• There are no items in your cart

IEC 60060-3:1976

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

High-voltage test techniques - Part 3: Measuring devices
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

09-12-2022

Language(s)

English, English - French, Russian

Published date

01-01-1976

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Common tests and checks on a measuring system
   4.1 Acceptance test
   4.2 Performance test
   4.3 Performance check
   4.4 Record of performance
5 Tests with direct voltage
   5.1 General
   5.2 Definitions for direct voltage tests
   5.3 Test voltage
   5.4 Measurement of the test voltage
   5.5 Tests and checks on measuring systems
   5.6 Withstand voltage test procedure
6 Tests with alternating voltage
   6.1 General
   6.2 Definitions for alternating voltage tests
   6.3 Test voltage
   6.4 Measurement of the test voltage
   6.5 Tests and checks on measuring systems
   6.6 Withstand voltage test procedure
7 Tests with lightning impulse voltage
   7.1 General
   7.2 Definitions for lightning impulse voltage tests
   7.3 Test voltage
   7.4 Measurement of the test voltage and determination
        of the impulse voltage shape
   7.5 Tests and checks on measuring systems
   7.6 Withstand voltage test procedures
8 Tests with switching impulse voltage
   8.1 General
   8.2 Definitions for switching impulse voltage tests
   8.3 Test voltage
   8.4 Measurement of the test voltage and determination
        of the impulse shape
   8.5 Tests and checks on measuring systems
   8.6 Withstand voltage test procedures
9 Tests with very low frequency voltages
   9.1 General
   9.2 Definitions for very low frequency voltage tests
   9.3 Test voltage
   9.4 Measurement of the test voltage
   9.5 Tests and checks on measuring systems
   9.6 Test procedure
10 Tests with damped alternating voltages
   10.1 General
   10.2 Definitions for damped alternating voltage tests
   10.3 Test voltage
   10.4 Measurement of the test voltage
   10.5 Tests and checks on measuring systems
   10.6 Test procedure

Applies to devices and complete systems, other than sphere-gaps, used for the measurement of voltages and currents during dielectric tests with direct voltage, alternating voltage, lightning and switching impulse voltages and for tests with high-impulse currents. Voltage measurements with sphere-gaps are dealt with in IEC 52. Gives guidance concerning the quantities to be measured, accuracies required and requirements of measuring systems.

Committee
TC 42
DevelopmentNote
Supersedes IEC 60060 (07/2004) Stability Date: 2017. (10/2012)
DocumentType
Standard
Pages
40
PublisherName
International Electrotechnical Committee
Status
Superseded

