EN ISO 4589-2:2017
Current
Current
The latest, up-to-date edition.
Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:2017)
Published date
05-10-2017
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Apparatus
6 Calibration of equipment
7 Preparation of test specimens
8 Procedure for determination of oxygen index
9 Calculations and expression of results
10 Comparison with a specified minimum value of
the oxygen index (short procedure)
11 Test report
Annex A (normative) - Calibration of equipment
Annex B (normative) - Calculation of volume fraction
of oxygen
Annex C (informative) - Typical test results sheet
Annex D (informative) - Results obtained by
interlaboratory trials on type VI specimens
Annex E (informative) - Precision data obtained
from an interlaboratory trial carried out in
1978-1980
Bibliography
ISO 4589-2:2017 specifies methods for determining the minimum volume fraction of oxygen, in admixture with nitrogen, that will support combustion of small vertical test specimens under specified test conditions. The results are defined as oxygen index (OI) values.Methods are provided for testing materials that are self-supporting in the form of vertical bars or sheets up to 10,5 mm thick. These methods are suitable for solid, laminated or cellular materials characterized by an apparent density 100 kg/m3 or greater. The methods might also be applicable to some cellular materials having an apparent density of less than 100 kg/m3. A method is provided for testing flexible sheets or film materials while supported vertically.For comparative purposes, a procedure is provided for determining whether or not the OI of a material lies above some specified minimum value.
| Committee |
CEN/TC 249
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| I.S. EN ISO 4589-2:2017 | Identical |
| SS-EN ISO 4589-2:2017 | Identical |
| ISO 4589-2:2017 | Identical |
| PN EN ISO 4589-2 : 2017 | Identical |
| DIN EN ISO 4589-2:2016-03 (Draft) | Identical |
| UNI EN ISO 4589-2 : 2017 | Identical |
| DIN EN ISO 4589-2 E : 2006 | Identical |
| SN EN ISO 4589-2 : 2017 | Identical |
| DIN EN ISO 4589-2 E : 2017 | Identical |
| BS EN ISO 4589-2:2017 | Identical |
| UNI EN ISO 4589-2 : 2008 | Identical |
| NBN EN ISO 4589-2 : 1999 AMD 1 2006 | Identical |
| NEN EN ISO 4589-2 : 2017 | Identical |
| DIN EN ISO 4589-2:2017-11 | Identical |
| NS EN ISO 4589-2 : 2017 | Identical |
| UNE-EN ISO 4589-2:2017 | Identical |
| NF EN ISO 4589-2 : 2017 | Identical |
| CEI UNI EN 45545-2 : 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAUVIOR OF MATERIALS AND COMPONENTS |
| DIN EN 45545-2:2016-02 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| I.S. EN 45545-2:2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| BS EN 45545-2 : 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| XP CEN/TS 45545-2 : 2009 XP | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| I.S. EN 62329-2:2006 | HEAT SHRINKABLE MOULDED SHAPES - PART 2: METHODS OF TEST |
| DIN EN 14598-3:2005-07 | Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements |
| DIN EN 14598-2:2005-07 | Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements |
| CEN/TS 15534-1:2007 | Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products |
| DIN EN 562:2003-09 | GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES |
| EN 60684-2:2011 | Flexible insulating sleeving - Part 2: Methods of test |
| EN 14591-2:2007/AC:2008 | EXPLOSION PREVENTION AND PROTECTION IN UNDERGROUND MINES - PROTECTIVE SYSTEMS - PART 2: PASSIVE WATER TROUGH BARRIERS |
| BS EN 15534-1 : 2014 | COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
| DIN EN 16028:2012-10 | Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications |
| BS ISO 7391-2 : 1996 AMD 10746 | PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DD CEN/TS 15534-1:2007 | Wood-plastics composites (WPC) Test methods for characterisation of WPC materials and products |
| S.R. CEN/TS 45545-2:2009 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| BS EN ISO 15526-2:2004 | Plastics. Polyketone (PK) moulding and extrusion materials Preparation of test specimens and determination of properties |
| BS EN 14598-2:2005 | Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) Methods of test and general requirements |
| EN 45545-2:2013+A1:2015 | Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components |
| I.S. EN ISO 15526-2:2004 | PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| I.S. EN ISO 4894-2:1999 | PLASTICS - STYRENE/ACRYLONITRILE (SAN) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN EN ISO 15526-2:2004-10 | PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| UNI CEI EN 45545-2 : 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAUVIOR OF MATERIALS AND COMPONENTS |
| 10/30216687 DC : 0 | BS EN 45545-2 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| BS EN 60684-2:2011 | Flexible insulating sleeving Methods of test |
| BS EN 62329-2:2006 | Heat shrinkable moulded shapes Methods of test |
| BS EN 16028:2012 | Railway applications. Wheel/rail friction management. Lubricants for trainborne and trackside applications |
| I.S. EN 16028:2012 | RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS |
| BS EN 14591-2:2007 | Explosion prevention and protection in underground mines. Protective systems Passive water trough barriers |
| UNI EN 16028 : 2012 | RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS |
| I.S. EN 562:2003 | GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES |
| I.S. EN 60684-2:2011 | FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST (IEC 60684-2:2011) |
| 12/30266170 DC : 0 | BS EN 15534-1 - COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1 : TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
| UNI CEI CEN/TS 45545-2 : 2009 | RAILWAY APPLICATIONS - FIRE PROTECTION OF RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| DD CEN/TS 15534-2:2007 | Wood-plastics composites (WPC) Characterisation of WPC materials |
| DD CEN/TS 45545-2:2009 | Railway applications. Fire protection on railway vehicles Requirements for fire behaviour of materials and components |
| S.R. CEN/TS 15534-2:2007 | WOOD-PLASTICS COMPOSITES (WPC) - PART 2: CHARACTERISATION OF WPC MATERIALS |
| UNE-EN 16028:2013 | Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications |
| BS EN ISO 3672-2:2001 | Plastics. Unsaturated-polyester resins (UP-R) Preparation of test specimens and determination of properties |
| ISO 4894-2:1995 | Plastics Styrene/acrylonitrile (SAN) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| ISO 3672-2:2000 | Plastics — Unsaturated-polyester resins (UP-R) — Part 2: Preparation of test specimens and determination of properties |
| BS EN 14598-3:2005 | Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) Specific requirements |
| EN ISO 15252-2 : 1999 | PLASTICS - EPOXY POWDER MOULDING COMPOUNDS (EP-PMCS) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| EN ISO 15526-2:2004 | Plastics - Polyketone (PK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 15526-2:2000) |
| EN 14598-2:2005/AC:2006 | REINFORCED THERMOSETTING MOULDING COMPOUNDS - SPECIFICATION FOR SHEET MOULDING COMPOUND (SMC) AND BULK MOULDING COMPOUND (BMC) - PART 2: METHODS OF TEST AND GENERAL REQUIREMENTS |
| EN ISO 14529-2 : 1999 | PLASTICS - MELAMINE/PHENOLIC POWDER MOULDING COMPOUNDS (MP-PMCS) - PART 2 - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| EN 16028:2012 | Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications |
| EN ISO 3672-2 : 2001 | PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| EN ISO 14530-2 : 1999 | PLASTICS - UNSATURATED-POLYESTER POWDER MOULDING COMPOUNDS (UP-PMCS) - PART 2 - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| EN ISO 4894-2 : 1999 | PLASTICS - STYRENE/ACRYLONITRILE (SAN) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| EN ISO 14528-2 : 1999 | PLASTICS - MELAMINE/PHENOLIC POWDER MOULDING COMPOUNDS (MP-PMCS) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| EN 14598-3:2005 | Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements |
| EN 562 : 2003 | GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES |
| EN ISO 14527-2 : 1999 | PLASTICS - UREA-FORMALDEHYDE AND UREA/MELAMINE-FORMALDEHYDE POWDER MOULDING COMPOUNDS (UF- AND UF/MF-PMCS) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN EN 16028 E : 2012 | RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS |
| CEI EN 60684-2 : 2012 | FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST |
| 04/19990095 DC : 0 | BS EN 45545-2 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| UNE-EN 45545-2:2013 | Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behavior of materials and components |
| I.S. EN 15534-1:2014 | COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
| BS EN ISO 12215-2:2002 | Small craft. Hull construction and scantlings Materials. Core materials for sandwich construction, embedded materials |
| S.R. CEN TS 15534-1:2007 | WOOD-PLASTICS COMPOSITES (WPC) - PART 1: TEST METHODS FOR CHARACTERISATION OF WPC MATERIALS AND PRODUCTS |
| DIN EN 14591-2:2007-07 | Explosion prevention and protection in underground mines - Protective systems - Part 2: Passive water trough barriers |
| UNE-EN 60695-1-21:2017 | Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods |
| ISO 15526-2:2000 | Plastics Polyketone (PK) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| 02/124519 DC : DRAFT DEC 2002 | EN 14598-2 - REINFORCED THERMOSETTING MOULDING COMPOUNDS - SPECIFICATION FOR SHEET MOULDING COMPOUND (SMC) AND BULK MOULDING COMPOUND (BMC) - PART 2: METHODS OF TEST AND GENERAL REQUIREMENTS |
| BS EN 562:2003 | Gas welding equipment. Pressure gauges used in welding, cutting and allied processes |
| EN 62329-2:2006 | Heat shrinkable moulded shapes - Part 2: Methods of test |
| CEN/TS 45545-2:2009 | Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components |
| CEN/TS 15534-2:2007 | Wood-plastics composites (WPC) - Part 2: Characterisation of WPC materials |
| ISO 3582:2000 | Flexible cellular polymeric materials — Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame |
| ISO 293:2004 | Plastics — Compression moulding of test specimens of thermoplastic materials |
| ISO 3167:2014 | Plastics Multipurpose test specimens |
| ISO 295:2004 | Plastics — Compression moulding of test specimens of thermosetting materials |
| ISO 294:1995 | Plastics Injection moulding of test specimens of thermoplastic materials |
| ISO 13943:2017 | Fire safety — Vocabulary |
| ISO 2859-2:1985 | Sampling procedures for inspection by attributes — Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection |
| ISO 7823-1:2003 | Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| ISO 5725:1986 | Precision of test methods Determination of repeatability and reproducibility for a standard test method by inter-laboratory tests |
| ISO 2818:1994 | Plastics — Preparation of test specimens by machining |
| ISO 4589-1:2017 | Plastics — Determination of burning behaviour by oxygen index — Part 1: General requirements |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.