• There are no items in your cart

EN ISO 6946:2017

Current
Current

The latest, up-to-date edition.

Building components and building elements - Thermal resistance and thermal transmittance - Calculation methods (ISO 6946:2017, Corrected version 2021-12)
Published date

07-19-2017

ISO 6946:2017 provides the method of calculation of the thermal resistance and thermal transmittance of building components and building elements, excluding doors, windows and other glazed units, curtain walling, components which involve heat transfer to the ground, and components through which air is designed to permeate.The calculation method is based on the appropriate design thermal conductivities or design thermal resistances of the materials and products for the application concerned.The method applies to components and elements consisting of thermally homogeneous layers (which can include air layers).ISO 6946:2017 also provides an approximate method that can be used for elements containing inhomogeneous layers, including the effect of metal fasteners, by means of a correction term given in Annex F. Other cases where insulation is bridged by metal are outside the scope of ISO 6946:2017.NOTE Table 1 in the Introduction shows the relative position of ISO 6946:2017 within the set of EPB standards in the context of the modular structure as set out in ISO 52000‑1.

Committee
CEN/TC 89
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

DIN EN 15191 E : 2010 PRECAST CONCRETE PRODUCTS - CLASSIFICATION OF GLASSFIBRE REINFORCED CONCRETE PERFORMANCE
PREN ISO 13791 : DRAFT 2010 THERMAL PERFORMANCE OF BUILDINGS - CALCULATION OF INTERNAL TEMPERATURES OF A ROOM IN SUMMER WITHOUT MECHANICAL COOLING - GENERAL CRITERIA AND VALIDATION PROCEDURES
00/108216 DC : DRAFT NOV 2000 PREN 14063-2 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED PRODUCTS
15/30325699 DC : 0 BS EN ISO 52000-1 - ENERGY PERFORMANCE OF BUILDINGS - OVERARCHING EPB ASSESSMENT - PART 1: GENERAL FRAMEWORK AND PROCEDURES
BS EN 14509:2013 Self-supporting double skin metal faced insulating panels. Factory made products. Specifications
I.S. EN ISO 13792:2012 THERMAL PERFORMANCE OF BUILDINGS - CALCULATION OF INTERNAL TEMPERATURES OF A ROOM IN SUMMER WITHOUT MECHANICAL COOLING - SIMPLIFIED METHODS (ISO 13792:2012)
15/30328765 DC : 0 BS EN 12602 - PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE
DIN EN 16855-1:2015-06 (Draft) WALK-IN COLD ROOMS - DEFINITION, THERMAL INSULATION PERFORMANCE AND TEST METHODS - PART 1: PREFABRICATED COLD ROOM KITS
BS EN 14316-2:2007 Thermal insulation products for buildings. In-situ thermal insulation formed from expanded perlite (EP) products Specification for the installed products
DIN EN 16855-1 E : 2017 WALK-IN COLD ROOMS - DEFINITION, THERMAL INSULATION PERFORMANCE AND TEST METHODS - PART 1: PREFABRICATED COLD ROOM KITS
10/30236365 DC : 0 BS EN 12428 - INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - THERMAL TRANSMITTANCE - REQUIREMENTS FOR CLASSIFICATION
I.S. EN ISO 13791:2012 THERMAL PERFORMANCE OF BUILDINGS - CALCULATION OF INTERNAL TEMPERATURES OF A ROOM IN SUMMER WITHOUT MECHANICAL COOLING - GENERAL CRITERIA AND VALIDATION PROCEDURES (ISO 13791:2012)
11/30251988 DC : 0 BS EN 14190 - GYPSUM PLASTERBOARD PRODUCTS FROM PROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNE-EN 16809-2:2017 Thermal insulation products of buildings - In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 2: Specification for the bonded and loose-fill products after installation
08/30171552 DC : DRAFT JAN 2008 BS EN 13279-1 - GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS
DIN EN 14320-2:2013-04 Thermal insulating products for building equipment and industrial installations - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 2: Specification for the installed insulation products
DIN EN 14509:2013-12 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
10/30202119 DC : 0 BS EN ISO 13792 - THERMAL PERFORMANCE OF BUILDINGS - CALCULATION OF INTERNAL TEMPERATURES OF A ROOM IN SUMMER WITHOUT MECHANICAL COOLING - SIMPLIFIED METHODS
07/30166420 DC : DRAFT AUG 2007 BS EN 1520 - PREFABRICATED REINFORCED COMPONENTS OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE
BS EN 16286-1:2013 Railway applications. Gangway systems between vehicles Main applications
10/30228898 DC : 0 BS EN 1745 - MASONRY AND MASONRY PRODUCTS - METHODS FOR DETERMINING THERMAL PROPERTIES
PREN 16855 : DRAFT 2015 WALK-IN COLD ROOMS - DEFINITION, THERMAL INSULATION PERFORMANCE AND TEST METHODS - PART 1: PREFABRICATED COLD ROOM KITS
BS EN 16809-2:2017 Thermal insulation products of buildings. In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads Specification for the bonded and loose-fill products after installation
PD CEN/TR 12831-2:2017 Energy performance of buildings. Method for calculation of the design heat load Explanation and justification of EN 12831-1, Module M3-3
99/102907 DC : DRAFT MAR 1999 PREN 13500 - THERMAL INSULATION PRODUCTS FOR BUILDING APPLICATIONS - EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS (ETICS) BASED ON MINERAL WOOL - SPECIFICATION
02/101684 DC : DRAFT FEB 2002 PREN 14316-1 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION
UNI EN 16240 : 2014 LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
UNE-EN 15191:2011 Precast concrete products - Classification of glassfibre reinforced concrete performance
