EN ISO 4259:2006
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Petroleum products - Determination and application of precision data in relation to methods of test (ISO 4259:2006)
Superseded date
12-01-2017
Published date
08-01-2006
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Stages in the planning of an inter-laboratory test
programme for the determination of the precision of
a test method
4.1 General
4.2 Preparing a draft method of test
4.3 Planning a pilot programme with at least two
laboratories
4.4 Planning the inter-laboratory programme
4.5 Executing the inter-laboratory programme
5 Inspection of inter-laboratory results for uniformity
and for outliers
5.1 General
5.2 Transformation of data
5.3 Tests for outliers
5.4 Rejection of complete data from a sample
5.5 Estimating missing or rejected values
5.6 Rejection test for outlying laboratories
5.7 Confirmation of selected transformation
6 Analysis of variance, calculation and expression of
precision estimates
6.1 General
6.2 Analysis of variance
6.3 Expectation of mean squares and calculation of
precision estimates
6.4 Expression of precision estimates of a method of test
7 Significance of repeatability (r) and reproducibility (R)
7.1 General
7.2 Repeatability, r
7.3 Reproducibility, R
8 Specifications
8.1 Aim of specifications
8.2 Construction of specifications limits in relation
to precision
9 Quality control against specifications
9.1 General
9.2 Testing margin at the supplier
9.3 Testing margin at the recipient
10 Dispute procedure
Annex A (normative) Determination of number of samples
required
Annex B (informative) Derivation of equation for calculating
the number of samples required
Annex C (normative) Notation and tests
Annex D (normative) Example results of test for determination
of bromine number and statistical tables
Annex E (normative) Types of dependence and corresponding
transformations
Annex F (normative) Weighted linear regression analysis
Annex G (normative) Rules for rounding off results
Annex H (informative) Explanation of equations given in Clause 7
Annex I (informative) Specifications that relate to a specified
degree of criticality
Bibliography
ISO 4259:2006 covers the calculation of precision estimates and their application to specifications. In particular, it contains definitions of relevant statistical terms, the procedures to be adopted in the planning of an inter-laboratory test programme to determine the precision of a test method, the method of calculating the precision from the results of such a programme, and the procedure to be followed in the interpretation of laboratory results in relation both to precision of the test methods and to the limits laid down in specifications.The procedures in ISO 4259:2006 have been designed specifically for petroleum and petroleum-related products, which are normally homogeneous. However, the procedures described in this International Standard can also be applied to other types of homogeneous products. Careful investigations are necessary before applying ISO 4259:2006 to products for which the assumption of homogeneity can be questioned.
| Committee |
CEN/TC 19
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN ISO 4259 : 2007 | Identical |
| UNI EN ISO 4259 : 2006 | Identical |
| I.S. EN ISO 4259:2006 | Identical |
| NS EN ISO 4259 : 2ED 2006 | Identical |
| NF EN ISO 4259 : 2006 | Identical |
| BS EN ISO 4259:2006 | Identical |
| UNE-EN ISO 4259:2007 | Identical |
| NEN EN ISO 4259 : 2006 | Identical |
| IP 367 : 2015 | Identical |
| NBN EN ISO 4259 : 2006 | Identical |
| ISO 4259:2006 | Identical |
| PN EN ISO 4259 : 2009 | Identical |
| SN EN ISO 4259 : 2006 | Identical |
| BS 2000-367(2006) : 2006 | Identical |
| I.S. EN 14104:2003 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF ACID VALUE |
| I.S. EN 16270:2015 | AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHIC METHOD |
| I.S. EN 14110:2003 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF METHANOL CONTENT |
| I.S. EN 14517:2004 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF HYDROCARBON TYPES AND OXYGENATES IN PETROL - MULTIDIMENSIONAL GAS CHROMATOGRAPHY METHOD |
| I.S. EN 15199-2:2006 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 2: HEAVY DISTILLATES AND RESIDUAL FUELS |
| I.S. EN 14078:2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| I.S. EN 12662:2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS |
| I.S. EN 15492:2012 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULFATE CONTENT - ION CHROMATOGRAPHIC METHOD |
| I.S. EN 12846:2002 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF EFFLUX TIME OF BITUMEN EMULSIONS BY THE EFFLUX VISCOMETER |
| I.S. EN 14105:2011 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF FREE AND TOTAL GLYCEROL AND MONO-, DI-, TRIGLYCERIDE CONTENTS |
| I.S. EN 16709:2015 | AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS |
| I.S. EN 12916:2016 | PETROLEUM PRODUCTS - DETERMINATION OF AROMATIC HYDROCARBON TYPES IN MIDDLE DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION |
| I.S. EN 116:2015 | DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - STEPWISE COOLING BATH METHOD |
| EN 14214:2012+A1:2014/AC:2014 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 15484:2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE - POTENTIOMETRIC METHOD |
| I.S. EN 14111:2003 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF IODINE VALUE |
| I.S. EN 14108:2003 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF SODIUM CONTENT BY ATOMIC ABSORPTION SPECTROMETRY |
| I.S. EN 12766-3:2005 | PETROLEUM PRODUCTS AND USED OILS - DETERMINATION OF PCBS AND RELATED PRODUCTS - PART 3: DETERMINATION AND QUANTIFICATION OF POLYCHLORINATED TERPHENYLS (PCT) AND POLYCHLORINATED BENZYL TOLUENES (PCBT) CONTENT BY GAS CHROMATOGRAPHY (GC) USING AN ELECTRON CAPTURE DETECTOR (ECD) |
| I.S. EN 14109:2003 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF POTASSIUM CONTENT BY ATOMIC ABSORPTION SPECTROMETRY |
| UNE-EN 15492:2012 | Ethanol as a blending component for petrol - Determination of inorganic chloride and sulfate content - Ion chromatographic method |
| DIN EN 15492:2012-04 | Ethanol as a blending component for petrol - Determination of inorganic chloride and sulfate content - Ion chromatographic method |
| DIN EN 15489:2007-11 | Ethanol as a blending component for petrol - Determination of water content - Karl Fischer coulometric titration method |
| DIN EN 12662:1998-10 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS |
| DIN EN 15491:2007-11 | Ethanol as a blending component for petrol - Determination of total acidity - Colour indicator titration method |
| CEN/TR 16885:2015 | Liquid petroleum products - Investigation on test method for measurement of the oxidation stability of diesel and diesel/FAME blends by Acid Number after ageing |
| CEN/TR 15138:2005 | Petroleum products and other liquids - Guide to flash point testing |
| BS EN 15195:2014 | Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber |
| BS EN 14214:2012 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| BS EN 15984:2017 | Petroleum industry and products. Determination of composition of refinery heating gas and calculation of carbon content and calorific value. Gas chromatography method |
| EN 14105:2011 | Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of free and total glycerol and mono-, di-, triglyceride contents |
| EN 12916:2016 | Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection |
| BS EN 12847:2002 | Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of settling tendency of bitumen emulsions |
| BS EN 16906:2017 | Liquid petroleum products. Determination of the ignition quality of diesel fuels. BASF engine method |
| EN 12846:2002 | Bitumen and bituminous binders - Determination of efflux time of bitumen emulsions by the efflux viscometer |
| BS EN 16896:2016 | Petroleum products and related products. Determination of kinematic viscosity. Method by Stabinger type viscosimeter |
