• There are no items in your cart

IEC 60068-2-13:1983

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Basic environmental testing procedures - Part 2-13: Tests - Test M: Low air pressure
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

09-12-2022

Language(s)

English - French, Russian, Spanish, Castilian

Published date

01-01-1983

Foreword
1. Introduction
2. General description
3. Description of test apparatus
4. Severities
5. Pre-conditioning
6. Initial measurements
7. Conditioning
8. Recovery
9. Final measurements
10. Information to be given in the relevant
    specification
Annex ZA (normative) Normative references to international
                     publications with their corresponding
                     European publications

Determines the ability of components, equipment and other articles to be stored, transported or used under low air pressure conditions.

Committee
TC 104
DevelopmentNote
Also numbered as BS EN 60068-2.13. (09/2005) Stability date: 2018. (09/2017)
DocumentType
Standard
Pages
0
PublisherName
International Electrotechnical Committee
Status
Superseded
SupersededBy
Supersedes

15/30323442 DC : 0 BS EN 62679-4-2 ED 1.0 - ELECTRONIC PAPER DISPLAYS - PART 4-2: ENVIRONMENTAL TEST METHOD
UNE-EN 60068-2-39:2016 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
BS EN 140200:1997 Harmonized system of quality assessment for electronic components. Sectional specification: fixed power resistors
BS EN 61747-5:1998 Liquid crystal and solid-state display devices Environmental, endurance and mechanical test methods
ISO 15003:2006 Agricultural engineering Electrical and electronic equipment Testing resistance to environmental conditions
16/30353588 DC : 0 BS EN 61020-1 ED 3.0 - ELECTROMECHANICAL SWITCHES FOR USE IN ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
02/206181 DC : DRAFT MAY 2002 IEC 61019-1. ED.1 - SURFACE ACOUSTIC WAVE RESONATORS (SAW) OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
PD IEC/TR 60721-4-3:2002 Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Stationary use at weatherprotected locations
BS EN 60938-1:2000 Fixed inductors for electromagnetic interference suppression Generic specification
BS EN 170000:1999 Harmonized system of quality assessment for electronic components. Generic specification: waveguide type dielectric resonators
12/30258507 DC : 0 BS EN 62575-1 - RADIO FREQUENCY (RF) BUK ACOUSTIC WAVE (BAW) FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
IEC 61045-1:1991 Fixed film resistor networks for use in electronic equipment - Part 1: Generic specification
BS EN 196000:1993 Harmonized system of quality assessment for electronic components. Generic specification. Electromechanical switches
BS 2011-2.1Z/AMD:1977 Environmental testing. Tests Test Z/AMD. Combined sequential cold, low air pressure and damp heat test
CEI EN 62341-5 : 2011 ORGANIC LIGHT EMITTING DIODE (OLED) DISPLAYS - PART 5: ENVIRONMENTAL TESTING METHODS
BS EN 62575-1:2016 Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality Generic specification
BS CECC 16000-1:1992 Harmonized system of quality assessment for electronic components. Generic specification: electromechanical all-or-nothing relays General
15/30325282 DC : 0 BS EN 62884-1 - MEASUREMENT TECHNIQUES OF PIEZOELECTRIC, DIELETIRIC AND ELECTROSTATIC OSCILLATORS - PART 1: BASIC METHODS FOR THE MEASUREMENT
14/30311384 DC : 0 BS EN 60115-2:2014+A1 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION: LEADED FIXED LOW POWER FILM RESISTORS
BS EN 61757-1:2012 Fibre optic sensors Generic specification
BS EN 62040-5-3:2017 Uninterruptible power systems (UPS) DC output UPS. Performance and test requirements
BS EN 171000:2001 Harmonized system of quality assessment for electronic components. Generic specification. Filters using waveguide type dielectric resonators
