I.S. EN ISO 13709:2009
Current
The latest, up-to-date edition.
Hardcopy , PDF
01-01-2009
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General
5 Requirements
6 Basic design
7 Accessories
8 Inspection, testing, and preparation for shipment
9 Specific pump types
10 Vendor's data
Annex A (informative) Specific speed and suction-specific
speed
Annex B (normative) Cooling water and lubrication system
schematics
Annex C (normative) Hydraulic power recovery turbines
Annex D (normative) Standard baseplates
Annex E (informative) Inspector's checklist
Annex F (normative) Criteria for piping design
Annex G (informative) Materials class selection guidance
Annex H (normative) Materials and material specifications
for pump parts
Annex I (normative) Lateral analysis
Annex J (normative) Determination of residual unbalance
Annex K (informative) Shaft stiffness and bearing system life
Annex L (informative) Vendor drawing and data requirements
Annex M (informative) Test data summary
Annex N (informative) Pump datasheets and electronic data
exchange
Bibliography
Provides requirements for centrifugal pumps, including pumps running in reverse as hydraulic power recovery turbines, for use in petroleum, petrochemical and gas industry process services. Applicable to overhung pumps, between-bearings pumps and vertically suspended pumps.
DocumentType |
Standard
|
Pages |
198
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Current
|
Supersedes |
Standards | Relationship |
UNI EN ISO 13709 : 2012 | Identical |
ISO 13709:2009 | Identical |
DIN EN ISO 13709:2010-05 | Identical |
EN ISO 13709:2009 | Identical |
NF EN ISO 13709 : 2010 | Identical |
BS EN ISO 13709:2003 | Identical |
NS EN ISO 13709 : 2009 | Identical |
NEN EN ISO 13709 : 2010 | Identical |
ISO 9906:2012 | Rotodynamic pumps — Hydraulic performance acceptance tests — Grades 1, 2 and 3 |
EN 10269:2013 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
ISO 14691:2008 | Petroleum, petrochemical and natural gas industries — Flexible couplings for mechanical power transmission — General-purpose applications |
ISO 15649:2001 | Petroleum and natural gas industries — Piping |
AGMA 9002 : B | BORES AND KEYWAYS FOR FLEXIBLE COUPLINGS (INCH SERIES) |
ISO 9905:1994 | Technical specifications for centrifugal pumps — Class I |
API 500 : 2012 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
ABMA 9 : 2015 | LOAD RATINGS AND FATIGUE LIFE FOR BALL BEARINGS |
ISO 7005-2:1988 | Metallic flanges — Part 2: Cast iron flanges |
ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
ASTM A 995/A995M : 2013 | Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts |
ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs |
EN 10028-3:2017 | Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized |
HI 1.6 : 2000 | CENTRIFUGAL PUMP TESTS |
EN 10273:2016 | Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
ISO 14120:2015 | Safety of machinery Guards General requirements for the design and construction of fixed and movable guards |
API 682 : 2014 | PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS |
ISO/TR 17766:2005 | Centrifugal pumps handling viscous liquids — Performance corrections |
IEEE 841-2009 | IEEE Standard for Petroleum and Chemical Industry--Premium-Efficiency, Severe-Duty, Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors--Up to and Including 370 kW (500 hp) |
EN 1759-1:2004 | Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24 |
API 685 : 2011 | SEALLESS CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL, AND GAS INDUSTRY PROCESS SERVICE |
EN 13463-1:2009 | Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements |
EN 10088-3:2014 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
ISO 724:1993 | ISO general-purpose metric screw threads — Basic dimensions |
API 614 : 2008 | LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES |
ASTM A 516/A516M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service |
ISO 3740:2000 | Acoustics Determination of sound power levels of noise sources Guidelines for the use of basic standards |
ISO 1940-1:2003 | Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances |
ISO 4991:2015 | Steel castings for pressure purposes |
EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
ISO 281:2007 | Rolling bearings Dynamic load ratings and rating life |
EN 10028-7:2016 | Flat products made of steels for pressure purposes - Part 7: Stainless steels |