| CEN/TR 15139:2005 | Petroleum products and other liquids - Applicability of test methods on sulfur determination in petrol and diesel fuel |
| DIN EN 16135:2012-02 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| EN 15984:2017 | Petroleum industry and products - Determination of composition of refinery heating gas and calculation of carbon content and calorific value - Gas chromatography method |
| DIN EN 16294:2013-02 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATIVES - DETERMINATION OF PHOSPHORUS CONTENT IN FATTY ACID METHYL ESTERS (FAME) - OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES) |
| DIN EN 16709:2015-12 | AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS |
| DIN EN 14833:2005-09 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE HYDROLYTIC STABILITY OF FIRE-RESISTANT PHOSPHATE ESTER FLUIDS |
| BS EN 16136:2015 | Automotive fuels. Determination of manganese and iron content in unleaded petrol. Inductively coupled plasma optical emission spectrometry (ICP OES) method |
| DIN EN 15470:2017-09 | LIQUEFIED PETROLEUM GASES - DETERMINATION OF DISSOLVED RESIDUES - HIGH TEMPERATURE GAS CHROMATOGRAPHIC METHOD |
| DIN EN 16761-2:2016-02 | AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 2: METHOD USING HEART CUT TECHNIQUE |
| DIN EN 14109:2003-10 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF POTASSIUM CONTENT BY ATOMIC ABSORPTION SPECTROMETRY |
| ISO 6245:2001 | Petroleum products — Determination of ash |
| EN 116:2015 | Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method |
| DIN EN 14103:2015-05 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF ESTER AND LINOLENIC ACID METHYL ESTER CONTENTS |
| EN 12697-3:2013 | Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen recovery: Rotary evaporator |
| BS EN 12916:2016 | Petroleum products. Determination of aromatic hydrocarbon types in middle distillates. High performance liquid chromatography method with refractive index detection |
| BS EN 14104:2003 | Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of acid value |
| DIN EN 12848:2009-07 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF MIXING STABILITY WITH CEMENT OF BITUMINOUS EMULSIONS |
| EN 12848:2009 | Bitumen and bituminous binders - Determination of mixing stability with cement of bituminous emulsions |
| DIN EN 12591:2009-08 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS |
| BS EN 1601:2017 | Liquid petroleum products. Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol. Method by gas chromatography (O-FID) |
| BS EN 12697-3 : 2013 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 3: BITUMEN RECOVERY: ROTARY EVAPORATOR |
| DIN EN 15940:2016-09 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
| BS EN 12591:2009 | Bitumen and bituminous binders. Specifications for paving grade bitumens |
| BS EN 15199-2:2006 | Petroleum products. Determination of boiling range distribution by gas chromatography method Heavy distillates and residual fuel |
| BS EN 589 : 2008 | AUTOMOTIVE FUELS - LPG - REQUIREMENTS AND TEST METHODS |
| CR 13839:2000 | Petroleum products - Determination of aromaticity - 13C nuclear magnetic resonance (NMR) spectrometric method |
| DIN EN 1601:2017-10 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT IN UNLEADED PETROL - METHOD BY GAS CHROMATOGRAPHY (O-FID) |
| BS EN 14865-2 : 2006 | RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 2: METHOD TO TEST THE MECHANICAL STABILITY TO COVER VEHICLE SPEEDS UP TO 200 KM/H |
| CR 13840:2000 | Petroleum products - Determination of polycyclic aromatic hydrocarbons - Ultraviolet (UV) spectrometric method |
| BS EN 590 : 2013 | AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS |
| DIN EN 12916:2016-06 | PETROLEUM PRODUCTS - DETERMINATION OF AROMATIC HYDROCARBON TYPES IN MIDDLE DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION |
| DIN EN 12662:2014-07 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS |
| DIN EN 14106:2003-10 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF FREE GLYCEROL CONTENT |
| DIN EN 14111:2003-10 | Fat and oil derivatives - Fatty acid methyl esters (FAME) - Determination of iodine value |
| EN 12766-2:2001 | Petroleum products and used oils - Determination of PCBs and related products - Part 2: Calculation of polychlorinated biphenyl (PCB) content |
| DIN EN 12697-3:2013-08 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 3: BITUMEN RECOVERY: ROTARY EVAPORATOR |
| DIN EN 16329:2013-07 | Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method |
| BS EN 14865-1 : 2009 | RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 1: METHOD TO TEST THE ABILITY TO LUBRICATE |
| BS EN 13924-1:2015 | Bitumen and bituminous binders. Specification framework for special paving grade bitumen Hard paving grade bitumens |
| EN 12662:2014 | Liquid petroleum products - Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters |
| DIN EN 15470:2016-01 (Draft) | LIQUEFIED PETROLEUM GASES - DETERMINATION OF DISSOLVED RESIDUES - HIGH TEMPERATURE GAS CHROMATOGRAPHIC METHOD |
| DIN EN 16934:2015-12 (Draft) | AUTOMOTIVE FUELS AND FAT AND OIL DERIVATES - DETERMINATION OF STERYL GLYCOSIDES IN FATTY ACID METHYL ESTERS (FAME) - METHOD BY GC-MS WITH PRIOR PURIFICATION BY SPE |
| DIN EN 15376:2014-12 | AUTOMOTIVE FUELS - ETHANOL AS A BLENDING COMPONENT FOR PETROL - REQUIREMENTS AND TEST METHODS |
| DIN EN 14078:2004-03 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| CEN/TR 15160:2005 | Petroleum and related products - Applicability of diesel fuel test methods for Fatty Acid Methyl Esters (FAME) - Information and results on round robin tests |
| DIN EN 15751:2014-06 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
| BS EN 16294:2012 | Petroleum products and fat and oil derivatives. Determination of phosphorus content in fatty acid methyl esters (FAME). Optical emission spectral analysis with inductively coupled plasma (ICP OES) |
| I.S. EN 14865-1:2009 | RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 1: METHOD TO TEST THE ABILITY TO LUBRICATE |
| BS EN 16144:2012 | Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels. Fixed range injection period, constant volume combustion chamber method |
| BS EN 16476:2014 | Liquid petroleum products. Determination of Sodium, Potassium, Calcium, Phosphorus, Copper and Zinc contents in diesel fuel. Method via Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES) |
| I.S. EN 16568:2014 | AUTOMOTIVE FUELS - BLENDS OF FATTY ACID METHYL ESTER (FAME) WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY RAPIDLY ACCELERATED OXIDATION METHOD AT 120 DEGREES C |
| PD CEN/TR 16514:2013 | Automotive fuels. Unleaded petrol containing more than 3,7 % (m/m) oxygen. Roadmap, test methods, and requirements for E10+ petrol |
| BS EN 15721:2013 | Ethanol as a blending component for petrol. Determination of higher alcohols, methanol and other impurities. Gas chromatographic method |
| BS 2000-507(2006) : 2006 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 2: HEAVY DISTILLATES AND RESIDUAL FUELS |
| I.S. EN 16906:2017 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - BASF ENGINE METHOD |
| UNI EN 16091 : 2012 | LIQUID PETROLEUM PRODUCTS - MIDDLE DISTILLATES AND FATTY ACID METHYL ESTER (FAME) FUELS AND BLENDS - DETERMINATION OF OXIDATION STABILITY BY RAPID SMALL SCALE OXIDATION METHOD |
| BS EN 15779 : 2009 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>= 4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY |
| BS 2000-485(2003) : 2003 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SETTLING TENDENCY OF BITUMEN EMULSIONS |
| I.S. EN 14865-2:2006 | RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 2: METHOD TO TEST THE MECHANICAL STABILITY TO COVER VEHICLE SPEEDS UP TO 200 KM/H |
| BS EN 13924-2:2014 | Bitumen and bituminous binders. Specification framework for special paving grade bitumen Multigrade paving grade bitumens |
| BS EN 15492:2012 | Ethanol as a blending component for petrol. Determination of inorganic chloride and sulfate content. Ion chromatographic method |
