• There are no items in your cart

EN ISO 4628-2:2016

Current
Current

The latest, up-to-date edition.

Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016)
Published date

02-10-2016

European foreword
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Assessment
5 Expression of results
6 Test report
Annex A (normative) - Calibration images
Annex B (informative) - Correlation between ISO 4628-2 and
        ASTM D 714 rating systems
Bibliography

ISO 4628-2:2016 specifies a method for assessing the degree of blistering of coatings by comparison with pictorial standards.The pictorial standards provided in this part of ISO 4628 illustrate blisters in the sizes 2, 3, 4, and 5, and each size in the quantities (densities) 2, 3, 4, and 5.ISO 4628‑1 defines the system used for designating the quantity and size of defects and the intensity of changes in appearance of coatings and outlines the general principles of the system. This system is intended to be used, in particular, for defects caused by ageing and weathering, and for uniform changes such as colour changes, for example yellowing.

Committee
CEN/TC 139
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

17/30371343 DC : 0 BS EN 4688 - AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING EPOXY PRIMER - HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION
15/30329698 DC : 0 BS EN 13523-27 - COIL COATED METALS - TEST METHODS - PART 27: RESISTANCE TO HUMID POULTICE (CATAPLASM TEST)
PREN 1504-2 : DRAFT 2015 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE
BS EN 1504-10:2017 Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Site application of products and systems and quality control of the works
13/30277107 DC : 0 BS EN 14389-2 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS
17/30371344 DC : 0 BS EN 4689 - AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION
12/30268970 DC : 0 BS EN 13523-25 - COIL COATED METALS - TEST METHODS - PART 25: RESISTANCE TO HUMIDITY
BS EN 3021:2017 Aerospace series. Molybdenum disulphide dry film lubricants graphite and halogen free. Technical specification
BS EN 4687:2012 Aerospace series. Paints and varnishes. Chromate free non corrosion inhibiting two components cold curing primer for military application
DIN EN 16927 E : 2017 MINI POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI POOLS
PREN 4689 : 200P1 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION
PREN 3021 : DRAFT 2015 AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE AND HALOGEN FREE - TECHNICAL SPECIFICATION
I.S. EN 16927:2017 MINI-POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI-POOLS
I.S. EN 10169:2010 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS
I.S. EN 13523-27:2017 COIL COATED METALS - TEST METHODS - PART 27: RESISTANCE TO HUMID POULTICE (CATAPLASM TEST)
17/30356734 DC : 0 BS EN 14236 - ULTRASONIC DOMESTIC GAS METERS
I.S. EN 927-3:2012 PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST
DIN EN 1670:2007-06 Building hardware - Corrosion resistance - Requirements and test methods
DIN EN 13500:2003-12 THERMAL INSULATION PRODUCTS FOR BUILDINGS - EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS (ETICS) BASED ON MINERAL WOOL - SPECIFICATION
DIN EN 13499:2003-12 Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on expanded polystyrene - Specification; German version EN 13499:2003
DIN EN 1504-2:2015-03 (Draft) PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE
DIN EN 1396:2015-06 Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
BS EN 13523-8:2017 Coil coated metals. Test methods Resistance to salt spray (fog)
UNE-EN 13523-25:2014 Coil coated metals - Test methods - Part 25: Resistance to humidity
BS EN 15081:2007 Industrial valves. Mounting kits for part-turn valve actuator attachment
UNI EN 4689 : 2013 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION
CEN/TR 581-4:2005 OUTDOOR FURNITURE - SEATING AND TABLES FOR CAMPING, DOMESTIC AND CONTRACT USE - PART 4: REQUIREMENTS AND TEST METHODS FOR DURABILITY UNDER THE INFLUENCE OF CLIMATIC CONDITIONS
