I.S. EN 4632-005:2009
Current
Current
The latest, up-to-date edition.
AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 005: HOMOGENEOUS ASSEMBLIES OF HEAT RESISTING NI OR CO BASE ALLOYS
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2009
Publisher
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 Use of this standard
5 Updating this standard
6 List of heat resisting Ni or Co base alloys
7 Heat resisting Ni or Co base alloys
Describes degrees of weldability and brazeability for materials or families of materials used in the aerospace industry.
| DocumentType |
Standard
|
| Pages |
46
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| EN 4632-005:2009 | Identical |
| AWS A5.14/A5.14M : 2011 | SPECIFICATION FOR NICKEL AND NICKEL-ALLOY BARE WELDING ELECTRODES AND RODS |
| SAE AMS 5402 : 2004 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, INVESTMENT CASTINGS 62NI - 21.5CR - 9.0MO - 3.6CB (NB) AS CAST |
| PREN 2959 : 200P2 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH1302 (NICR20CO13MO4TI3AL) - SOLUTION TREATED AND COLD WORKED - BAR FOR FORGED FASTENERS - 3 MM <= D <= 30 MM |
| SAE AMS 5390 : 2014 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, INVESTMENT CASTINGS, 47.5NI - 22CR - 1.5CO - 9MO - 0.60W - 18.5FE (N-12MV) AS-CAST |
| EN 4327:2001 | Aerospace series - Heat resisting alloy CO-WH1401 (CoCr26Ni11W8) - Filler metal for welding - Wire and rod |
| PREN 2659 : 200P2 | AEROSPACE SERIES - HEAT RESISTING ALLOY CO-PH1402 - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED - FORGINGS - D[E] <= 100 MM - R[M] >= 860 MPA |
| PREN 2203 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH1303 (NICO20CR20MO5TI2AL) - SOLUTION TREATED - SHEET, STRIP AND PLATE - 0,2 MM <= A <= 10 MM |
| PREN 2403 : 200P1 | AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NI-CH2601 (NICR19FE19NB5MO3) - VACUUM MELTED - SOLUTION TREATED AND PRECIPITATION TREATED - PRECISION CASTING - A OR D <= 50 MM |
| PREN 4095 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY - NI-CH1305 (NICR16CO10MO8A14TI4) - VACUUM MELTED - NON HEAT TREATED - PRECISION CASTINGS |
| PREN 2405 : 200P1 | AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (NICR19FE19NB5MO3) - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - D[E] <= 200 MM |
| EN 3671 : 2007 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3601 (NICR22MO9NB) - NON HEAT TREATED - FORGING STOCK - A OR D <= 250 MM |
| PREN 2185 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2301 (NICR21FE18MO9) - SOLUTION TREATED - SHEET, STRIP AND PLATE - 0,2 MM <= A <= 10 MM |
| PREN 2661 : 200P2 | AEROSPACE SERIES - HEAT RESISTING ALLOY CO-PH1402 - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED - SHEET AND STRIP - A <= 3 MM - R[M] >= 860 MPA |
| EN 4632-001:2008 | Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 001: General requirements |
| EN 3668:2006 | Aerospace series - Heat resisting alloy NI-PH2301 (NiCr21Fe18Mo9) - Non heat treated - Forging stock - a or D ≤ 250 mm |
| PREN 2204 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-CH1303 (NICO20CR20MO5TI2AL) - VACUUM MELTED - SOLUTION TREATED AND PRECIPITATION TREATED - PRECISION CASTING - D[E] <= 50 MM |
| EN 3884:2001 | Aerospace series - Heat resisting alloy NI-WH2601 (NiCr19Nb5Mo3Ti) - Filler metal for welding |
| PREN 2663 : 200P2 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3601 (NICR22MO9NB) - SOLUTION TREATED - SHEET, STRIP AND PLATE - 0,2 MM <= A <= 10 MM |
| PREN 2407 : 200P1 | AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (NICR19FE19NB5MO3) - SOLUTION TREATED AND PRECIPITATION TREATED - SHEET, STRIP AND PLATE - 0,2 MM <= A <= 10 MM |
| EN 4384:2007 | Aerospace series - Heat resisting alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al) - Non heat treated - Remelting stock |
| PREN 4376 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2601 (NICR19FE19NB5MO3) - SOLUTION TREATED AND PRECIPITATION TREATED - BAR AND SECTION - D[E] <= 200 MM |
| EN ISO 4063:2010 | Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01) |
| EN 4382:2006 | Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Solution treated - Seamless tubes - For hydraulic application - D ≤ 50 mm, a ≤ 3 mm |