| UNI EN 15199-3 : 2008 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 3: CRUDE OIL |
| I.S. EN 14274:2013 | AUTOMOTIVE FUELS - ASSESSMENT OF PETROL AND DIESEL QUALITY - FUEL QUALITY MONITORING SYSTEM (FQMS) |
| I.S. EN 16136:2015 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| I.S. EN 14213:2003 | HEATING FUELS - FATTY ACID METHYL ESTERS (FAME) - REQUIREMENTS AND TEST METHODS |
| I.S. EN 14112:2016 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF OXIDATION STABILITY (ACCELERATED OXIDATION TEST) |
| BS EN 15199-1:2006 | Petroleum products. Determination of boiling range distribution by gas chromatography method Middle distillates and lubricating base oils |
| DIN EN 12766-3:2005-02 | Petroleum products and used oils - Determination of PCBs and related products - Part 3: Determination and quantification of polychlorinated terphenyls (PCT) and polychlorinated benzyl toluenes (PCBT) content by gas chromatography (GC) using an electron capture detector (ECD) |
| DIN EN 14213:2003-11 | HEATING FUELS - FATTY ACID METHYL ESTERS (FAME) - REQUIREMENTS AND TEST METHODS |
| I.S. EN 16576:2014 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN DIESEL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| I.S. EN 15691:2009 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF DRY RESIDUE (INVOLATILE MATERIAL) - GRAVIMETRIC METHOD |
| I.S. EN 15491:2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF TOTAL ACIDITY - COLOUR INDICATOR TITRATION METHOD |
| I.S. EN 15486:2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF SULFUR CONTENT - ULTRAVIOLET FLUORESCENCE METHOD |
| DIN EN 14108:2015-06 | Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of sodium content by atomic absorption spectrometry; German version EN 14108:2003 |
| DIN EN 15487:2007-11 | Ethanol as a blending component for petrol - Determination of phosphorus content - Ammonium molybdate spectrometric method |
| DIN EN 14214:2003-11 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| DIN EN 14274:2013-05 | Automotive fuels - Assessment of petrol and diesel quality - Fuel quality monitoring system (FQMS); German version EN 14274:2013 |
| DIN EN 15199-3:2008-09 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 3: Crude oil |
| DIN EN 15486:2007-11 | Ethanol as a blending component for petrol - Determination of sulfur content - Ultraviolet fluorescence method |
| UNE-EN 16715:2016 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection |
| DIN EN 16423:2014-02 | Liquefied petroleum gases - Determination of dissolved residue - Gas chromatographic method using liquid, on-column injection |
| DIN EN 14104:2003-10 | Fat and oil derivates - Fatty acid methyl esters (FAME) - Determination of acid value |
| UNE-EN 1601:2018 | Liquid petroleum products - Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol - Method by gas chromatography (O-FID) |
| DIN 51825:2004-06 | Lubricants - Lubricating greases K - Classification and requirements |
| DIN EN 15553:2007-07 | Petroleum products and related materials - Determination of hydrocarbon types - Fluorescent indicator adsorption method |
| UNE-EN 15984:2018 | Petroleum industry and products - Determination of composition of refinery heating gas and calculation of carbon content and calorific value - Gas chromatography method |
| DIN EN 14023:2013-04 | Bitumen and bituminous binders - Specification framework for polymer modified bitumens |
| DIN EN 14865-2:2011-01 | Railway applications - Axlebox lubricating greases - Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h (includes Amendment A2:2010) |
| DIN EN 14214:2014-06 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| DIN EN 16476:2014-07 | Liquid petroleum products - Determination of Sodium, Potassium, Calcium, Phosphorus, Copper and Zinc contents in diesel fuel - Method via Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES) |
| DIN EN 15484:2007-11 | Ethanol as a blending component for petrol - Determination of inorganic chloride - Potentiometric method |
| DIN EN 14105:2011-07 | Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of free and total glycerol and mono-, di-, triglyceride contents |
| DIN EN 15837:2010-04 | Ethanol as a blending component for petrol - Determination of phosphorus, copper and sulfur content - Direct method by inductively coupled plasma optical emission spectrometry (ICP OES) |
| DIN EN 16144:2012-05 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Fixed range injection period, constant volume combustion chamber method |
| DIN EN 15199-4:2015-12 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 4: Light fractions of crude oil |
| DIN EN 15488:2007-11 | Ethanol as a blending component for petrol - Determination of copper content - Graphite furnace atomic absorption spectrometric method |
| DIN EN 15779:2013-12 | Petroleum products and fat and oil derivates - Fatty acid methyl esters (FAME) for diesel engines - Determination of polyunsaturated (<groesser |
| DIN EN 15199-2:2007-01 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 2: Heavy distillates and residual fuels |
| DIN EN 589:2012-06 | AUTOMOTIVE FUELS - LPG - REQUIREMENTS AND TEST METHODS |
| DIN EN 15984:2016-05 (Draft) | PETROLEUM INDUSTRY AND PRODUCTS - DETERMINATION OF COMPOSITION OF REFINERY HEATING GAS AND CALCULATION OF CARBON CONTENT AND CALORIFIC VALUE - GAS CHROMATOGRAPHY METHOD |
| DIN EN 14865-1:2011-01 | Railway applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate (includes Amendment A1:2010) |
| DIN EN 15944:2011-02 | Liquid petroleum products - Determination of nickel and vanadium content - Inductively coupled plasma optical emission spectrometry method (ICP OES) |
| DIN EN 15692:2009-08 | Ethanol as a blending component for petrol - Determination of water content - Karl Fischer potentiometric titration method |
| DIN EN 15984:2017-10 | Petroleum industry and products - Determination of composition of refinery heating gas and calculation of carbon content and calorific value - Gas chromatography method |
| DIN EN 15938:2010-12 | Automotive fuels - Ethanol blending component and ethanol (E85) automotive fuel - Determination of electrical conductivity |
| DIN EN 15490:2007-11 | Ethanol as a blending component for petrol - Determination of pHe |
| BS EN 15376:2014 | Automotive fuels. Ethanol as a blending component for petrol. Requirements and test methods |
| DD CEN/TS 15293:2011 | Automotive fuels. Ethanol (E85) automotive fuel. Requirements and test methods |
| BS EN 16709 : 2015 | AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS |
| BS EN 15486:2007 | Ethanol as a blending component for petrol. Determination of sulfur content. Ultraviolet fluorescence method |
| BS EN 15488:2007 | Ethanol as a blending component for petrol. Determination of copper content. Graphite furnace atomic absorption spectrometric method |
| PD CEN/TR 15160:2005 | Petroleum and related products. Applicability of diesel fuel test methods for fatty acid methyl esters (FAME). Information and results on round robin tests |
| DIN EN 16900:2015-09 (Draft) | FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS |
| BS EN 14023:2010 | Bitumen and bituminous binders. Specification framework for polymer modified bitumens |
| BS EN 15489:2007 | Ethanol as a blending component for petrol. Determination of water content. Karl Fischer coulometric titration method |
| I.S. EN 16091:2011 | LIQUID PETROLEUM PRODUCTS - MIDDLE DISTILLATES AND FATTY ACID METHYL ESTER (FAME) FUELS AND BLENDS - DETERMINATION OF OXIDATION STABILITY BY RAPID SMALL SCALE OXIDATION METHOD |
| DIN EN 228:2004-03 | AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS |
| I.S. EN 16329:2013 | DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - LINEAR COOLING BATH METHOD |
| PD CEN/TR 15138:2005 | Petroleum products and other liquids. Guide to flash point testing |
