EN ISO 7010 : 2012 AMD 7 2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - REGISTERED SAFETY SIGNS (ISO 7010:2011/AMD 7:2016)
Superseded date
04-07-2020
Published date
01-12-2013
Publisher
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Referents and categorization of safety signs
5 Registered safety signs
Bibliography
Specifies safety signs for the purposes of accident prevention, fire protection, health hazard information and emergency evacuation.
| Committee |
SS F16
|
| DevelopmentNote |
2012 Edition Re-issued in January 2015 & incorporates AMD 5 2015. (02/2015)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DS EN ISO 7010 : 2012 AMD 7 2017 | Identical |
| DIN EN ISO 7010/A7:2017-08 | Identical |
| I.S. EN ISO 7010:2012 | Identical |
| BS EN ISO 7010 : 2012 | Identical |
| ISO 7010:2011 | Identical |
| NEN EN ISO 7010 : 2012 AMD 7 2017 | Identical |
| NBN EN ISO 7010 : 2012 AMD 5 2015 | Identical |
| PN EN ISO 7010 : 2012 AMD 7 2017 | Identical |
| NF EN ISO 7010 : 2013 AMD 7 2017 | Identical |
| ONORM EN ISO 7010 : 2015 AMD 7 2017 | Identical |
| DIN EN ISO 7010 E : 2012 | Identical |
| UNI EN ISO 7010 : 2014 | Identical |
| NS EN ISO 7010 : 2012 AMD 7 2017 | Identical |
| UNI EN ISO 7010 : 2017 | Identical |
| DIN EN ISO 7010:2012-10 | Identical |
| I.S. EN 16712-2:2015 | PORTABLE EQUIPMENT FOR PROJECTING EXTINGUISHING AGENTS SUPPLIED BY FIRE FIGHTING PUMPS - PORTABLE FOAM EQUIPMENT - PART 2: PICK-UP TUBES |
| CEI EN 60601-1-11 : 2016 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-11: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS USED IN THE HOME HEALTHCARE ENVIRONMENT |
| BS EN 16564:2014 | Machines and plants for mining and tooling of natural stone. Safety. Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
| BS EN 60601-1-11:2015 | Medical electrical equipment General requirements for basic safety and essential performance. Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment |
| 14/30288853 DC : 0 | BS PD CEN/TS 15989 - FIREFIGHTING AND RESCUE SERVICE VEHICLES AND EQUIPMENT - GRAPHICAL SYMBOLS FOR CONTROL ELEMENTS AND DISPLAYS AND FOR MARKINGS |
| 14/30302903 DC : 0 | BS EN 16774 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STEEL CONVERTER AND ASSOCIATED EQUIPMENT |
| I.S. EN 50636-2-107:2015 | SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-107: PARTICULAR REQUIREMENTS FOR ROBOTIC BATTERY POWERED ELECTRICAL LAWNMOWERS |
| DIN EN 16564 E : 2015 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS |
| DIN EN 16712-2:2015-12 | PORTABLE EQUIPMENT FOR PROJECTING EXTINGUISHING AGENTS SUPPLIED BY FIRE FIGHTING PUMPS - PORTABLE FOAM EQUIPMENT - PART 2: PICK-UP TUBES |
| BS EN 82079-1:2012 | Preparation of instructions for use. Structuring, content and presentation General principles and detailed requirements |
| 13/30241462 DC : 0 | BS EN 16186-2 - RAILWAY APPLICATIONS - DRIVER'S CAB - PART 2: INTEGRATION OF DISPLAYS, CONTROLS AND INDICATORS |
| DIN EN 16564:2015-04 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
| 13/30273033 DC : 0 | BS EN 1012-3 - COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
| DIN EN 415-10:2014-07 | SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
| PRCEN/TS 15989 : DRAFT 2014 | FIREFIGHTING AND RESCUE SERVICE VEHICLES AND EQUIPMENT - GRAPHICAL SYMBOLS FOR CONTROL ELEMENTS AND DISPLAYS AND FOR MARKINGS |
| BS EN 60601-1-12:2015 | Medical electrical equipment General requirements for basic safety and essential performance. Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment |
| BS EN 16712-2:2015 | Portable equipment for projecting extinguishing agents supplied by fire fighting pumps. Portable foam equipment Pick-up tubes |
