTIC PERFORMANCE - PART 2: GENERAL SAFETY AND ENVIRONMENTAL REQUIREMENTS
13/30217369 DC : 0 BS EN 13964 - SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
DIN EN 16094:2012-04 Laminate floor coverings - Test method for the determination of micro-scratch resistance
DIN EN 16581 E : 2015 CONSERVATION OF CULTURAL HERITAGE - SURFACE PROTECTION FOR POROUS INORGANIC MATERIALS - LABORATORY TEST METHODS FOR THE EVALUATION OF THE PERFORMANCE OF WATER REPELLENT PRODUCTS
DIN EN 16566:2014-08 PAINTS AND VARNISHES - FILLERS FOR INTERNAL AND/OR EXTERNAL WORKS - ADAPTION OF FILLERS TO EUROPEAN STANDARDS
13/30283761 DC : 0 BS EN 14468-1 - TABLE TENNIS - PART 1: TABLE TENNIS TABLES, FUNCTIONAL AND SAFETY REQUIREMENTS, TEST METHODS
PREN 14468-1 : DRAFT 2013 TABLE TENNIS - PART 1: TABLE TENNIS TABLES, FUNCTIONAL AND SAFETY REQUIREMENTS, TEST METHODS
BS EN 4687:2012 Aerospace series. Paints and varnishes. Chromate free non corrosion inhibiting two components cold curing primer for military application
13/30279323 DC : 0 BS EN 16581 - CONSERVATION OF CULTURAL HERITAGE - SURFACE PROTECTION FOR POROUS INORGANIC MATERIALS - LABORATORY TEST METHODS FOR THE EVALUATION OF THE PERFORMANCE OF WATER REPELLENT PRODUCTS
DIN EN 16587:2013-07 (Draft) RAILWAY APPLICATIONS - DESIGN FOR PRM USE - REQUIREMENTS ON OBSTACLE FREE ROUTES FOR INFRASTRUCTURE
PREN 4689 : 200P1 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION
I.S. EN 4476:2011 AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT
S.R. CEN/TR 16958:2017 ROAD MARKING MATERIALS - CONDITIONS FOR REMOVING/MASKING ROAD MARKINGS
I.S. EN 16094:2012 LAMINATE FLOOR COVERINGS - TEST METHOD FOR THE DETERMINATION OF MICRO-SCRATCH RESISTANCE
I.S. EN 14978:2016 LAMINATE FLOOR COVERINGS - ELEMENTS WITH ACRYLIC BASED SURFACE LAYER, ELECTRON BEAM CURED - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS
I.S. EN 4726:2015 AEROSPACE SERIES - ACCEPTANCE OF THE COSMETIC VARIATIONS IN APPEARANCE OF AIRCRAFT CABIN PARTS
I.S. EN 54-23:2010 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 23: FIRE ALARM DEVICES - VISUAL ALARM DEVICES
17/30344378 DC : 0 BS EN 16186-4 - RAILWAY APPLICATIONS - DRIVER'S CAB - PART 4: LAYOUT AND ACCESS
UNE-EN 16587:2018 Railway Applications - Design for PRM Use - Requirements on Obstacle Free Routes for Infrastructure
I.S. EN 927-3:2012 PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST
DIN EN 14323 E : 2017 WOOD-BASED PANELS - MELAMINE FACED BOARDS FOR INTERIOR USES - TEST METHODS
DIN EN 1062-1:2004-08 Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 1: Classification
BS EN 1794-2:2011 Road traffic noise reducing devices. Non-acoustic performance General safety and environmental requirements
BS EN 13523-2:2014 Coil coated metals. Test methods Gloss
BS EN 12206-1:2004 Paints and varnishes. Coating of aluminium and aluminium alloys for architectural purposes Coatings prepared from coating powder
BS EN 14323:2017 Wood-based panels. Melamine faced boards for interior uses. Test methods
BS EN 13802:2013 Railway applications. Suspension components. Hydraulic dampers
BS EN 14864:2005 Vitreous and porcelain enamels. Enamel coatings applied to steel for writing surfaces. Specification
BS EN 1062-1:2004 Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete Classification
UNI EN 4689 : 2013 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION
DIN EN 13722:2004-10 Furniture - Assessment of the surface gloss; German version EN 13722:2004
DIN EN 14904:2006-06 Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification
EN 10245-1:2011 Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules
CEN/TS 15534-1:2007 Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products
EN 10245-2:2011 Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire
EN 1062-1:2004 Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 1: Classification
EN 10245-3:2011 Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire
EN 10245-5:2011 Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire
EN 13245-3:2010 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 3: Designation of PVC-UE profiles
EN 13523-14:2014 Coil coated metals - Test methods - Part 14: Chalking (Helmen method)
EN 13438:2013 Paints and varnishes - Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes
I.S. EN 13200-4:2006 SPECTATOR FACILITIES - PART 4: SEATS - PRODUCT CHARACTERISTICS
04/30116036 DC : DRAFT JUL 2004 EN 1729-2 - FURNITURE - CHAIRS AND TABLES FOR EDUCATIONAL INSTITUTIONS - PART 2: SAFETY REQUIREMENTS AND TEST METHODS
DIN EN 10245-5:2012-01 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE
CEI EN 61966-9 : 2005 MULTIMEDIA SYSTEMS AND EQUIPMENT - COLOUR MEASUREMENT AND MANAGEMENT - PART 9: DIGITAL CAMERAS
12/30266170 DC : 0 BS EN 15534-1 - COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1 : TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS
NF EN 16094 : 2012 LAMINATE FLOOR COVERINGS - TEST METHOD FOR THE DETERMINATION OF MICRO-SCRATCH RESISTANCE
BS EN 16727-3:2017 Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Non-acoustic performance General safety and environmental requirements
BS EN 4689:2012 Aerospace series. Paints and varnishes. Two components cold curing polyurethane finish. High flexibility and chemical agent resistance for military application
12/30268967 DC : 0 BS EN 13523-14 - COIL COATED METALS - TEST METHODS - PART 14: CHALKING (HELMEN METHOD)
BS EN 10245-5:2011 Steel wire and wire products. Organic coatings on steel wire Polyamide coated wire
EN 12206-1:2004 Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder
BS EN 16566:2014 Paints and varnishes. Fillers for internal and/or external works. Adaptation of fillers to European standards
DIN CEN/TS 16611;DIN SPEC 68264:2016-08 FURNITURE - ASSESSMENT OF THE SURFACE RESISTANCE TO MICROSCRATCHING
14/30310006 DC : 0 BS EN 16727-3 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - NON-ACOUSTIC PERFORMANCE - PART 3: GENERAL SAFETY AND ENVIRONMENTAL REQUIREMENTS
BS EN 16587:2017 Railway applications. Design for PRM Use. Requirements on obstacle free routes for infrastructure
BS EN 15534-1 : 2014 COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS
I.S. EN 12206-1:2004 PAINTS AND VARNISHES - COATING OF ALUMINIUM AND ALUMINIUM ALLOYS FOR ARCHITECTURAL PURPOSES - PART 1: COATINGS PREPARED FROM COATING POWDER
10/30231990 DC : 0 BS EN ISO 28722 - VITREOUS AND PORCELAIN ENAMELS - CHARACTERISTICS OF ENAMEL COATINGS APPLIED TO STEEL PANELS INTENDED FOR ARCHITECTURE
BS EN 16581:2014 Conservation of Cultural Heritage. Surface protection for porous inorganic materials. Laboratory test methods for the evaluation of the performance of water repellent products
UNI EN 16094 : 2012 LAMINATE FLOOR COVERINGS - TEST METHOD FOR THE DETERMINATION OF MICRO-SCRATCH RESISTANCE
16/30345769 DC : 0 BS EN 927-6 - PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 6: EXPOSURE OF WOOD COATINGS TO ARTIFICIAL WEATHERING USING FLUORESCENT UV LAMPS AND WATER
04/19993011 DC : DRAFT JUN 2004 BS EN 14904 - SURFACES FOR SPORTS AREAS - SPECIFICATION FOR INDOOR SURFACES FOR MULTI-SPORTS USE
10/30209530 DC : 0 BS EN 16186-1 - RAILWAY APPLICATIONS - DRIVER'S CAB - PART 1: VISIBILITY, LAYOUT, ACCESS
DIN EN 13245-3 E : 2010 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES
DD CEN/TS 15534-1:2007 Wood-plastics composites (WPC) Test methods for characterisation of WPC materials and products
BS EN 61966-9:2004 Multimedia systems and equipment. Colour measurement and management Digital cameras
EN 16094:2012 Laminate floor coverings - Test method for the determination of micro-scratch resistance
PREN 3840 : 200P2 AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION
I.S. EN 4595:2013 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUBSONIC EROSION RESISTANCE
I.S. EN 16581:2014 CONSERVATION OF CULTURAL HERITAGE - SURFACE PROTECTION FOR POROUS INORGANIC MATERIALS - LABORATORY TEST METHODS FOR THE EVALUATION OF THE PERFORMANCE OF WATER REPELLENT PRODUCTS
I.S. EN 15060:2006 PAINTS AND VARNISHES - GUIDE FOR THE CLASSIFICATION AND SELECTION OF COATING SYSTEMS FOR WOOD BASED MATERIALS IN FURNITURE FOR INTERIOR USE
BS EN 927-6:2006 Paints and varnishes. Coating materials and coating systems for exterior wood Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water
ONORM EN 927-6 : 2006 PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 6: EXPOSURE OF WOOD COATINGS TO ARTIFICIAL WEATHERING USING FLUORESCENT UV LAMPS AND WATER
UNI EN 4476 : 2012 AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT
EN 927-6:2006 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water
