• There are no items in your cart

I.S. EN 61858:2008

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

ELECTRICAL INSULATION SYSTEMS - THERMAL EVALUATION OF MODIFICATIONS TO AN ESTABLISHED WIRE-WOUND EIS
Available format(s)

Hardcopy , PDF

Superseded date

06-30-2014

Language(s)

English

Published date

01-01-2008

Preview

For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.

Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General considerations
5 Evaluation of the change of thickness of an EIM
   5.1 Samples
   5.2 Acceptance
6 Substitution of winding wire
   6.1 General
   6.2 Substitution of enamel
   6.3 Substitution of conductor material
   6.4 Alternate winding wire
7 Substitution of impregnating resin/varnish
   7.1 Thermal class determination
   7.2 Evaluation
        7.2.1 Thermal classes equal or better
        7.2.2 One thermal class lower
        7.2.3 Other criteria
8 Substitution with other EIM
   8.1 Technically equivalent materials
   8.2 Previous evaluation
   8.3 Other
9 Evaluation of additions
   9.1 Addition of an impregnating resin/varnish
   9.2 Addition of other components
10 Single-point thermal ageing test
   10.1 Test objects
   10.2 Establishing the EIS relative thermal endurance
        index (EIS RTE)
   10.3 Interpretation of results
Annex A (normative) Classes of winding wire
Annex B (normative) Compatibility test procedure
Annex ZA (normative) Normative references to
         international publications with their corresponding
         European publications
Bibliography

Lists the required test procedures for qualification of modifications of an established electrical insulation system (EIS) with respect to its thermal classification.

DocumentType
Standard
Pages
50
PublisherName
National Standards Authority of Ireland
Status
Superseded
SupersededBy

Standards Relationship
DIN EN 61858 : 2009 Identical
IEC 61858:2008 Identical
EN 61858:2008 Identical
NF EN 61858 : 2009 Identical
SN EN 61858 : 2008 Identical
NBN EN 61858 : 2009 Identical
UNE-EN 61858:2009 Identical
BS EN 61858:2008 Identical