| PREN 474-1 : DRAFT 2017 | EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| 13/30276226 DC : 0 | BS EN 16564 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS |
| BS EN 15180:2014 | Food processing machinery. Food depositors. Safety and hygiene requirements |
| PREN 15194 : DRAFT 2015 | CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES |
| PREN 15572 : DRAFT 2013 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
| UNE-EN 50547:2013 | Railway applications - Batteries for auxiliary power supply systems |
| I.S. EN 15180:2014 | FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 1012-3:2013 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
| PREN 15163 : DRAFT 2014 | MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS AND DIAMOND MULTI-WIRE SAWS |
| PREN 1069-2 : DRAFT 2015 | WATER SLIDES - PART 2: INSTRUCTIONS |
| I.S. EN 378-2:2016 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION |
| I.S. EN 415-10:2014 | SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
| I.S. EN 16564:2014 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS |
| I.S. EN 50570:2013 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS |
| I.S. EN 62841-1:2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| UNI EN 15180 : 2014 | FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 50636-2-94:2014 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-94: PARTICULAR REQUIREMENTS FOR SCISSORS TYPE GRASS SHEARS |
| EN 15567-1:2015 | Sports and recreational facilities - Ropes courses - Part 1: Construction and safety requirements |
| BS EN 60519-1:2015 | Safety in installations for electroheating and electromagnetic processing General requirements |
| UNE-EN 378-2:2017 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation |
| BS EN 13743:2017 | Safety requirements for coated abrasive products |
| BS EN 1838:2013 | Lighting applications. Emergency lighting |
| BS EN 62477-1 : 2012 | SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL (IEC 62477-1:2012) |
| EN 61010-2-012:2016 | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment |
| EN 12312-4:2014 | Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges |
| EN 60519-1:2015 | Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements |
| EN 50636-2-94:2014 | Household and similar electrical appliances - Safety - Part 2-94: Particular requirements for scissors type grass shears |
| CEN/TS 15989:2015 | Firefighting and rescue service vehicles and equipment - Graphical symbols for control elements and displays and for markings |
| DIN EN 14033-2:2017-10 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 2: TECHNICAL REQUIREMENTS FOR TRAVELLING AND WORKING |
| EN 1012-3:2013 | Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors |
| CEI EN 62841-1 : 2016 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| DIN EN 16740 E : 2016 | EMISSION SAFETY OF COMBUSTIBLE AIR FRESHENERS - USER SAFETY INFORMATION |
| 16/30339514 DC : 0 | BS EN 17003 - ROAD VEHICLES - ROLLER BRAKE TESTERS FOR VEHICLES OF MORE THAN 3,5 TONS GVW - SAFETY REQUIREMENTS |
| 14/30294816 DC : 0 | BS EN 16713-1 - DOMESTIC SWIMMING POOLS - WATER SYSTEMS - PART 1: FILTRATION SYSTEMS - REQUIREMENTS AND TEST METHODS |
| BS EN 62282-5-1:2012 | Fuel cell technologies Portable fuel cell power systems. Safety |
| BS EN 16740:2015 | Emission safety of combustible air fresheners. User safety information |
| 13/30277660 DC : 0 | BS EN 60335-2-89:2010/AA - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-89: PARTICULAR REQUIREMENTS FOR COMMERCIAL REFRIGERATING APPLIANCES WITH AN INCORPORATED OR REMOTE REFRIGERANT CONDENSING UNIT OR COMPRESSOR |
| 15/30321305 DC : 0 | BS EN 15194 - CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES |
| DIN EN 16740:2016-04 | EMISSION SAFETY OF COMBUSTIBLE AIR FRESHENERS - USER SAFETY INFORMATION |
| I.S. EN 62368-1:2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED) |
| BS EN 16263-5:2015 | Pyrotechnic articles. Other pyrotechnic articles Minimum labelling requirements and instructions for use |
| 15/30324197 DC : 0 | BS EN 16186-2 - RAILWAY APPLICATIONS - DRIVER'S CAB - PART 2: INTEGRATION OF DISPLAYS, CONTROLS AND INDICATORS |
| DIN EN 15571:2015-03 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines |
| DIN EN 16264:2014-11 | PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - CARTRIDGES FOR POWDER ACTUATED TOOLS |
| 13/30276223 DC : 0 | BS EN 15572 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
| I.S. EN 50628:2016 | ERECTION OF ELECTRICAL INSTALLATIONS IN UNDERGROUND MINES |
| CEI EN 50636-2-107 : 2016 | SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-107: PARTICULAR REQUIREMENTS FOR ROBOTIC BATTERY POWERED ELECTRICAL LAWNMOWERS |
| BS EN 1672-1:2014 | Food processing machinery. Basic concepts Safety requirements |
| 17/30353686 DC : 0 | BS EN 50570:2013 AMD 1 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS |
| PREN 131-3 : DRAFT 2016 | LADDERS - PART 3: MARKING AND USER INSTRUCTIONS |
| DIN EN 16712-2 E : 2015 | PORTABLE EQUIPMENT FOR PROJECTING EXTINGUISHING AGENTS SUPPLIED BY FIRE FIGHTING PUMPS - PORTABLE FOAM EQUIPMENT - PART 2: PICK-UP TUBES |
| BS EN 61010-2-010:2014 | Safety requirements for electrical equipment for measurement, control and laboratory use Particular requirements for laboratory equipment for the heating of Materials |
| I.S. EN 62366-1:2015 | MEDICAL DEVICES - PART 1: APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES |
| UNE-EN 16264:2015 | Pyrotechnic articles - Other pyrotechnic articles - Cartridges for powder actuated tools |
| EN 50604-1:2016 | Secondary lithium batteries for light EV (electric vehicle) applications - Part 1: General safety requirements and test methods |
| I.S. EN 16264:2014 | PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - CARTRIDGES FOR POWDER ACTUATED TOOLS |
| I.S. EN 62366-1:2015&AC:2015 | MEDICAL DEVICES - PART 1: APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES |
| BS EN 15194:2017 | Cycles. Electrically power assisted cycles. EPAC Bicycles |
| BS EN 14033-2:2017 | Railway applications. Track. Railbound construction and maintenance machines Technical requirements for travelling and working |
| EN IEC 62928:2018 | Railway applications - Rolling stock - Onboard lithium-ion traction batteries |
| DIN EN 536:2016-01 | ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS |
| UNE-EN 81-73:2016 | Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts - Part 73: Behaviour of lifts in the event of fire |
| BS EN 15567-1:2015 | Sports and recreational facilities. Ropes courses Construction and safety requirements |
| UNE-EN 1838:2016 | Lighting applications - Emergency lighting |
| UNE-EN 61010-2-010:2015 | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of Materials |
| EN 61010-2-010:2014 | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of Materials |
| I.S. EN 1838:2013 | LIGHTING APPLICATIONS - EMERGENCY LIGHTING |
| I.S. EN 203-2-7:2014 | GAS HEATED CATERING EQUIPMENT - PART 2-7: SPECIFIC REQUIREMENTS - SALAMANDERS AND ROTISSERIES |
| I.S. EN 13743:2017 | SAFETY REQUIREMENTS FOR COATED ABRASIVE PRODUCTS |
| EN 16564:2014 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
| I.S. EN 13782:2015 | TEMPORARY STRUCTURES - TENTS - SAFETY |
| I.S. EN 12312-4:2014 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 4: PASSENGER BOARDING BRIDGES |
| EN 15571:2014 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines |
| I.S. EN 536:2015 | ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS |
| VDI 6017:2015-08 | Lifts - Fire recall systems |
| VDI 4062:2016-04 | Emergency evacuation of people |
| DIN EN 14033-1:2014-08 (Draft) | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING |
| 16/30312315 DC : 0 | BS EN ISO 80601-2-55 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-55: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS |
| DIN EN 15180:2015-01 | FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
| CEI EN 50604-1 : 1ED 2017 | SECONDARY LITHIUM BATTERIES FOR LIGHT EV (ELECTRIC VEHICLE) APPLICATIONS - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
| 17/30361773 DC : DRAFT SEP 2017 | BS EN 17164 - CLIMBING WALLS FOR USE IN THE WATER AREA OF PUBLIC USED SWIMMING POOLS - SAFETY AND OPERATIONAL REQUIREMENTS TO THE PLACE OF INSTALLATION |
| BS EN 50604-1:2016 | Secondary lithium batteries for light EV (electric vehicle) applications General safety requirements and test methods |
| UNE-EN 13637:2016 | Building hardware - Electrically controlled exit systems for use on escape routes - Requirements and test methods |
| DIN EN 14033-2:2014-08 (Draft) | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 2: TECHNICAL REQUIREMENTS FOR TRAVELLING AND WORKING |
| I.S. EN 13637:2015 | BUILDING HARDWARE - ELECTRICALLY CONTROLLED EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| BS EN 50636-2-94:2014 | Household and similar electrical appliances. Safety Particular requirements for scissors type grass shears |
| BS EN 50434:2014 | Safety of household and similar appliances. Particular requirements for mains operated shredders and chippers |
| UNE-EN 16564:2015 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
| UNE-EN 16713-1:2017 | Domestic swimming pools - Water systems - Part 1: Filtration systems - Requirements and test methods |
| 15/30330735 DC : 0 | BS EN 13743 - SAFETY REQUIREMENTS FOR COATED ABRASIVE PRODUCTS |
| BS EN 16713-1:2016 | Domestic swimming pools. Water systems Filtration systems. Requirements and test methods |
| BS EN 16264:2014 | Pyrotechnic articles. Other pyrotechnic articles. Cartridges for powder actuated tools |
| UNE 23032:2015 | Fire safety. Graphical symbols for use on plans: design, protection plans and evacuation plans. |
| BS EN 60335-2-89 : 2010 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-89: PARTICULAR REQUIREMENTS FOR COMMERCIAL REFRIGERATING APPLIANCES WITH AN INCORPORATED OR REMOTE REFRIGERANT CONDENSING UNIT OR COMPRESSOR |
| BS EN 1012-3:2013 | Compressors and vacuum pumps. Safety requirements Process compressors |
| BS EN 50636-2-107:2015 | Safety of household and similar appliances Particular requirements for robotic battery powered electrical lawnmowers |
| I.S. EN 16263-5:2015 | PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - PART 5: MINIMUM LABELLING REQUIREMENTS AND INSTRUCTIONS FOR USE |
| I.S. EN 15572:2015 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
| I.S. EN IEC 62820-2:2018 | BUILDING INTERCOM SYSTEMS - PART 2: REQUIREMENTS FOR ADVANCED SECURITY BUILDING INTERCOM SYSTEMS (ASBIS) |
| I.S. EN 60601-1-12:2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-12: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS INTENDED FOR USE IN THE EMERGENCY MEDICAL SERVICES ENVIRONMENT |
| UNI EN 415-10 : 2014 | SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
| EN 50636-2-107 : 2015 AMD 1 2018 | SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-107: PARTICULAR REQUIREMENTS FOR ROBOTIC BATTERY POWERED ELECTRICAL LAWNMOWERS |
| PREN 17164 : DRAFT 2017 | CLIMBING WALLS FOR USE IN THE WATER AREA OF PUBLIC USED SWIMMING POOLS - SAFETY AND OPERATIONAL REQUIREMENTS TO THE PLACE OF INSTALLATION |