EN 4726:2015 Aerospace series - Acceptance of the cosmetic variations in appearance of aircraft cabin parts
EN 14978:2016 Laminate floor coverings - Elements with acrylic based surface layer, electron beam cured - Specifications, requirements and test methods
NF EN 12206-1 : 2011 PAINTS AND VARNISHES - COATING OF ALUMINIUM AND ALUMINIUM ALLOYS FOR ARCHITECTURAL PURPOSES - PART 1: COATINGS PREPARED FROM COATING POWDER
DIN EN 13200-4:2006-12 Spectator facilities - Part 4: Seats - Product characteristics
DIN EN 927-3:2012-10 PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST
DIN EN 14904 E : 2006 SURFACES FOR SPORTS AREAS - INDOOR SURFACES FOR MULTI-SPORTS USE - SPECIFICATION
DIN EN 927-1:2013-05 PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 1: CLASSIFICATION AND SELECTION
DIN EN 13438:2013-12 PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR HOT DIP GALVANISED OR SHERARDISED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES
DIN EN 54-23 :2010-06 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 23: FIRE ALARM DEVICES - VISUAL ALARM DEVICES
UNE-EN 13523-2:2014 Coil coated metals - Test methods - Part 2: Gloss
BS EN 438-2 : 2016 HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
UNI EN 4688 : 2013 AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION
I.S. EN 10245-2:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE
I.S. EN 14323:2017 WOOD-BASED PANELS - MELAMINE FACED BOARDS FOR INTERIOR USES - TEST METHODS
I.S. EN 10245-1:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
I.S. EN 1062-1:2004 PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR MASONRY AND CONCRETE - PART 1: CLASSIFICATION
DIN EN 12206-1:2004-09 Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder
I.S. EN 13245-1:2010 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES
I.S. EN 14468-1:2015 TABLE TENNIS - PART 1: TABLE TENNIS TABLES, FUNCTIONAL AND SAFETY REQUIREMENTS, TEST METHODS
DIN EN 1794-2:2011-04 ROAD TRAFFIC NOISE REDUCING DEVICES - NON-ACOUSTIC PERFORMANCE - PART 2: GENERAL SAFETY AND ENVIRONMENTAL REQUIREMENTS
I.S. EN 10245-4:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 4: POLYESTER COATED WIRE
UNI EN 4687 : 2013 AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION
EN 4689:2012 Aerospace series - Paints and varnishes - Two components cold curing polyurethane finish - High flexibility and chemical agent resistance for military application
I.S. EN 13523-2:2014 COIL COATED METALS - TEST METHODS - PART 2: GLOSS
I.S. EN 13438:2013 PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR HOT DIP GALVANISED OR SHERARDISED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES
I.S. EN 927-1:2013 PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 1: CLASSIFICATION AND SELECTION
EN 4687:2012 Aerospace series - Paints and varnishes - Chromate free non corrosion inhibiting two components cold curing primer for military application
I.S. EN 13964:2014 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
EN 4688:2012 Aerospace series - Paints and varnishes - Corrosion inhibiting two components cold curing primer for military application
I.S. EN 13802:2013 RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HYDRAULIC DAMPERS
I.S. EN 13523-14:2014 COIL COATED METALS - TEST METHODS - PART 14: CHALKING (HELMEN METHOD)
I.S. EN 10245-3:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 3: PE COATED WIRE
VDI 3822 Blatt 2.1.8:2012-01 Failure analysis - Defects of thermoplastic products made of plastics caused by weather-induced stress
DIN EN 16727-3:2017-05 RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - NON-ACOUSTIC PERFORMANCE - PART 3: GENERAL SAFETY AND ENVIRONMENTAL REQUIREMENTS
VDI 3822 Blatt 2.1.10:2012-01 Failure analysis - Significant instrumental analysis methods for failure analysis of products made of plastics
I.S. EN 16587:2017 RAILWAY APPLICATIONS - DESIGN FOR PRM USE - REQUIREMENTS ON OBSTACLE FREE ROUTES FOR INFRASTRUCTURE
PREN ISO 28722 : DRAFT 2010 VITREOUS AND PORCELAIN ENAMELS - CHARACTERISTICS OF ENAMEL COATINGS APPLIED TO STEEL PANELS INTENDED FOR ARCHITECTURE
DIN EN 54-23:2010-06 Fire detection and fire alarm systems - Part 23: Fire alarm devices - Visual alarm devices