| BS EN 14517:2004 | Methods of test for petroleum and its products. BS 2000-526: Liquid petroleum products. Determination of hydrocarbon types and oxygenates in petrol. Multidimensional gas chromatography method |
| BS EN 14106:2003 | Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of free glycerol content |
| BS EN 16715:2015 | Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels. Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection |
| BS EN 16761-1:2015 | Automotive fuels. Determination of methanol in automotive ethanol (E85) fuel by gas chromatography Method using single column technique |
| BS EN 13924:2006 | Bitumen and bituminous binders. Specifications for hard paving grade bitumens |
| BS EN 16270:2015 | Automotive fuels. Determination of high-boiling components including fatty acid methyl esters in petrol and ethanol (E85) automotive fuel. Gas chromatographic method |
| DIN EN 228:2017-08 | AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS |
| BS EN 15938:2010 | Automotive fuels. Ethanol blending component and ethanol (E85) automotive fuel. Determination of electrical conductivity |
| BS EN 16423:2013 | Liquefied petroleum gases. Determination of dissolved residue. Gas chromatographic method using liquid, on-column injection |
| BS EN 15487:2007 | Ethanol as a blending component for petrol. Determination of phosphorus content. Ammonium molybdate spectrometric method |
| PD CEN/TR 15745:2015 | Liquid petroleum products. Determination of hydrocarbon types and oxygenates via multidimensional gas chromatography method. Round Robin research report |
| PD CEN/TR 16366:2012 | Liquid petroleum products. Middle distillates and fatty acid methyl ester (FAME) fuels and blends. Round Robin report on applicability of Rapid Small Scale Oxidation Test method |
| BS EN 16761-2:2015 | Automotive fuels. Determination of methanol in automotive ethanol (E85) fuel by gas chromatography Method using heart cut technique |
| BS EN 14077:2003 | Petroleum products. Determination of organic halogen content. Oxidative microcoulometric method |
| BS EN 14213:2003 | Heating fuels. Fatty acid methyl esters (FAME). Requirements and test methods |
| BS EN 16576:2014 | Automotive fuels. Determination of manganese and iron content in diesel. Inductively coupled plasma optical emission spectrometry (ICP OES) method |
| BS EN 14832:2005 | Petroleum and related products. Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids |
| BS EN 116:2015 | Diesel and domestic heating fuels. Determination of cold filter plugging point. Stepwise cooling bath method |
| PD CEN/TR 15139:2005 | Petroleum products and other liquids. Applicability of test methods on sulfur determination in petrol and diesel fuel |
| PD CEN/TR 16389:2017 | Automotive fuels. Paraffinic diesel fuel and blends with FAME. Background to the parameters required and their respective limits and determination |
| BS EN 15484:2007 | Ethanol as a blending component for petrol. Determination of inorganic chloride. Potentiometric method |
| BS EN 14109:2003 | Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of potassium content by atomic absorption spectrometry |
| BS EN 15691:2009 | Ethanol as a blending component for petrol. Determination of total dry residue (involatile material). Gravimetric method |
| BS EN 14107:2003 | Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of phosphorous content by inductively coupled plasma (ICP) emission spectrometry |
| BS EN 15485:2007 | Ethanol as a blending component for petrol. Determination of sulfur content. Wavelength dispersive X-ray fluorescence spectrometric method |
| PD CEN/TR 16885:2015 | Liquid petroleum products. Investigation on test method for measurement of the oxidation stability of diesel and diesel/FAME blends by Acid Number after ageing |
| BS EN 14833:2005 | Petroleum and related products. Determination of the hydrolytic stability of fire-resistant phosphate ester fluids |
| BS EN 14108:2003 | Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of sodium content by atomic absorption spectrometry |
| BS EN 14274:2013 | Automotive fuels. Assessment of petrol and diesel quality. Fuel quality monitoring system (FQMS) |
| BS EN 14078:2014 | Liquid petroleum products. Determination of fatty acid methyl ester (FAME) content in middle distillates. Infrared spectrometry method |
| BS EN 12766-2:2001 | Methods of test for petroleum and its products. Petroleum products and used oils. Determination of PCBs and related products Calculation of polychlorinated biphenyl (PCB) content |
| BS EN 15751:2014 | Automotive fuels. Fatty acid methyl ester (FAME) fuel and blends with diesel fuel. Determination of oxidation stability by accelerated oxidation method |
| BS EN 16143:2013 | Petroleum products. Determination of content of Benzo(a)pyrene (BaP) and selected polycyclic aromatic hydrocarbons (PAH) in extender oils. Procedure using double LC cleaning and GC/MS analysis |
| BS EN 12766-3:2004 | Petroleum products and used oils. Determination of PCBs and related products Determination and quantification of polychlorinated terphenyls (PCT) and polychlorinated benzyl toluenes (PCBT) content by gas chromatography (GC) using an electron capture detector (ECD) |
| BS EN 15837:2009 | Ethanol as a blending component for petrol. Determination of phosphorus, copper and sulfur content. Direct method by inductively coupled plasma optical emission spectrometry (ICP OES) |
| BS EN 15490:2007 | Ethanol as a blending component for petrol. Determination of pHe |
| I.S. EN 12849:2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF PENETRATION POWER OF BITUMINOUS EMULSIONS |
| I.S. EN 228:2017 | AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS |
| I.S. EN 15984:2017 | PETROLEUM INDUSTRY AND PRODUCTS - DETERMINATION OF COMPOSITION OF REFINERY HEATING GAS AND CALCULATION OF CARBON CONTENT AND CALORIFIC VALUE - GAS CHROMATOGRAPHY METHOD |
| S.R. CEN/TR 16389:2017 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL AND BLENDS WITH FAME - BACKGROUND TO THE PARAMETERS REQUIRED AND THEIR RESPECTIVE LIMITS AND DETERMINATION |
| I.S. EN 12591:2009 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS |
| I.S. EN 15940:2016 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
| I.S. EN 15470:2017 | LIQUEFIED PETROLEUM GASES - DETERMINATION OF DISSOLVED RESIDUES - HIGH TEMPERATURE GAS CHROMATOGRAPHIC METHOD |
| I.S. EN 13924-1:2015 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 1: HARD PAVING GRADE BITUMENS |
| I.S. EN 590:2013+A1:2017&LC:2017 | AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS |
| EN 15692:2009 | Ethanol as a blending component for petrol - Determination of water content - Karl Fischer potentiometric titration method |
| EN 15199-4:2015 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 4: Light fractions of crude oil |
| I.S. EN 15199-4:2015 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 4: LIGHT FRACTIONS OF CRUDE OIL |
| I.S. EN 15490:2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHE |
| I.S. EN 15489:2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER COULOMETRIC TITRATION METHOD |
| I.S. EN 14106:2003 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF FREE GLYCEROL CONTENT |
| I.S. EN 15779:2009 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>=4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY |
| I.S. EN 14107:2003 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF PHOSPHORUS CONTENT BY INDUCTIVELY COUPLED PLASMA (ICP) EMISSION SPECTROMETRY |
| I.S. EN 12766-2:2001 | PETROLEUM PRODUCTS AND USED OILS - DETERMINATION OF PCBS AND RELATED PRODUCTS - PART 2: CALCULATION OF POLYCHLORINATED BIPHENYL (PCB) CONTENT |
| UNE-EN 16091:2012 | Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Determination of oxidation stability by rapid small scale oxidation method |
| UNE-EN 14112:2017 | Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of oxidation stability (accelerated oxidation test) |
| UNE-EN 589:2009 | Automotive fuels - LPG - Requirements and test methods |
| UNE-EN 14078:2014 | Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method |