NF EN 61229 : 96 AMD 2 2003 RIGID PROTECTIVE COVERS FOR LIVE WORKING ON A.C. INSTALLATIONS
07/30161538 DC : 0 BS EN 60060-2 - HIGH-VOLTAGE TEST TECHNIQUES - PART 2: MEASURING SYSTEMS
PD IEC/TR 63042-100:2016 UHV AC transmission systems General information
CAN/CSA-ISO/IEC 8802-5-02 (R2011) Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 5: Token Ring Access Method and Physical Layer Specifications (Adopted ISO/IEC 8802-5:1998 / ANSI/IEEE 802.5:1998, third edition, 1998-09-15)
CEI EN 61083-2 : 2014 INSTRUMENTS AND SOFTWARE USED FOR MEASUREMENT IN HIGH-VOLTAGE AND HIGH-CURRENT TESTS - PART 2: REQUIREMENTS FOR SOFTWARE FOR TESTS WITH IMPULSE VOLTAGES AND CURRENTS
BS EN 60127-6:2014 Miniature fuses Fuse-holders for miniature fuse-links
I.S. CLC/TS 61112:2006 BLANKETS OF INSULATING MATERIAL FOR ELECTRICAL PURPOSES
EN 61083-2:2013 Instruments and software used for measurement in high-voltage and high-current tests - Part 2: Requirements for software for tests with impulse voltages and currents
EN 61011:1992/A11:1996 ELECTRIC FENCE ENERGIZERS - SAFETY REQUIREMENTS FOR MAINS-OPERATED ELECTRIC FENCE ENERGIZERS
EN 60060-2:2011 High-voltage test techniques - Part 2: Measuring systems
EN 61229:1995/A2:2002 RIGID PROTECTIVE COVERS FOR LIVE WORKING ON A.C. INSTALLATIONS
BS EN 60060-1:2010 High-voltage test techniques General definitions and test requirements
06/30149569 DC : DRAFT APR 2006 IEC 60060-1 - HIGH-VOLTAGE TEST TECHNIQUES - PART 1: GENERAL DEFINITIONS AND TEST REQUIREMENTS
EN 60143 : 93 AC 94 SERIES CAPACITORS FOR POWER SYSTEMS - GENERAL PERFORMANCE, TESTING AND RATING - SAFETY REQUIREMENTS - GUIDE FOR INSTALLATION
BS HD 60269-2:2013 Low-voltage fuses Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application). Examples of standardized systems of fuses A to K
DD ENV 61111:2002 Matting of insulating material for electrical purposes
BS EN 61083-2:2013 Instruments and software used for measurement in high-voltage and high-current tests Requirements for software for tests with impulse voltages and currents
I.S. HD 60269-2:2013 LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO K (IEC 60269-2:2013 (MOD))
CSA E60127.6 : 2003 MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE CARTRIDGE FUSE-LINKS
BS EN 61229:1996 Rigid protective covers for live working on a.c. installations
CAN/CSA-E60127-6-03 (R2017) Miniature Fuses - Part 6: Fuse-Holders for Miniature Cartridge Fuse-Links (Adopted CEI/IEC 127-6:1994, first edition, 1994-04, including Amendment 1:1996, with Canadian deviations) | Coupe-circuit miniatures - Partie 6: Ensembles-porteurs pour cartouches de coupe-circuit miniatures (norme CEI/IEC 127-6:1994 adoptée, première édition, 1994-04, y compris l\'Amendement 1:1996, avec exigences propres au Canada)
IEC 60269-2:2013+AMD1:2016 CSV Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K
I.S. HD 60269-2-1:2005 LOW-VOLTAGE FUSES - PART 2-1: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - SECTIONS 1 TO 6: EXAMPLES OF TYPES OF STANDARDIZED FUSES
IEC 60502-2 REDLINE : 3ED 2014 POWER CABLES WITH EXTRUDED INSULATION AND THEIR ACCESSORIES FOR RATED VOLTAGES FROM 1 KV (U[M] = 1,2 KV) UP TO 30 KV (U[M] = 36 KV) - PART 2: CABLES FOR RATED VOLTAGES FROM 6 KV (U[M] = 7,2 KV) UP TO 30 KV (U[M] = 36 KV)
IEC 60060-2:2010 High-voltage test techniques - Part 2: Measuring systems
BS 88-2(2013) : 2013 COR 2014 LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO K
BS 88-2:2007 Low-voltage fuses Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application). Examples of standardized systems of fuses A to I
BS 88-2(2010) : 2010 LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO J
BS 923-4:1980 Guide on high-voltage testing techniques Application guide for measuring devices
UNE-HD 60269-2:2014 Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K
BS 5622-1:1979 Guide for insulation co-ordination Terms, definitions, principles and rules
10/30232718 DC : 0 BS EN 60076-3 - POWER TRANSFORMERS - PART 3: INSULATION LEVELS, DIELECTRIC TESTS AND EXTERNAL CLEARANCES IN AIR
IEEE 4-2013 IEEE Standard for High-Voltage Testing Techniques
CEI 32-12 : 2014 LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO K
BS EN 61011:1993 Electric fence energizers. Safety requirements for mains-operated electric fence energizers
IEEE 400-2012 REDLINE IEEE Guide for Field Testing and Evaluation of the Insulation of Shielded Power Cable Systems Rated 5 kV and Above
CSA ISO/IEC 8802-5 : 2002 : INC : UPD 1 : 2002 : R2011 INFORMATION TECHNOLOGY - TELECOMMUNICATIONS AND INFORMATION EXCHANGE BETWEEN SYSTEMS - LOCAL AND METROPOLITAN AREA NETWORKS - SPECIFIC REQUIREMENTS - PART 5: TOKEN RING ACCESS METHOD AND PHYSICAL LAYER SPECIFICATIONS
BS IEC 61111:1992 Matting of insulating material for electrical purposes
CLC/TS 61111:2006 Matting of insulating material for electrical purposes
CSA ISO/IEC 8802-5 : 2002 INFORMATION TECHNOLOGY - TELECOMMUNICATIONS AND INFORMATION EXCHANGE BETWEEN SYSTEMS - LOCAL AND METROPOLITAN AREA NETWORKS - SPECIFIC REQUIREMENTS - PART 5: TOKEN RING ACCESS METHOD AND PHYSICAL LAYER SPECIFICATIONS
