• There are no items in your cart

I.S. EN 60122-1:2002 AMD 1 2018

Current
Current

The latest, up-to-date edition.

QUARTZ CRYSTAL UNITS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
Published date

04-24-2018

For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.

Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

National foreword
FOREWORD
1 General
2 Terminology and general requirements
3 Quality assessment procedures
4 Test and measurement procedures
Bibliography
Annex A (normative) - Procedure for the determination
        of the fitting parameters for the frequency aging
Annex ZA (normative) - Normative references to
         international publications with their
         corresponding European publications

Gives the methods of test and general requirements for quartz crystal units of assessed quality using either capability approval or qualification approval procedures.

DevelopmentNote
For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (04/2018)
DocumentType
Standard
PublisherName
National Standards Authority of Ireland
Status
Current

Standards Relationship
IEC 60122-1:2002 Identical

EN 60444-4:1997 Measurement of quartz crystal unit parameters by zero phase technique in a pi-network - Part 4: Method for the measurement of the load resonance frequency fL, load resonance resistance RL and the calculation of other derived values of quartz crystal units, up to 30 MHz
IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
IEC 60068-2-58:2015+AMD1:2017 CSV Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)
IEC 60068-2-27:2008 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
IEC 60068-2-20:2008 Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads
IEC 60122-3:2010 Quartz crystal units of assessed quality - Part 3: Standard outlines and lead connections
IECQ 001002-3:2005 IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ) - RULES OF PROCEDURE - PART 3: APPROVAL PROCEDURES
IEC 60068-2-21:2006 Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices
IEC 60068-2-13:1983 Basic environmental testing procedures - Part 2-13: Tests - Test M: Low air pressure
EN 60444-2:1997 Measurement of quartz crystal unit parameters by zero phase technique in a pi-network - Part 2: Phase offset method for measurement of motional capacitance of quartz crystal units
IEC 60444-5:1995 Measurement of quartz crystal units parameters - Part 5: Methods for the determination of equivalent electrical parameters using automatic network analyzer techniques and error correction
IEC 60444-2:1980 Measurement of quartz crystal unit parameters by zero phase technique in a pi-network. Part 2: Phase offset method for measurement of motional capacitance of quartz crystal units
IEC 61178-3:1993 Quartz crystal units - A specification in the IEC Quality Assessment System for Electronic Components (IECQ) - Part 3: Sectional specification - Qualification approval
EN 61760-1:2006 SURFACE MOUNTING TECHNOLOGY - PART 1: STANDARD METHOD FOR THE SPECIFICATION OF SURFACE MOUNTING COMPONENTS (SMDS)
IEC 61760-1:2006 Surface mounting technology - Part 1: Standard method for the specification of surface mounting components (SMDs)
IECQ 001002-2:1998 IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ) - RULES OF PROCEDURE - PART 2: DOCUMENTATION
IEC 60444-6:2013 Measurement of quartz crystal unit parameters - Part 6: Measurement of drive level dependence (DLD)
EN 60068-2-7:1993 Environmental testing - Part 2: Tests - Test Ga: Acceleration, steady state
IEC 60068-2-64:2008 Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance
EN 60444-1:1997/A1:1999 MEASUREMENT OF QUARTZ CRYSTAL UNIT PARAMETERS BY ZERO PHASE TECHNIQUE IN A PI-NETWORK - PART 1: BASIC METHOD FOR THE MEASUREMENT OF RESONANCE FREQUENCY AND RESONANCE RESISTANCE OF QUARTZ CRYSTAL UNITS BY ZERO PHASE TECHNIQUE IN A PI-NETWORK
IEC TR 60444-4:1988 Measurement of quartz crystal unit parameters by zero phase technique in a pi-network. Part 4: Method for the measurement of the load resonance frequency fL, load resonance resistance RL and the calculation of other derived values of quartz crystal units, up to 30 MHz
IEC 60410:1973 Sampling plans and procedures for inspection by attributes
IEC 60068-2-3:1969 Basic environmental testing procedures - Part 2-3: Tests - Test Ca: Damp heat, steady state
IEC GUIDE 102:1996 Electronic components - Specification structures for qualityassessment (Qualification approval and capability approval)
EN 60068-2-17:1994 Environmental testing - Part 2: Tests - Test Q: Sealing
IEC 60068-2-17:1994 Basic environmental testing procedures - Part 2-17: Tests - Test Q: Sealing
IEC 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
IECQ 001002-1:1998 IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ) - RULES OF PROCEDURE - PART 1: ADMINISTRATION
EN 60068-2-13:1999 Environmental testing - Part 2: Tests - Test M: Low air pressure
IEC 60050-561:2014 International Electrotechnical Vocabulary (IEV) - Part 561: Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection
IEC 60068-2-29:1987 Environmental testing. Part 2: Tests. Test Eb and guidance: Bump
IEC 61178-2:1993 Quartz crystal units - A specification in the IEC Quality Assessment System for Electronic Components (IECQ) - Part 2: Sectional specification - Capability approval
EN 60444-5:1997 Measurement of quartz crystal unit parameters - Part 5: Methods for the determination of equivalent electrical parameters using automatic network analyzer techniques and error correction
IEC 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
IEC 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
EN 60068-2-45:1992/A1:1993 Environmental testing - Part 2: Tests - Test Xa and guidance: Immersion in cleaning solvents
IEC 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.