| UNE-EN 15470:2017 | Liquefied petroleum gases - Determination of dissolved residues - High temperature Gas chromatographic method |
| UNE-EN 16144:2012 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Fixed range injection period, constant volume combustion chamber method |
| UNE-EN 16761-1:2016 | Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 1: Method using single column technique |
| UNE-EN 16900:2017 | Fast pyrolysis bio-oils for industrial boilers - Requirements and test methods |
| DIN EN 14077:2004-03 | Petroleum products - Determination of organic halogen content - Oxidative microcoulometric method; German version EN 14077:2003 |
| UNE-EN 15944:2011 | Liquid petroleum products - Determination of nickel and vanadium content - Inductively coupled plasma optical emission spectrometry method (ICP OES) |
| UNE-EN 15751:2014 | Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method |
| DIN EN 590:2017-10 | Automotive fuels - Diesel - Requirements and test methods (includes Amendment :2017) |
| DIN EN 15199-1:2007-01 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 1: Middle distillates and lubricating base oils |
| DIN EN 16715:2015-10 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection |
| DIN EN 16091:2012-02 | Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Determination of oxidation stability by rapid small scale oxidation method |
| DIN EN 15485:2007-11 | Ethanol as a blending component for petrol - Determination of sulfur content - Wavelength dispersive X-ray fluorescence spectrometric method |
| EN 16906:2017 | Liquid petroleum products - Determination of the ignition quality of diesel fuels - BASF engine method |
| EN 14103:2011 | Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of ester and linolenic acid methyl ester contents |
| EN 16709:2015/AC:2016 | AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS |
| EN 16576 : 2014 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN DIESEL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| BS EN 12849:2009 | Bitumen and bituminous binders. Determination of penetration power of bituminous emulsions |
| EN 17057:2018 | Automotive fuels and fat and oil derivates - Determination of saturated monoglycerides content in Fatty Acid Methyl Esters (FAME) - Method by GC-FID |
| UNI EN 15751 : 2014 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
| 01/105972 DC : DRAFT JULY 2001 | BS EN 14023 - BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR POLYMER MODIFIED BITUMENS |
| UNI EN 15938 : 2010 | AUTOMOTIVE FUELS - ETHANOL BLENDING COMPONENT AND ETHANOL (E85) AUTOMOTIVE FUEL - DETERMINATION OF ELECTRICAL CONDUCTIVITY |
| UNI EN 15779 : 2013 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>=4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY |
| UNI EN 12847 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SETTLING TENDENCY OF BITUMINOUS EMULSIONS |
| BS EN 16734 : 2016 | AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS |
| UNI EN 12848 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF MIXING STABILITY WITH CEMENT OF BITUMINOUS EMULSIONS |
| UNI EN 14274 : 2013 | AUTOMOTIVE FUELS - ASSESSMENT OF PETROL AND DIESEL QUALITY - FUEL QUALITY MONITORING SYSTEM (FQMS) |
| UNI EN 15195 : 2015 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
| UNI EN 14078 : 2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| UNI EN 14105 : 2011 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF FREE AND TOTAL GLYCEROL AND MONO-, DI-, TRIGLYCERIDE CONTENTS |
| BS EN 16997:2017 | Liquid petroleum products. Determination of the sulfur content in Ethanol (E85) automotive fuel. Wavelength dispersive X-ray fluorescence spectrometric method |
| UNI EN 12849 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF PENETRATION POWER OF BITUMINOUS EMULSIONS |
| UNI EN 14865-2 : 2011 | RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 2: METHOD TO TEST THE MECHANICAL STABILITY TO COVER VEHICLE SPEEDS UP TO 200 KM/H |
| BS EN 16934:2017 | Automotive fuels and fat and oil derivates, Determination of steryl glycosides in fatty acid methyl esters (FAME). Method by GC-MS with prior purification by SPE |
| UNI EN 15492 : 2012 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULPHATE CONTENT - ION CHROMATOGRAPHIC METHOD |
| UNI EN 14865-1 : 2011 | RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 1: METHOD TO TEST THE ABILITY TO LUBRICATE |
| UNI EN 15691 : 2009 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF DRY RESIDUE (INVOLATILE MATERIAL) - GRAVIMETRIC METHOD |
| UNI EN 16476 : 2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF SODIUM, POTASSIUM, CALCIUM, PHOSPHORUS, COPPER AND ZINC CONTENTS IN DIESEL FUEL - METHOD VIA INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) |
| UNI EN 14023 : 2010 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR POLYMER MODIFIED BITUMENS |
| UNI EN 15721 : 2013 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND OTHER IMPURITIES - GAS CHROMATOGRAPHIC METHOD |
| UNI EN 15944 : 2011 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF NICKEL AND VANADIUM CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY METHOD (ICP OES) |
| UNI EN 16135 : 2012 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| UNI EN 14103 : 2011 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF ESTER AND LINOLENIC ACID METHYL ESTER CONTENTS |
| BS EN 12662:2014 | Liquid petroleum products. Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters |
| IP 486 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF MIXING STABILITY WITH CEMENT OF BITUMINOUS EMULSIONS |
| UNI EN 12662 : 2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS |
| UNI EN 12697-3 : 2013 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 3: BITUMEN RECOVERY: ROTARY EVAPORATOR |
| EN 16934:2017 | Automotive fuels and fat and oil derivates - Determination of steryl glycosides in fatty acid methyl esters (FAME) - Method by GC-MS with prior purification by SPE |
| UNI EN 15837 : 2010 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS, COPPER AND SULFUR CONTENT - DIRECT METHOD BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP-OES) |
| UNI EN 13924-2 : 2014 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 2: MULTIGRADE PAVING GRADE BITUMENS |
| UNI EN 16143 : 2013 | PETROLEUM PRODUCTS - DETERMINATION OF CONTENT OF BENZO(A)PYRENE (BAP) AND SELECTED POLYCYCLIC AROMATIC HYDROCARBONS (PAH) IN EXTENDER OILS - PROCEDURE USING DOUBLE LC CLEANING AND GC/MS ANALYSIS |
| UNI EN 14214 : 2014 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| UNI EN 16423 : 2013 | LIQUEFIED PETROLEUM GASES - DETERMINATION OF DISSOLVED RESIDUE - GAS CHROMATOGRAPHIC METHOD USING LIQUID, ON-COLUMN INJECTION |
| UNI EN 16294 : 2013 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATIVES - DETERMINATION OF PHOSPHORUS CONTENT IN FATTY ACID METHYL ESTERS (FAME) - OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES) |
| BS EN ISO 6245:2002 | Methods of test for petroleum and its products. BS 2000-4: Determination of ash |
| 10/30205520 DC : 0 | BS EN 16144 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - FIXED RANGE INJECTION PERIOD, CONSTANT VOLUME COMBUSTION CHAMBER METHOD |
| UNI EN 12591 : 2009 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS |
| S.R. CEN/TR 15745:2015 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF HYDROCARBON TYPES AND OXYGENATES VIA MULTIDIMENSIONAL GAS CHROMATOGRAPHY METHOD - ROUND ROBIN RESEARCH REPORT |
| I.S. EN 14214:2012 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 14023:2010 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR POLYMER MODIFIED BITUMENS |
| I.S. EN 15376:2014 | AUTOMOTIVE FUELS - ETHANOL AS A BLENDING COMPONENT FOR PETROL - REQUIREMENTS AND TEST METHODS |
| I.S. EN 12697-3:2013 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 3: BITUMEN RECOVERY: ROTARY EVAPORATOR |
| I.S. CWA 15293:2005 | AUTOMOTIVE FUELS - ETHANOL E85 - REQUIREMENTS AND TEST METHODS |