BS EN 61338-2:2004 Waveguide type dielectric resonators Guidelines for oscillator and filter applications
BS 2011-2.1Z/AM:1977 Environmental testing. Tests Test Z/AM. Combined cold/low air pressure tests
10/30240248 DC : 0 BS EN 60862-1 - SURFACE ACOUSTIC WAVE (SAW) FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
BS EN 60939-1:2010 Passive filter units for electromagnetic interference suppression Generic specification
CEI EN 60512-11-11 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-11: CLIMATIC TESTS - TEST 11K: LOW AIR PRESSURE
PD IEC TR 60721-4-6:2002 Ship environmentClassification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068
BS EN 60749:1999 Semiconductor devices. Mechanical and climatic test methods
04/30112662 DC : DRAFT APR 2004 IEC 61810-7 ED.2 - ELECTROMECHANICAL ELEMENTARY RELAYS - PART 7: TEST AND MEASUREMENT PROCEDURES
BS EN 62884-1:2017 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators Basic methods for the measurement
DIN EN 138000 : 1997 GENERIC SPECIFICATION; FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (INDUCTORS FOR WHICH SAFETY TESTS ARE REQUIRED)
IEC 61020-4:1991 Electromechanical switches for use in electronic equipement - Part 4: Sectional specification for lever (toggle) switches
NF EN 60384-1 : 2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
06/30155911 DC : DRAFT SEP 2006 BS EN 140401-801 - DETAIL SPECIFICATION - FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25; 0,5; 1
BS EN 60384-1:2016 Fixed capacitors for use in electronic equipment Generic specification
05/30132097 DC : DRAFT JUNE 2005 IEC 60679-1 ED 3 - QUARTZ CRYSTAL CONTROLLED OSCILLATORS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
BS EN 61051-1:2008 Varistors for use in electronic equipment Generic specification
BS EN 140101:2008 Blank Detail Specification. Fixed low power film resistors
BS EN 61169-8:2007 Radio-frequency connectors Sectional specification. RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock. Characteristic impedance 50 ohms (type BNC)
05/30135445 DC : DRAFT JUN 2005 IEC 61169-8 - RADIO-FREQUENCY CONNECTORS - PART 8: SECTIONAL SPECIFICATION - RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 6,5 MM (0,256 IN) WITH BAYONET LOCK - CHARACTERISTICS IMPEDANCE 50 OHMS (TYPE BNC)
I.S. EN 60689:2009 MEASUREMENT AND TEST METHODS FOR TUNING FORK QUARTZ CRYSTAL UNITS IN THE RANGE FROM 10 KHZ TO 200 KHZ AND STANDARD VALUES
CEI EN 60689 : 2009 MEASUREMENT AND TEST METHODS FOR TUNING FORK QUARTZ CRYSTAL UNITS IN THE RANGE FROM 10 KHZ TO 200 KHZ AND STANDARD VALUES
I.S. EN 61757-1:2012 FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION (IEC 61757-1:2012 (EQV))
I.S. EN 61810-7:2006 ELECTROMECHANICAL ELEMENTARY RELAYS - PART 7: TEST AND MEASUREMENT PROCEDURES
OVE/ONORM EN 61051-1 : 2009 VARISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
I.S. EN 140402:2015 BLANK DETAIL SPECIFICATION: FIXED LOW POWER WIREWOUND SURFACE MOUNT (SMD) RESISTORS
I.S. EN 140402-801:2015 DETAIL SPECIFICATION: FIXED LOW POWER WIREWOUND SURFACE MOUNT (SMD) RESISTORS - RECTANGULAR - STABILITY CLASSES 0,5; 1; 2
I.S. EN 60068-2-39:2016 ENVIRONMENTAL TESTING - PART 2-39: TESTS - TESTS AND GUIDANCE: COMBINED TEMPERATURE OR TEMPERATURE AND HUMIDITY WITH LOW AIR PRESSURE TESTS
I.S. EN 62575-1:2016 RADIO FREQUENCY (RF) BULK ACOUSTIC WAVE (BAW) FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
I.S. EN 61248-1:1998 TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT - PART 1: GENERIC SPECIFICATION
I.S. EN 62246-1-1:2013 REED SWITCHES - PART 1-1: GENERIC SPECIFICATION - QUALITY ASSESSMENT (IEC 62246-1-1:2013 (EQV))
NF EN 60939-1 : 2011 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
IEC 61253-1:1993 Piezoelectric ceramic resonators - A specification in the IEC quality assessment system for electronic components (IECQ) - Part 1: Generic specification - Qualification approval