CSA E60127.6 : 2003 : R2012 MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE CARTRIDGE FUSE-LINKS
BS 5622-2:1979 Guide for insulation co-ordination Application guide
I.S. CLC/TS 61111:2006 MATTING OF INSULATING MATERIAL FOR ELECTRICAL PURPOSES
I.S. EN 60060-2:2011 HIGH-VOLTAGE TEST TECHNIQUES - PART 2: MEASURING SYSTEMS
BS 923-2:1980 Guide on high-voltage testing techniques Test procedures
I.S. EN 61229:1999 RIGID PROTECTIVE COVERS FOR LIVE WORKING ON A.C. INSTALLATIONS
DD ENV 61112:2002 Blankets of insulating material for electrical purposes
11/30229950 DC : 0 BS EN 61083-4 - DIGITAL RECORDERS FOR MEASUREMENTS IN HIGH CURRENT TESTING - PART 4: EVALUATION OF SOFTWARE USED FOR THE DETERMINATION OF PARAMETERS OF WAVEFORMS IN HIGH CURRENT TESTING "PROPOSED HORIZONTAL STANDARD"
BS EN 60044-7:2000 Instrument transformers Electronic voltage transformers
BS EN 60060-2:1995 High-voltage test techniques Measuring systems
12/30259014 DC : 0 BS EN 60127-6 - MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE FUSE-LINKS
11/30241356 DC : 0 BS HD 60269-2 - LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO M
CSA ISO/IEC 8802-5 : 2002 : INC : AMD 1 : 2002 : R2011 INFORMATION TECHNOLOGY - TELECOMMUNICATIONS AND INFORMATION EXCHANGE BETWEEN SYSTEMS - LOCAL AND METROPOLITAN AREA NETWORKS - SPECIFIC REQUIREMENTS - PART 5: TOKEN RING ACCESS METHOD AND PHYSICAL LAYER SPECIFICATIONS
UNE-EN 60060-2:2012 High-voltage test techniques -- Part 2: Measuring systems.
CEI EN 60060-1 : 2015 HIGH-VOLTAGE TEST TECHNIQUES - PART 1: GENERAL DEFINITIONS AND TEST REQUIREMENTS
I.S. EN 60127-6:2014 MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE FUSE-LINKS
HD 60269-2-1:2005 Low-voltage fuses - Part 2-1: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Sections I to VI: Examples of types of standardized fuses
CLC/TS 61112:2006 Blankets of insulating material for electrical purposes
I.S. EN 60060-1:2010 HIGH-VOLTAGE TEST TECHNIQUES - PART 1: GENERAL DEFINITIONS AND TEST REQUIREMENTS
IEC TR 63042-100:2016 UHV AC transmission systems - Part 100: General information
IEC 60502-2:2014 RLV Power cables with extruded insulation and their accessories for rated voltages from 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) up to 30 kV (<em>U</em><sub>m</sub> = 36 kV) – Part 2: Cables for rated voltages from 6 kV (<em>U</em><sub>m</sub> = 7,2 kV) up to 30 kV (<em>U</em><sub>m</sub> = 36 kV)
IEC 60060-1:2010 High-voltage test techniques - Part 1: General definitions and test requirements
IEC 60269-2-1:2004 Low-voltage fuses - Part 2-1: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Sections I to VI: Examples of types of standardized fuses
IEC 61083-2:2013 Instruments and software used for measurement in high-voltage and high-current tests - Part 2: Requirements for software for tests with impulse voltages and currents
IEC 61229:1993+AMD1:1998+AMD2:2002 CSV Rigid protective covers for live working on a.c. installations
IEC 60127-6:2014 Miniature fuses - Part 6: Fuse-holders for miniature fuse-links
IEEE 400.4-2015 IEEE Guide for Field Testing of Shielded Power Cable Systems Rated 5 kV and Above with Damped Alternating Current (DAC) Voltage
UNE-EN 60060-1:2012 High-voltage test techniques - Part 1: General definitions and test requirements
BS EN 60143 : 1993 AMD 8725 SERIES CAPACITORS FOR POWER SYSTEMS
DIN EN 61180-1 : 1995 HIGH-VOLTAGE TEST TECHNIQUES FOR LOW-VOLTAGE EQUIPMENT - PART 1: DEFINITIONS, TEST AND PROCEDURE REQUIREMENTS
BS 7528-1(1991) : 1991 AMD 7925 DIGITAL RECORDERS FOR MEASUREMENTS IN HIGH-VOLTAGE IMPULSE TESTS - REQUIREMENTS FOR DIGITAL RECORDERS
BS IEC 61112:1992 Blankets of insulating material for electrical purposes
DIN IEC 60060-1 : 1994 HIGH VOLTAGE TEST TECHNIQUES - GENERAL SPECIFICATIONS AND TEST REQUIREMENTS
IEEE 400.2-2013 REDLINE IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)(less than 1 Hz)
I.S. EN 61083-2:2013 INSTRUMENTS AND SOFTWARE USED FOR MEASUREMENT IN HIGH-VOLTAGE AND HIGH-CURRENT TESTS - PART 2: REQUIREMENTS FOR SOFTWARE FOR TESTS WITH IMPULSE VOLTAGES AND CURRENTS (IEC 61083-2:2013 (EQV))
CEI EN 60060-2 : 2015 HIGH-VOLTAGE TEST TECHNIQUES - PART 2: MEASURING SYSTEMS
NFC 18 421 : 2007 MATTING OF INSULATING MATERIAL FOR ELECTRICAL PURPOSES
EN 60060-1:2010 High-voltage test techniques - Part 1: General definitions and test requirements
HD 60269-2:2013 Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K
EN 60127-6:2014 Miniature fuses - Part 6: Fuse-holders for miniature fuse-links

IEC 60060-2:2010 High-voltage test techniques - Part 2: Measuring systems
IEC 60060-1:2010 High-voltage test techniques - Part 1: General definitions and test requirements
IEC 60071-1:2006+AMD1:2010 CSV Insulation co-ordination - Part 1: Definitions, principles and rules

View more information
US$273.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.