| I.S. EN 15195:2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
| I.S. EN 12847:2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SETTLING TENDENCY OF BITUMINOUS EMULSIONS |
| I.S. EN 15199-1:2006 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 1: MIDDLE DISTILLATES AND LUBRICATING BASE OILS |
| I.S. EN 12848:2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF MIXING STABILITY WITH CEMENT OF BITUMINOUS EMULSIONS |
| I.S. EN 15751:2014 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
| I.S. EN 589:2008 | AUTOMOTIVE FUELS - LPG - REQUIREMENTS AND TEST METHODS |
| I.S. EN 15692:2009 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD |
| UNE-EN 14214:2013 | Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines and heating applications - Requirements and test methods |
| UNE-EN 16997:2017 | Liquid petroleum products - Determination of the sulfur content in Ethanol (E85) automotive fuel- Wavelength dispersive X-ray fluorescence spectrometric method |
| UNE-EN 16709:2016 | Automotive fuels - High FAME diesel fuel (B20 and B30) - Requirements and test methods |
| UNE-EN 12697-3:2013 | Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen recovery: Rotary evaporator |
| UNE-EN 15376:2015 | Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods |
| UNE-EN 116:2015 | Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method |
| UNE-EN 16934:2018 | Automotive fuels and fat and oil derivates - Determination of steryl glycosides in fatty acid methyl esters (FAME) - Method by GC-MS with prior purification by SPE |
| UNE-EN 15199-4:2015 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 4: Light fractions of crude oil |
| UNE-EN 16734:2017 | Automotive fuels - Automotive B10 diesel fuel - Requirements and test methods |
| UNE-EN 15940:2016 | Automotive fuels - Paraffinic diesel fuel from synthesis or hydrotreatment - Requirements and test methods |
| UNE-EN 16294:2013 | Petroleum products and fat and oil derivatives - Determination of phosphorus content in fatty acid methyl esters (FAME) - Optical emission spectral analysis with inductively coupled plasma (ICP OES) |
| UNE-EN 15721:2014 | Ethanol as a blending component for petrol - Determination of higher alcohols, methanol and other impurities - Gas chromatographic method |
| UNE-EN 16136:2015 | Automotive fuels - Determination of manganese and iron content in unleaded petrol - Inductively coupled plasma optical emission spectrometry (ICP OES) method |
| UNE-EN 16270:2015 | Automotive fuels - Determination of high-boiling components including fatty acid methyl esters in petrol and ethanol (E85) automotive fuel - Gas chromatographic method |
| UNE-EN 16761-2:2016 | Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 2: Method using heart cut technique |
| UNE-EN 16329:2013 | Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method |
| UNE-EN 13924-1:2016 | Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 1: Hard paving grade bitumens |
| UNE-EN 16896:2017 | Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscosimeter |
| UNE-EN 15938:2011 | Automotive fuels - Ethanol blending component and ethanol (E85) automotive fuel - Determination of electrical conductivity |
| DIN EN 14078:2014-09 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| EN 16294:2012 | Petroleum products and fat and oil derivatives - Determination of phosphorus content in fatty acid methyl esters (FAME) - Optical emission spectral analysis with inductively coupled plasma (ICP OES) |
| EN 16144:2012 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Fixed range injection period, constant volume combustion chamber method |
| EN 15489:2007 | Ethanol as a blending component for petrol - Determination of water content - Karl Fischer coulometric titration method |
| EN 14865-1:2009+A1:2010 | Railway applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate |
| BS EN 14111:2003 | Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of iodine value |
| EN 1601:2017 | Liquid petroleum products - Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol - Method by gas chromatography (O-FID) |
| EN 15199-2:2006 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 2: Heavy distillates and residual fuels |
| EN 16997:2017 | Liquid petroleum products - Determination of the sulfur content in Ethanol (E85) automotive fuel- Wavelength dispersive X-ray fluorescence spectrometric method |
| EN 14213:2003/AC:2003 | HEATING FUELS - FATTY ACID METHYL ESTERS (FAME) - REQUIREMENTS AND TEST METHODS |
| BS 2000-508(2013) : 2013 COR 2015 | AUTOMOTIVE FUELS - ASSESSMENT OF PETROL AND DIESEL QUALITY - FUEL QUALITY MONITORING SYSTEM (FQMS) |
| EN 16270:2015 | Automotive fuels - Determination of high-boiling components including fatty acid methyl esters in petrol and ethanol (E85) automotive fuel - Gas chromatographic method |
| IP 309 : 2016 | DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - STEPWISE COOLING BATH METHOD |
| EN 15488:2007 | Ethanol as a blending component for petrol - Determination of copper content - Graphite furnace atomic absorption spectrometric method |
| BS EN 12848:2009 | Bitumen and bituminous binders. Determination of mixing stability with cement of bituminous emulsions |
| EN 14078:2014 | Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method |
| EN 15199-3:2008 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 3: Crude oil |
| EN 14108:2003 | Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of sodium content by atomic absorption spectrometry |
| EN 15779:2009+A1:2013 | Petroleum products and fat and oil derivates - Fatty acid methyl esters (FAME) for diesel engines - Determination of polyunsaturated (≥4 double bonds) fatty acid methyl esters (PUFA) by gas chromatography |
| EN 13924:2006/AC:2006 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR HARD PAVING GRADE BITUMENS |
| EN 15490:2007 | Ethanol as a blending component for petrol - Determination of pHe |
| EN 15486:2007 | Ethanol as a blending component for petrol - Determination of sulfur content - Ultraviolet fluorescence method |
| EN 15470:2017 | Liquefied petroleum gases - Determination of dissolved residues - High temperature Gas chromatographic method |
| EN 14517:2004 | Liquid petroleum products - Determination of hydrocarbon types and oxygenates in petrol - Multidimensional gas chromatography method |
| EN 16423:2013 | Liquefied petroleum gases - Determination of dissolved residue - Gas chromatographic method using liquid, on-column injection |
| EN 14112:2016 | Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of oxidation stability (accelerated oxidation test) |
| EN 14832:2005 | Petroleum and related products - Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids |
| EN 590:2013 | Automotive fuels - Diesel - Requirements and test methods |
| EN 14109:2003 | Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of potassium content by atomic absorption spectrometry |
| BS 2000-574(2014) : 2014 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
| IP 578 : 2015 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>= 4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY |
| EN 16329:2013 | Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method |
| EN 15487:2007 | Ethanol as a blending component for petrol - Determination of phosphorus content - Ammonium molybdate spectrometric method |
| IP 487 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF PENETRATION POWER OF BITUMINOUS EMULSIONS |
| IP 606 : 2016 | AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHIC METHOD |
| EN 15376:2014 | Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods |
| UNI EN 589 : 2013 | AUTOMOTIVE FUELS - LPG - REQUIREMENTS AND TEST METHODS |
| EN 15471:2017 | Liquefied petroleum gases - Determination of dissolved residues - High-temperature gravimetric method |
| EN 14023:2010 | Bitumen and bituminous binders - Specification framework for polymer modified bitumens |