I.S. EN 61988-4:2007 PLASMA DISPLAY PANELS - PART 4: CLIMATIC AND MECHANICAL TESTING METHODS
I.S. EN 60939-1:2010 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
NF EN 60122-1 : 2003 QUARTZ CRYSTAL UNITS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
IEC 61747-5:1998 Liquid crystal and solid-state display devices - Part 5: Environmental, endurance and mechanical test methods
IEC 62246-1:2015 Reed switches - Part 1: Generic specification
EN 60512-9-3:2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-3: ENDURANCE TESTS - TEST 9C: MECHANICAL OPERATION (ENGAGING/SEPARATING) WITH ELECTRICAL LOAD
IEC 60384-1:2016 RLV Fixed capacitors for use in electronic equipment - Part 1: Generic specification
EN 61337-1:2004 Filters using waveguide type dielectric resonators - Part 1: Generic specification
EN 61019-1 : 2005 Surface acoustic wave (SAW) resonators - Part 1: Generic specification
EN 61010-2-012:2016 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment
EN 62246-1:2015 Reed switches - Part 1: Generic specification
EN 61300-2-20 : 1997 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-20: TESTS - CLIMATIC SEQUENCE
EN 140402-801:2015 Detail specification: Fixed low power wirewound surface mount (SMD) resistors - Rectangular - Stability classes 0,5; 1; 2
EN 196000 : 92 AMD 1 2001 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - GENERIC SPECIFICATION: ELECTROMECHANICAL SWITCHES
EN 134000:1994 Generic Specification: Variable capacitors (Qualification approval and capability approval)
EN 60939-1:2010 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
EN 60689:2009 Measurement and test methods for tuning fork quartz crystal units in the range from 10 kHz to 200 kHz and standard values
EN 140101:2008 Blank Detail Specification: Fixed low power film resistors
EN 61747-5:1998 Liquid crystal and solid-state display devices - Part 5: Environmental, endurance and mechanical test methods
EN 129000:1993/A1:1995 GENERIC SPECIFICATION - FIXED RF WOUND INDUCTORS
EN 62341-5:2009 Organic Light Emitting Diode (OLED) displays - Part 5: Environmental testing methods
EN 62040-5-3:2017 Uninterruptible power systems (UPS) - Part 5-3: DC output UPS - Performance and test requirements
EN 61051-1:2008 Varistors for use in electronic equipment - Part 1: Generic specification
EN 60738-1:2006/A1:2009 THERMISTORS - DIRECTLY HEATED POSITIVE TEMPERATURE COEFFICIENT - PART 1: GENERIC SPECIFICATION
EN 62604-1:2015 Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality - Part 1: Generic specification
EN 60115-2:2015 Fixed resistors for use in electronic equipment - Part 2: Sectional specification: Leaded fixed low power film resistors
EN 60068-2-40:1999 Environmental testing - Part 2: Tests - Test Z/AM: Combined cold/low air pressure tests
EN 140401:2009 Blank Detail Specification: Fixed low power film surface mount (SMD) resistors
EN 60068-2-41:1999 Environmental testing - Part 2: Tests - Test Z/BM: Combined dry heat/low air pressure tests
EN 140402:2015/A1:2016 BLANK DETAIL SPECIFICATION: FIXED LOW POWER WIREWOUND SURFACE MOUNT (SMD) RESISTORS
EN 60169-21:1997 Radio-frequency connectors - Part 21: Two types of radio-frequency connectors with inner diameter of outer conductor 9,5 mm (0,374 in) with different versions of screw coupling - Characteristic impendance 50 ohms (types SC-A and SC-B)
EN 181000:1994 Generic Specification: Fibre optic branching devices
EN 180000:1995 Generic specification: Fibre optic attenuators
EN 117000:1991 Generic Specification: Solid state all-or-nothing relays of assessed quality - Generic data and methods of test
DIN EN 60068-2-41:2000-08 ENVIRONMENTAL TESTING - PART 2: TESTS; TEST Z/BM: COMBINED DRY HEAT/LOW AIR PRESSURE TESTS
NF EN 62341-5 : 2010 ORGANIC LIGHT EMITTING DIODE (OLED) DISPLAYS - PART 5: ENVIRONMENTAL TESTING METHODS