CEN/TS 12983-2:2005 Cookware - Domestic cookware for use on top of a stove, cooker or hob - Part 2: Further general requirements and specific requirements for ceramic, glass and glass ceramic cookware
EN 13523-26:2014 Coil coated metals - Test methods - Part 26: Resistance to condensation of water
EN 13523-9:2014 Coil coated metals - Test methods - Part 9: Resistance to water immersion
EN 10169:2010+A1:2012 Continuously organic coated (coil coated) steel flat products - Technical delivery conditions
EN 13523-8:2017 Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog)
ONORM CEN/TS 12983-2 : 2005 COOKWARE - DOMESTIC COOKWARE FOR USE ON TOP OF A STOVE, COOKER OR HOB - PART 2: FURTHER GENERAL REQUIREMENTS AND SPECIFIC REQUIREMENTS FOR CERAMIC, GLASS AND GLASS CERAMIC COOKWARE
BS EN 15714-1:2009 Industrial valves. Actuators Terminology and definitions
PREN 13523-21 : DRAFT 2016 COIL COATED METALS - TEST METHODS - PART 21: EVALUATION OF OUTDOOR EXPOSED PANELS
17/30371341 DC : 0 PREN 4687 - AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE (NON CORROSION INHIBITING) TWO COMPONENT COLD CURING PRIMER - CHROMATE FREE PRIMER FOR MILITARY APPLICATION
13/30277104 DC : 0 BS EN 14389-1 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS
15/30328805 DC : 0 BS EN 16927 - MINI POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI POOLS
PREN 16951-2 : DRAFT 2016 RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS
BS EN 4689:2012 Aerospace series. Paints and varnishes. Two components cold curing polyurethane finish. High flexibility and chemical agent resistance for military application
UNE-EN 13523-27:2017 Coil coated metals - Test methods - Part 27: Resistance to humid poultice (Cataplasm test)
13/30286946 DC : 0 BS EN 1396 - ALUMINIUM AND ALUMINIUM ALLOYS - COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS - SPECIFICATIONS
PREN 13523-8 : DRAFT 2016 COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG)
PREN 14389-2 : DRAFT 2013 ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS
16/30336501 DC : 0 BS EN 16951-2 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS
I.S. EN 15714-1:2009 INDUSTRIAL VALVES - ACTUATORS - PART 1: TERMINOLOGY AND DEFINITIONS
I.S. EN 927-6:2006 PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 6: EXPOSURE OF WOOD COATINGS TO ARTIFICIAL WEATHERING USING FLUORESCENT UV LAMPS AND WATER
I.S. EN 4687:2012 AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION
BS EN 10169 : 2010 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS
BS EN 927-6:2006 Paints and varnishes. Coating materials and coating systems for exterior wood Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water
ONORM EN 927-6 : 2006 PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 6: EXPOSURE OF WOOD COATINGS TO ARTIFICIAL WEATHERING USING FLUORESCENT UV LAMPS AND WATER
EN 14236:2007 Ultrasonic domestic gas meters
DIN EN 1359:2007-06 GAS METERS - DIAPHRAGM GAS METERS
DIN EN 13523-26:2014-08 Coil coated metals - Test methods - Part 26: Resistance to condensation of water
DIN EN 927-3:2012-10 PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST
DIN EN 14236:2008-06 ULTRASONIC DOMESTIC GAS METERS
BS EN 14389-1:2015 Road traffic noise reducing devices. Procedures for assessing long term performance Acoustical characteristics
I.S. EN 14389-2:2015 ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS
UNI EN 4688 : 2013 AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION
I.S. EN 13523-25:2014 COIL COATED METALS - TEST METHODS - PART 25: RESISTANCE TO HUMIDITY
I.S. EN 13523-21:2017 COIL COATED METALS - TEST METHODS - PART 21: EVALUATION OF OUTDOOR EXPOSED PANELS
I.S. EN 13523-8:2017 COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG)
I.S. EN 1396:2015 ALUMINIUM AND ALUMINIUM ALLOYS - COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS - SPECIFICATIONS
UNI EN 4687 : 2013 AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION
EN 4689:2012 Aerospace series - Paints and varnishes - Two components cold curing polyurethane finish - High flexibility and chemical agent resistance for military application