I.S. EN 13369:2013 COMMON RULES FOR PRECAST CONCRETE PRODUCTS
I.S. EN 15037-4:2010 PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 4: EXPANDED POLYSTYRENE BLOCKS
I.S. EN 16012:2012 THERMAL INSULATION FOR BUILDINGS - REFLECTIVE INSULATION PRODUCTS - DETERMINATION OF THE DECLARED THERMAL PERFORMANCE
BS EN 16153 : 2013 LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
UNE-EN 14315-2:2013 Thermal insulating products for buildings - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 2: Specification for the installed insulation products
PREN 12602 : DRAFT 2015 PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE
UNI EN 15037-4 : 2013 PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 4: EXPANDED POLYSTYRENE BLOCKS
UNI EN 14320-2 : 2013 THERMAL INSULATING PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU FORMED SPRAYED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED INSULATION PRODUCTS
I.S. EN 16809-2:2017 THERMAL INSULATION PRODUCTS OF BUILDINGS - IN-SITU FORMED PRODUCTS FROM LOOSE-FILL EXPANDED POLYSTYRENE (EPS) BEADS AND BONDED EXPANDED POLYSTYRENE BEADS - PART 2: SPECIFICATION FOR THE BONDED AND LOOSE-FILL PRODUCTS AFTER INSTALLATION
I.S. EN 16286-1:2013 RAILWAY APPLICATIONS - GANGWAY SYSTEMS BETWEEN VEHICLES - PART 1: MAIN APPLICATIONS
UNE-EN 14063-2:2015 Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 2: Specification for the installed products
UNI EN 1457-1 : 2012 CHIMNEYS - CLAY/CERAMIC FLUE LINERS - PART 1: FLUE LINERS OPERATING UNDER DRY CONDITIONS - REQUIREMENTS AND TEST METHODS
I.S. EN 14963:2006 ROOF COVERINGS - CONTINUOUS ROOFLIGHTS OF PLASTICS WITH OR WITHOUT UPSTANDS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS
DIN EN 13500:2003-12 THERMAL INSULATION PRODUCTS FOR BUILDINGS - EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS (ETICS) BASED ON MINERAL WOOL - SPECIFICATION
DIN EN 13499:2003-12 Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on expanded polystyrene - Specification; German version EN 13499:2003
BS EN 13499:2003 Thermal insulation products for buildings. External thermal insulation composite systems (ETICS) based on expanded polystyrene. Specification
BS EN 14190:2014 Gypsum board products from reprocessing. Definitions, requirements and test methods
BS EN 673:2011 Glass in building. Determination of thermal transmittance (U value). Calculation method
BS EN 1873 : 2014 PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS - PRODUCT SPECIFICATION AND TEST METHODS
BS EN ISO 10211-1:1996 Thermal bridges in building construction. Heat flows and surface temperatures General calculation methods
BS EN 1934:1998 Thermal performance of buildings. Determination of thermal resistance by hot box method using heat flow meter. Masonry
BS EN 12831:2003 Heating systems in buildings. Method for calculation of the design heat load
EN 13500:2003 Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on mineral wool - Specification
DIN EN 15603:2008-07 ENERGY PERFORMANCE OF BUILDINGS - OVERALL ENERGY USE AND DEFINITION OF ENERGY RATINGS
DIN EN 13815:2006-12 Fibrous gypsum plaster casts - Definitions, requirements and test methods
EN 12860:2001/AC:2002 GYPSUM BASED ADHESIVES FOR GYPSUM BLOCKS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
EN 12831 : 2003 HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD
EN 13499:2003 Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on expanded polystyrene - Specification
EN 12831-1:2017 Energy performance of buildings - Method for calculation of the design heat load - Part 1: Space heating load, Module M3-3
EN 12602:2016 Prefabricated reinforced components of autoclaved aerated concrete
EN 12859:2011 Gypsum blocks - Definitions, requirements and test methods
EN 50583-2:2016 Photovoltaics in buildings - Part 2: BIPV systems
DIN EN 16809-2:2017-04 THERMAL INSULATION PRODUCTS OF BUILDINGS - IN-SITU FORMED PRODUCTS FROM LOOSE-FILL EXPANDED POLYSTYRENE (EPS) BEADS AND BONDED EXPANDED POLYSTYRENE BEADS - PART 2: SPECIFICATION FOR THE BONDED AND LOOSE-FILL PRODUCTS AFTER INSTALLATION
09/30198700 DC : 0 BS EN 15037-4 - PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 4: EXPANDED POLYSTYRENE BLOCKS
DIN EN 15191:2010-04 Precast concrete products - Classification of glassfibre reinforced concrete performance
BS EN 14320-2:2013 Thermal insulating products for building equipment and industrial installations. In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products Specification for the installed insulation products
13/30266550 DC : 0 BS EN 14509 - SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
10/30218654 DC : 0 BS EN 12859 - GYPSUM BLOCKS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
BS EN 14318-2:2013 Thermal insulating products for buildings. In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products Specification for the installed insulation products
DIN EN 16012:2015-05 Thermal insulation for buildings - Reflective insulation products - Determination of the declared thermal performance (includes Amendment A1:2015)
UNE-EN 1457-2:2013 Chimneys - Clay/ceramic flue liners - Part 2: Flue liners operating under wet conditions - Requirements and test methods
00/101411 DC : DRAFT FEB 2000 BS EN 13815 - FIBROUS GYPSUM PLASTER PRODUCTS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
BS EN 15191:2009 Precast concrete products. Classification of glassfibre reinforced concrete performance
