• There are no items in your cart

I.S. EN 13718-1:2014

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES
Available format(s)

Hardcopy , PDF

Superseded date

04-25-2020

Language(s)

English

Published date

01-01-2014

Preview

For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.

Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements for medical devices for air ambulances
5 Test methods
Annex ZA (informative) - Relationship between this European
         Standard and the Essential Requirements of EU
         Directive 93/42/EEC Medical Devices
Bibliography

Describes general requirements for medical devices carried in air ambulances and used therein and outside hospitals and clinics in situations where the ambient conditions can differ from normal indoor conditions.

DocumentType
Standard
Pages
20
PublisherName
National Standards Authority of Ireland
Status
Superseded
SupersededBy
Supersedes

EN ISO 11197:2016 Medical supply units (ISO 11197:2016)
EN ISO 407:2004 Small medical gas cylinders - Pin-index yoke-type valve connections (ISO 407:2004)
MIL-STD-704 Revision F:2004 AIRCRAFT ELECTRIC POWER CHARACTERISTICS
EN 1865-1:2010+A1:2015 Patient handling equipment used in road ambulances - Part 1: General stretcher systems and patient handling equipment
IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION) ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST
ISO 15002:2008 Flow-metering devices for connection to terminal units of medical gas pipeline systems
EN ISO 19054:2006/A1:2016 RAIL SYSTEMS FOR SUPPORTING MEDICAL EQUIPMENT (ISO 19054:2005/AMD 1:2016)
ISO 7637-1:2015 Road vehicles — Electrical disturbances from conduction and coupling — Part 1: Definitions and general considerations
MIL-DTL-26482 Revision H:2007 Connectors, Electrical, Circular, Miniature, Quick Disconnect, Environment Resisting, Receptacles and Plugs, General Specification for
EN ISO 10524-3:2006/A1:2013 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES (ISO 10524-3:2005/AMD 1:2013)
MIL-STD-810 Revision G:2008 ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
IEC 60601-1:2005+AMD1:2012 CSV Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
EN ISO 15002:2008 Flow-metering devices for connection to terminal units of medical gas pipeline systems (ISO 15002:2008)
ISO 10524-4:2008 Pressure regulators for use with medical gases — Part 4: Low-pressure regulators
ISO 7637-2:2011 Road vehicles Electrical disturbances from conduction and coupling Part 2: Electrical transient conduction along supply lines only
IEC 60601-1-6:2010+AMD1:2013 CSV Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability
EN 1005-2:2003+A1:2008 Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery
EN 1865-4:2012 Patient handling equipment used in road ambulances - Part 4: Foldable patient transfer chair
ISO 9170-2:2008 Terminal units for medical gas pipeline systems — Part 2: Terminal units for anaesthetic gas scavenging systems
ISO 19054:2005 Rail systems for supporting medical equipment
EN 60068-2-64:2008 ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE
EN 1865-2:2010+A1:2015 (edition 2) Patient handling equipment used in road ambulances - Part 2: Power assisted stretcher
EN 60601-1-6:2010/A1:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 1-6: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: USABILITY (IEC 60601-1-6:2010/A1:2013)
EN ISO 10524-4:2008 Pressure regulators for use with medical gases - Part 4: Low-pressure regulators (ISO 10524-4:2008)
EN 61000-4-2:2009 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
RTCA DO 199 VOL II : 1988 Potential Interference to Aircraft Electronic Equipment from Devices Carried Aboard (Vol II)
IEC 60068-2-31:2008 Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens
ISO 7396-2:2007 Medical gas pipeline systems Part 2: Anaesthetic gas scavenging disposal systems
IEC 60068-2-64:2008 Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance
IEC 62366:2007+AMD1:2014 CSV Medical devices - Application of usability engineering to medical devices
IEC 61000-4-6 : 4.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS
EN 61000-4-3 : 2006 AMD 2 2010 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST
ISO 10297:2014 Gas cylinders — Cylinder valves — Specification and type testing
ISO 5359:2014 Anaesthetic and respiratory equipment Low-pressure hose assemblies for use with medical gases
EN 1041:2008+A1:2013 Information supplied by the manufacturer of medical devices
ISO 10524-3:2005 Pressure regulators for use with medical gases Part 3: Pressure regulators integrated with cylinder valves
ISO 11197:2016 Medical supply units
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
MIL-STD-461 Revision G:2015 REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT
EN 13976-2:2011 Rescue systems - Transportation of incubators - Part 2: System requirements
IEC 61000-4-2:2008 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
RTCA DO 199 VOL I : 1988 Potential Interference to Aircraft Electronic Equipment from Devices Carried Aboard (Vol I)
EN 62366 : 2008 AMD 1 2015 MEDICAL DEVICES - APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES (IEC 62366:2007/A1:2014)
EN 1865-3:2012+A1:2015 (edition 2) Patient handling equipment used in road ambulances - Part 3: Heavy duty stretcher
EN ISO 14971:2012 Medical devices - Application of risk management to medical devices (ISO 14971:2007, Corrected version 2007-10-01)
EN 60068-2-29:1993 Environmental testing - Part 2: Tests - Test Eb and guidance: Bump
ISO 407:2004 Small medical gas cylinders Pin-index yoke-type valve connections
EN 60068-2-6:2008 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
EN ISO 10297:2014/A1:2017 GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING (ISO 10297:2014/AMD 1:2017)
EN ISO 9170-2:2008 Terminal units for medical gas pipeline systems - Part 2: Terminal units for anaesthetic gas scavenging systems (ISO 9170-2:2008)
EN 1789:2007+A2:2014 Medical vehicles and their equipment - Road ambulances
EN 61000-4-4:2012 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST (IEC 61000-4-4:2012)
CISPR 11:2015 RLV Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
IEC 60068-2-29:1987 Environmental testing. Part 2: Tests. Test Eb and guidance: Bump
EN ISO 7396-2:2007 Medical gas pipeline systems - Part 2: Anaesthetic gas scavenging disposal systems (ISO 7396-2:2007)
EN 61000-4-6:2014/AC:2015 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS (IEC 61000-4-6:2013)
ISO 14971:2007 Medical devices Application of risk management to medical devices
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
ISO 7000:2014 Graphical symbols for use on equipment Registered symbols
EN ISO 10524-2:2006 Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators (ISO 10524-2:2005)
EN 13976-1:2011 Rescue systems - Transportation of incubators - Part 1: Interface conditions
EN ISO 10524-1:2006 Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2006)
ISO 10524-1:2006 Pressure regulators for use with medical gases Part 1: Pressure regulators and pressure regulators with flow-metering devices
IEC 60309-1:1999+AMD1:2005+AMD2:2012 CSV Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
ISO 15223-1:2016 Medical devices Symbols to be used with medical device labels, labelling and information to be supplied Part 1: General requirements
EN 60309-2:1999/A2:2012 PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 2: DIMENSIONAL INTERCHANGEABILITY REQUIREMENTS FOR PIN AND CONTACT-TUBE ACCESSORIES (IEC 60309-2:1999/A2:2012)
IEC 60309-2:1999+AMD1:2005+AMD2:2012 CSV Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
EN 1865-5:2012 Patient handling equipment used in road ambulances - Part 5: Stretcher support
ISO 10524-2:2005 Pressure regulators for use with medical gases Part 2: Manifold and line pressure regulators
EN 60068-2-31:2008 ENVIRONMENTAL TESTING - PART 2-31: TESTS - TEST EC: ROUGH HANDLING SHOCKS, PRIMARILY FOR EQUIPMENT-TYPE SPECIMENS
EN 60309-1:1999/A1:2007/AC:2014 PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS (IEC 60309-1:1999/A2:2012)
EN 13718-2:2015 Medical vehicles and their equipment - Air ambulances - Part 2: Operational and technical requirements for air ambulances

View more information
US$36.18
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.