17/30371341 DC : 0 PREN 4687 - AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE (NON CORROSION INHIBITING) TWO COMPONENT COLD CURING PRIMER - CHROMATE FREE PRIMER FOR MILITARY APPLICATION
BS EN 4595:2013 Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. Subsonic erosion resistance
08/30180847 DC : DRAFT JUNE 2008 BS EN 10245-5 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE
UNI EN 16566 : 2014 PAINTS AND VARNISHES - FILLERS FOR INTERNAL AND/OR EXTERNAL WORKS - ADAPTATION OF FILLERS TO EUROPEAN STANDARDS
17/30371344 DC : 0 BS EN 4689 - AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION
12/30250634 DC : 0 BS EN 13802 - RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HYDRAULIC DAMPERS
08/30194094 DC : 0 BS EN 13245-3 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES
PD CEN/TS 16611:2016 Furniture. Assessment of the surface resistance to microscratching
10/30216947 DC : 0 BS EN 16094 - LAMINATE FLOOR COVERINGS - TEST METHOD FOR THE DETERMINATION OF MICRO-SCRATCH RESISTANCE
I.S. EN 4688:2012 AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION
08/30180838 DC : DRAFT JUNE 2008 BS EN 10245-2 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE
UNE-EN 16094:2012 Laminate floor coverings - Test method for the determination of micro-scratch resistance
EN 438-2:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties
I.S. EN 4594:2013 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUPERSONIC EROSION RESISTANCE
UNI EN 4594 : 2013 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUPERSONIC EROSION RESISTANCE
I.S. EN 927-6:2006 PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 6: EXPOSURE OF WOOD COATINGS TO ARTIFICIAL WEATHERING USING FLUORESCENT UV LAMPS AND WATER
I.S. EN 13300:2001 PAINTS AND VARNISHES - WATER-BORNE COATING MATERIALS AND COATING SYSTEMS FOR INTERIOR WALLS AND CEILINGS - CLASSIFICATION
I.S. EN 16584-3:2017 RAILWAY APPLICATIONS - DESIGN FOR PRM USE - GENERAL REQUIREMENTS - PART 3: OPTICAL AND FRICTION CHARACTERISTICS
PD CEN/TR 16958:2017 Road marking materials. Conditions for removing/masking road markings
CEN/TR 16958:2017 Road marking materials - Conditions for removing/masking road markings
I.S. EN 13245-3:2010 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES
DIN EN 438-2:2016-06 HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
UNI EN 13245-3 : 2010 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES
PREN 16759 : DRAFT 2014 STRUCTURAL SEALANT GLAZING SYSTEMS (SSGS)
NF EN 1794-2 : 2011 ROAD TRAFFIC NOISE REDUCING DEVICES - NON-ACOUSTIC PERFORMANCE - PART 2: GENERAL SAFETY AND ENVIRONMENTAL REQUIREMENTS
DIN EN 13523-14:2014-08 Coil coated metals - Test methods - Part 14: Chalking (Helmen method)
DIN EN 14468-1:2015-05 Table tennis - Part 1: Table tennis tables, functional and safety requirements, test methods; German version EN 14468-1:2015
DIN EN 13523-2:2014-08 Coil coated metals - Test methods - Part 2: Gloss
DIN EN 13964:2014-08 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
DIN EN 14323:2004-06 WOOD-BASED PANELS - MELAMINE FACED BOARDS FOR INTERIOR USES - TEST METHODS
BS EN 10245-3:2011 Steel wire and wire products. Organic coatings on steel wire PE coated wire
DIN EN 14978:2016-08 Laminate floor coverings - Elements with acrylic based surface layer, electron beam cured - Specifications, requirements and test methods
UNI EN 1794-2 : 2011 ROAD TRAFFIC NOISE REDUCING DEVICES - NON-ACOUSTIC PERFORMANCE - PART 2: GENERAL SAFETY AND ENVIRONMENTAL REQUIREMENTS
I.S. EN 1794-2:2011 ROAD TRAFFIC NOISE REDUCING DEVICES - NON-ACOUSTIC PERFORMANCE - PART 2: GENERAL SAFETY AND ENVIRONMENTAL REQUIREMENTS
UNE-EN 927-3:2013 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test
EN 13964:2014 Suspended ceilings - Requirements and test methods
UNI EN 13245-1 : 2010 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES
UNI EN 10245-3 : 2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 3: PE COATED WIRE
UNI EN 54-23 : 2010 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 23: FIRE ALARM DEVICES - VISUAL ALARM DEVICES
UNI EN 13523-14 : 2014 COIL COATED METALS - TEST METHODS - PART 14: CHALKING (HELMEN METHOD)
UNI EN 13802 : 2014 RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HYDRAULIC DAMPERS
UNI EN 10245-1 : 2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
UNI EN 10245-2 : 2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE
UNI EN 13964 : 2014 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
UNI EN 13438 : 2013 PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR HOT DIP GALVANISED OR SHERARDIZED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES
UNI EN 10245-4 : 2011 Wire and drawn steel products - Organic coatings on steel wires - Part 4: Polyester coated wires
UNI EN 927-1 : 2013 PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 1: CLASSIFICATION AND SELECTION
DIN EN 16727-3 E : 2017 RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - NON-ACOUSTIC PERFORMANCE - PART 3: GENERAL SAFETY AND ENVIRONMENTAL REQUIREMENTS
DIN CEN/TS 16611;DIN SPEC 68264:2016-08 Furniture - Assessment of the surface resistance to microscratching; German version CEN/TS 16611:2016
07/30168609 DC : 0 BS ISO 28722 - VITREOUS AND PORCELAIN ENAMELS - CHARACTERISTICS OF THE ENAMEL COATINGS APPLIED TO STEEL PANELS INTENDED FOR ARCHITECTURE
PREN 13802 : DRAFT 2012 RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HYDRAULIC DAMPERS
PREN 927-6 : DRAFT 2016 PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 6: EXPOSURE OF WOOD COATINGS TO ARTIFICIAL WEATHERING USING FLUORESCENT UV LAMPS AND WATER
DIN EN 16566 E : 2014 PAINTS AND VARNISHES - FILLERS FOR INTERNAL AND/OR EXTERNAL WORKS - ADAPTION OF FILLERS TO EUROPEAN STANDARDS
DIN EN 16587 E : 2017 RAILWAY APPLICATIONS - DESIGN FOR PRM USE - REQUIREMENTS ON OBSTACLE FREE ROUTES FOR INFRASTRUCTURE
PREN 13438 : DRAFT 2012 PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR GALVANIZED OR SHERARDIZED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES
12/30268973 DC : 0 BS EN 13523-2 - COIL COATED METALS - TEST METHODS - PART 2: GLOSS
UNI EN 10245-5 : 2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE
BS EN 13245-3:2010 Plastics. Unplasticized poly(vinyl chloride) (PVCU) profiles for building applications Designation of PVC-UE profiles
BS EN 4594:2013 Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. Supersonic erosion resistance
13/30276214 DC : 0 BS EN 16566 - PAINTS AND VARNISHES - FILLERS FOR INTERNAL AND/OR EXTERNAL WORKS - ADAPTATION OF FILLERS TO EUROPEAN STANDARDS
BS EN 16094:2012 Laminate floor coverings. Test method for the determination of micro-scratch resistance
BS EN 15060:2006 Paints and varnishes. Guide for the classification and selection of coating systems for wood based materials in furniture for interior use
08/30180844 DC : DRAFT JUNE 2008 BS EN 10245-4 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 4: POLYESTER COATED WIRE
PREN 14904 : DRAFT 2015 SURFACES FOR SPORTS AREAS - INDOOR SURFACES FOR MULTI-SPORTS USE - SPECIFICATION
I.S. EN 16566:2014 PAINTS AND VARNISHES - FILLERS FOR INTERNAL AND/OR EXTERNAL WORKS - ADAPTATION OF FILLERS TO EUROPEAN STANDARDS
DIN EN 16581:2015-03 CONSERVATION OF CULTURAL HERITAGE - SURFACE PROTECTION FOR POROUS INORGANIC MATERIALS - LABORATORY TEST METHODS FOR THE EVALUATION OF THE PERFORMANCE OF WATER REPELLENT PRODUCTS
13/30288845 DC : 0 BS EN 14978 - LAMINATE FLOOR COVERINGS - ELEMENTS WITH ACRYLIC BASED SURFACE LAYER, ELECTRON BEAM CURED - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS
UNE-EN 438-2:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 2: Determination of properties
BS EN 16584-3:2017 Railway applications. Design for PRM use. General requirements Optical and friction characteristics
PREN 4688 : 200P1 AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION
PREN 4687 : 200P1 AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION
UNI EN 4160 : 2012 AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF THE EFFECT OF THERMAL EXPOSURE
I.S. EN 16727-3:2017 RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - NON-ACOUSTIC PERFORMANCE - PART 3: GENERAL SAFETY AND ENVIRONMENTAL REQUIREMENTS
I.S. EN 61966-9:2004 MULTIMEDIA SYSTEMS AND EQUIPMENT - COLOUR MEASUREMENT AND MANAGEMENT - DIGITAL CAMERAS
I.S. EN 4687:2012 AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION
I.S. EN 438-2:2016 HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
PREN 1794-2 : DRAFT 2009 ROAD TRAFFIC NOISE REDUCING DEVICES - NON-ACOUSTIC PERFORMANCE - PART 2: GENERAL SAFETY AND ENVIRONMENTAL REQUIREMENTS
BS EN 4726:2015 Aerospace series. Acceptance of the cosmetic variations in appearance of aircraft cabin parts
