• There are no items in your cart

I.S. EN 676:2003

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
Available format(s)

Hardcopy , PDF

Superseded date

02-10-2020

Language(s)

English

Published date

01-01-2003

Preview

For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.

Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

Foreword
1 Scope
2 Normative references
3 Terms and definitions
  3.1 General terms and definitions
  3.2 Specific terms and definitions
4 Constructional and operational requirements - safety requirements
  and/or protective measures
  4.1 Conversion to different gases
  4.2 Construction
  4.3 Equipment
  4.4 Functional and operational requirements
  4.5 Machine safety requirements and/or protective measures
5 Test methods
  5.1 General
  5.2 Functional tests
  5.3 Operation
  5.4 Tests to be carried out on the working and test diagrams
  5.5 Combustion
  5.6 Start-up
  5.7 Obtaining the heat input
  5.8 Electrical safety
  5.9 Verification of safety and/or protective measures
6 Marking, labelling and packaging
  6.1 General
  6.2 Data plate
  6.3 Other marking
  6.4 Instructions for installation, adjustment, maintenance and
      operation
  6.5 Marking on the packaging
Annex A (informative) Determination of the combustion
        characteristics - carbon monoxide and nitrogen oxides
Annex B (informative) Examples of control box sequencing
Annex C (informative) Test gases
      C.1 General
      C.2 Conditions for preparation of the test gases
      C.3 Practical application of the test gases
Annex D (informative) Gas connections conditions in common use
        in the various countries
Annex E (informative) Tests
      E.1 Supplementary testing
      E.2 Drawing review
      E.3 Individual test and inspection
      E.4 Test report
Annex F (informative) Use of alternative gas lines and test
        documentation
      F.1 Use of alternative gas lines
      F.2 Test documentation
Annex G (informative) Correction of the influence of combustion
        air temperature and humidity on NO[x]-emissions
Annex H (informative) Check of the air proving device
Annex I (informative) Additional recommendations for specific
        applications
      I.1 General
      I.2 Pre-heating of the combustion air
      I.3 Continuous working of the air ventilator
      I.4 Variable excess of combustion air
      I.5 Burner with start gas flame
      I.6 Air filtering
Annex J (normative) Machine related hazards - safety requirements
        and/or protective measures
      J.1 General
      J.2 List of significant hazards
      J.3 Safety requirements and/or protective measures
      J.4 Verification of machine safety requirements and/or
        protective measures
      J.5 Information for use
Annex K (normative) Additional requirements for burners with
        pressurised parts and burners firing pressurised bodies
        as defined in Pressure Equipment Directive (PED) 97/23/EC
      K.1 General
      K.2 Design
      K.3 Materials
      K.4 Pressurised parts
      K.5 Gas line components
      K.6 Gas pressure governor
      K.7 High gas pressure over load protection device
      K.8 Automatic safety shut-off valve
      K.9 Air proving device
      K.10 Automatic burner control system
      K.11 Means for draining and venting
      K.12 General functions requirements
      K.13 External safety limiter
      K.14 Design according to EN 50156-1
      K.15 Consideration: safety life cycle
      K.16 Tests of pressurised parts
      K.17 Other marking
      K.18 Instructions for installation, adjustment, maintenance
           and operation
Annex ZA (informative) A-deviations
Annex ZB (informative) Clauses of this European Standard
         addressing essential requirements or other
         provisions of EU Directives
Annex ZC (informative) Relationship between this European
         Standard and the essential safety requirements of
         the Pressure Equipment (PED) Directive 97/23/EC
Annex ZD (informative) Relationship between this European
         Standard and the Essential Requirements of EU
         Directive 98/37/EC Machinery Directive
Annex ZE (informative) Relationship between this European
         Standard and the Essential Requirements of EU
         Directive 2006/42/EC Machinery Directive
Bibliography

Describes the terminology, the general requirements for the construction and operation of automatic forced draught gas burners and also the provision of control and safety devices, and the test procedure for these burners.

DevelopmentNote
2003 Edition Re-Issued in August 2008 & incorporates AMD 2 2008. (08/2008)
DocumentType
Standard
Pages
103
PublisherName
National Standards Authority of Ireland
Status
Superseded
SupersededBy
Supersedes