BS EN 61337-1:2004 Filters using waveguide type dielectric resonators Generic specification
12/30268003 DC : 0 BS EN 60939-3 - PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 3: HARMONIZED STANDARD FOR PASSIVE FILTER UNITS FOR WHICH SAFETY TESTS ARE APPROPRIATE
PD IEC/TR 60721-4-4:2002 Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Stationary use at non-weatherprotected locations
I.S. EN 61051-1:2008 VARISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
13/30278343 DC : 0 BS EN 62246-1 - REED SWITCHES - PART 1: GENERIC SPECIFICATION
BS EN 60939-3:2015 Passive filter units for electromagnetic interference suppression Passive filter units for which safety tests are appropriate
06/30157868 DC : 0 BS EN 60393-1 - POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
12/30252220 DC : DRAFT MAR 2012 BS EN 62604-1 - SURFACE ACOUSTIC WAVE (SAW) AND BULK ACOUSTIC WAVE (BAW) DUPLEXERS - PART 1: GENERIC SPECIFICATION
03/101947 DC : DRAFT FEB 2003 IEC 60939-1 ED.2.0 - PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
PD IEC TR 60721-4-7:2001 Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Portable and non-stationary use
BS EN 62341-5:2009 Organic light emitting diode (OLED) displays Environmental testing methods
BS EN 60169-21:1997 Radio-frequency connectors Two types of radio-frequency connectors with inner diameter of outer conductor 9,5 mm (0,374 in) with different versions of screw coupling. Characteristic impedance 50 ohms (types SC-A and SC-B)
EN 60939-3:2015/AC:2016-04 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 3: PASSIVE FILTER UNITS FOR WHICH SAFETY TESTS ARE APPROPRIATE (IEC 60939-3:2015/COR1:2016)
03/103741 DC : DRAFT FEB 2003 IEC 61338-1 ED.1 - WAVEGUIDE TYPE DIELECTRIC RESONATORS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
BS EN 61169-1:2013 Radio-frequency connectors Generic specification. General requirements and measuring methods
BS EN 60115-8-1:2015 Fixed resistors for use in electronic equipment Blank detail specification: Fixed surface mount (SMD) low power film resistors for general electronic equipment, classification level G
BS CECC 41200:1979 Harmonized system of quality assurance for electronic components: sectional specification: power potentiometers
CSA E60384.1 : 2014 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
17/30336631 DC : 0 BS EN 62246-1-1 - REED SWITCHES - PART 1-1: DETAIL SPECIFICATION - QUALITY ASSESSMENT
14/30298027 DC : 0 BS EN 61069-4 ED 2.0 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 4: ASSESSMENT OF SYSTEM PERFORMANCE
NF EN 61020-1 : 2009 ELECTROMECHANICAL SWITCHES FOR USE IN ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
BS EN 60862-1:2015 Surface acoustic wave (SAW) filters of assessed quality Generic specification
IEC 61051-1:2007 Varistors for use in electronic equipment - Part 1: Generic specification
07/30164554 DC : 0 BS EN 62341-5 - ORGANIC LIGHT EMITTING DIODE DISPLAYS - PART 5: ENVIRONMENTAL TEST METHODS
BS EN 61300-2-29:1997 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests Tests. Low air pressure
PD IEC/TR 60721-4-1:2002 Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Storage
BS EN 61988-4:2007 Plasma display panels Climatic and mechanical testing methods
09/30207307 DC : 0 BS EN 60115-2 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION: FIXED LOW-POWER NON-WIREWOUND RESISTORS
BS EN 181000:1995 Harmonized system of quality assessment for electronic components. Generic specification. Fibre optic branching devices
I.S. EN 61337-1:2005 FILTERS USING WAVEGUIDE TYPE DIELECTRIC RESONATORS - PART 1: GENERIC SPECIFICATION
CEI EN 60393-1 : 2010 POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
CEI EN 61757-1 : 2013 FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION
DIN EN 60068-2-40:2000-08 ENVIRONMENTAL TESTING - PART 2: TESTS; TEST Z/AM: COMBINED COLD/LOW AIR PRESSURE TESTS
I.S. EN 62341-5:2009 ORGANIC LIGHT EMITTING DIODE (OLED) DISPLAYS - PART 5: ENVIRONMENTAL TESTING METHODS
IEC 60384-1 REDLINE : 5ED 2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
IEC 61020-3:1991 Electromechanical switches for use in electronic equipment - Part 3: Sectional specification for in-line package switches
IEC TR 60721-4-5:2001+AMD1:2003 CSV Classification of environmental conditions - Part 4-5: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Ground vehicle installations
NF EN 62246-1 : 2015 REED SWITCHES - PART 1: GENERIC SPECIFICATION
BS EN 138000:1997 Harmonized system of quality assessment for electronic components. Generic specification: fixed inductors for electromagnetic interference suppression (inductors for which safety tests are required)
BS ISO 15003:2006 Agricultural engineering. Electrical and electronic equipment. Testing resistance to environmental conditions
BS EN 60115-1 : 2011 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
I.S. EN 61019-1:2005 SURFACE ACOUSTIC WAVE (SAW) RESONATORS - PART 1: GENERIC SPECIFICATION
I.S. EN 62040-5-3:2017 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 5-3: DC OUTPUT UPS - PERFORMANCE AND TEST REQUIREMENTS
I.S. EN 60115-8-1:2015 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8-1: BLANK DETAIL SPECIFICATION: FIXED SURFACE MOUNT (SMD) LOW POWER FILM RESISTORS FOR GENERAL ELECTRONIC EQUIPMENT, CLASSIFICATION LEVEL G
EN 62884-1:2017 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 1: Basic methods for the measurement
I.S. EN 60115-8:2012 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT RESISTORS (IEC 60115-8:2009 (MOD))
I.S. EN 140401:2009 BLANK DETAIL SPECIFICATION: FIXED LOW POWER FILM SURFACE MOUNT (SMD) RESISTORS
CEI EN 60512-9-3 : 2012 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-3: ENDURANCE TESTS - TEST 9C: MECHANICAL OPERATION (ENGAGING/SEPARATING) WITH ELECTRICAL LOAD
EN IEC 62246-1-1:2018 Reed switches - Part 1-1: Generic specification - Blank detail specification
I.S. EN 60368-1:2000 PIEZOELECTRIC FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
I.S. EN 61747-5:1999 LIQUID CRYSTAL AND SOLID-STATE DISPLAY DEVICES - PART 5: ENVIRONMENTAL, ENDURANCE AND MECHANICAL TEST METHODS
I.S. EN 140100:2008 SECTIONAL SPECIFICATION: FIXED LOW POWER FILM RESISTORS
I.S. EN 60512-9-3:2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-3: ENDURANCE TESTS - TEST 9C: MECHANICAL OPERATION (ENGAGING/SEPARATING) WITH ELECTRICAL LOAD
IEC 61757:2018 Fibre optic sensors - Generic specification
IEC 61988-4-1:2015 Plasma display panels - Part 4-1: Environmental testing methods - Climatic and mechanical
I.S. EN 60512-11-11:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-11: CLIMATIC TESTS - TEST 11K: LOW AIR PRESSURE
IEC 61020-2:1991 Electromechanical switches for use in electronic equipment - Part 2: Sectional specification for rotary switches
IEC 60749:1996+AMD1:2000+AMD2:2001 CSV Semiconductor devices - Mechanical and climatic test methods
IEC 61338-2:2004 Waveguide type dielectric resonators - Part 2: Guidelines for oscillator and filter applications
VDE 0560-800 : 1998 GENERIC SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC A.C. CAPACITORS WITH NON-SOLID ELECTROLYTE FOR USE WITH MOTORS
DIN EN 137000 : 1998-03 GENERIC SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC A.C. CAPACITORS WITH NON-SOLID ELECTROLYTE FOR USE WITH MOTORS
BS 5772-5:1979 Specification for electromechanical components for electronic equipment: basic testing procedures and measuring methods Impact tests (free components), static load tests (fixed components), endurance tests and overload tests
BS CECC17000(1992) : 1992 AMD 9626 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - GENERIC SPECIFICATION - SOLID STATE ALL OR NOTHING RELAYS - GENERIC DATA AND METHODS OF TEST