08/30178840 DC : DRAFT AUG 2008 BS EN 15037-3 - PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 3: CLAY BLOCKS
BS EN 50583-2:2016 Photovoltaics in buildings BIPV systems
DIN EN 14317-2:2007-04 Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 2: Specification for the installed products
12/30256053 DC : 0 BS EN 16383 - THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF THE HYGROTHERMAL BEHAVIOUR OF EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS WITH RENDERS (ETICS)
12/30237838 DC : 0 BS ISO 16343 - ENERGY PERFORMANCE OF BUILDINGS - METHODS FOR EXPRESSING ENERGY PERFORMANCE AND FOR ENERGY CERTIFICATION OF BUILDINGS
DIN EN 14064-2:2010-06 Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 2: Specification for the installed products
02/105004 DC : DRAFT JULY 2002 PREN 14509 - SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING SANDWICH PANELS - FACTORY MADE PRODUCTS - SPECIFICATION
DIN EN 12602:2015-12 (Draft) PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE
CEN/TR 12831-2:2017 Energy performance of buildings - Method for calculation of the design heat load - Part 2: Explanation and justification of EN 12831-1, Module M3-3
10/30218985 DC : DRAFT JUNE 2010 BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS
BS EN 14315-2:2013 Thermal insulating products for buildings. In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products Specification for the installed insulation products
I.S. EN 14319-2:2013 THERMAL INSULATING PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU FORMED DISPENSED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED INSULATION PRODUCTS
15/30301583 DC : 0 BS EN 16863 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE REFLECTIVE INSULATION PRODUCTS (RI) - SPECIFICATION
BS EN 12602:2016 Prefabricated reinforced components of autoclaved aerated concrete
S.R. CEN/TR 12831-2:2017 ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD - PART 2: EXPLANATION AND JUSTIFICATION OF EN 12831-1, MODULE M3-3
UNI EN 15037-3 : 2011 PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 3: CLAY BLOCKS
I.S. EN 14064-2:2010 THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSEFILL MINERAL WOOL (MW) PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED PRODUCTS
BS EN 15037-3 : 2009 PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 3: CLAY BLOCKS
UNI EN 16286-1 : 2013 RAILWAY APPLICATIONS - GANGWAY SYSTEMS BETWEEN VEHICLES - PART 1: MAIN APPLICATIONS
I.S. EN 12831-1:2017 ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD - PART 1: SPACE HEATING LOAD, MODULE M3-3
UNI EN 15603 : 2008 ENERGY PERFORMANCE OF BUILDINGS - OVERALL ENERGY USE AND DEFINITION OF ENERGY RATINGS
BS EN 13369:2013 Common rules for precast concrete products
I.S. EN 14315-2:2013 THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED SPRAYED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED INSULATION PRODUCTS
I.S. EN 1457-2:2012 CHIMNEYS - CLAY/CERAMIC FLUE LINERS - PART 2: FLUE LINERS OPERATING UNDER WET CONDITIONS - REQUIREMENTS AND TEST METHODS
I.S. EN 16855-1:2017 WALK-IN COLD ROOMS - DEFINITION, THERMAL INSULATION PERFORMANCE AND TEST METHODS - PART 1: PREFABRICATED COLD ROOM KITS
UNE-EN 16025-2:2016 Thermal and/ or sound insulating products in building construction - Bound EPS ballastings - Part 2: Processing of the factory premixed EPS dry plaster
UNI EN 14064-2 : 2010 THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE-FILL MINERAL WOOL (MW) PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED PRODUCTS
UNE-EN 16012:2013 Thermal insulation for buildings - Reflective insulation products - Determination of the declared thermal performance
DIN EN 13279-1:2008-11 GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS
DIN EN 1520:2011-06 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
DIN EN 1745:2012-07 MASONRY AND MASONRY PRODUCTS - METHODS FOR DETERMINING THERMAL PROPERTIES
DIN EN 15255:2007-11 ENERGY PERFORMANCE OF BUILDINGS - SENSIBLE ROOM COOLING LOAD CALCULATION - GENERAL CRITERIA AND VALIDATION PROCEDURES
DIN EN 15255 E : 2007 ENERGY PERFORMANCE OF BUILDINGS - SENSIBLE ROOM COOLING LOAD CALCULATION - GENERAL CRITERIA AND VALIDATION PROCEDURES
DIN EN 14246:2006-09 Gypsum elements for suspended ceilings - Definitions, requirements and test methods
DIN EN 15318:2008-01 Design and application of gypsum blocks
BS EN ISO 13792:2012 Thermal performance of buildings. Calculation of internal temperatures of a room in summer without mechanical cooling. Simplified methods
UNE-EN 1745:2013 Masonry and masonry products - Methods for determining thermal properties
I.S. EN 12428:2013 INDUSTRIAL, COMMERCIAL AND GARAGE DOORS - THERMAL TRANSMITTANCE - REQUIREMENTS FOR THE CALCULATION
I.S. EN 673:2011 GLASS IN BUILDING - DETERMINATION OF THERMAL TRANSMITTANCE (U VALUE) - CALCULATION METHOD
I.S. EN 1806:2006 CHIMNEYS - CLAY/CERAMIC FLUE BLOCKS FOR SINGLE WALL CHIMNEYS - REQUIREMENTS AND TEST METHODS
I.S. EN 1520:2011 PREFABRICATED REINFORCED COMPONENTS OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE WITH STRUCTURAL OR NON-STRUCTURAL REINFORCEMENT
DIN EN 12602:2016-12 Prefabricated reinforced components of autoclaved aerated concrete
I.S. EN 1873:2014 PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS - PRODUCT SPECIFICATION AND TEST METHODS
I.S. EN 13964:2014 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