| I.S. EN 60335-2-89:2010 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-89: PARTICULAR REQUIREMENTS FOR COMMERCIAL REFRIGERATING APPLIANCES WITH AN INCORPORATED OR REMOTE REFRIGERANT CONDENSING UNIT OR COMPRESSOR |
| I.S. EN 15194:2017 | CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES |
| I.S. EN 131-3:2018 | LADDERS - PART 3: MARKING AND USER INSTRUCTIONS |
| DIN EN 1838:2013-10 | LIGHTING APPLICATIONS - EMERGENCY LIGHTING |
| DIN EN 81-73:2016-06 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PARTICULAR APPLICATIONS FOR PASSENGER AND GOODS PASSENGER LIFTS - PART 73: BEHAVIOUR OF LIFTS IN THE EVENT OF FIRE |
| DIN EN 13782:2015-06 | TEMPORARY STRUCTURE - TENTS - SAFETY |
| DIN EN 13743:2016-01 (Draft) | SAFETY REQUIREMENTS FOR COATED ABRASIVE PRODUCTS |
| I.S. EN 81-73:2016 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PARTICULAR APPLICATIONS FOR PASSENGER AND GOODS PASSENGER LIFTS - PART 73: BEHAVIOUR OF LIFTS IN THE EVENT OF FIRE |
| EN 60601-1-12:2015 | Medical electrical equipment - Part 1-12: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment |
| EN 81-73:2016 | Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts - Part 73: Behaviour of lifts in the event of fire |
| EN 62366-1:2015/AC:2015 | MEDICAL DEVICES - PART 1: APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES (IEC 62366-1:2015) |
| EN 13743:2017 | Safety requirements for coated abrasive products |
| EN 16740:2015 | Emission safety of combustible air fresheners - User safety information |
| UNI EN 1012-3 : 2014 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
| UNI EN 1838 : 2013 | LIGHTING APPLICATIONS - EMERGENCY LIGHTING |
| UNI EN 203-2-7 : 2014 | GAS HEATED CATERING EQUIPMENT - PART 2-7: SPECIFIC REQUIREMENTS - SALAMANDERS AND ROTISSERIES |
| UNI EN 12312-4 : 2014 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 4: PASSENGER BOARDING BRIDGES |
| BS EN 15571:2014 | Machines and plants for mining and tooling of natural stone. Safety. Requirements for surface finishing machines |
| 16/30338537 DC : 0 | BS EN 131-3 - LADDERS - PART 3: MARKING AND USER INSTRUCTIONS |
| DIN EN 16263-5:2015-11 | PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - PART 5: MINIMUM LABELLING REQUIREMENTS AND INSTRUCTIONS FOR USE |
| 14/30297842 DC : 0 | BS EN 15163 - MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS AND DIAMOND MULTI-WIRE SAWS |
| DIN EN 15572:2015-12 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
| I.S. EN 16774:2016 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STEEL CONVERTER AND ASSOCIATED EQUIPMENT |
| BS EN 50547:2013 | Railway applications. Batteries for auxiliary power supply systems |
| BS EN 15572:2015 | Machines and plants for mining and tooling of natural stone. Safety. Requirements for edge finishing machines |
| 15/30325364 DC : 0 | BS EN 1069-2 - WATER SLIDES - PART 2: INSTRUCTIONS |
| BS EN 415-10:2014 | Safety of packaging machines General Requirements |
| DIN EN 15571 E : 2015 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES |
| I.S. EN 82079-1:2012 | PREPARATION OF INSTRUCTIONS FOR USE - STRUCTURING, CONTENT AND PRESENTATION - PART 1: GENERAL PRINCIPLES AND DETAILED REQUIREMENTS (IEC 82079-1:2012 (EQV)) |
| I.S. EN 1672-1:2014 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
| I.S. EN 15571:2014 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES |
| CEI EN 50547 : 2014 | RAILWAY APPLICATIONS - BATTERIES FOR AUXILIARY POWER SUPPLY SYSTEMS |
| DIN EN 16713-1:2016-08 | DOMESTIC SWIMMING POOLS - WATER SYSTEMS - PART 1: FILTRATION SYSTEMS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 14033-2:2017 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 2: TECHNICAL REQUIREMENTS FOR TRAVELLING AND WORKING |