NACE MR 01 75 : 2003 | METALS FOR SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING RESISTANCE IN SOUR OILFIELD ENVIRONMENTS |
EN 10283:2010 | Corrosion resistant steel castings |
ISO 15156-2:2015 | Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons |
ISO 262:1998 | ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts |
API 670 : 2014 | MACHINERY PROTECTION SYSTEMS |
ISO 10721-2:1999 | Steel structures — Part 2: Fabrication and erection |
EN 10272:2016 | Stainless steel bars for pressure purposes |
ISO 15156-3:2015 | Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys |
ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
ISO 3746:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane |
ISO 21049:2004 | Pumps Shaft sealing systems for centrifugal and rotary pumps |
IEC 60034-2-1:2014 | Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) |
ISO 9329-2:1997 | Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 2: Unalloyed and alloyed steels with specified elevated temperature properties |
ISO 3117:1977 | Tangential keys and keyways |
ISO 683-18:2014 | Heat-treatable steels, alloy steels and free-cutting steels — Part 18: Bright steel products |
HI 2.6 : 2000 | VERTICAL PUMP TESTS |
EN 10222-5:2017 | Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels |
EN 10250-4:1999 | Open die steel forgings for general engineering purposes - Part 4: Stainless steels |
HI 9.6.7 : 2015 | ROTODYNAMIC PUMPS - GUIDELINE FOR EFFECTS OF LIQUID VISCOSITY ON PERFORMANCE |
EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
ISO 4200:1991 | Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length |
NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
EN 10222-2:2017 | Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties |
IEC 60034-1:2017 | Rotating electrical machines - Part 1: Rating and performance |
ISO 15156-1:2015 | Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 1: General principles for selection of cracking-resistant materials |
ASTM A 105/A105M : 2014-11 | SPECIFICATION FOR CARBON STEEL FORGINGS FOR PIPING APPLICATIONS |
API 610 : 2010 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
EN 10083-1:2006 | Steels for quenching and tempering - Part 1: General technical delivery conditions |
ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
EN 10083-2:2006 | Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels |
ISO 261:1998 | ISO general purpose metric screw threads General plan |
API STD 541 : 2014 | FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER |
ISO 5753:1991 | Rolling bearings — Radial internal clearance |
API 686 : 2009 | RECOMMENDED PRACTICE FOR MACHINERY INSTALLATION AND INSTALLATION DESIGN |
MSS SP 55 : 2011 | QUALITY STANDARD FOR STEEL CASTINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - VISUAL METHOD FOR EVALUATION OF SURFACE IRREGULARITIES |
ISO 185:2005 | Grey cast irons Classification |
ABMA 20 : 2011 | RADIAL BEARINGS OF BALL, CYLINDRICAL ROLLER AND SPHERICAL ROLLER TYPES - METRIC DESIGN |
ISO 7005-1:2011 | Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems |
ISO 10441:2007 | Petroleum, petrochemical and natural gas industries Flexible couplings for mechanical power transmission Special-purpose applications |
AWS D1.1/D1.1M : 2015 | STRUCTURAL WELDING CODE-STEEL |
ASTM A 312/A312M : 2017-03 | SPECIFICATION FOR SEAMLESS, WELDED, AND HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES |
EN 10208-1:2009 | Steel pipes for pipelines for combustible fluids - Technical delivery condi-tions - Part 1: Pipes of requirement class A |
API 547 : 2017 | GENERAL PURPOSE FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 185 KW (250 HP) THROUGH 2240 KW (3000 HP) |
ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts |
AGMA 9000 : C | FLEXIBLE COUPLINGS - POTENTIAL UNBALANCE CLASSIFICATION |
ISO 3448:1992 | Industrial liquid lubricants — ISO viscosity classification |
ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
ISO 683-1:2016 | Heat-treatable steels, alloy steels and free-cutting steels Part 1: Non-alloy steels for quenching and tempering |
ABMA 7 : 1995 | SHAFT AND HOUSING FITS FOR METRIC RADIAL BALL AND ROLLER BEARINGS (EXCEPT TAPERED ROLLER BEARINGS) CONFORMING TO BASIC BOUNDARY PLAN |
EN 1561:2011 | Founding - Grey cast irons |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.