EN ISO 286-1:2010/AC:2013
Current
The latest, up-to-date edition.
08-07-2013
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 ISO code system for tolerances on linear sizes
5 ISO fit system
Annex A (informative) - Further information about the
ISO system of limits and fits and former practice
Annex B (informative) - Examples of the use of ISO 286-1
to determine fits and tolerance classes
Annex C (informative) - Relationship to the GPS matrix model
Bibliography
Specifies the ISO code system for tolerances to be used for linear sizes of features of the following types: a) cylinder; b) two parallel opposite surfaces.
Committee |
TC 290
|
DevelopmentNote |
Supersedes EN 20286-1. (05/2010)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Supersedes |
Standards | Relationship |
DIN EN ISO 286-1:2019-09 | Identical |
ONORM EN ISO 286-1 : 2014 | Identical |
NEN EN ISO 286-1 : 2010 C1 2013 | Identical |
PN EN ISO 286-1 : 2011 AC 2016 | Identical |
I.S. EN ISO 286-1:2010/AC:2013 | Identical |
SN EN ISO 286-1 : 2010 CORR 2013 | Identical |
UNI EN ISO 286-1 : 2010 | Identical |
NBN EN ISO 286-1 : 2010 COR 2013 | Identical |
DIN EN ISO 286-1:2010-11 | Identical |
BS EN ISO 286-1:2010 | Identical |
ISO 286-1:2010/Cor 1:2013 | Identical |
UNE-EN ISO 286-1:2011 | Identical |
NF EN ISO 286-1 : 2010 | Identical |
ISO 286-1:2010 | Identical |
NS EN ISO 286-1 : 2010 AC 2013 | Identical |
ÖNORM EN ISO 286-1: 2019 10 15 | Identical |
UNE-EN 60320-3:2015 | Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges |
10/30234318 DC : DRAFT DEC 2010 | BS EN 12561-2 - RAILWAY APPLICATIONS - TANK WAGONS - PART 2: BOTTOM EMPTYING DEVICES FOR LIQUID PRODUCTS INCLUDING VAPOUR RETURN |
BS EN 15566:2016 | Railway applications. Railway rolling stock. Draw gear and screw coupling |
CEI EN 62074-1 : 2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION |
13/30255310 DC : 0 | BS EN 1426 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
10/30234327 DC : DRAFT DEC 2010 | BS EN 12561-5 - RAILWAY APPLICATIONS - TANK WAGONS - PART 5: DEVICES FOR VAPOUR RETURN WHILE FILLING OR EMPTYING OF LIQUID PRODUCTS |
I.S. EN 62074-1:2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION |
EN 62077:2016 | Fibre optic interconnecting devices and passive components - Fibre optic circulators - Generic specification |
I.S. EN 61977:2015 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FILTERS - GENERIC SPECIFICATION |
I.S. EN 62077:2016 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CIRCULATORS - GENERIC SPECIFICATION |
DIN EN 12561-4:2011-10 | Railway applications - Tank wagons - Part 4: Devices for top filling and emptying of liquid products |
UNE-EN 12561-4:2012 | Railway applications - Tank wagons - Part 4: Devices for top filling and emptying of liquid products |
BS EN 12561-5:2011 | Railway applications. Tank wagons Devices for vapour return while filling or emptying of liquid products |
EN 61243-3:2014/AC:2015 | LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE |
EN 61314-1:2012 | Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1: Generic specification |
EN 10088-3:2014 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
EN 12561-6:2011 (edition 2) | Railway applications - Tank wagons - Part 6: Manholes |
EN 60874-1:2012 | Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification |
EN 12561-5:2011 | Railway applications - Tank wagons - Part 5: Devices for vapour return while filling or emptying of liquid products |
BS EN 60876-1:2014 | Fibre optic interconnecting devices and passive components. Fibre optic spatial switches Generic specification |
BS EN 61202-1:2017 | Fibre optic interconnecting devices and passive components. Fibre optic isolators Generic specification |
10/30234330 DC : DRAFT DEC 2010 | BS EN 12561-6 - RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES |
PREN 1426 : DRAFT 2013 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
I.S. EN 61314-1:2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION (IEC 61314-1:2011 (EQV)) |
CEI EN 61314-1 : 2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION |
BS EN 61978-1:2014 | Fibre optic interconnecting devices and passive components. Fibre optic passive chromatic dispersion compensators Generic specification |
BS 2000-49(2015) : 2015 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
BS EN 61243-3:2014 | Live working. Voltage detectors Two-pole low-voltage type |
I.S. EN 60875-1:2015 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - NON-WAVELENGTH-SELECTIVE FIBRE OPTIC BRANCHING DEVICES - PART 1: GENERIC SPECIFICATION |
BS EN 60875-1:2015 | Fibre optic interconnecting devices and passive components. Non-wavelength-selective fibre optic branching devices Generic specification |
EN 1426:2015 | Bitumen and bituminous binders - Determination of needle penetration |