I.S. EN 1359:2017 GAS METERS - DIAPHRAGM GAS METERS
EN 4687:2012 Aerospace series - Paints and varnishes - Chromate free non corrosion inhibiting two components cold curing primer for military application
I.S. EN 1670:2007 BUILDING HARDWARE - CORROSION RESISTANCE - REQUIREMENTS AND TEST METHODS
I.S. EN 13523-26:2014 COIL COATED METALS - TEST METHODS - PART 26: RESISTANCE TO CONDENSATION OF WATER
EN 4688:2012 Aerospace series - Paints and varnishes - Corrosion inhibiting two components cold curing primer for military application
I.S. EN 13523-9:2014 COIL COATED METALS - TEST METHODS - PART 9: RESISTANCE TO WATER IMMERSION
I.S. EN 14389-1:2015 ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS
VDI 3822 Blatt 2.1.8:2012-01 Failure analysis - Defects of thermoplastic products made of plastics caused by weather-induced stress
VDI 2083 Blatt 18:2012-01 Cleanroom technology - Biocontamination control
VDI 2083 Blatt 17:2013-06 Cleanroom technology - Compatibility of materials with the required cleanliness
VDI 2083 Blatt 9.2:2017-01 Cleanroom technology - Consumables in the cleanroom
DIN EN 16927:2017-05 MINI POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI POOLS
16/30340560 DC : 0 BS EN 13523-8 - COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG)
PREN 14389-1 : DRAFT 2013 ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS
I.S. CEN TS 12983-2:2005 COOKWARE - DOMESTIC COOKWARE FOR USE ON TOP OF A STOVE, COOKER OR HOB - PART 2: FURTHER GENERAL REQUIREMENTS AND SPECIFIC REQUIREMENTS FOR CERAMIC, GLASS AND GLASS CERAMIC COOKWARE
PREN 1504-10 : DRAFT 2015 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS
12/30268964 DC : 0 BS EN 13523-9 - COIL COATED METALS - TEST METHODS - PART 9: RESISTANCE TO WATER IMMERSION
15/30327977 DC : 0 BS EN 1504-10 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS
DIN EN 13523-21:2016-07 (Draft) COIL COATED METALS - TEST METHODS - PART 21: EVALUATION OF OUTDOOR EXPOSED PANELS
DIN EN 16582-1 E : 2015 DOMESTIC SWIMMING POOLS - PART 1: GENERAL REQUIREMENTS INCLUDING SAFETY AND TEST METHODS
07/30165574 DC : DRAFT DEC 2007 BS EN 13523-27 - COIL COATED METALS - TEST METHODS - PART 27: RESISTANCE TO HUMID POULTRICE (CATAPLASM TEST)
04/30124417 DC : DRAFT OCT 2004 EN 15081 - INDUSTRIAL VALVES - MOUNTING KITS FOR PART-TURN VALVE ACTUATOR ATTACHMENT
DIN EN 13523-27:2015-12 (Draft) COIL COATED METALS - TEST METHODS - PART 27: RESISTANCE TO HUMID POULTICE (CATAPLASM TEST)
16/30345769 DC : 0 BS EN 927-6 - PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 6: EXPOSURE OF WOOD COATINGS TO ARTIFICIAL WEATHERING USING FLUORESCENT UV LAMPS AND WATER
17/30358108 DC : 0 BS EN 17125 - DOMESTIC SPAS AND HOT TUBS - SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN 4689:2012 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION
DIN EN 10169:2012-06 Continuously organic coated (coil coated) steel flat products - Technical delivery conditions (includes Amendment A1:2012)
I.S. EN 14236:2007 ULTRASONIC DOMESTIC GAS METERS
I.S. EN 16582-1:2015 DOMESTIC SWIMMING POOLS - PART 1: GENERAL REQUIREMENTS INCLUDING SAFETY AND TEST METHODS
BS EN 13523-27:2017 Coil coated metals. Test methods Resistance to humid poultice (Cataplasm test)
PREN 17125 : DRAFT 2017 DOMESTIC SPAS AND HOT TUBS - SAFETY REQUIREMENTS AND TEST METHODS
UNE-EN 16582-1:2015 Domestic swimming pools - Part 1: General requirements including safety and test methods
EN 927-6:2006 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water
DIN EN 15081 E : 2008 INDUSTRIAL VALVES - MOUNTING KITS FOR PART-TURN VALVE ACTUATOR ATTACHMENT
BS EN 1396:2007 Aluminium and aluminium alloys. Coil coated sheet and strip for general applications. Specifications
BS EN 1504-2:2004 Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Surface protection systems for concrete
DIN EN 1504-2:2005-01 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete; German version EN 1504-2:2004
UNE-EN 927-3:2013 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test