S.R. CEN/TS 16611:2016 FURNITURE - ASSESSMENT OF THE SURFACE RESISTANCE TO MICROSCRATCHING
EN 13300:2001 Paints and varnishes - Water-borne coating materials and coating systems for interior walls and ceilings - Classification
PREN 14904-2 : DRAFT 2017 SURFACES FOR SPORTS AREAS - MULTI-SPORTS FLOOR SYSTEMS FOR INDOOR USE - PART 2: SPECIFICATIONS
UNI EN 927-3 : 2012 PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST
S.R. CEN TS 15534-3:2007 WOOD-PLASTICS COMPOSITES (WPC) - PART 3: CHARACTERISATION OF WPC PRODUCTS
DIN EN 13802:2014-03 Railway applications - Suspension components - Hydraulic dampers
DIN EN 10245-4:2012-01 Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire; German version EN 10245-4:2011
BS EN 14468-1:2015 Table tennis Table tennis tables, functional and safety requirements, test methods
BS EN 14904:2006 Surfaces for sports areas. Indoor surfaces for multi-sports use. Specification
BS EN 54-23:2010 Fire detection and fire alarm systems Fire alarm devices. Visual alarm devices
DIN EN 14904:2015-09 (Draft) SURFACES FOR SPORTS AREAS - INDOOR SURFACES FOR MULTI-SPORTS USE - SPECIFICATION
BS EN 927-3:2012 Paints and varnishes. Coating materials and coating systems for exterior wood Natural weathering test
UNE-EN 927-1:2013 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 1: Classification and selection
UNE-EN 14468-1:2015 Table tennis - Part 1: Table tennis tables, functional and safety requirements, test methods
UNE-EN 10245-3:2012 Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire
DIN EN 13245-1 E : 2010 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES
UNE-EN 14978:2016 Laminate floor coverings - Elements with acrylic based surface layer, electron beam cured - Specifications, requirements and test methods
UNE-EN 13802:2014 Railway applications - Suspension components - Hydraulic dampers
DIN EN 13245-1:2010-11 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of PVC-U profiles
UNE-EN 10245-4:2012 Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire
UNE-EN 10245-2:2012 Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire
BS EN 13245-1:2010 Plastics. Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications Designation of PVC-U profiles
BS EN 10245-4:2011 Steel wire and wire products. Organic coatings on steel wire Polyester coated wire
BS EN 10245-1:2011 Steel wire and wire products. Organic coatings on steel wire General rules
EN 1794-2:2011 Road traffic noise reducing devices - Non-acoustic performance - Part 2: General safety and environmental requirements
BS EN 13438:2013 Paints and varnishes. Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes
BS EN 14978:2016 Laminate floor coverings. Elements with acrylic based surface layer, electron beam cured. Specifications, requirements and test methods
UNE-EN 10245-1:2012 Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules
BS EN 927-1:2013 Paints and varnishes. Coating materials and coating systems for exterior wood Classification and selection
BS EN 13722:2004 Furniture. Assessment of the surface gloss
UNE-EN 14323:2017 Wood-based panels - Melamine faced boards for interior uses - Test methods
DIN EN 10245-1:2012-01 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
EN 61966-9:2004 Multimedia systems and equipment - Colour measurement and management - Part 9: Digital cameras
EN 927-3:2012 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test
EN 54-23:2010 Fire detection and fire alarm systems - Part 23: Fire alarm devices - Visual alarm devices
EN 14431 : 2004 VITREOUS AND PORCELAIN ENAMELS - CHARACTERISTICS OF THE ENAMEL COATINGS APPLIED TO STEEL PANELS INTENDED FOR ARCHITECTURE
EN 13722 : 2004 FURNITURE - ASSESSMENT OF THE SURFACE GLOSS
EN 14904:2006 Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification
EN 16584-3:2017 Railway applications - Design for PRM use - General requirements - Part 3: Optical and friction characteristics
EN 4476:2011 Aerospace series - Paints and varnishes - Cold curing intermediate coat
EN 14468-1:2015 Table tennis - Part 1: Table tennis tables, functional and safety requirements, test methods
EN 16581 : 2014 CONSERVATION OF CULTURAL HERITAGE - SURFACE PROTECTION FOR POROUS INORGANIC MATERIALS - LABORATORY TEST METHODS FOR THE EVALUATION OF THE PERFORMANCE OF WATER REPELLENT PRODUCTS