| BS EN 61010-2-012:2016 | Safety requirements for electrical equipment for measurement, control and laboratory use Particular requirements for climatic and environmental testing and other temperature conditioning equipment |
| BS EN 16774:2016 | Safety of machinery. Safety requirements for steel converter and associated equipment |
| UNE-EN 1672-1:2015 | Food processing machinery - Basic concepts - Part 1: Safety requirements |
| I.S. EN 61010-2-012:2016 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT |
| CEI EN 62368-1 : 2016 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| I.S. EN 61010-2-010:2014 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-010: PARTICULAR REQUIREMENTS FOR LABORATORY EQUIPMENT FOR THE HEATING OF MATERIALS |
| I.S. EN 16713-1:2016 | DOMESTIC SWIMMING POOLS - WATER SYSTEMS - PART 1: FILTRATION SYSTEMS - REQUIREMENTS AND TEST METHODS |
| CEI EN 61010-2-012 : 1ED 2017 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT |
| I.S. EN 60601-1-11:2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-11: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS USED IN THE HOME HEALTHCARE ENVIRONMENT |
| EN 378-2:2016 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation |
| PREN 17003 : DRAFT 2016 | ROAD VEHICLES - ROLLER BRAKE TESTERS FOR VEHICLES OF MORE THAN 3,5 TONS GVW - SAFETY REQUIREMENTS |
| EN 62368-1:2014/AC:2017-03 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED) |
| EN IEC 62820-2:2018 | Building intercom systems - Part 2: Requirements for advanced security building intercom systems (ASBIS) |
| EN 131-3:2018 | Ladders - Part 3: Marking and user instructions |
| S.R. CEN/TS 15989:2015 | FIREFIGHTING AND RESCUE SERVICE VEHICLES AND EQUIPMENT - GRAPHICAL SYMBOLS FOR CONTROL ELEMENTS AND DISPLAYS AND FOR MARKINGS |
| BS EN 13782:2015 | Temporary structure. Tents. Safety |
| BS EN 12312-4:2014 | Aircraft ground support equipment. Specific requirements Passenger boarding bridges |
| UNE-EN 13782:2016 | Temporary structure - Tents - Safety |
| UNE-EN 203-2-7:2014 | Gas heated catering equipment - Part 2-7: Specific requirements - Salamanders and rotisseries |
| BS EN 536:2015 | Road construction machines. Mixing plants for road construction materials. Safety requirements |
| I.S. EN 15567-1:2015 | SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS |
| EN 82079-1:2012 | Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailed requirements |
| BS EN 62841-1:2015 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety General requirements |
| BS EN 81-73:2016 | Safety rules for the construction and installation of lifts. Particular applications for passenger and goods passenger lifts Behaviour of lifts in the event of fire |
| DIN EN 13743:2017-04 | SAFETY REQUIREMENTS FOR COATED ABRASIVE PRODUCTS |
| EN 16774:2016 | Safety of machinery - Safety requirements for steel converter and associated equipment |
| EN 13637:2015 | Building hardware - Electrically controlled exit systems for use on escape routes - Requirements and test methods |
| EN 536:2015 | Road construction machines - Mixing plants for road construction materials - Safety requirements |
| EN 415-10:2014 | Safety of packaging machines - Part 10: General Requirements |
| EN 1672-1:2014 | Food processing machinery - Basic concepts - Part 1: Safety requirements |
| EN 203-2-7:2014 | Gas heated catering equipment - Part 2-7: Specific requirements - Salamanders and rotisseries |
| EN 16713-1:2016 | Domestic swimming pools - Water systems - Part 1: Filtration systems - Requirements and test methods |
| EN 16186-2:2017 | Railway applications - Driver's cab - Part 2: Integration of displays, controls and indicators |
| EN 14033-2:2017 | Railway applications - Track - Railbound construction and maintenance machines - Part 2: Technical requirements for travelling and working |