UNE-EN 12561-5:2012 | Railway applications - Tank wagons - Part 5: Devices for vapour return while filling or emptying of liquid products |
I.S. EN 12561-4:2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 4: DEVICES FOR TOP FILLING AND EMPTYING OF LIQUID PRODUCTS |
I.S. EN 1426:2015 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
I.S. EN 12561-3:2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE |
I.S. EN 12561-5:2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 5: DEVICES FOR VAPOUR RETURN WHILE FILLING OR EMPTYING OF LIQUID PRODUCTS |
I.S. EN 10088-3:2014 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
I.S. EN 12561-2:2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 2: BOTTOM EMPTYING DEVICES FOR LIQUID PRODUCTS INCLUDING VAPOUR RETURN |
DIN EN 10088-3:2014-12 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
I.S. EN 12561-6:2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES |
VDI 3405 Blatt 2:2013-08 | Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing |
BS EN 62074-1:2014 | Fibre optic interconnecting devices and passive components. Fibre optic WDM devices Generic specification |
BS EN 61314-1:2012 | Fibre optic interconnecting devices and passive components. Fibre optic fan-outs Generic specification |
I.S. EN 15566:2016 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING |
BS EN 13236 : 2010 | SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS |
EN 61202-1:2017 | Fibre optic interconnecting devices and passive components - Fibre optic isolators - Part 1: Generic specification |
I.S. EN 60869-1:2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC PASSIVE POWER CONTROL DEVICES - PART 1: GENERIC SPECIFICATION (IEC 60869-1:2012 (EQV)) |
I.S. EN 60874-1:2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION (IEC 60874-1:2011 (EQV)) |
BS EN 60869-1:2013 | Fibre optic interconnecting devices and passive components. Fibre optic passive power control devices Generic specification |
I.S. EN 61978-1:2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC PASSIVE CHROMATIC DISPERSION COMPENSATORS - PART 1: GENERIC SPECIFICATION |
DIN EN 13236:2016-05 | SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS |
DIN EN 1426:2015-09 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
UNE-EN 1426:2015 | Bitumen and bituminous binders - Determination of needle penetration |
UNE-EN 10088-3:2015 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
UNE-EN 12561-6:2012 | Railway applications - Tank wagons - Part 6: Manholes |
EN 61977:2015 | Fibre optic interconnecting devices and passive components - Fibre optic filters - Generic specification |
UNI EN 12561-4 : 2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 4: DEVICES FOR TOP FILLING EMPTYING AND OF LIQUID PRODUCTS |
UNI EN 10088-3 : 2014 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMIFINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
UNI EN 13236 : 2011 | SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS |
EN 12561-4:2011 | Railway applications - Tank wagons - Part 4: Devices for top filling and emptying of liquid products |
UNI EN 12561-2 : 2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 2: BOTTOM EMPTYING DEVICES FOR LIQUID PRODUCTS INCLUDING VAPOUR RETURN |
UNI EN 12561-5 : 2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 5: DEVICES FOR VAPOUR RETURN WHILE FILLING OR EMPTYING OF LIQUID PRODUCTS |
UNI EN 12561-6 : 2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES |
UNI EN 12561-3 : 2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE |
PREN 13236 : DRAFT 2017 | SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS |
BS EN 61274-1:2012 | Fibre optic interconnecting devices and passive components. Adaptors for fibre optic connectors Generic specification |
CEI EN 61274-1 : 2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - ADAPTORS FOR FIBRE OPTIC CONNECTORS - PART 1: GENERIC SPECIFICATION |
CEI EN 61202-1 : 2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC ISOLATORS - PART 1: GENERIC SPECIFICATION |
17/30359229 DC : DRAFT SEP 2017 | BS EN 13236 - SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS |
BS EN 60320-3:2014 | Appliance couplers for household and similar general purposes Standard sheets and gauges |
I.S. EN 61243-3:2014 | LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE |
CEI EN 60874-1 : 2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION |
EN 13236:2010+A1:2015 | Safety requirements for superabrasive products |
BS EN 12561-3:2011 | Railway applications. Tank wagons Bottom filling and emptying devices for gases liquefied under pressure |
BS EN 12561-2:2011 | Railway applications. Tank wagons Bottom emptying devices for liquid products including vapour return |