I.S. EN 12859:2011 GYPSUM BLOCKS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 1873:2016-07 PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS - PRODUCT SPECIFICATION AND TEST METHODS
I.S. EN 14190:2014 GYPSUM BOARD PRODUCTS FROM REPROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS
VDI 2262 Blatt 3:2011-06 Workplace air - Reduction of exposure to air pollutants - Ventilation technical measures
DIN EN 16855-1:2017-05 WALK-IN COLD ROOMS - DEFINITION, THERMAL INSULATION PERFORMANCE AND TEST METHODS - PART 1: PREFABRICATED COLD ROOM KITS
VDI 6019 Blatt 2:2009-07 Engineering methods for the dimensioning of systems for the removal of smoke from buildings - Engineering methods
VDI 2078:2015-06 Calculation of thermal loads and room temperatures (design cooling load and annual simulation)
DIN EN 12831-1 E : 2017 ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD - PART 1: SPACE HEATING LOAD, MODULE M3-3
DIN EN 15037-4:2013-08 PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 4: EXPANDED POLYSTYRENE BLOCKS
BS EN 12831-1:2017 Energy performance of buildings. Method for calculation of the design heat load Space heating load, Module M3-3
14/30282881 DC : 0 BS EN 16809-2 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED PRODUCTS FROM LOOSE-FILL EXPANDED POLYSTYRENE (EPS) BEADS AND BONDED EXPANDED POLYSTYRENE BEADS - PART 2: SPECIFICATION FOR THE BONDED AND LOOSE-FILL PRODUCTS AFTER INSTALLATION
DIN EN 12428:2013-04 Industrial, commercial and garage doors - Thermal transmittance - Requirements for the calculation
10/30202116 DC : 0 BS EN ISO 13791 - THERMAL PERFORMANCE OF BUILDINGS - CALCULATION OF INTERNAL TEMPERATURES OF A ROOM IN SUMMER WITHOUT MECHANICAL COOLING - GENERAL CRITERIA AND VALIDATION PROCEDURES
05/30134362 DC : DRAFT MAY 2005 EN 15101-2 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE-FILL CELLULOSE PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED PRODUCTS
01/103304 DC : DRAFT APR 2001 PREN 14190 - GYPSUM PLASTERBOARD PRODUCTS FROM SECONDARY PROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS
15/30320130 DC : 0 BS EN 16855 - WALK-IN COLD ROOMS - DEFINITION, THERMAL INSULATION PERFORMANCE AND TEST METHODS - PART 1: PREFABRICATED COLD ROOM KITS
BS EN 16240:2013 Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings. Requirements and test methods
UNE-EN 1457-1:2013 Chimneys - Clay/ceramic flue liners - Part 1: Flue liners operating under dry conditions - Requirements and test methods
05/30134647 DC : DRAFT JUN 2005 EN 15255 - THERMAL PERFORMANCE OF BUILDINGS - SENSIBLE ROOM COOLING LOAD CALCULATION - GENERAL CRITERIA AND VALIDATION PROCEDURES
DIN EN 15498:2008-08 PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE
UNE-EN 50583-2:2016 Photovoltaics in buildings - Part 2: BIPV systems
PREN 12428 : DRAFT 2010 INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - THERMAL TRANSMITTANCE - REQUIREMENTS FOR CLASSIFICATION
DIN EN 16809-2 E : 2017 THERMAL INSULATION PRODUCTS OF BUILDINGS - IN-SITU FORMED PRODUCTS FROM LOOSE-FILL EXPANDED POLYSTYRENE (EPS) BEADS AND BONDED EXPANDED POLYSTYRENE BEADS - PART 2: SPECIFICATION FOR THE BONDED AND LOOSE-FILL PRODUCTS AFTER INSTALLATION
DIN EN 14963 E : 2006 ROOF COVERINGS - CONTINUOUS ROOFLIGHTS OF PLASTICS WITH OR WITHOUT UPSTANDS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS
12/30266506 DC : 0 BS EN 50583 - PHOTOVOLTAICS IN BUILDINGS
DIN EN 14063-2:2013-10 THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED PRODUCTS
01/105976 DC : DRAFT JULY 2001 PREN 14246 - GYPSUM ELEMENTS FOR SUSPENDED CEILINGS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
00/106948 DC : DRAFT OCT 2000 PREN 13947 - THERMAL PERFORMANCE OF CURTAIN WALLING - CALCULATION OF THERMAL TRANSMITTANCE
05/30138009 DC : DRAFT AUG 2005 EN 15319 - GENERAL PRINCIPLES OF DESIGN OF FIBROUS (GYPSUM) PLASTER WORKS
I.S. EN 1457-1:2012 CHIMNEYS - CLAY/CERAMIC FLUE LINERS - PART 1: FLUE LINERS OPERATING UNDER DRY CONDITIONS - REQUIREMENTS AND TEST METHODS
16/30338243 DC BS EN 1457-2. Chimneys. Clay/ceramic flue liners. Part 2. Flue liners operating under wet conditions. Requirements and test methods
DIN EN 14963:2006-12 Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods
11/30238648 DC : DRAFT FEB 2011 BS EN 16240 - LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
BS EN 15498:2008 Precast concrete products. Wood-chip concrete shuttering blocks. Product properties and performance
BS EN 15603:2008 Energy performance of buildings. Overall energy use and definition of energy ratings
DIN EN 16153:2015-05 LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
02/103010 DC : DRAFT APR 2002 PREN 13914-2 - DESIGN, PREPARATION AND APPLICATION OF EXTERNAL RENDERING AND INTERNAL PLASTERING - PART 2: INTERNAL PLASTERING
CEN/TR 15615:2008 Explanation of the general relationship between various European standards and the Energy Performance of Buildings Directive (EPBD) - Umbrella Document
UNI EN 13369 : 2013 COMMON RULES FOR PRECAST CONCRETE PRODUCTS
UNE-EN 12602:2011 Prefabricated reinforced components of autoclaved aerated concrete
NF EN 15191 : 2010 PRECAST CONCRETE PRODUCTS - CLASSIFICATION OF GLASSFIBRE REINFORCED CONCRETE PERFORMANCES
I.S. EN 16240:2013 LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
PREN 14190 : DRAFT 2011 GYPSUM PLASTERBOARD PRODUCTS FROM PROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS
PREN ISO 13792 : DRAFT 2010 THERMAL PERFORMANCE OF BUILDINGS - CALCULATION OF INTERNAL TEMPERATURES OF A ROOM IN SUMMER WITHOUT MECHANICAL COOLING - SIMPLIFIED METHODS