EN 10208-2:2009 Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B
EN 294:1992/AC:1993 SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS
EN ISO 15609-5:2011 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 5: Resistance welding (ISO 15609-5:2011, Corrected version 2011-12-01)
IEC 60335-2-102:2004+AMD1:2008+AMD2:2012 CSV Household and similar electrical appliances - Safety - Part 2-102:Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
ISO 4871:1996 Acoustics — Declaration and verification of noise emission values of machinery and equipment
ISO 9606-4:1999 Approval testing of welders — Fusion welding — Part 4: Nickel and nickel alloys
EN ISO 15614-11:2002 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2002)
ISO 9606-2:2004 Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys
ISO 6976:2016 Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition
EN 1088:1995+A2:2008 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection
ISO 15614-11:2002 Specification and qualification of welding procedures for metallic materials Welding procedure test Part 11: Electron and laser beam welding
EN 12067-2:2004 Gas/air ratio controls for gas burners and gas burning appliances - Part 2: Electronic types
ISO 9606-5:2000 Approval testing of welders — Fusion welding — Part 5: Titanium and titanium alloys, zirconium and zirconium alloys
EN ISO 15612:2004 Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure (ISO 15612:2004)
EN 1643:2014 Safety and control devices for gas burners and gas burning appliances - Valve proving systems for automatic shut-off valves
ISO 13732-1:2006 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
EN 12067-1 : 98 AMD 1 2003 GAS/AIR RATIO CONTROLS FOR GAS BURNERS AND GAS BURNING APPLIANCES - PART 1: PNEUMATIC TYPES
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN 1092-3:2003/AC:2007 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 3: COPPER ALLOY FLANGES
IEC 60947-5-1 : 4.0 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
EN ISO 15609-2:2001/A1:2003 SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION - PART 2: GAS WELDING
EN ISO 9606-4:1999 Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9606-4:1999)
EN 88-2:2007 Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar
EN 1050 : 1996 SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT
EN ISO 3166-1:2014 Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2013)
ISO 15609-3:2004 Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 3: Electron beam welding
EN 161:2011+A3:2013 Automatic shut-off valves for gas burners and gas appliances
EN 12952-7:2012 Water-tube boilers and auxiliary installations - Part 7: Requirements for equipment for the boiler
EN 267:2009+A1:2011 Automatic forced draught burners for liquid fuels
EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
ISO 15612:2004 Specification and qualification of welding procedures for metallic materials Qualification by adoption of a standard welding procedure
EN 1854:2010 Pressure sensing devices for gas burners and gas burning appliances
EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding
ISO 7-1:1994 Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation
EN 437:2003+A1:2009 Test gases - Test pressures - Appliance categories
EN ISO 12100-1:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
EN 12516-3:2002/AC:2003 VALVES - SHELL DESIGN STRENGTH - PART 3: EXPERIMENTAL METHOD
EN 953:1997+A1:2009 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
EN ISO 9606-2:2004 Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004)
EN 334:2005+A1:2009 Gas pressure regulators for inlet pressures up to 100 bar
EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
ISO 15614-7:2016 Specification and qualification of welding procedures for metallic materials Welding procedure test Part 7: Overlay welding
EN 60335-2-102:2016 Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
EN 10204:2004 Metallic products - Types of inspection documents
ISO 12100-2:2003 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
EN ISO 12100-2:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
EN ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004)
ISO 15609-2:2001 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 2: Gas welding
ISO 3166-1:2013 Codes for the representation of names of countries and their subdivisions Part 1: Country codes
EN 50156-1:2015 Electrical equipment for furnaces and ancillary equipment - Part 1: Requirements for application design and installation
EN ISO 9606-5:2000 Approval testing of welders - Fusion welding - Part 5: Titanium and titanium alloys, zirconium and zirconium alloys (ISO 9606-5:2000)
ISO 15609-5:2011 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 5: Resistance welding
EN 12952-11:2007 Water-tube boilers and auxiliary installations - Part 11: Requirements for limiting devices of the boiler and accessories
ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
EN ISO 4871:2009 Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
EN 60335-1:2012/A13:2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
IEC 61310-1:2007 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
EN 298:2012 Automatic burner control systems for burners and appliances burning gaseous or liquid fuels
EN 10216-1:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
EN ISO 15609-4:2009 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding (ISO 15609-4:2009)
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
EN ISO 15609-3:2004 Specification and qualification of welding procedures for metallic materials - Welding procedures specification - Part 3: Electron beam welding (ISO 15609-3:2004)
EN 10208-1:2009 Steel pipes for pipelines for combustible fluids - Technical delivery condi-tions - Part 1: Pipes of requirement class A
EN 10220:2002 Seamless and welded steel tubes - Dimensions and masses per unit length
EN 1092-2:1997 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges
ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
EN 61310-1:2008 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
ISO 15609-4:2009 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 4: Laser beam welding
EN 88-1:2011+A1:2016 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa
ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
EN 15036-1:2006 Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 1: Airborne noise emissions from heat generators
EN 10217-1:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
EN ISO 9606-3 : 1999 Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO 9606-3:1999)
EN 60730-1:2016 Automatic electrical controls - Part 1: General requirements
EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
ISO 9606-3:1999 Approval testing of welders — Fusion welding — Part 3: Copper and copper alloys
IEC 60730-1:2013+AMD1:2015 CSV Automatic electrical controls - Part 1: General requirements

View more information
US$118.39
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.