IEC 60512-5:1992 Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 5: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests
CEI EN 60068-2-61 : 1997 ENVIRONMENTAL TESTING - PART 2: TEST METHODS TEST Z/ABDM: CLIMATIC SEQUENCE
IEC 61020-6:1991 Electromechanical switches for use in electronic equipment - Part 6: Sectional specification for sensitive switches
BS CECC 64000:1990 Harmonized system of quality assessment for electronic components: generic specification: film resistor networks
BS CECC 41300:1979 Harmonized system of quality assessment for electronic components. Sectional specification: low power single-turn rotary potentiometers
IEC 61261-1:1994 Piezoelectric ceramic filters for use in electronic equipment - A specification in the IEC quality assessment system for electronic components (IECQ) - Part 1: Generic specification - Qualification approval
BS EN 60115-2:2015 Fixed resistors for use in electronic equipment Sectional specification: Leaded fixed low power film resistors
11/30241337 DC : DRAFT JAN 2011 BS EN 61757-1 - FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION
06/30153438 DC : DRAFT JULY 2006 BS IEC 60539-1 ED.2 - DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORES - PART 1: GENERIC SPECIFICATION
CEI EN 60115-8-1 : 2016 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8-1: BLANK DETAIL SPECIFICATION: FIXED SURFACE MOUNT (SMD) LOW POWER FILM RESISTORS FOR GENERAL ELECTRONIC EQUIPMENT, CLASSIFICATION LEVEL G
EN 196110 : 2002 SECTIONAL SPECIFICATION - ROTARY SWITCHES - CAPABILITY APPROVAL
PD IEC/TR 60721-4-2:2002 Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Transportation
97/231700 DC : DRAFT DEC 1997 IEC 60115-1 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
BS EN 60068-2-41:2000 Environmental testing. Test methods Tests. Test Z/BM: Combined dry heat/low air pressure tests
BS EN 140000:1995 Harmonized system of quality assessment for electronic components. Generic specification: fixed resistors
BS EN 60512-11-11:2002 Connectors for electronic equipment. Tests and measurements. Climatic tests Test 11k. Low air pressure
BS EN 62246-1:2015 Reed switches Generic specification
13/30279156 DC : 0 BS EN 6101-2-012 ED.1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT
BS IEC 61988-4-1:2015 Plasma display panels Environmental testing methods. Climatic and mechanical
BS EN 61019-1:2005 Surface acoustic wave (SAW) resonators Generic specification
BS CECC 22120:1981 Harmonized system of quality assessment for electronic components: sectional specification: radio frequency coaxial connectors, series BNC
BS EN 140401-801 : 2007 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25; 0,5; 1
BS EN 140401-803 : 2007 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - CYLINDRICAL - STABILITY CLASSES 0,05; 0,1; 0,25; 0,5; 1; 2
I.S. EN 61337-2:2004 FILTERS USING WAVEGUIDE TYPE DIELECTRIC RESONATORS - PART 2: GUIDANCE FOR USE
13/30287884 DC : 0 BS EN 61988-4-1 ED 1.0 - PLASMA DISPLAY PANELS - PART 4-1: ENVIRONMENTAL TESTING METHODS - CLIMATIC AND MECHANICAL
09/30209389 DC : 0 BS EN 60115-8-1 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8-1: BLANK DETAIL SPECIFICATION - FIXED CHIP RESISTORS - ASSESSMENT LEVEL E
CEI EN 60368-1 : 2006 PIEZOELECTRIC FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
BS EN 61338-1:2005 Waveguide type dielectric resonators Generic specification
I.S. EN 60115-2:2015 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION: LEADED FIXED LOW POWER FILM RESISTORS
11/30255443 DC : 0 BS EN 60068-2-39 - ENVIRONMENTAL TESTING - PART 2-39: TESTS AND GUIDANCE: COMBINED TEMPERATURE OR TEMPERATURE AND HUMIDITY WITH LOW AIR PRESSURE TESTS
BS EN 60068-2-40:2000 Environmental testing. Test methods Test Z/AM. Combined cold/low air pressure tests
