• There are no items in your cart

I.S. EN 14214:2012

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS
Available format(s)

Hardcopy , PDF

Superseded date

02-01-2020

Published date

09-19-2012

Preview

For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.

Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

Foreword
Introduction
1? Scope
2? Normative references
3 Sampling
4? Pump marking
5? Requirements and test methods
Annex A (normative) Details of interlaboratory test programme
Annex B (normative) Correction factor for calculation of density of FAME
Annex C (informative) Background information for national climate grades selection
Bibliography

This European Standard specifies requirements and test methods for marketed and delivered fatty acid methyl esters (hereafter known as FAME) to be used either as fuel for diesel engines and for heating applications at 100 % concentration, or as an extender for distillate fuel for diesel engines in accordance with the requirements of EN 590 and for heating fuel.

Committee
CEN/TC 19
DevelopmentNote
Supersedes I.S. EN 14213. (09/2012) 2012 Edition Re-Issued in February 2014 & incorporates AMD 1 2014. (02/2014)
DocumentType
Test Method
Pages
24
ProductNote
THIS STANDARD IDENTICAL TO EN 14214:2012 THIS STANDARD ALSO REFERS TO EN 116:1997,EN 590,EN 12662:2008,EN 14112:2003,EN 15751:2009,EN 15779:2009,FprEN 16294:2011,EN ISO 2719:2002,EN ISO 3679:2004,EN ISO 5165:1998,CEN/TR 15367-1,
PublisherName
National Standards Authority of Ireland
Status
Superseded
SupersededBy
Supersedes

I.S. 251:2012 GAS OIL - REQUIREMENTS AND TEST METHODS

ISO 3171:1988 Petroleum liquids — Automatic pipeline sampling
ISO 2719:2016 Determination of flash point Pensky-Martens closed cup method
EN 14104:2003 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF ACID VALUE
ISO 13759:1996 Petroleum products — Determination of alkyl nitrate in diesel fuels — Spectrometric method
ISO 12937:2000 Petroleum products — Determination of water — Coulometric Karl Fischer titration method
ISO 3170:2004 Petroleum liquids — Manual sampling
ISO 3675:1998 Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method
EN ISO 3104:1996 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994)
ISO 3987:2010 Petroleum products — Determination of sulfated ash in lubricating oils and additives
EN 15779:2009+A1:2013 Petroleum products and fat and oil derivates - Fatty acid methyl esters (FAME) for diesel engines - Determination of polyunsaturated (≥4 double bonds) fatty acid methyl esters (PUFA) by gas chromatography
ISO 5165:1998 Petroleum products Determination of the ignition quality of diesel fuels Cetane engine method
EN 116:2015 Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method
EN 14103:2011 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of ester and linolenic acid methyl ester contents
EN ISO 12185:1996 Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996)
EN 16300:2012 Automotive fuels - Determination of iodine value in fatty acid methyl esters (FAME) - Calculation method from gas chromatographic data
EN 14112:2016 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of oxidation stability (accelerated oxidation test)
PREN 15751 : DRAFT 2012 AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD
EN 16294:2012 Petroleum products and fat and oil derivatives - Determination of phosphorus content in fatty acid methyl esters (FAME) - Optical emission spectral analysis with inductively coupled plasma (ICP OES)
ISO 2160:1998 Petroleum products Corrosiveness to copper Copper strip test
CEN/TR 15160:2005 Petroleum and related products - Applicability of diesel fuel test methods for Fatty Acid Methyl Esters (FAME) - Information and results on round robin tests
EN ISO 3675:1998 Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998)
EN 16091:2011 Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Determination of oxidation stability by rapid small scale oxidation method
EN ISO 13032:2012 Petroleum products - Determination of low concentration of sulfur in automotive fuels - Energy-dispersive X-ray fluorescence spectrometric method (ISO 13032:2012)
ISO 3679:2015 Determination of flash no-flash and flash point — Rapid equilibrium closed cup method
EN 14106:2003 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of free glycerol content
EN 14331:2004 Liquid petroleum products - Separation and characterisation of fatty acid methyl esters (FAME) from middle distillates - Liquid chromatography (LC)/gas chromatography (GC) method
DIN 51900-2:2003-05 Determining the gross calorific value of solid and liquid fuels using the isoperibol or static jacket calorimeter and calculation of net calorific value
EN 14105:2011 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of free and total glycerol and mono-, di-, triglyceride contents
CEN/TR 15367-1:2014 PETROLEUM PRODUCTS - GUIDELINES FOR GOOD HOUSEKEEPING - PART 1: AUTOMOTIVE DIESEL FUELS
ISO 12185:1996 Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method
EN 14108:2003 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of sodium content by atomic absorption spectrometry
ISO 20884:2011 Petroleum products Determination of sulfur content of automotive fuels Wavelength-dispersive X-ray fluorescence spectrometry
EN 14107:2003 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of phosphorus content by inductively coupled plasma (ICP) emission spectrometry
EN 16329:2013 Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method
EN 14538:2006 Fat and oil derivatives - Fatty acid methyl ester (FAME) - Determination of Ca, K, Mg and Na content by optical emission spectral analysis with inductively coupled plasma (ICP OES)
ISO 4259:2006 Petroleum products Determination and application of precision data in relation to methods of test
DIN 51900-3:2005-01 Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value - Part 3: Method using adiabatic jacket
EN 12662:2014 Liquid petroleum products - Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters
EN ISO 12937:2000 Petroleum products - Determination of water - Coulometric Karl Fischer titration method (ISO 12937:2000)
EN 23015:1994 Petroleum products - Determination of cloud point (ISO 3015:1992)
EN 14109:2003 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of potassium content by atomic absorption spectrometry
EN ISO 2719:2016 Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016)
EN ISO 13759:1996 Petroleum products - Determination of alkyl nitrate in diesel fuels - Spectrometric method (ISO 13759:1996)
EN ISO 3679:2015 Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015)
ISO 20846:2011 Petroleum products Determination of sulfur content of automotive fuels Ultraviolet fluorescence method
EN ISO 20884:2011 Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 20884:2011)
EN ISO 2160:1998 Petroleum products - Corrosiveness to copper - Copper strip test (ISO 2160:1998)
EN 14111:2003 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of iodine value
EN ISO 20846:2011 Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method (ISO 20846:2011)
ISO 13032:2012 Petroleum products Determination of low concentration of sulfur in automotive fuels Energy-dispersive X-ray fluorescence spectrometric method
EN ISO 3170:2004 Petroleum liquids - Manual sampling (ISO 3170:2004)
EN ISO 3171:1999 Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988)
EN 14110:2003 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF METHANOL CONTENT
ISO 3015:1992 Petroleum products — Determination of cloud point
EN ISO 4259:2006 Petroleum products - Determination and application of precision data in relation to methods of test (ISO 4259:2006)

View more information
US$48.23
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.