IEC 60317-3:2004+AMD1:2010 CSV Specifications for particular types of winding wires - Part 3: Polyester enamelled round copper wire, class 155
EN 60317-30:1996/A2:2005 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 30: POLYIMIDE ENAMELLED RECTANGULAR COPPER WIRE, CLASS 220
IEC 60317-42:1997+AMD1:2010 CSV Specifications for particular types of winding wires - Part 42: Polyester-amide-imide enamelled round copper wire, class 200
IEC 60317-7:1990+AMD1:1997+AMD2:1997 CSV Specifications for particular types of winding wires - Part 7: Polyimide enamelled round copper wire, class 220
IEC 60317-41:1996 Specifications for particular types of winding wires - Part 41: Solderable polyester enamelled round copper wire, class 130L
EN 60085:2008 Electrical insulation - Thermal evaluation and designation
IEC 60317-15:2004+AMD1:2010 CSV Specifications for particular types of winding wires - Part 15: Polyesterimide enamelled round aluminium wire, class 180
IEC 60317-51:2014 Specifications for particular types of winding wires - Part 51: Solderable polyurethane enamelled round copper wire, class 180
HD 555.16 : 200S2 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - POLYESTER ENAMELLED RECTANGULAR COPPER WINDING WIRE, CLASS 155
IEC 60317-4:2015 Specifications for particular types of winding wires - Part 4: Solderable polyurethane enamelled round copper wire, class 130
EN 60317-29:1996/A2:2010 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 29: POLYESTER OR POLYESTERIMIDE OVERCOATED WITH POLYAMIDE-IMIDE ENAMELLED RECTANGULAR COPPER WIRE, CLASS 200
IEC 60317-21:2013 Specifications for particular types of winding wires - Part 21: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155
IEC 60317-47:2013 Specifications for particular types of winding wires - Part 47: Aromatic polyimide enamelled rectangular copper wire, class 240
EN 60317-15:2004/A1:2010 Specifications for particular types of winding wires - Part 15: Polyesterimide enamelled round aluminium wire, class 180
IEC 60317-19:1990+AMD1:1997+AMD2:1999 CSV Specifications for particular types of winding wires - Part 19: Solderable polyurethane enamelled round copper wire, overcoated with polyamide, class 130
IEC 60317-8:2010 Specifications for particular types of winding wires - Part 8: Polyesterimide enamelled round copper wire, class 180
EN 60317-25:2010 Specifications for particular types of winding wires - Part 25: Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200
EN 60317-46:2014 Specifications for particular types of winding wires - Part 46: Aromatic polyimide enamelled round copper wire, class 240
IEC 60317-34:1997 Specifications for particular types of winding wires - Part 34: Polyester enamelled round copper wire, class 130L
IEC 60317-30:1990 Specifications for particular types of winding wires. Part 30: Polyimide enamelled rectangular copper wire, class 220
IEC 60505:2011 Evaluation and qualification of electrical insulation systems
IEC 60085:2007 Electrical insulation - Thermal evaluation and designation
IEC 60317-23:2013 Specifications for particular types of winding wires - Part 23: Solderable polyesterimide enamelled round copper wire, class 180
IEC 60317-24:1990 Specifications for particular types of winding wires. Part 24: Polyester or polyesterimide enamelled round aluminium wire overcoated with polyamide, class 180
EN 60317-47:2014 Specifications for particular types of winding wires - Part 47: Aromatic polyimide enamelled rectangular copper wire, class 240
IEC 60172:2015 Test procedure for the determination of the temperature index of enamelled and tape wrapped winding wires
IEC 61857-1:2008 Electrical insulation systems - Procedures for thermal evaluation - Part 1: General requirements - Low-voltage
EN 60317-21:2014 Specifications for particular types of winding wires - Part 21: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155
EN 60317-13:2010 Specifications for particular types of winding wires - Part 13: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200
EN 61033 : 2006 TEST METHODS FOR THE DETERMINATION OF BOND STRENGTH OF IMPREGNATING AGENTS TO AN ENAMELLED WIRE SUBSTRATE
EN 60317-19:1995/A2:2000 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 19: SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE OVERCOATED WITH POLYAMIDE, CLASS 130
IEC 60317-13:2010 Specifications for particular types of winding wires - Part 13: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200
EN 60172:2015 Test procedure for the determination of the temperature index of enamelled and tape wrapped winding wires
EN 60216-5:2008 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
IEC 60317-20:2013 Specifications for particular types of winding wires - Part 20: Solderable polyurethane enamelled round copper wire, class 155
IEC 60317-25:2010 Specifications for particular types of winding wires - Part 25: Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200
IEC 60317-22:2004+AMD1:2009 CSV Specifications for particular types of winding wires - Part 22: Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180
EN 60317-20:2014 Specifications for particular types of winding wires - Part 20: Solderable polyurethane enamelled round copper wire, class 155
IEC 60317-46:2013 Specifications for particular types of winding wires - Part 46: Aromatic polyimide enamelled round copper wire, class 240
EN 60317-8:2010 Specifications for particular types of winding wires - Part 8: Polyesterimide enamelled round copper wire, class 180
EN 60317-22:2004/A1:2010 Specifications for particular types of winding wires - Part 22: Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180
IEC 60317-29:1990 Specifications for particular types of winding wires. Part 29: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200
IEC 60216-5:2008 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
EN 60317-23:2014 Specifications for particular types of winding wires - Part 23: Solderable polyesterimide enamelled round copper wire, class 180
EN 60505:2011/AC:2017-03 EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS (IEC 60505:2011/COR1:2017)
HD 555.7 : 200S2 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - POLYIMIDE ENAMELLED ROUND COPPER WINDING WIRE, CLASS 220
EN 60317-42:1997/A1:2010 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 42: POLYESTER-AMIDE-IMIDE ENAMELLED ROUND COPPER WIRE, CLASS 200
IEC 61033:1991 Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate
EN 60317-51:2014 Specifications for particular types of winding wires - Part 51: Solderable polyurethane enamelled round copper wire, class 180
EN 61857-1:2009 Electrical insulation systems - Procedures for thermal evaluation - Part 1: General requirements - Low-voltage
EN 60317-4:1994/A2:2000 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 4: SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE, CLASS 130
IEC 60317-16:1990 Specifications for particular types of winding wires. Part 16: Polyester enamelled rectangular copper wire, class 155

View more information
US$76.74
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.