AS/NZS 60079.26:2007
|
Explosive atmospheres Equipment with equipment protection level (EPL) Ga
|
AS/NZS 60079.17:2009
|
Explosive atmospheres Electrical installations inspection and maintenance (IEC 60079-17, Ed.4.0 (2007) MOD)
|
AS/NZS 61241.10:2005
|
Electrical apparatus for use in the presence of combustible dust Classification of areas where combustible dusts are or may be present
|
AS/NZS 60079.2:2007
|
Explosive atmospheres Equipment protection by pressurized enclosure 'p'
|
AS/NZS 4871.4:2010
|
Electrical equipment for mines and quarries Mains powered electrical mobile machines
|
AS/NZS 1747:2003
|
Reeling, trailing and feeder cables used for mining - Repair, testing and fitting of accessories (Reconfirmed 2020)
|
AS/NZS 61241.2.3:2000
|
Electrical apparatus for use in the presence of combustible dust Test methods - Method for determining the minimum ignition energy of dust/air mixtures
|
AS/NZS 61241.1:2005
|
Electrical apparatus for use in the presence of combustible dust Protection by enclosures 'tD'
|
AS/NZS 60079.15:2006
|
Electrical apparatus for explosive gas atmospheres Construction, test and marking of type of protection, n electrical apparatus
|
AS/NZS 60079.11:2006
|
Explosive atmospheres Equipment protection by intrinsic safety 'i'
|
AS/NZS 60079.1.1:2002
|
Electrical apparatus for explosive gas atmospheres Flameproof enclosures 'd' - Method of test for ascertainment of maximum experimental safe gap
|
AS/NZS 4871.6:2007
|
Electrical equipment for coal mines, for use underground Diesel powered machinery and ancillary equipment
|
AS/NZS 60079.7:2006
|
Explosive atmospheres Equipment protection by increased safety 'e'
|
AS/NZS 60079.6:2007
|
Explosive atmospheres Equipment protection by oil immersion 'o'
|
AS/NZS 4871.1:2010
|
Electrical equipment for mines and quarries General requirements
|
AS/NZS 61241.4:2002
|
Electrical apparatus for use in the presence of combustible dust Type of protection 'pD'
|
AS/NZS 4871.5:2010
|
Electrical equipment for mines and quarries Battery powered electrical mobile machines
|
AS/NZS 2802:2000
|
Electric cables - Reeling and trailing - For mining and general use (other than underground coal mining) (Reconfirmed 2020)
|
AS/NZS 2081.5:2002
|
Electrical equipment for coal and shale mines - Electrical protection devices - Earth-fault current limiters
|
AS/NZS 2081.2:2002
|
Electrical equipment for coal and shale mines - Electrical protection devices - Earth-continuity monitoring devices
|
AS/NZS 60079.20:2000
|
Electrical apparatus for explosive gas atmospheres Data for flammable gases and vapours, relating to the use of electrical apparatus
|
AS/NZS 61241.18:2005
|
Electrical apparatus for use in the presence of combustible dust Protection by encapsulation 'mD'
|
AS/NZS 60079.18:2011
|
Explosive atmospheres Equipment protection by encapsulation 'm'
|
AS/NZS 3800:2005
|
Electrical equipment for explosive atmospheres - Repair and overhaul
|
AS/NZS 2081.1:2002
|
Electrical equipment for coal and shale mines - Electrical protection devices - General requirements
|
AS/NZS 2381.1:2005
|
Electrical equipment for explosive gas atmospheres - Selection, installation and maintenance - General requirements
|
AS/NZS ISO 9001:2008
|
Quality management systems - Requirements
|
AS/NZS 60079.30.1:2007
|
Explosive atmospheres Electrical resistance trace heating - General and testing requirements
|
AS/NZS 60079.5:2007
|
Explosive atmospheres Equipment protection by powdered filling 'q'
|
AS/NZS 1299:2009
|
Electrical equipment for mines and quarries - Explosion-protected three-phase restrained plugs and receptacles for working voltages up to and including 3.3 kV (Reconfirmed 2020)
|
AS/NZS 1300:2009
|
Electrical equipment for mines and quarries - Bolted explosion-protected three-phase cable coupling devices (Reconfirmed 2020)
|
AS/NZS 1802:2003
|
