• There are no items in your cart

ENV 1090-1 : DRAFT 1996

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

EXECUTION OF STEEL STRUCTURES - GENERAL RULES AND RULES FOR BUILDINGS
Superseded date

07-01-2008

Published date

01-12-2013

Contents
Foreword
Introduction
1. Scope
2. Normative References
3. Definitions
4. Documentation
    4.1 Project specification
    4.2 Constructor's documentation
5. Materials
    5.1 General
    5.2 Use of materials
    5.3 Welding consumables
    5.4 Mechanical fasteners
    5.5 Grouting materials
    5.6 Bolts with locking devices
    5.7 Shear connectors
6. Fabrication
    6.1 General
    6.2 Identification
    6.3 Handling and storage
    6.4 Cutting
    6.5 Shaping
    6.6 Holing
    6.7 Cut outs
    6.8 Full contact bearing surfaces
    6.9 Assembly
7. Welding
    7.1 General
    7.2 Welding plan
    7.3 Welding processes
    7.4 Welding approval
    7.5 Preparation and execution of welding
8. Mechanical Fastening
    8.1 General
    8.2 Hole sizes and positions
    8.3 Use of bolts
    8.4 Use of nuts
    8.5 Use of washers
    8.6 Tightening of non-preloaded bolts
    8.7 Tightening of preloaded bolts
    8.8 Contact surfaces in slip resistant connections
    8.9 Use of special fasteners and fastening methods
    8.10 Additional requirements for the use of special
         bolt types
    8.11 Riveting
9. Erection
    9.1 General
    9.2 Site conditions
    9.3 Erection method statement
    9.4 Supports
    9.5 Workmanship
10. Protective Treatment
    10.1 General
    10.2 Surface preparation
    10.3 Coating methods
    10.4 Special requirements
    10.5 Treatment of fasteners
11. Geometrical Tolerances
    11.1 General
    11.2 Fabrication tolerances
    11.3 Pre-erection tolerances
    11.4 Erection tolerances
12. Inspection, Testing and Corrections
    12.1 General
    12.2 Materials and fabricated products
    12.3 Fabrication
    12.4 Welding
    12.5 Mechanical fastening
    12.6 Protective treatment
    12.7 Erection
Annex A (normative)
Procedure Tests for Preloading Bolts and Determination
of Slip Factor
A.1 Test of bolt a assembly
A.2 Test of slip factor
A.3 Test of a bolt group in a connection assembly
A.4 Test of a method of tightening
A.5 Test of site equipment and site methodology
Annex B (normative)
Riveting
B.1 General
B.2 Hole sizes and positions
B.3 Rivets
B.4 Installation of rivets
B.5 Inspection and testing
Annex C (informative)
Project Specification
C.1 Checklist of information
Annex D (informative)
Classification of Fabricated Steel Components and Systems
for the Control of Conformity
D.1 Background Note
D.2 Classes of fabricated steel components
D.3 System of conformity control
D.4 Incorporation of fabricated steel components into
    a steel structure
Annex E (informative)
Guidelines for Welding Coordination
E.1 General
Annex F (informative)
Hexagon Injection Bolts
F.1 General
F.2 Hole sizes
F.3 Bolts
F.4 Washers
F.5 Nuts
F.6 Resin
F.7 Tightening
F.8 Installation
Annex G (informative)
Guidelines for Inspection and Test Plan
G.1 General
Annex H (informative)
Guidelines for Weld Imperfection Limits
H.1 General
H.2 Definitions and symbols
H.3 Evaluation of weld imperfections

Gives general requirements for execution of structural steelwork that is produced from hot rolled, hot finished, welded and cold formed steel products. Does not cover cold formed thin gauge members and sheeting.

