• There are no items in your cart

I.S. EN 62155:2003

Current
Current

The latest, up-to-date edition.

HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2003

Preview

For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.

Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

FOREWORD
1 Scope and object
   1.1 General
   1.2 Hollow insulators or hollow insulator bodies
        intended for general use
   1.3 Ceramic hollow insulators intended for use with
        permanent gas pressure
2 Normative references
3 Terms and definitions
4 Insulating materials
5 General recommendations for design
   5.1 General recommendations for design of hollow
        insulators and hollow insulator bodies intended
        for general use
   5.2 Design rules for hollow insulators and hollow
        insulator bodies for use with permanent gas
        pressure
6 Classification of the tests, sampling rules and
   procedures
   6.1 Classification of the tests
   6.2 Relevant tests for type, sample and routine
        tests
   6.3 Hollow insulator or hollow insulator body
        selection
   6.4 Retest procedure for sample tests
   6.5 Quality assurance
7 General test procedures and requirements
   7.1 Verification of the dimensions and roughness
        of ground surfaces
   7.2 Mechanical failing load tests
   7.3 Temperature cycle test
   7.4 Porosity test
   7.5 Galvanizing test
8 Type tests
   8.1 Tests
   8.2 Pressure test
   8.3 Bending test
9 Sample tests
   9.1 Tests for hollow insulators or hollow insulator
        bodies intended for general use
   9.2 Tests for ceramic hollow insulators or hollow
        insulator bodies intended for use with permanent
        gas pressure
10 Routine tests
   10.1 Tests for hollow insulators or hollow insulator
        bodies intended for general use
   10.2 Tests for ceramic hollow insulators or hollow
        insulator bodies intended for use with permanent
        gas pressure
   10.3 Routine visual inspection
   10.4 Electrical routine test
   10.5 Routine mechanical tests for hollow insulators
        or hollow insulator bodies intended for general
        use
   10.6 Routine mechanical tests for ceramic hollow
        insulators or hollow insulator bodies intended
        for use with permanent gas pressure
   10.7 Routine thermal shock test
11 Documentation
   11.1 Marking
   11.2 Records
Annex A (informative) Methods of testing for tolerances
        of parallelism, coaxiality, eccentricity,
        angular deviation, camber and shed angle of
        hollow insulators or hollow insulator bodies
Annex B (informative) Methods for bending tests of
        hollow insulator bodies
Annex C (informative) Alternative test method for the
        temperature-cycle test
Annex D (informative) Bending moment equivalent to the
        design pressure
Bibliography

Applicable to: - ceramic and glass hollow insulators intended for general use in electrical equipment; - ceramic hollow insulators intended for use with a permanent gas pressure in switchgear and controlgear.

DevelopmentNote
Supersedes I.S. EN 61264 (10/2003) For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
DocumentType
Standard
Pages
112
PublisherName
National Standards Authority of Ireland
Status
Current
Supersedes

Standards Relationship
SN EN 62155 : 2003 Identical
IEC 62155:2003 Identical
UNE-EN 62155:2006 Identical
EN 62155:2003 Identical
BS EN 62155:2003 Identical
DIN EN 62155 : 2004 Identical
NF EN 62155 : 2003 Identical
NBN EN 62155 : 2003 Identical

IEC 62271-100:2008+AMD1:2012+AMD2:2017 CSV High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers
EN ISO 4287:1998/A1:2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS
ISO 4287:1997 Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters
IEC 60050-471:2007 International Electrotechnical Vocabulary (IEV) - Part 471: Insulators
EN ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009)
ISO 1101:2017 Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
IEC 60672-3:1997 Ceramic and glass-insulating materials - Part 3: Specifications for individual materials
EN 61166:1993 High-voltage alternating current circuit-breakers - Guide for seismic qualification of high-voltage alternating current circuit-breakers
ISO 1463:2003 Metallic and oxide coatings Measurement of coating thickness Microscopical method
EN ISO 2064 : 2000 METALLIC AND OTHER INORGANIC COATINGS - DEFINITIONS AND CONVENTIONS COVERING THE MEASUREMENT OF THICKNESS
ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods
EN 60672-3:1997 Ceramic and glass-insulating materials - Part 3: Specifications for individual materials
IEC 61166:1993 High-voltage alternating current circuit-breakers - Guide for seismic qualification of high-voltage alternating current circuit-breakers
IEC 60694:1996+AMD1:2000+AMD2:2001 CSV Common specifications for high-voltage switchgear and controlgear standards
IEC 60865-1:2011 Short-circuit currents - Calculation of effects - Part 1: Definitions and calculation methods
EN ISO 1460 : 1994 METALLIC COATINGS - HOT DIP GALVANIZED COATINGS ON FERROUS MATERIALS - GRAVIMETRIC DETERMINATION OF THE MASS PER UNIT AREA
IEC TR 60865-2:2015 Short-circuit currents - Calculation of effects - Part 2: Examples of calculation
IEC 60437:1997 Radio interference test on high-voltage insulators
EN 60694:1996/A2:2001 COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS
ISO 9004:2009 Managing for the sustained success of an organization A quality management approach
IEC TS 61245:2015 Artificial pollution tests on high-voltage ceramic and glass insulators to be used on d.c. systems
IEC 61462:2007 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods, acceptance criteria and design recommendations
IEC 60273:1990 Characteristic of indoor and outdoor post insulators for systems with nominal voltages greater than 1000 V
EN 60865-1:2012 Short-circuit currents - Calculation of effects - Part 1: Definitions and calculation methods
ISO 9001:2015 Quality management systems — Requirements
ISO 2178:2016 Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method
ISO 9003:1994 Quality systems Model for quality assurance in final inspection and test
ISO 1460:1992 Metallic coatings Hot dip galvanized coatings on ferrous materials Gravimetric determination of the mass per unit area
IEC 60507:2013 Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems
ISO 2064:1996 Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness
IEC TS 61463:2016 Bushings - Seismic qualification
IEC 60672-1:1995 Ceramic and glass insulating materials - Part 1: Definitions and classification
EN ISO 2178:2016 Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:2016)

View more information
US$163.34
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.