EN 15060:2006 Paints and varnishes - Guide for the classification and selection of coating systems for wood based materials in furniture for interior use
EN 4594:2013 Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Supersonic erosion resistance
EN 14864:2005+A1:2007 Vitreous and porcelain enamels - Enamel coatings applied to steel for writing surfaces - Specification
EN 16566:2014 Paints and varnishes - Fillers for internal and/or external works - Adaptation of fillers to European standards
EN 3840:2007 Aerospace series - Paints and varnishes - Technical specification
EN 4160:2011 Aerospace series - Paints and varnishes - Determination of the effect of thermal exposure
EN 16727-3:2017 Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Non-acoustic performance - Part 3: General safety and environmental requirements
EN 4595:2013 Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Subsonic erosion resistance
EN 10245-4:2011 Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire
EN 16587:2017 Railway applications - Design for PRM Use - Requirements on obstacle free routes for infrastructure
EN 13802:2013 Railway applications - Suspension components - Hydraulic dampers
EN 927-1:2013 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 1: Classification and selection
PREN 14978 : DRAFT 2013 LAMINATE FLOOR COVERINGS - ELEMENTS WITH ACRYLIC BASED SURFACE LAYER, ELECTRON BEAM CURED - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS
DIN EN 16727-3:2015-02 (Draft) RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - NON-ACOUSTIC PERFORMANCE - PART 3: GENERAL SAFETY AND ENVIRONMENTAL REQUIREMENTS
PREN 13523-2 : DRAFT 2012 COIL COATED METALS - TEST METHODS - PART 2: GLOSS
12/30238456 DC : 0 BS EN 13438 - PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR GALVANIZED OR SHERARDIZED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES
I.S. EN 14431:2004 VITREOUS AND PORCELAIN ENAMELS - CHARACTERISTICS OF THE ENAMEL COATINGS APPLIED TO STEEL PANELS INTENDED FOR ARCHITECTURE
UNE-EN 10245-5:2012 Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire
08/30180835 DC : DRAFT JUNE 2008 BS EN 10245-1 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
BS EN 60350-2 : 2013 HOUSEHOLD ELECTRIC COOKING APPLIANCES - HOBS - METHODS FOR MEASURING PERFORMANCE
11/30237910 DC : 0 BS EN 927-3 - PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST
UNE-EN 16566:2014 Paints and varnishes - Fillers for internal and/or external works - Adaptation of fillers to European standards
BS EN 60398:2015 Installations for electroheating and electromagnetic processing. General performance test methods
BS EN 4160:2011 Aerospace series. Paints and varnishes. Determination of the effect of thermal exposure
UNE-EN 16581:2016 Conservation of Cultural Heritage - Surface protection for porous inorganic materials - Laboratory test methods for the evaluation of the performance of water repellent products
11/30248441 DC : 0 BS EN 927-1 - PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 1: CLASSIFICATION AND SELECTION
NF EN 13245-3 : 2010 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES
UNI EN 4595 : 2013 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUBSONIC EROSION RESISTANCE
I.S. EN 4689:2012 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION
08/30189974 DC : DRAFT DEC 2008 BS EN 13245-1 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES
17/30371000 DC : 0 BS EN 4476 - AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT
BS EN 4688:2012 Aerospace series. Paints and varnishes. Corrosion inhibiting two components cold curing primer for military application
DD CEN/TS 15534-3:2007 Wood-plastics composites (WPC) Characterisation of WPC products
08/30180841 DC : DRAFT JUNE 2008 BS EN 10245-3 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 3: PE COATED WIRE
BS EN 3840:2007 Aerospace series. Paints and varnishes. Technical specification
UNE-EN 13245-3:2011 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 3: Designation of PVC-UE profiles
BS EN 4476:2011 Aerospace series. Paints and varnishes. Cold curing intermediate coat
15/30329856 DC : 0 BS EN 14904 - SURFACES FOR SPORTS AREAS - INDOOR SURFACES FOR MULTI-SPORTS USE - SPECIFICATION