| SAE AMS 5399 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, INVESTMENT CASTINGS, 52NI - 19CR - 11CO - 9.8MO - 3.2TI - 1.6AL - 0.006B, VACUUM-MELTED, VACUUM-CAST, SOLUTION HEAT TREATED |
| EN 4329:2001 | Aerospace series - Heat resisting alloy NI-WH0001 (NiCr20) - Filler metal for welding - Wire and rod |
| PREN 2199 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH1303 (NICO20CR20MO5TI2AL) - SOLUTION TREATED AND PRECIPITATION TREATED - BAR AND SECTION - D[E] <= 200 MM |
| SAE AMS 5540 : 2011 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 74NI - 15.5CR - 8.0FE, ANNEALED |
| ISO 18274:2010 | Welding consumables — Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys — Classification |
| PREN 4567 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY CO-PH4101 (COCR20W15NI) - VACUUM MELTED - SOLUTION TREATED - BAR AND SECTION - A OR D <= 100 MM |
| PREN 2184 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2301 (NICR21FE18MO9) - SOLUTION TREATED - BAR AND SECTION - D[E] <= 200 MM |
| PREN 2183 : 200P2 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2301 (NICR21FE18MO9) - SOLUTION TREATED - FORGINGS - D[E] <= 200 MM |
| EN ISO 18274:2010 | Welding consumables - Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys - Classification (ISO 18274:2010) |
| EN 10095:1999 | Heat resisting steels and nickel alloys |
| AWS A5.8/A5.8M : 2013 | SPECIFICATION FOR FILLER METALS FOR BRAZING AND BRAZE WELDING |
| PREN 2657 : 200P2 | AEROSPACE SERIES - HEAT RESISTING ALLOY CO-PH1402 - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED - BAR - A OR D <= 150 MM - R[M] >= 860 MPA |
| PREN 4380 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3601 (NICR22MO9NB) - SOLUTION TREATED - BAR AND SECTION - D[E] <= 200 MM |
| PREN 4222 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH1305 (NICR22CO13MO9AI1) - AIR MELTED AND VACUUM REFINED - ANNEALED - SHEET AND STRIP - 0,25 MM <= A <= 3 MM |
| PREN 4377 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2601 (NICR19FE19NB5MO3) - NON HEAT TREATED - FORGING STOCK - A OR D <= 300 MM |
| EN 3888:2001 | Aerospace series - Heat resisting alloy CO-WH1402 (CoCr22Ni22W15) - Filler metal for welding |
| ISO 9722:1992 | Nickel and nickel alloys Composition and forms of wrought products |
| PREN 4569 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY CO-PH4101 (COCR20W15NI) - VACUUM MELTED - SOLUTION TREATED - WIRE - D <= 4 MM |
| EN 3887:2001 | Aerospace series - Heat resisting alloy CO-WH4101 (CoCr20W15Ni) - Filler metal for welding |
| PREN 4568 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY CO-PH4101 (COCR20W15NI) - VACUUM MELTED - SOLUTION TREATED - SHEET AND STRIP - A <= 6 MM |
| EN 4632-002:2008 | Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 002: Homogeneous assemblies aluminium and aluminium alloys |
| PREN 4566 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY CO-PH4101 (COCR20W15NI) - VACUUM MELTED - SOLUTION TREATED - FORGINGS - D[E] <= 100 MM |
| ISO 4063:2009 | Welding and allied processes — Nomenclature of processes and reference numbers |
| EN 4379:2007 | Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Solution treated, forging De ≤ 200 mm |
| SAE AMS 5687 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WIRE, 74NI - 15.5CR - 8.0FE, ANNEALED |
| SAE AMS 5665 : 2012 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS, 74NI - 15.5CR - 8.0FE |
| PREN 2161 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY CO-CH1401 (COCR26NI11W) NOT HEAT TREATED - PRECISION CASTINGS |
| PREN 2662 : 200P2 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3601 (NICR22MO9NB) - ANNEALED - SHEET, STRIP AND PLATE - 0,2 MM <= A <= 10 MM |
| PREN 4381 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3601 (NICR22MO9NB) - SOLUTION TREATED - SEAMLESS TUBES - FOR STRUCTURAL APPLICATION - D <= 50 MM, A <= 3 MM |
| PREN 2658 : 200P2 | AEROSPACE SERIES - HEAT RESISTING ALLOY CO-PH1402 - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED - AS FORGED - FORGING STOCK - D[E] <= 360 MM |
| SAE AMS 5580 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING 74NI - 15.5CR - 8.0FE, ANNEALED |
US$87.70
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.