UNI EN 1504-10 : 2005 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS - REQUIREMENTS - QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS
UNI EN 1670 : 2007 BUILDING HARDWARE - CORROSION RESISTANCE - REQUIREMENTS AND TEST METHODS
PREN 927-6 : DRAFT 2016 PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 6: EXPOSURE OF WOOD COATINGS TO ARTIFICIAL WEATHERING USING FLUORESCENT UV LAMPS AND WATER
PREN 14236 : DRAFT 2017 ULTRASONIC DOMESTIC GAS METERS
13/30279620 DC : 0 BS EN 16582-1 - DOMESTIC SWIMMING POOLS - PART 1: GENERAL REQUIREMENTS INCLUDING SAFETY AND TEST METHODS
BS EN 16582-1:2015 Domestic swimming pools General requirements including safety and test methods
UNE-EN 14389-1:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics
PREN 4688 : 200P1 AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION
PREN 4687 : 200P1 AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION
I.S. EN 4688:2012 AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION
UNI EN 4160 : 2012 AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF THE EFFECT OF THERMAL EXPOSURE
PREN 13523-9 : DRAFT 2012 COIL COATED METALS - TEST METHODS - PART 9: RESISTANCE TO WATER IMMERSION
DIN EN 14236 E : 2008 ULTRASONIC DOMESTIC GAS METERS
15/30316975 DC : 0 BS EN 1504-2 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE
ONORM EN 14236 : 2008 ULTRASONIC DOMESTIC GAS METERS
EN 1504-10:2017 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works
UNI EN 927-3 : 2012 PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST
I.S. CEN TR 581-4:2006 OUTDOOR FURNITURE - SEATING AND TABLES FOR CAMPING, DOMESTIC AND CONTRACT USE - PART 4: REQUIREMENTS AND TEST METHODS FOR DURABILITY UNDER THE INFLUENCE OF CLIMATIC CONDITIONS
DIN EN 13523-25:2014-08 Coil coated metals - Test methods - Part 25: Resistance to humidity
DIN EN 13523-9:2014-08 Coil coated metals - Test methods - Part 9: Resistance to water immersion
UNE-EN 1396:2015 Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
UNE-EN 1504-2:2005 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete
BS EN 14236:2007 Ultrasonic domestic gas meters
BS EN 927-3:2012 Paints and varnishes. Coating materials and coating systems for exterior wood Natural weathering test
BS EN 14389-2:2015 Road traffic noise reducing devices. Procedures for assessing long term performance Non-acoustical characteristics
UNE-EN 14389-2:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics
BS EN 13523-25:2014 Coil coated metals. Test methods Resistance to humidity
UNE-EN 13523-9:2014 Coil coated metals - Test methods - Part 9: Resistance to water immersion
BS EN 13523-21:2017 Coil coated metals. Test methods Evaluation of outdoor exposed panels
UNE-EN 13523-21:2017 Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels
BS EN 1670:2007 Building hardware. Corrosion resistance. Requirements and test methods
BS EN 13523-26:2014 Coil coated metals. Test methods Resistance to condensation of water
UNE-EN 10169:2011 Continuously organic coated (coil coated) steel flat products - Technical delivery conditions
UNE-EN 13523-8:2017 Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog)
DIN EN 13523-27:2009-10 COIL COATED METALS - TEST METHODS - PART 27: RESISTANCE TO HUMID POULTICE (CATAPLASM TEST)
EN 1670:2007/AC:2008 BUILDING HARDWARE - CORROSION RESISTANCE - REQUIREMENTS AND TEST METHODS
UNI EN 13523-26 : 2014 COIL COATED METALS - TEST METHODS - PART 26: RESISTANCE TO CONDENSATION OF WATER
EN 927-3:2012 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test
EN 15081:2007 Industrial valves - Mounting kits for part-turn valve actuator attachment
EN 1396:2015 Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
EN 14389-2:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics
UNI EN 13523-9 : 2014 COIL COATED METALS - TEST METHODS - PART 9: RESISTANCE TO WATER IMMERSION
UNI EN 13523-25 : 2014 COIL COATED METALS - TEST METHODS - PART 25: RESISTANCE TO HUMIDITY
EN 1359:2017 Gas meters - Diaphragm gas meters
EN 14389-1:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics
EN 4160:2011 Aerospace series - Paints and varnishes - Determination of the effect of thermal exposure