CSA C22.2 No. 61010-2-012 : 2017 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT
BIS IS/IEC 60862-1 : 2003 SURFACE ACOUSTIC WAVE (SAW) FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
06/30155922 DC : 0 BS EN 140100 - SECTIONAL SPECIFICATION - FIXED LOW POWER FILM RESISTORS
10/30234803 DC : 0 BS EN 61169-1 ED.2 - RADIO FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS
06/30155905 DC : DRAFT SEP 2006 BS EN 140401-803 - DETAIL SPECIFICATION - FIXED LOW POWER FILM SMD RESISTORS - CYLINDRICAL - STABILITY CLASSES 0,05; 0,1; 0,25; 0,5; 1; 2
I.S. EN 138000:1998 FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (INDUCTORS FOR WHICH SAFETY TESTS ARE REQUIRED) (GENERIC SPECIFICATION)
BS EN 62246-1-1:2013 Reed switches Generic specification. Quality assessment
14/30317306 DC : 0 BS EN 60115-8-1:2014+A1 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8-1: BLANK DETAIL SPECIFICATION: FIXED SURFACE MOUNT (SMD) LOW POWER FILM RESISTORS FOR GENERAL ELECTRONIC EQUIPMENT, CLASSIFICATION LEVEL G
BS EN 60368-1:2000 Piezoelectric filters Generic specification
96/201315 DC : DRAFT JAN 1996 EN 160300 - PROPOSAL FOR A SECTIONAL SPECIFICATION FOR POWER CONVERSION UNITS OF ASSESSED QUALITY FOR CAPABILITY APPROVAL AS MODULAR ELECTRONIC UNITS
CEI EN 62884-1 : 1ED 2018 MEASUREMENT TECHNIQUES OF PIEZOELECTRIC, DIELECTRIC AND ELECTROSTATIC OSCILLATORS - PART 1: BASIC METHODS FOR THE MEASUREMENT
BS EN 60512-9-3:2011 Connectors for electronic equipment. Tests and measurements Endurance tests. Test 9c. Mechanical operation (engaging/separating) with electrical load
UNE-EN 61020-1:2011 Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification
NF EN 60938-1 : 2008 AMD 1 2008 FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
IEC 61338-1-2:1998 Waveguide type dielectric resonators - Part 1-2: General information and test conditions - Test conditions
I.S. EN 140101:2008 BLANK DETAIL SPECIFICATION: FIXED LOW POWER FILM RESISTORS
BS EN 167000:1993 Harmonized system of quality assessment for electronic components. Generic specification: piezoelectric filters
I.S. EN 140401-804:2011 DETAIL SPECIFICATION: FIXED LOW POWER FILM HIGH STABILITY SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25
BS EN 140402 : 2015 BLANK DETAIL SPECIFICATION: FIXED LOW POWER WIREWOUND SURFACE MOUNT (SMD) RESISTORS
I.S. EN 60939-3:2015 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 3: PASSIVE FILTER UNITS FOR WHICH SAFETY TESTS ARE APPROPRIATE
I.S. EN 140101-806:2009 DETAIL SPECIFICATION: FIXED LOW POWER FILM RESISTORS - METAL FILM RESISTORS ON HIGH GRADE CERAMIC, CONFORMAL COATED OR MOLDED, AXIAL OR PREFORMED LEADS
I.S. EN 60749-2:2002 SEMICONDUCTOR DEVICES - MECHANICAL AND CLIMATIC TEST METHODS - PART 2: LOW AIR PRESSURE
I.S. EN 60384-1:2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
I.S. EN 62246-1:2015 REED SWITCHES - PART 1: GENERIC SPECIFICATION
I.S. EN 61338-1:2005 WAVEGUIDE TYPE DIELECTRIC RESONATORS - PART 1: GENERIC SPECIFICATION
IEC TR 60721-4-6:2001+AMD1:2003 CSV Classification of environmental conditions - Part 4-6: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Ship environment
BS EN 140401:2009 Blank Detail Specification. Fixed low power film surface mount (SMD) resistors
BS EN 140401-804 : 2011 DETAIL SPECIFICATION: FIXED LOW POWER FILM HIGH STABILITY SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25
I.S. EN 133000:1998 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (GENERIC SPECIFICATION)
IEC 62679-4-2:2016 Electronic paper displays - Part 4-2: Environmental test methods
IEC TR 60721-4-4:2001+AMD1:2003 CSV Classification of environmental conditions - Part 4-4: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Stationary use at non-weatherprotected locations