| EN 13782:2015 | Temporary structure - Tents - Safety |
| EN 14033-1:2017 | Railway applications - Track - Railbound construction and maintenance machines - Part 1: Technical requirements for running |
| EN 1838:2013 | Lighting applications - Emergency lighting |
| EN 16712-2:2015 | Portable equipment for projecting extinguishing agents supplied by fire fighting pumps - Portable foam equipment - Part 2: Pick-up tubes |
| EN 15194:2017 | Cycles - Electrically power assisted cycles - EPAC Bicycles |
| EN 15572:2015 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for edge finishing machines |
| EN 15180:2014 | Food processing machinery - Food depositors - Safety and hygiene requirements |
| EN 16263-5:2015 | Pyrotechnic articles - Other pyrotechnic articles - Part 5: Minimum labelling requirements and instructions for use |
| DIN EN 15572 E : 2015 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
| UNE-EN 16712-2:2016 | Portable equipment for projecting extinguishing agents supplied by fire fighting pumps - Portable foam equipment - Part 2: Pick-up tubes |
| DIN EN 1672-1:2014-12 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
| UNI EN 16264 : 2014 | PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - CARTRIDGES FOR POWDER ACTUATED TOOLS |
| CEI EN 50636-2-94 : 2015 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-94: PARTICULAR REQUIREMENTS FOR SCISSORS TYPE GRASS SHEARS |
| 16/30328756 DC : 0 | BS EN 13814-2 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 2: OPERATION, MAINTENANCE AND USE |
| 13/30276220 DC : 0 | BS EN 15571 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES |
| PREN 15571 : DRAFT 2013 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES |
| UNE-EN 15571:2015 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines |
| 16/30339195 DC | BS EN 81-41. Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods. Part 41. Vertical lifting platforms intended for use by persons with impaired mobility |
| PD CEN/TS 15989:2015 | Firefighting and rescue service vehicles and equipment. Graphical symbols for control elements and displays and for markings |
| UNE-EN 16740:2016 | Emission safety of combustible air fresheners - User safety information |
| EN IEC 61010-2-120:2018 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-120: Particular safety requirements for machinery aspects of equipment |
| BS EN 62366-1:2015 | Medical devices Application of usability engineering to medical devices |
| DIN EN 15180 E : 2015 | FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 16186-2:2017 | Railway applications. Driver\'s cab Integration of displays, controls and indicators |
| I.S. EN 62477-1:2012 | SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL |
| BS EN 14033-1:2017 | Railway applications. Track. Railbound construction and maintenance machines Technical requirements for running |
| CEI EN 82079-1 : 2013 | PREPARATION OF INSTRUCTIONS FOR USE - STRUCTURING, CONTENT AND PRESENTATION - PART 1: GENERAL PRINCIPLES AND DETAILED REQUIREMENTS |
| DIN EN 13637:2015-12 | BUILDING HARDWARE - ELECTRICALLY CONTROLLED EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| UNE-EN 16263-5:2016 | Pyrotechnics articles - Other pyrotechnic articles - Part 5: Minimum labelling requirements and instructions for use |
| I.S. EN 16186-2:2017 | RAILWAY APPLICATIONS - DRIVER'S CAB - PART 2: INTEGRATION OF DISPLAYS, CONTROLS AND INDICATORS |
| I.S. EN 50547:2013 | RAILWAY APPLICATIONS - BATTERIES FOR AUXILIARY POWER SUPPLY SYSTEMS |
| EN 60601-1-11:2015 | Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment |
| EN 60335-2-89:2010/A2:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-89: PARTICULAR REQUIREMENTS FOR COMMERCIAL REFRIGERATING APPLIANCES WITH AN INCORPORATED OR REMOTE REFRIGERANT CONDENSING UNIT OR COMPRESSOR (IEC 60335-2-89:2010/A2:2015, MODIFIED) |
| I.S. EN 16740:2015 | EMISSION SAFETY OF COMBUSTIBLE AIR FRESHENERS - USER SAFETY INFORMATION |
| I.S. EN 50434:2014 | SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PARTICULAR REQUIREMENTS FOR MAINS OPERATED SHREDDERS AND CHIPPERS |
| I.S. EN IEC 62928:2018 | RAILWAY APPLICATIONS - ROLLING STOCK - ONBOARD LITHIUM-ION TRACTION BATTERIES |
| 17/30360253 DC : 0 | BS EN 15288-1 - SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN |
| I.S. EN IEC 61010-2-120:2018 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-120: PARTICULAR SAFETY REQUIREMENTS FOR MACHINERY ASPECTS OF EQUIPMENT |
| UNI EN 1672-1 : 2014 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
| UNE-EN 82079-1:2015 | Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailed requirements |
| I.S. EN 14033-1:2017 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING |
| EN 62477-1:2012/A1:2017 | SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL (IEC 62477-1:2012/A1:2016) |
| EN 60601-2-33:2010/A12:2016 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-33: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF MAGNETIC RESONANCE EQUIPMENT FOR MEDICAL DIAGNOSIS |
| DIN EN 203-2-7:2016-05 (Draft) | GAS HEATED CATERING EQUIPMENT - PART 2-7: SPECIFIC REQUIREMENTS - SALAMANDERS AND ROTISSERIES |
| UNE-EN 12312-4:2015 | Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges |
| BS EN 203-2-7:2014 | Gas heated catering equipment Specific requirements. Salamanders and rotisseries |
| EN 50570:2013/A1:2018 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS |
| DIN EN 15567-1:2015-08 | SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS |
| EN 62841-1:2015/AC:2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| EN 62282-5-1:2012 | FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-5-1:2012) |
| EN 50547:2013 | Railway applications - Batteries for auxiliary power supply systems |
| DIN EN 14033-1:2017-10 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING |
| EN 50628:2016 | Erection of electrical installations in underground mines |
| EN 50434:2014 | Safety of household and similar appliances - Particular requirements for mains operated shredders and chippers |
| ISO 17398:2004 | Safety colours and safety signs — Classification, performance and durability of safety signs |
| ISO 17724:2003 | Graphical symbols — Vocabulary |
| ISO 3864-2:2016 | Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels |
| BS ISO 9186-1:2014 | Graphical symbols. Test methods Method for testing comprehensibility |
| ISO 9186-1:2014 | Graphical symbols Test methods Part 1: Method for testing comprehensibility |
| ISO 9186-2:2008 | Graphical symbols — Test methods — Part 2: Method for testing perceptual quality |
| ISO 16069:2017 | Graphical symbols — Safety signs — Safety way guidance systems (SWGS) |
| ISO 3864-1:2011 | Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings |
| ISO 3864-3:2012 | Graphical symbols — Safety colours and safety signs — Part 3: Design principles for graphical symbols for use in safety signs |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| BS 5499-10:2014 | Guidance for the selection and use of safety signs and fire safety notices |
| ISO 20712-1:2008 | Water safety signs and beach safety flags Part 1: Specifications for water safety signs used in workplaces and public areas |
| ISO 3864-4:2011 | Graphical symbols Safety colours and safety signs Part 4: Colorimetric and photometric properties of safety sign materials |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.