EN 15714-1:2009 Industrial valves - Actuators - Part 1: Terminology and definitions
EN 16927:2017 Mini-pools - Specific requirements including safety and test methods for mini-pools
EN 1504-2:2004 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete
EN 1825-1:2004/AC:2006 GREASE SEPARATORS - PART 1: PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL
EN 3021:2017 Aerospace series - Molybdenum disulphide dry film lubricants graphite and halogen free - Technical specification
EN 13523-21:2017 Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels
UNE-EN 15714-1:2010 Industrial valves - Actuators - Part 1: Terminology and definitions
DIN EN 13523-8:2016-07 (Draft) COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG)
12/30268979 DC : 0 BS EN 13523-26 - COIL COATED METALS - TEST METHODS - PART 26: RESISTANCE TO CONDENSATION OF WATER
11/30237910 DC : 0 BS EN 927-3 - PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST
BS EN 4160:2011 Aerospace series. Paints and varnishes. Determination of the effect of thermal exposure
08/30188146 DC : 0 BS EN 10169 - CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS
EN 16582-1:2015 Domestic swimming pools - Part 1: General requirements including safety and test methods
BS EN 4688:2012 Aerospace series. Paints and varnishes. Corrosion inhibiting two components cold curing primer for military application
16/30340557 DC : 0 BS EN 13523-21 - COIL COATED METALS - TEST METHODS - PART 21: EVALUATION OF OUTDOOR EXPOSED PANELS
BS EN 16927:2017 Mini-pools. Specific requirements including safety and test methods for mini-pools
DD CEN/TS 12983-2:2005 Cookware. Domestic cookware for use on top of a stove, cooker or hob Further general requirements and specific requirements for ceramic, glass and glass ceramic cookware
DIN EN 15714-1:2010-02 Industrial valves - Actuators - Part 1: Terminology and definitions
DIN EN 16582-1:2015-11 Domestic swimming pools - Part 1: General requirements including safety and test methods
PREN 1396 : DRAFT 2013 ALUMINIUM AND ALUMINIUM ALLOYS - COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS - SPECIFICATIONS
I.S. EN 4160:2011 AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF THE EFFECT OF THERMAL EXPOSURE
15/30326160 DC : 0 BS EN 16951-1 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTIC CHARACTERISTICS
I.S. EN 3021:2017 AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE AND HALOGEN FREE - TECHNICAL SPECIFICATION
PREN 927-3 : DRAFT 2011 PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST
UNI EN 10169 : 2012 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS
UNI EN 15714-1 : 2009 INDUSTRIAL VALVES - ACTUATORS - PART 1: TERMINOLOGY AND DEFINITIONS
UNE-EN 16927:2017 Mini-pools - Specific requirements including safety and test methods for mini-pools
PREN 13523-27 : DRAFT 2015 COIL COATED METALS - TEST METHODS - PART 27: RESISTANCE TO HUMID POULTICE (CATAPLASM TEST)
DIN EN 16927:2015-10 (Draft) MINI POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI POOLS
I.S. EN 1504-10:2017 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS
BS EN 13523-9:2014 Coil coated metals. Test methods Resistance to water immersion
BS EN 1825-1:2004 Grease separators Principles of design, performance and testing, marking and quality control
BS EN 1359:2017 Gas meters. Diaphragm gas meters
EN 13523-27:2017 Coil coated metals - Test methods - Part 27: Resistance to humid poultice (Cataplasm test)
EN 13523-25:2014 Coil coated metals - Test methods - Part 25: Resistance to humidity
DIN EN 15081:2008-03 Industrial valves - Mounting kits for part-turn valve actuator attachment
DIN EN 1825-1:2004-12 Grease separators - Part 1: Principles of design, performance and testing, marking and quality control; German version EN 1825-1:2004

ISO 13076:2012 Paints and varnishes Lighting and procedure for visual assessments of coatings
ISO 4628-1:2016 Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 1: General introduction and designation system

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.