| EN 15199-1:2006 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 1: Middle distillates and lubricating base oils |
| EN 15721:2013 | Ethanol as a blending component for petrol - Determination of higher alcohols, methanol and other impurities - Gas chromatographic method |
| IP 608 : 2015 | DETERMINATION OF MERCURY IN BURNER FUELS DERIVED FROM WASTE MINERAL OILS - WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY METHOD |
| EN 15751:2014 | Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method |
| EN 16568:2014 | Automotive fuels - Blends of Fatty acid methyl ester (FAME) with diesel fuel - Determination of oxidation stability by rapidly accelerated oxidation method at 120 °C |
| BS EN 16329:2013 | Diesel and domestic heating fuels. Determination of cold filter plugging point. Linear cooling bath method |
| EN 15484:2007 | Ethanol as a blending component for petrol - Determination of inorganic chloride - Potentiometric method |
| EN 15195:2014 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber |
| EN 16761-1:2015 | Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 1: Method using single column technique |
| EN 14104:2003 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF ACID VALUE |
| EN 14274:2013/AC:2013 | AUTOMOTIVE FUELS - ASSESSMENT OF PETROL AND DIESEL QUALITY - FUEL QUALITY MONITORING SYSTEM (FQMS) |
| EN 13924-1:2015 | Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 1: Hard paving grade bitumens |
| EN 15938:2010 | Automotive fuels - Ethanol blending component and ethanol (E85) automotive fuel - Determination of electrical conductivity |
| EN 15691:2009 | Ethanol as a blending component for petrol - Determination of dry residue (involatile material) - Gravimetric method |
| EN 589:2008+A1:2012 | Automotive fuels - LPG - Requirements and test methods |
| EN 16136:2015 | Automotive fuels - Determination of manganese and iron content in unleaded petrol - Inductively coupled plasma optical emission spectrometry (ICP OES) method |
| EN 16143:2013 | Petroleum products - Determination of content of Benzo(a)pyrene (BaP) and selected polycyclic aromatic hydrocarbons (PAH) in extender oils - Procedure using double LC cleaning and GC/MS analysis |
| EN 14111:2003 | Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of iodine value |
| EN 228:2012+A1:2017 | Automotive fuels - Unleaded petrol - Requirements and test methods |
| BS EN 15944:2010 | Liquid petroleum products. Determination of nickel and vanadium content. Inductively coupled plasma optical emission spectrometry method (ICP OES) |
| EN 16091:2011 | Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Determination of oxidation stability by rapid small scale oxidation method |
| EN 15944:2010 | Liquid petroleum products - Determination of nickel and vanadium content - Inductively coupled plasma optical emission spectrometry method (ICP OES) |
| BS EN 16135:2011 | Automotive fuels. Determination of manganese content in unleaded petrol. Flame atomic absorption spectrometric method (FAAS) |
| BS EN 16568:2014 | Automotive fuels. Blends of Fatty acid methyl ester (FAME) with diesel fuel. Determination of oxidation stability by rapidly accelerated oxidation method at 120 °C |
| BS EN 16900:2017 | Fast pyrolysis bio-oils for industrial boilers. Requirements and test methods |
| EN 14077:2003 | Petroleum products - Determination of organic halogen content - Oxidative microcoulometric method |
| EN 15837:2009 | Ethanol as a blending component for petrol - Determination of phosphorus, copper and sulfur content - Direct method by inductively coupled plasma optical emission spectrometry (ICP OES) |
| BS 2000-456(2000) : 2000 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF POTASSIUM IN GASOLINE - ATOMIC ABSORPTION SPECTROMETRY (AAS) METHOD |
| IP 508 : 2016 | AUTOMOTIVE FUELS - ASSESSMENT OF PETROL AND DIESEL QUALITY - FUEL QUALITY MONITORING SYSTEM (FQMS) |
| EN 14106:2003 | Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of free glycerol content |
| EN 15485:2007 | Ethanol as a blending component for petrol - Determination of sulfur content - Wavelength dispersive X-ray fluorescence spectrometric method |
| IP 485 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SETTLING TENDENCY OF BITUMINOUS EMULSIONS |
| IP 498 : 2015 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
| EN 14865-2:2006+A2:2010 | Railway applications - Axlebox lubricating greases - Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h |
| BS 2000-129(2003) : 2003 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 129: DETERMINATION OF BROMINE NUMBER - COLOUR INDICATOR TITRATION METHOD |
| EN 16715 : 2015 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - IGNITION DELAY AND COMBUSTION DELAY DETERMINATION USING A CONSTANT VOLUME COMBUSTION CHAMBER WITH DIRECT FUEL INJECTION |
| EN 15492:2012 | Ethanol as a blending component for petrol - Determination of inorganic chloride and sulfate content - Ion chromatographic method |
| EN 16734:2016 | Automotive fuels - Automotive B10 diesel fuel - Requirements and test methods |
| EN 16761-2 : 2015 | AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 2: METHOD USING HEART CUT TECHNIQUE |
| EN 16135:2011 | Automotive fuels - Determination of manganese content in unleaded petrol - Flame atomic absorption spectrometric method (FAAS) |
| EI HM 68 : 2011 | PROCEDURES FOR BULK LIQUID FATTY ACID METHYL ESTERS (FAME) AND BLENDED BIODIESEL CARGO INSPECTIONS |
| IP 615 : 2016 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - IGNITION DELAY AND COMBUSTION DELAY DETERMINATION USING A CONSTANT VOLUME COMBUSTION CHAMBER WITH DIRECT FUEL INJECTION |
| EN ISO 6245:2002 | Petroleum products - Determination of ash (ISO 6245:2001) |
| EN 13924-2:2014 | Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 2: Multigrade paving grade bitumens |
| EN 14107:2003 | Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of phosphorus content by inductively coupled plasma (ICP) emission spectrometry |
| EN 14110:2003 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF METHANOL CONTENT |
| EN 16900:2017 | Fast pyrolysis bio-oils for industrial boilers - Requirements and test methods |
| EN 16476:2014 | Liquid petroleum products - Determination of Sodium, Potassium, Calcium, Phosphorus, Copper and Zinc contents in diesel fuel - Method via Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES) |
| EN 14833:2005 | Petroleum and related products - Determination of the hydrolytic stability of fire-resistant phosphate ester fluids |
| I.S. EN 15199-3:2008 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 3: CRUDE OIL |
| I.S. EN 14103:2011 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF ESTER AND LINOLENIC ACID METHYL ESTER CONTENTS |
| S.R. CEN TS 15293:2011 | AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL - REQUIREMENTS AND TEST METHODS |
| S.R. CEN/TS 15940:2012 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
| I.S. EN 13924:2006 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR HARD PAVING GRADE BITUMENS |
| I.S. EN 15721:2013 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND OTHER IMPURITIES - GAS CHROMATOGRAPHIC METHOD |
| S.R. CWA 15940:2009 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
| I.S. EN 15471:2017 | LIQUEFIED PETROLEUM GASES - DETERMINATION OF DISSOLVED RESIDUES - HIGH-TEMPERATURE GRAVIMETRIC METHOD |
| I.S. EN 16734:2016 | AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS |
| I.S. EN 1601:2017 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT IN UNLEADED PETROL - METHOD BY GAS CHROMATOGRAPHY (O-FID) |
| I.S. EN 15488:2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF COPPER CONTENT - GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRIC METHOD |
| I.S. EN 15553:2007 | PETROLEUM PRODUCTS AND RELATED MATERIALS - DETERMINATION OF HYDROCARBON TYPES - FLUORESCENT INDICATOR ADSORPTION METHOD |
| I.S. EN 14077:2004 | PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC HALOGEN CONTENT - OXIDATIVE MICROCOULOMETRIC METHOD |