PREN 14509 : DRAFT 2013 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
DIN EN 1457-2:2016-10 (Draft) Chimneys - Clay/ceramic flue liners - Part 2: Flue liners operating under wet conditions - Requirements and test methods; German and English version prEN 1457-2:2016
UNI EN 15498 : 2008 PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE
UNI EN 14318-2 : 2013 THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED DISPENSED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED INSULATION PRODUCTS
PREN 15191 : DRAFT 2009 PRECAST CONCRETE PRODUCTS - CLASSIFICATION OF GLASS-FIBRE REINFORCED CONCRETE PERFORMANCES
UNI EN 1457-2 : 2012 CHIMNEYS - CLAY/CERAMIC FLUE LINERS - PART 2: FLUE LINERS OPERATING UNDER WET CONDITIONS - REQUIREMENTS AND TEST METHODS
I.S. EN 14509:2013 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
I.S. EN 15498:2008 PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE
DIN EN 12859:2011-05 Gypsum blocks - Definitions, requirements and test methods
DIN EN 673:2011-04 Glass in building - Determination of thermal transmittance (U value) - Calculation method
DIN EN 13964:2014-08 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
DIN EN 15319 E : 2007 GENERAL PRINCIPLES OF DESIGN OF FIBROUS (GYPSUM) PLASTER WORKS
UNE-EN 14509:2014 Self-supporting double skin metal faced insulating panels - Factory made products - Specifications
BS EN 1520:2011 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
UNE-EN 12859:2012 Gypsum blocks - Definitions, requirements and test methods
I.S. EN 1745:2012 MASONRY AND MASONRY PRODUCTS - METHODS FOR DETERMINING THERMAL PROPERTIES
EN 1745:2012 Masonry and masonry products - Methods for determining thermal properties
EN 13964:2014 Suspended ceilings - Requirements and test methods
EN 673:2011 Glass in building - Determination of thermal transmittance (U value) - Calculation method
EN 16240:2013 Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
UNI EN 12859 : 2011 GYPSUM BLOCKS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNI EN 14509 : 2013 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
UNI EN 1520 : 2011 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non- structural reinforcement
UNI EN ISO 13792 : 2012 THERMAL PERFORMANCE OF BUILDINGS - CALCULATION OF INTERNAL TEMPERATURES OF A ROOM IN SUMMER WITHOUT MECHANICAL COOLING - SIMPLIFIED METHODS
UNI EN 14190 : 2014 GYPSUM BOARD PRODUCTS FROM REPROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNI EN 673 : 2011 GLASS IN BUILDING - DETERMINATION OF THERMAL TRANSMITTANCE (U VALUE) - CALCULATION METHOD
UNI EN 13964 : 2014 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
UNI EN 12831 : 2006 HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD
UNI EN 14246 : 2006 GYPSUM ELEMENTS FOR SUSPENDED CEILINGS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNI EN 13279-1 : 2008 GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS
DIN EN 14319-2:2013-04 Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 2: Specification for the installed insulation products
DIN EN 16240:2014-03 LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
98/106350 DC : DRAFT JULY 1998 PREN 13279-1 - GYPSUM AND GYPSUM BASED BUILDING PLASTER - PART 1: DEFINITIONS AND REQUIREMENTS
UNI EN 14315-2 : 2013 THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED SPRAYED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED INSULATION PRODUCTS
BS EN 14063-2:2013 Thermal insulation products for buildings. In-situ formed expanded clay lightweight aggregate products Specification for the installed products
DIN EN 14317-2 E : 2007 THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED PRODUCTS
14/30309932 DC : 0 BS EN 12831-1 - HEATING SYSTEMS AND WATER BASED COOLING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD - PART 1: SPACE HEATING LOAD
DIN EN 15498 E : 2008 PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE
06/30149044 DC : DRAFT APR 2006 EN 13947 - THERMAL PERFORMANCE OF CURTAIN WALLING - CALCULATION OF THERMAL TRANSMITTANCE
PREN 13369 : DRAFT 2017 COMMON RULES FOR PRECAST CONCRETE PRODUCTS
PREN 14063-2 : DRAFT 2012 THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED PRODUCTS
BS EN 16025-2:2013 Thermal and/or sound insulating products in building construction. Bound EPS ballastings Processing of the factory premixed EPS dry plaster
DIN EN 15603 E : 2008 ENERGY PERFORMANCE OF BUILDINGS - OVERALL ENERGY USE AND DEFINITION OF ENERGY RATINGS
13/30217369 DC : 0 BS EN 13964 - SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
UNI EN 14319-2 : 2013 THERMAL INSULATING PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU FORMED DISPENSED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED INSULATION PRODUCTS
BS EN 14317-2:2007 Thermal insulation products for buildings. In-situ thermal insulation formed from exfoliated vermiculite (EV) products Specification for the installed products
DIN EN 14320-2 E : 2013 THERMAL INSULATING PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU FORMED SPRAYED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED INSULATION PRODUCTS
I.S. EN 50583-2:2016 PHOTOVOLTAICS IN BUILDINGS - PART 2: BIPV SYSTEMS
17/30357433 DC BS EN 13279-1. Gypsum binders and gypsum plasters. Part 1. Definitions and requirements
10/30239602 DC : DRAFT DEC 2010 BS EN 1457-2 - CHIMNEY - CLAY CERAMIC FLUE LINERS - PART 2: FLUE LINERS OPERATING UNDER WET CONDITIONS - REQUIREMENTS AND TEST METHODS