Electric cables - Reeling and trailing - For underground coal mining purposes
|
AS/NZS 4871.3:2010
|
Electrical equipment for mines and quarries Substations
|
AS/NZS 60079.27:2008
|
Explosive atmospheres Fieldbus intrinsically safe concept (FISCO)
|
AS/NZS 60079.0:2008
|
Explosive atmospheres Equipment - General requirements
|
AS 60529-2004
|
Degrees of protection provided by enclosures (IP Code) (Reconfirmed 2018)
|
AS/NZS 60079.29.2:2008
|
Explosive atmospheres Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
|
AS/NZS 60079.29.4:2011
|
Explosive atmospheres Gas detectors - Performance requirements of open path detectors for flammable gases (Reconfirmed 2022)
|
AS/NZS 60079.28:2007
|
Explosive atmospheres Protection of equipment and transmission systems using optical radiation
|
AS/NZS 2081.4:2002
|
Electrical equipment for coal and shale mines - Electrical protection devices - Lockout earth-fault protection devices
|
AS/NZS 60079.30.2:2007
|
Explosive atmospheres Electrical resistance trace heating - Application guide for design, installation and maintenance (IEC 60079-30-2, Ed. 1.0 (2007) MOD)
|
AS/NZS 61241.0:2005
|
Electrical apparatus for use in the presence of combustible dust General requirements
|
AS/NZS 1972:2006
|
Electric cables - Underground coal mines - Other than reeling and trailing (Reconfirmed 2020)
|
AS/NZS 60079.12:2000
|
Electrical apparatus for explosive gas atmospheres Classification of mixtures of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents
|
AS/NZS 60079.10.1:2009
|
Explosive atmospheres Classification of areas - Explosive gas atmospheres (IEC 60079-10-1, Ed.1.0(2008) MOD)
|
AS/NZS 62013.1:2001
|
Caplights for use in mines susceptible to firedamp General requirements - Construction and testing in relation to the risk of explosion
|
AS/NZS 61241.11:2006
|
Electrical apparatus for use in the presence of combustible dust Protection by intrinsic safety iD
|
AS/NZS 62013.2:2001
|
Caplights for use in mines susceptible to firedamp Performance and other safety-related matters
|
AS/NZS 60079.25:2011
|
Explosive atmospheres Intrinsically safe electrical systems
|
AS/NZS 61241.14:2005
|
Electrical apparatus for use in the presence of combustible dust Selection and installation (IEC 61241-14, Ed.1.0(2004) MOD)
|
AS/NZS 60079.14:2009
|
Explosive atmospheres Electrical installations design, selection and erection (IEC 60079-14, Ed. 4.0 (2007) MOD)
|
AS/NZS 2290.1:2005
|
Electrical equipment for coal mines - Introduction and maintenance - For hazardous areas
|
AS/NZS 60079.4:2000
|
Electrical apparatus for explosive gas atmospheres Method of test for ignition temperature
|
AS/NZS 4761.2:2008
|
Competencies for working with electrical equipment for hazardous areas (EEHA) Guide to assessing competency
|
AS/NZS 2081.3:2002
|
Electrical equipment for coal and shale mines - Electrical protection devices - Earth-leakage protection systems for use on earth-fault current limited systems (IT systems)
|
AS/NZS 4761.1:2008
|
Competencies for working with electrical equipment for hazardous areas (EEHA) Competency Standards
|
AS/NZS 60079.1:2007
|
Explosive atmospheres Equipment protection by flameproof enclosures 'd'
|
AS/NZS 61241.2.1:2000
|
Electrical apparatus for use in the presence of combustible dust Test methods - Methods for determining the minimum ignition temperature of dust
|
AS/NZS 60079.29.1:2008
|
Explosive atmospheres Gas detectors - Performance requirements of detectors for flammable gases
|
AS/NZS 61241.2.2:2000
|
Electrical apparatus for use in the presence of combustible dust Test methods - Method for determining the electrical resistivity of dust in layers
|
AS/NZS 4871.2:2010
|
Electrical equipment for mines and quarries Distribution, control and auxiliary equipment
|
AS/NZS 2381.2:2006
|
Electrical equipment for explosive atmospheres - Selection, installation and maintenance Flameproof enclosure d
|