UNE-EN 12561-2:2012 | Railway applications - Tank wagons - Part 2: Bottom emptying devices for liquid products including vapour return |
UNE-EN 12561-3:2012 | Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure |
BS EN 10088-3:2014 | Stainless steels Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
BS EN 12561-4:2011 | Railway applications. Tank wagons Devices for top filling and emptying of liquid products |
BS EN 1426:2015 | Bitumen and bituminous binders. Determination of needle penetration |
UNE-EN 61243-3:2015 | Live working - Voltage detectors - Part 3: Two-pole low-voltage type |
EN 12561-2:2011 | Railway applications - Tank wagons - Part 2: Bottom emptying devices for liquid products including vapour return |
EN 15566:2016 | Railway applications - Railway rolling stock - Draw gear and screw coupling |
UNE-EN 15566:2017 | Railway applications - Railway rolling stock - Draw gear and screw coupling |
10/30234324 DC : DRAFT DEC 2010 | BS EN 12561-4 - RAILWAY APPLICATIONS - TANK WAGONS - PART 4: DEVICES FOR TOP FILLING AND EMPTYING OF LIQUID PRODUCTS |
BS EN 61977:2015 | Fibre optic interconnecting devices and passive components. Fibre optic filters. Generic specification |
10/30234321 DC : DRAFT DEC 2010 | BS EN 12561-3 - RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE |
BS EN 62077:2016 | Fibre optic interconnecting devices and passive components. Fibre optic circulators. Generic specification |
BS EN 60874-1:2012 | Fibre optic interconnecting devices and passive components. Connectors for optical fibres and cables Generic specification |
I.S. EN 60876-1:2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC SPATIAL SWITCHES - PART 1: GENERIC SPECIFICATION |
I.S. EN 61274-1:2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - ADAPTORS FOR FIBRE OPTIC CONNECTORS - PART 1: GENERIC SPECIFICATION (IEC 61274-1:2011 (EQV)) |
I.S. EN 13236:2010 | SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS |
DIN EN 12561-5:2011-10 | Railway applications - Tank wagons - Part 5: Devices for vapour return while filling or emptying of liquid products |
DIN EN 12561-6:2011-10 | Railway applications - Tank wagons - Part 6: Manholes |
DIN EN 12561-2:2011-10 | Railway applications - Tank wagons - Part 2: Bottom emptying devices for liquid products including vapour return |
DIN EN 12561-3:2011-10 | Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure |
BS EN 12561-6:2011 | Railway applications. Tank wagons Manholes |
EN 61978-1:2014 | Fibre optic interconnecting devices and passive components - Fibre optic passive chromatic dispersion compensators - Part 1: Generic specification |
EN 12561-3:2011/AC:2014 | RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE |
EN 60875-1:2015 | Fibre optic interconnecting devices and passive components - Non-wavelength-selective fibre optic branching devices - Part 1: Generic specification |
EN 62074-1:2014 | Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generic specification |
EN 60869-1:2013 | Fibre optic interconnecting devices and passive components - Fibre optic passive power control devices - Part 1: Generic specification |
EN 61274-1:2012 | Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors - Part 1: Generic specification |
EN 60320-3:2014 | Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges |
EN 60876-1:2014 | Fibre optic interconnecting devices and passive components - Fibre optic spatial switches - Part 1: Generic specification |
ISO/TR 14638:1995 | Geometrical product specification (GPS) Masterplan |
ISO/TS 17450-2:2002 | Geometrical product specifications (GPS) General concepts Part 2: Basic tenets, specifications, operators and uncertainties |
ISO 2692:2014 | Geometrical product specifications (GPS) Geometrical tolerancing Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) |
ISO 4759-1:2000 | Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C |
ISO 1101:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
ISO 1:2016 | Geometrical product specifications (GPS) Standard reference temperature for the specification of geometrical and dimensional properties |
ISO 14253-1:2017 | Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for verifying conformity or nonconformity with specifications |
ISO 1302:2002 | Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
ISO 3534-2:2006 | Statistics Vocabulary and symbols Part 2: Applied statistics |
ISO 14660-2:1999 | Geometrical Product Specifications (GPS) Geometrical features Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature |
ISO 286-2:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts |
ISO 14660-1:1999 | Geometrical Product Specifications (GPS) Geometrical features Part 1: General terms and definitions |
ISO/R 1938:1971 | ISO system of limits and fits Part II : Inspection of plain workpieces |
ISO 3534-1:2006 | Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.