UNE-EN 13369:2013 Common rules for precast concrete products
PREN 50583 : DRAFT 2012 PHOTOVOLTAICS IN BUILDINGS
BS EN 1457-2:2012 Chimneys. Clay/ceramic flue liners Flue liners operating under wet conditions. Requirements and test methods
DIN EN 14509 E : 2013 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
BS EN 14064-2:2010 Thermal insulation products for buildings. In-situ formed loose-fill mineral wool (MW) products Specification for the installed products
08/30187751 DC : 0 BS EN 1457-1 - CHIMNEYS - CLAY/CERAMIC FLUE LINERS - PART 1: FLUE LINERS OPERATING UNDER DRY CONDITIONS - REQUIREMENTS AND TEST METHODS
UNE-EN ISO 13791:2013 Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - General criteria and validation procedures (ISO 13791:2012)
DIN EN 14315-2:2013-04 THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED SPRAYED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED INSULATION PRODUCTS
DIN 4108-2:2013-02 THERMAL PROTECTION AND ENERGY ECONOMY IN BUILDINGS - PART 2: MINIMUM REQUIREMENTS TO THERMAL INSULATION
16/30338240 DC BS EN 1457-1. Chimney. Clay/ceramic flue liners. Part 1. Flue liners operating under dry conditions. Requirements and test methods
I.S. EN 14316-2:2007 THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED PRODUCTS
I.S. EN 14320-2:2013 THERMAL INSULATING PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU FORMED SPRAYED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED INSULATION PRODUCTS
PREN 12859 : DRAFT 2010 GYPSUM BLOCKS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
PREN 13031-1 : DRAFT 2017 GREENHOUSES - DESIGN AND CONSTRUCTION - PART 1: COMMERCIAL PRODUCTION GREENHOUSES
UNE-EN 14318-2:2013 Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 2: Specification for the installed insulation products
EN 13369:2018 Common rules for precast concrete products
I.S. EN 15191:2009 PRECAST CONCRETE PRODUCTS - CLASSIFICATION OF GLASSFIBRE REINFORCED CONCRETE PERFORMANCE
I.S. EN 14318-2:2013 THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED DISPENSED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED INSULATION PRODUCTS
I.S. EN 13279-1:2008 GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS
DIN EN 14190:2014-09 Gypsum board products from reprocessing - Definitions, requirements and test methods
BS EN 13815:2006 Fibrous gypsum plaster casts. Definitions, requirements and test methods
BS EN 1806:2006 Chimneys Clay/ceramic flue blocks for single wall chimneys Requirements and test methods
BS EN 1745:2012 Masonry and masonry products. Methods for determining thermal properties
BS EN ISO 13793:2001 Thermal performance of buildings. Thermal design of foundations to avoid frost heave
ISO 10211-1:1995 Thermal bridges in building construction Heat flows and surface temperatures Part 1: General calculation methods
BS EN 1946-4:2000 Measurements by hot box methods
DIN EN 15319:2007-10 General principles of design of fibrous (gypsum) plaster works
UNE-EN 14190:2014 Gypsum board products from reprocessing - Definitions, requirements and test methods
DIN EN 15318 E : 2008 DESIGN AND APPLICATION OF GYPSUM BLOCKS
BS EN 13279-1:2008 Gypsum binders and gypsum plasters Definitions and requirements
BS EN 15318:2007 Design and application of gypsum blocks
UNE-EN 1873:2015 Prefabricated accessories for roofing - Individual rooflights of plastics - Product specification and test methods
BS EN 14246:2006 Gypsum elements for suspended ceilings. Definitions, requirements and test methods
UNE-EN 15037-3:2010 Precast concrete products - Beam-and-block floor systems - Part 3: Clay blocks
BS EN 13500:2003 Thermal insulation products for buildings. External thermal insulation composite systems (ETICS) based on mineral wool. Specification
BS EN 12860:2001 Gypsum based adhesives for gypsum blocks. Definitions, requirements and test methods
BS EN 12859:2011 Gypsum blocks. Definitions, requirements and test methods
EN 1946-4:2000 Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 4: Measurements by hot box methods
EN 14063-2:2013 Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 2: Specification for the installed products
EN 14190:2014 Gypsum board products from reprocessing - Definitions, requirements and test methods
EN 16153:2013+A1:2015 Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
EN 14963:2006 Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods
EN 14316-2:2007 Thermal insulating products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2: Specification for the installed products
EN 14319-2:2013 Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 2: Specification for the installed insulation products
EN 15498:2008 Precast concrete products - Wood-chip concrete shuttering blocks - Product properties and performance
EN 14246:2006/AC:2007 GYPSUM ELEMENTS FOR SUSPENDED CEILINGS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
EN ISO 13792:2012 Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - Simplified methods (ISO 13792:2012)
EN 13815:2006 Fibrous gypsum plaster casts - Definitions, requirements and test methods
EN ISO 13791:2012 Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - General criteria and validation procedures (ISO 13791:2012)
EN 14315-2:2013 Thermal insulating products for buildings - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 2: Specification for the installed insulation products
