• There are no items in your cart

I.S. EN 61442:2005

Current
Current

The latest, up-to-date edition.

TEST METHODS FOR ACCESSORIES FOR POWER CABLES WITH RATED VOLTAGES FROM 6 KV (U[M] = 7,2 KV) UP TO 36 KV (U[M] = 42 KV)
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2005

Preview

For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.

Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

FOREWORD
1 Scope
2 Normative references
3 Test installations and conditions
4 AC voltage tests
   4.1 Dry test for all accessories
   4.2 Wet test for outdoor terminations
   4.3 Test in water for stop ends
5 DC voltage tests
   5.1 Installation
   5.2 Method
6 Impulse voltage tests
   6.1 Installation
   6.2 Method
   6.3 Test at elevated temperature
7 Partial discharge test
   7.1 Method
   7.2 Test at elevated temperature
8 Tests at elevated temperature
   8.1 Installation and connection
   8.2 Measurement of temperature
9 Heating cycles voltage test
   9.1 Installation
   9.2 Test in air
   9.3 Test in water
   9.4 Immersion test for outdoor terminations
10 Thermal short-circuit test (screen)
   10.1 Installation
   10.2 Method
11 Thermal short-circuit test (conductor)
   11.1 Installation
   11.2 Method
12 Dynamic short-circuit test
   12.1 Installation
   12.2 Method
13 Humidity and salt fog tests
   13.1 Apparatus
   13.2 Installation
   13.3 Method
14 Impact test at ambient temperature
15 Screen resistance measurement
   15.1 Installation
   15.2 Method
16 Screen leakage current measurement
   16.1 Installation
   16.2 Method
17 Screen fault current initiation test
   17.1 Installation
   17.2 Method
18 Operating force test
   18.1 Installation
   18.2 Method
19 Operating eye test
   19.1 Installation
   19.2 Method
20 Capacitive test point performance
   20.1 Installation
   20.2 Test method
Annex A (informative) Determination of the cable
         conductor temperature
Annex B (informative) Details of the test chamber and
         spray equipment for humidity and salt fog tests
Bibliography

Provides the test methods to be used for type testing accessories for power cables with rated voltage from 3,6/6 (7,2) kV up to 18/30 (36) kV.

DevelopmentNote
Supersedes I.S. HD 628 (05/2005) For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
DocumentType
Standard
Pages
76
PublisherName
National Standards Authority of Ireland
Status
Current
Supersedes

Standards Relationship
EN 61442:2005 Identical
NBN EN 61442 : 2006 Identical
DIN EN 61442 : 2006 Identical
IEC 61442:2005 Identical
UNE-EN 61442:2005 Identical
BS EN 61442:2005 Identical
NF EN 61442 : 2005 Identical

IEC 60270:2000+AMD1:2015 CSV High-voltage test techniques - Partial discharge measurements
IEC 60055-1:1997+AMD1:2005 CSV Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 1: Tests on cables and their accessories
IEC 60228:2004 Conductors of insulated cables
IEC 60986:2000+AMD1:2008 CSV Short-circuit temperature limits of electric cables with rated voltages from 6 kV (<em>U</em><sub>m</sub> = 7,2 kV) up to 30 kV (<em>U</em><sub>m</sub> = 36 kV)
EN 61238-1:2003 Compression and mechanical connectors for power cables for rated voltages up to 36 kV (Um = 42 kV) - Part 1: Test methods and requirements
IEC 60502-2:2014 RLV Power cables with extruded insulation and their accessories for rated voltages from 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) up to 30 kV (<em>U</em><sub>m</sub> = 36 kV) – Part 2: Cables for rated voltages from 6 kV (<em>U</em><sub>m</sub> = 7,2 kV) up to 30 kV (<em>U</em><sub>m</sub> = 36 kV)
IEC 60885-3:2015 RLV Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables
HD 588.1 : S1 AMD 1 HIGH VOLTAGE TEST TECHNIQUES - GENERAL DEFINITIONS AND TEST REQUIREMENTS
EN 60270:2001/A1:2016 HIGH-VOLTAGE TEST TECHNIQUES - PARTIAL DISCHARGE MEASUREMENTS (IEC 60270:2000/A1:2015)
IEC 60230:1966 Impulse tests on cables and their accessories
IEC 60811-1-2:1985 Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section Two: Thermal ageing methods
IEC 61238-1:2003 Compression and mechanical connectors for power cables for rated voltages up to 30 kV (Um = 36 kV) - Part 1: Test methods and requirements
EN 60811-1-2:1995/A2:2000 INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - COMMON TEST METHODS - GENERAL APPLICATION - THERMAL AGEING METHODS
EN 60885-3:2015 Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables
EN 60230:2002 Impulse tests on cables and their accessories
IEC 60060-1:2010 High-voltage test techniques - Part 1: General definitions and test requirements
IEC 60507:2013 Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems

View more information
US$117.30
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.