| UNI EN 15692 : 2009 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD |
| UNE-EN 15471:2017 | Liquefied petroleum gases - Determination of dissolved residues - High-temperature gravimetric method |
| UNE-EN 12916:2016 | Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection |
| UNE-EN 590:2014 | Automotive fuels - Diesel - Requirements and test methods |
| DIN EN 13924-2:2014-07 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 2: MULTIGRADE PAVING GRADE BITUMENS |
| BS EN 15470:2017 | Liquefied petroleum gases. Determination of dissolved residues. High temperature Gas chromatographic method |
| EN 12766-3:2004/AC:2007 | PETROLEUM PRODUCTS AND USED OILS - DETERMINATION OF PCBS AND RELATED PRODUCTS - PART 3: DETERMINATION AND QUANTIFICATION OF POLYCHLORINATED TERPHENYLS (PCT) AND POLYCHLORINATED BENZYL TOLUENES (PCBT) CONTENT BY GAS CHROMATOGRAPHY (GC) USING AN ELECTRON CAPTURE DETECTOR (ECD) |
| DIN EN 16896:2015-09 (Draft) | PETROLEUM PRODUCTS AND RELATED PRODUCTS - DETERMINATION OF KINEMATIC VISCOSITY - METHOD BY STABINGER TYPE VISCOSIMETER |
| BS EN 15471:2017 | Liquefied petroleum gases. Determination of dissolved residues. High-temperature gravimetric method |
| EN 12591:2009 | Bitumen and bituminous binders - Specifications for paving grade bitumens |
| DIN EN 14832:2005-09 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE OXIDATION STABILITY AND CORROSIVITY OF FIRE-RESISTANT PHOSPHATE ESTER FLUIDS |
| EN 12847:2009 | Bitumen and bituminous binders - Determination of settling tendency of bituminous emulsions |
| CEN/TS 15293:2011 | Automotive fuels - Ethanol (E85) automotive fuel - Requirements and test methods |
| DIN EN 16136:2015-04 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| BS EN 13075-1:2016 | Bitumen and bituminous binders. Determination of breaking behaviour Determination of breaking value of cationic bituminous emulsions, mineral filler method |
| DIN EN 16143:2013-05 | PETROLEUM PRODUCTS - DETERMINATION OF CONTENT OF BENZO(A)PYRENE (BAP) AND SELECTED POLYCYCLIC AROMATIC HYDROCARBONS (PAH) IN EXTENDER OILS - PROCEDURE USING DOUBLE LC CLEANING AND GC/MS ANALYSIS |
| DIN EN 16270:2015-08 | AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHIC METHOD |
| DIN EN 16761-1:2016-02 | AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 1: METHOD USING SINGLE COLUMN TECHNIQUE |
| BS EN 15692:2009 | Ethanol as a blending component for petrol. Determination of water content. Karl Fischer potentiometric titration method |
| DIN EN 1601:2016-06 (Draft) | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT IN UNLEADED PETROL - METHOD BY GAS CHROMATOGRAPHY (O-FID) |
| BS EN 15553:2007 | Petroleum products and related materials. Determination of hydrocarbon types. Fluorescent indicator adsorption method |
| DIN EN 15471:2016-01 (Draft) | LIQUEFIED PETROLEUM GASES - DETERMINATION OF DISSOLVED RESIDUES - HIGH-TEMPERATURE GRAVIMETRIC METHOD |
| DIN EN 14107:2003-10 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF PHOSPHORUS CONTENT BY INDUCTIVELY COUPLED PLASMA (ICP) EMISSION SPECTROMETRY |
| DIN EN 15471:2017-09 | LIQUEFIED PETROLEUM GASES - DETERMINATION OF DISSOLVED RESIDUES - HIGH-TEMPERATURE GRAVIMETRIC METHOD |
| EN 15553:2007 | Petroleum products and related materials - Determination of hydrocarbon types - Fluorescent indicator adsorption method |
| DIN EN 15721:2013-12 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND OTHER IMPURITIES - GAS CHROMATOGRAPHIC METHOD |
| DIN EN 16576:2015-02 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN DIESEL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| BS EN 14103:2011 | Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of ester and linolenic acid methyl ester contents |
| DIN EN 13924-1:2016-02 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 1: HARD PAVING GRADE BITUMENS |
| BS EN 15199-4:2015 | Petroleum products. Determination of boiling range distribution by gas chromatography method Light fractions of crude oil |
| BS EN 16091:2011 | Liquid petroleum products. Middle distillates and fatty acid methyl ester (FAME) fuels and blends. Determination of oxidation stability by rapid small scale oxidation method |
| BS EN 14110:2003 | Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of methanol content |
| CEN/TR 16389:2017 | Automotive fuels - Paraffinic diesel fuel and blends with FAME - Background to the parameters required and their respective limits and determination |
| DIN EN 16997:2016-05 (Draft) | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE SULFUR CONTENT IN ETHANOL (E85) AUTOMOTIVE FUEL - WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD |
| DIN EN 16896:2017-02 | PETROLEUM PRODUCTS AND RELATED PRODUCTS - DETERMINATION OF KINEMATIC VISCOSITY - METHOD BY STABINGER TYPE VISCOSIMETER |
| CEN/TR 16514 : 2013 | AUTOMOTIVE FUELS - UNLEADED PETROL CONTAINING MORE THAN 3,7% (M/M) OXYGEN - ROADMAP, TEST METHODS, AND REQUIREMENTS FOR E10+ PETROL |
| CEN/TS 15940 : 2012 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
| EN 12849:2009 | Bitumen and bituminous binders - Determination of penetration power of bituminous emulsions |
| DIN EN 12849:2009-07 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF PENETRATION POWER OF BITUMINOUS EMULSIONS |
| BS EN 14105:2011 | Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of free and total glycerol and mono-, di-, triglyceride contents |
| EN 15491:2007 | Ethanol as a blending component for petrol - Determination of total acidity - Colour indicator titration method |
| BS EN 15491:2007 | Ethanol as a blending component for petrol. Determination of total acidity. Colour indicator titration method |
| CEN/TR 16366:2012 | Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Round Robin report on applicability of Rapid Small Scale Oxidation Test method |
| DIN EN 14110:2003-10 | FAT AND OIL DERIVATIVES - FATTY ACID METHYLESTERS (FAME) - DETERMINATION OF METHANOL CONTENT |
| DIN EN 12847:2009-07 | Bitumen and bituminous binders - Determination of settling tendency of bituminous emulsions |
| BS EN 14112:2003 | Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of oxidation stability (accelerated oxidation test) |
| DIN EN 16568:2015-03 | AUTOMOTIVE FUELS - BLENDS OF FATTY ACID METHYL ESTER (FAME) WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY RAPIDLY ACCELERATED OXIDATION METHOD AT 120 DEGREES C |
| DIN EN 15195:2015-02 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber |
| DIN EN 16906:2015-09 (Draft) | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - BASF ENGINE METHOD |
| DIN EN ISO 6245:2003-01 | PETROLEUM PRODUCTS - DETERMINATION OF ASH |
| DIN EN 15691:2009-07 | Ethanol as a blending component for petrol - Determination of dry residue (involatile material) - Gravimetric method |
| DIN 51619:2004-02 | TESTING OF MINERAL OIL HYDROCARBONS - DETERMINATION OF THE COMPOSITION OF LIQUID PETROLEUM GASES - GAS CHROMATOGRAPHIC ANALYSIS UNDER SPECIAL CONSIDERATION OF 1,3-BUTADIENE WITH MASS FRACTIONS <= 0,1 % (M/M) |
| BS EN 15199-3:2008 | Petroleum products. Determination of boiling range distribution by gas chromatography method Crude oil |
| CEN/TR 15745:2015 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF HYDROCARBON TYPES AND OXYGENATES VIA MULTIDIMENSIONAL GAS CHROMATOGRAPHY METHOD - ROUND ROBIN RESEARCH REPORT |
| UNE-EN 228:2013 | Automotive fuels - Unleaded petrol - Requirements and test methods |
| UNE-EN 15779:2010 | Petroleum products and fat and oil derivates - Fatty acid methyl esters (FAME) for diesel engines - Determination of polyunsaturated (>= 4 double bonds) fatty acid methyl esters (PUFA) by gas chromatography |
| UNE-EN 14865-1:2010 | Railway Applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate |
| BS EN 12846:2002 | Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of efflux time of bitumen emulsions by the efflux viscometer method |
| ISO 3534-2:2006 | Statistics Vocabulary and symbols Part 2: Applied statistics |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.