EN 14509:2013 Self-supporting double skin metal faced insulating panels - Factory made products - Specifications
EN 15318 : 2007 DESIGN AND APPLICATION OF GYPSUM BLOCKS
EN 14318-2:2013 Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 2: Specification for the installed insulation products
EN 15603:2008 Energy performance of buildings - Overall energy use and definition of energy ratings
EN 16855-1:2017 Walk-in cold rooms - Definition, thermal insulation performance and test methods - Part 1: Prefabricated cold room kits
EN 15037-4:2010+A1:2013 Precast concrete products - Beam-and-block floor systems - Part 4: Expanded polystyrene blocks
EN 1520:2011 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
EN 1873:2014+A1:2016 Prefabricated accessories for roofing - Individual rooflights of plastics - Product specification and test methods
EN 1457-1:2012 Chimneys - Clay/ceramic flue liners - Part 1: Flue liners operating under dry conditions - Requirements and test methods
EN 15037-3:2009+A1:2011 Precast concrete products - Beam-and-block floor systems - Part 3: Clay blocks
EN 14317-2:2007 Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 2: Specification for the installed products
EN 16012:2012+A1:2015 Thermal insulation for buildings - Reflective insulation products - Determination of the declared thermal performance
EN 16286-1:2013 Railway applications - Gangway systems between vehicles - Part 1: Main applications
EN ISO 10211-1 : 95 COR 2002 THERMAL BRIDGES IN BUILDING CONSTRUCTION - CALCULATION OF HEAT FLOWS AND SURFACE TEMPERATURES - PART 1: GENERAL METHODS
EN 15319 : 2007 GENERAL PRINCIPLES OF DESIGN OF FIBROUS (GYPSUM) PLASTER WORKS
EN 1934:1998 Thermal performance of buildings - Determination of thermal resistance by hot box method using heat flow meter - Masonry
EN 14064-2:2010 Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 2: Specification for the installed products
EN 1457-2:2012 Chimneys - Clay/ceramic flue liners - Part 2: Flue liners operating under wet conditions - Requirements and test methods
EN 16025-2:2013 Thermal and/ or sound insulating products in building construction - Bound EPS ballastings - Part 2: Processing of the factory premixed EPS dry plaster
EN 14320-2:2013 Thermal insulating products for building equipment and industrial installations - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 2: Specification for the installed insulation products
EN 16809-2:2017 Thermal insulation products of buildings - In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 2: Specification for the bonded and loose-fill products after installation
EN 15191:2009 Precast concrete products - Classification of glassfibre reinforced concrete performance
EN 1806:2006 Chimneys - Clay/ceramic flue blocks for single wall chimneys - Requirements and test methods
DIN EN 12831-1:2017-09 ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD - PART 1: SPACE HEATING LOAD, MODULE M3-3
17/30354084 DC : 0 BS EN 16855-2 - WALK-IN COLD ROOMS - DEFINITION, THERMAL INSULATION PERFORMANCE AND TEST METHODS - PART 2: CUSTOMIZED COLD ROOMS
BS EN 14963:2006 Roof coverings. Continuous rooflights of plastics with or without upstands. Classification, requirements and test methods
DIN EN 14318-2:2013-04 THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED DISPENSED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED INSULATION PRODUCTS
12/30237844 DC : 0 BS ISO 16346 - ENERGY PERFORMANCE OF BUILDINGS - ASSESSMENT OF OVERALL ENERGY PERFORMANCE
I.S. EN 16025-2:2013 THERMAL AND/OR SOUND INSULATING PRODUCTS IN BUILDING CONSTRUCTION - BOUND EPS BALLASTINGS - PART 2: PROCESSING OF THE FACTORY PREMIXED EPS DRY PLASTER
UNE-EN 15319:2012 General principles of design of fibrous (gypsum) plaster works
I.S. EN 12831:2003 HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD
UNE-EN ISO 13792:2013 Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - Simplified methods (ISO 13792:2012)
PD CEN/TR 15615:2008 Explanation of the general relationship between various CEN standards and the Energy Performance of Buildings Directive (EPBD). Umbrella document
04/30126138 DC : 0 EN 15100-2 - THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED UREAFORMALDEHYDE FOAM (UF) PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED INSULATION PRODUCTS
DIN EN 14319-2 E : 2013 THERMAL INSULATING PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU FORMED DISPENSED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED INSULATION PRODUCTS
BS EN 16012 : 2012 THERMAL INSULATION FOR BUILDINGS - REFLECTIVE INSULATION PRODUCTS - DETERMINATION OF THE DECLARED THERMAL PERFORMANCE
17/30354239 DC : 0 BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS
BS EN 16855-1:2017 Walk-in cold rooms. Definition, thermal insulation performance and test methods Prefabricated cold room kits
DIN EN 14318-2 E : 2013 THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED DISPENSED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED INSULATION PRODUCTS
BS EN 14319-2:2013 Thermal insulating products for building equipment and industrial installations. In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products Specification for the installed insulation products
09/30200445 DC : 0 BS EN 15191 - PRECAST CONCRETE PRODUCTS - CLASSIFICATION OF GLASS-FIBRE REINFORCED CONCRETE PERFORMANCES