PREN 4726 : DRAFT 2017 AEROSPACE SERIES - ACCEPTANCE PARAMETERS OF AESTHETICAL VARIATIONS FOR ALL VISIBLE EQUIPMENT INSTALLED IN AIRCRAFT CABINS UNDER ALL CONTRACTUAL VARIATIONS
PREN 13964 : DRAFT 2013 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
I.S. EN 3840:2007 AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION
PREN 927-1 : DRAFT 2011 PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 1: CLASSIFICATION AND SELECTION
I.S. EN 4160:2011 AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF THE EFFECT OF THERMAL EXPOSURE
I.S. EN 10245-5:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE
S.R. CEN TS 15534-1:2007 WOOD-PLASTICS COMPOSITES (WPC) - PART 1: TEST METHODS FOR CHARACTERISATION OF WPC MATERIALS AND PRODUCTS
PREN 927-3 : DRAFT 2011 PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST
14/30300917 DC : 0 BS EN 16759 - STRUCTURAL SEALANT GLAZING SYSTEMS (SSGS)
14/30295898 DC : 0 BS EN 14904 - SURFACES FOR SPORTS AREAS - INDOOR SURFACES FOR MULTI-SPORTS USE - SPECIFICATION
UNE-EN 13245-1:2011 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of PVC-U profiles
UNE-EN 13964:2016 Suspended ceilings - Requirements and test methods
UNE-EN 1794-2:2011 Road traffic noise reducing devices - Non-acoustic performance - Part 2: General safety and environmental requirements
BS EN 13200-4:2006 Spectator facilities Seats. Product characteristics
BS EN 13300:2001 Paints and varnishes. Water-borne coating materials and coating systems for interior walls and ceilings. Classification
BS EN 13523-14:2014 Coil coated metals. Test methods Chalking (Helmen method)
BS EN 10245-2:2011 Steel wire and wire products. Organic coatings on steel wire PVC finished wire
BS EN 14431:2004 Vitreous and porcelain enamels. Characteristics of the enamel coatings applied to steel panels intended for architecture
BS EN 13964:2014 Suspended ceilings. Requirements and test methods
EN 13523-2:2014 Coil coated metals - Test methods - Part 2: Gloss
DIN EN 16587:2017-09 RAILWAY APPLICATIONS - DESIGN FOR PRM USE - REQUIREMENTS ON OBSTACLE FREE ROUTES FOR INFRASTRUCTURE
CEN/TS 15534-3:2007 Wood-plastics composites (WPC) - Part 3: Characterisation of WPC products
UNI EN 13523-2 : 2014 COIL COATED METALS - TEST METHODS - PART 2: GLOSS
DIN EN 14431:2004-12 VITREOUS AND PORCELAIN ENAMELS - CHARACTERISTICS OF THE ENAMEL COATINGS APPLIED TO STEEL PANELS INTENDED FOR ARCHITECTURE
DIN EN 10245-2:2012-01 Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire; German version EN 10245-2:2011
CEN/TS 16611:2016 Furniture - Assessment of the surface resistance to microscratching
DIN EN 14864:2007-12 VITREOUS AND PORCELAIN ENAMELS - ENAMEL COATINGS APPLIED TO STEEL FOR WRITING SURFACES - SPECIFICATION
EN 13200-4:2006 Spectator facilities - Part 4: Seats - Product characteristics
EN 60398:2015 Installations for electroheating and electromagnetic processing - General performance test methods
EN 14323:2017 Wood-based panels - Melamine faced boards for interior uses - Test methods
DIN EN 10245-3:2012-01 Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire; German version EN 10245-3:2011
EN 13245-1:2010 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of PVC-U profiles

ISO 1514:2016 Paints and varnishes — Standard panels for testing
EN 14086:2003 Paper and board - Measurement of specular gloss - 45° gloss with a parallel beam, DIN method
DIN 1349-1:1972-06 TRANSMISSION OF OPTICAL RADIATION; OPTICAL CLEAR (NONSCATTERING) MEDIA, QUANTITIES, SYMBOLS AND UNITS
ISO 8254-1:2009 Paper and board Measurement of specular gloss Part 1: 75 degree gloss with a converging beam, TAPPI method
ISO 7668:2010 Anodizing of aluminium and its alloys Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees
ISO 2808:2007 Paints and varnishes Determination of film thickness
ISO/TR 22971:2005 Accuracy (trueness and precision) of measurement methods and results Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results
ISO 8254-2:2016 Paper and board Measurement of specular gloss Part 2: 75 degree gloss with a parallel beam, DIN method
ISO/IEC Guide 99:2007 International vocabulary of metrology Basic and general concepts and associated terms (VIM)
ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
ISO 4618:2014 Paints and varnishes — Terms and definitions

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.