Committee
TC 135
DocumentType
Draft
PublisherName
Comite Europeen de Normalisation
Status
Superseded

Standards Relationship
UNE-ENV 1090-1:1997 Identical
UNI ENV 1090-1 : 2001 Identical
NEN ENV 1090-1 : 1997 Identical
NF ENV 1090-1 : 96 FD Identical
DD ENV 1090-1:1998 Identical
NBN ENV 1090-1 : 1997 Identical
DIN V ENV 1090-1:1998-07 Identical
I.S. ENV 1090-1:1996 Identical

02/704463 DC : DRAFT MAR 2002 PREN 14399-4 - HIGH-STRENGTH STRUCTURAL BOLTING FOR PRELOADING - PART 4: SYSTEM HV - HEXAGON BOLT AND NUT ASSEMBLIES
EN 1709:2004 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PRECOMMISSIONING INSPECTION, MAINTENANCE, OPERATIONAL INSPECTION AND CHECKS
I.S. EN 1709:2004 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PRECOMMISSIONING INSPECTION, MAINTENANCE, OPERATIONAL INSPECTION AND CHECKS
02/704462 DC : DRAFT MAR 2002 PREN 14399-3 - HIGH-STRENGTH STRUCTURAL BOLTING FOR PRELOADING - PART 3: SYSTEM HR - HEXAGON BOLT AND NUT ASSEMBLIES
I.S. ENV 1993-1-4:1996 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS
DD ENV 1090-6:2001 Execution of steel structures Supplementary rules for stainless steel
I.S. ENV 1993-1-6:2000 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-6: GENERAL RULES - SUPPLEMENTARY RULES FOR THE SHELL STRUCTURES
02/704464 DC : DRAFT MAR 2002 PREN 14399-5 - HIGH-STRENGTH STRUCTURAL BOLTING FOR PRELOADING - PART 5: PLAIN WASHERS FOR SYSTEM HR
EN 13031-1:2001 GREENHOUSES: DESIGN AND CONSTRUCTION - PART 1: COMMERCIAL PRODUCTION GREENHOUSES
ONORM ENV 1090-4 : DRAFT 2004 EXECUTION OF STEEL STRUCTURES - PART 4: SUPPLEMENTARY RULES FOR HOLLOW SECTION STRUCTURES
02/704461 DC : DRAFT MAR 2002 PREN 14399-2 - HIGH-STRENGTH STRUCTURAL BOLTING FOR PRELOADING - PART 2: SUITABILITY TEST FOR PRELOADING
I.S. ENV 1994-2:1998 EUROCODE 4: DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 2: COMPOSITE BRIDGES
I.S. EN 13031-1:2002 GREENHOUSES: DESIGN AND CONSTRUCTION - PART 1: COMMERCIAL PRODUCTION GREENHOUSES
DD ENV 1090-4:2001 Execution of steel structures Supplementary rules for hollow section structures
02/704465 DC : DRAFT MAR 2002 PREN 14399-6 - HIGH-STRENGTH STRUCTURAL BOLTING FOR PRELOADING - PART 6: PLAIN CHAMFERED WASHERS FOR SYSTEMS HR AND HV
04/30123712 DC : DRAFT OCT 2004 EN 15048-2 - NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: SUITABILITY TEST
04/30123693 DC : DRAFT OCT 2004 EN 15048-1 - NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS
I.S. ENV 1993-2:1997 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 2: STEEL BRIDGES
DIN EN 13031-1:2003-09 GREENHOUSES - DESIGN AND CONSTRUCTION - PART 1: COMMERCIAL PRODUCTION GREENHOUSES
BS EN 13331-1:2002 Trench lining systems Product specifications
BS EN 13031-1:2001 Greenhouses. Design and construction Commercial production greenhouses
ENV 1993-2 : 1997 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 2: STEEL BRIDGES
I.S. ENV 1993-6:1999 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 6: CRANE SUPPORTING STRUCTURES
DIN EN 1709:2005-06 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PRECOMMISSIONING INSPECTION, MAINTENANCE, OPERATIONAL INSPECTION AND CHECKS
BS EN 1709:2004 Safety requirements for cableways for cableway installations designed to carry persons. Precommissioning inspection, maintenance and operational inspection and checks
EN 13331-1:2002 Trench lining systems - Part 1: Product specifications

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.