DIN EN 16025-2:2013-07 THERMAL AND/OR SOUND INSULATING PRODUCTS IN BUILDING CONSTRUCTION - BOUND EPS BALLASTINGS - PART 2: PROCESSING OF THE FACTORY PREMIXED EPS DRY PLASTER
I.S. EN 14317-2:2007 THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED PRODUCTS
DIN EN 16286-1:2013-06 Railway applications - Gangway systems between vehicles - Part 1: Main applications
08/30187754 DC : 0 BS EN 1457-2 - CHIMNEYS - CLAY/CERAMIC FLUE LINERS - PART 2: FLUE LINERS OPERATING UNDER WET CONDITIONS - REQUIREMENTS AND TEST METHODS
DIN EN 15037-3:2011-07 Precast concrete products - Beam-and-block floor systems - Part 3: Clay blocks (includes Amendment A1:2011)
04/30099887 DC : DRAFT MAY 2004 PREN 14963 - ROOF COVERINGS - CONTINUOUS ROOFLIGHTS OF PLASTICS WITH UPSTANDS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS
12/30258114 DC : 0 BS EN 14063-2 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED PRODUCTS
BS EN 1457-1:2012 Chimneys. Clay/ceramic flue liners Flue liners operating under dry conditions. Requirements and test methods
02/101686 DC : DRAFT FEB 2002 PREN 14317-1 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION
UNI EN 16025-2 : 2013 THERMAL AND/OR SOUND INSULATING PRODUCTS IN BUILDING CONSTRUCTION - BOUND EPS BALLASTINGS - PART 2: PROCESSING OF THE FACTORY PREMIXED EPS DRY PLASTER
PREN 13964 : DRAFT 2013 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
UNE-EN 16286-1:2014 Railway applications - Gangway systems between vehicles - Part 1: Main applications
UNI EN 14063-2 : 2013 THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED PRODUCTS
UNE-EN 15037-4:2010 Precast concrete products - Beam-and-block floor systems - Part 4: Expanded polystyrene blocks
I.S. EN 14063-2:2013 THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED PRODUCTS
I.S. EN 16153:2013 LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
DIN EN 13369:2013-08 COMMON RULES FOR PRECAST CONCRETE PRODUCTS
I.S. EN 15037-3:2009 PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 3: CLAY BLOCKS
I.S. EN 13369:2018 COMMON RULES FOR PRECAST CONCRETE PRODUCTS
BS EN 15037-4 : 2010 PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 4: EXPANDED POLYSTYRENE BLOCKS
UNE-EN 13815:2012 Fibrous gypsum plaster casts - Definitions, requirements and test methods
17/30354665 DC : 0 BS EN 13031-1 - GREENHOUSES - DESIGN AND CONSTRUCTION - PART 1: COMMERCIAL PRODUCTION GREENHOUSES
I.S. EN 15603:2008 ENERGY PERFORMANCE OF BUILDINGS - OVERALL ENERGY USE AND DEFINITION OF ENERGY RATINGS
UNI EN 15191 : 2010 PRECAST CONCRETE PRODUCTS - CLASSIFICATION OF GLASSFIBRE REINFORCED CONCRETE PERFORMANCE
I.S. EN 12602:2016 PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE
DIN EN 14246 E : 2006 GYPSUM ELEMENTS FOR SUSPENDED CEILINGS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
BS EN 12428:2013 Industrial, commercial and garage doors. Thermal transmittance. Requirements for the calculation
UNE-EN 13964:2016 Suspended ceilings - Requirements and test methods
ISO 13792:2012 Thermal performance of buildings Calculation of internal temperatures of a room in summer without mechanical cooling Simplified methods
UNE-EN 673:2011 Glass in building - Determination of thermal transmittance (U value) - Calculation method
BS EN 15319:2007 General principles of design of fibrous (gypsum) plaster works
BS EN 13125:2001 Shutters and blinds. Additional thermal resistance. Allocation of a class of air permeability to a product
BS EN 13964:2014 Suspended ceilings. Requirements and test methods
EN 12428:2013 Industrial, commercial and garage doors - Thermal transmittance - Requirements for the calculation
DIN EN 14316-2:2007-04 Thermal insulating products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2: Specification for the installed products
EN 13279-1:2008 Gypsum binders and gypsum plasters - Part 1: Definitions and requirements
DIN EN ISO 13791:2012-08 THERMAL PERFORMANCE OF BUILDINGS - CALCULATION OF INTERNAL TEMPERATURES OF A ROOM IN SUMMER WITHOUT MECHANICAL COOLING - GENERAL CRITERIA AND VALIDATION PROCEDURES (ISO 13791:2012)
EN 13125:2001 Shutters and blinds - Additional thermal resistance - Allocation of a class of air permeability to a product
DIN EN 1457-2:2012-04 Chimneys - Clay/ceramic flue liners - Part 2: Flue liners operating under wet conditions - Requirements and test methods
UNE-EN 16153:2013 Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods

ISO 13789:2017 Thermal performance of buildings — Transmission and ventilation heat transfer coefficients — Calculation method
CEN/TS 16629:2014 Energy Performance of Buildings - Detailed Technical Rules for the set of EPB-standards
ISO 10211:2017 Thermal bridges in building construction — Heat flows and surface temperatures — Detailed calculations
CEN/TS 16628:2014 Energy Performance of Buildings - Basic Principles for the set of EPB standards
ISO 52000-1:2017 Energy performance of buildings — Overarching EPB assessment — Part 1: General framework and procedures
ISO/TR 52019-2:2017 Energy performance of buildings Hygrothermal performance of building components and building elements Part 2: Explanation and justification
ISO 10456:2007 Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values
ISO/TR 52000-2:2017 Energy performance of buildings Overarching EPB assessment Part 2: Explanation and justification of ISO 52000-1
ISO 7345:1987 Thermal insulation Physical quantities and definitions

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.