I.S. EN 62884-1:2017 MEASUREMENT TECHNIQUES OF PIEZOELECTRIC, DIELECTRIC AND ELECTROSTATIC OSCILLATORS - PART 1: BASIC METHODS FOR THE MEASUREMENT
CEI EN 60068-2-40 : 2000 ENVIRONMENTAL TESTING - PART 2: TESTS - TEST Z/AM: COMBINED COLD/LOW AIR PRESSURE TESTS
CEI EN 61300-2-29 : 1997 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-29: TESTS - LOW AIR PRESSURE
I.S. EN 60393-1:2009 POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
I.S. EN 61300-2-20:1998 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-20: TESTS - CLIMATIC SEQUENCE
NF EN 140402-801 : 2005 DETAIL SPECIFICATION: FIXED LOW POWER WIRE-WOUND SURFACE MOUNT (SMD) RESISTORS - RECTANGULAR - STABILITY CLASSES 0,5, 1, 2
IEC 60115-1:2008 Fixed resistors for use in electronic equipment - Part 1: Generic specification
IEC TR 60721-4-1:2001+AMD1:2003 CSV Classification of environmental conditions - Part 4-1: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Storage
IEC TR 60721-4-2:2001+AMD1:2003 CSV Classification of environmental conditions - Part 4-2: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Transportation
IEC 60115-8-1:2014 Fixed resistors for use in electronic equipment - Part 8-1: Blank detail specification: Fixed surface mount (SMD) low power film resistors for general electronic equipment, classification level G
I.S. EN 60938-1:1999 FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
IEC 60393-1:2008 Potentiometers for use in electronic equipment - Part 1: Generic specification
I.S. EN 60068-2-41:1999 ENVIRONMENTAL TESTING - PART 2: TESTS - TEST Z/BM: COMBINED DRY HEAT/LOW AIR PRESSURE TESTS
IEC 60512-7:1993 Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 7: Mechanical operating tests and sealing tests
I.S. EN 60115-1:2011 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION (IEC 60115-1:2008, MODIFIED)
EN 140200 : 1996 AMD 1 2001 FIXED POWER RESISTORS (SECTIONAL SPECIFICATION)
IEC 60368-1:2000+AMD1:2004 CSV Piezoelectric filters of assessed quality - Part 1: Genericspecification
IEC 61300-2-29:1995 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-29: Tests - Low air pressure
IEC 61169-1:2013 Radio frequency connectors - Part 1: Generic specification - General requirements and measuring methods
IEC 62341-5:2009 Organic light emitting diode (OLED) displays - Part 5: Environmental testing methods
IEC 62604-1:2015 Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality - Part 1: Generic specification
IEC 61337-1:2004 Filters using waveguide type dielectric resonators - Part 1: Generic specification
IEC 62575-1:2015 Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality - Part 1: Generic specification
EN 140401-804:2011/A1:2013 DETAIL SPECIFICATION: FIXED LOW POWER FILM HIGH STABILITY SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25
EN 61007:1997 Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures
BS 5772-7:1981 Specification for electromechanical components for electronic equipment: basic testing procedures and measuring methods Mechanical operating tests and sealing tests
02/203178 DC : 0 PREN 140101-806 - DETAIL SPECIFICATION - FIXED LOW POWER NON-WIRE WOUND RESISTORS - METAL FILM RESISTORS ON HIGH GRADE CERAMIC, CONFORMAL COATED OR MOLDED, AXIAL OR PREFORMED LEADS - ASSESSMENT LEVEL Z - VERSION A: WITH 100-%-TEST - VERSION E: WITH FAILURE RATE LEVEL AND 100-%-TEST - STABILITY CLASSES 0,05; 0,1; 0,25; 0,5; 1; 2
BS EN 62604-1:2015 Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality Generic specification
BS EN 60689:2009 Measurement and test methods for tuning fork quartz crystal units in the range from 10 kHz to 200 kHz and standard values
05/30137416 DC : 0
BS EN 140100:2008 Sectional specification. Fixed low power film resistors
07/30149142 DC : 0 BS IEC 60115-1 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
NF EN 61051-1 : 2013 VARISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
BS EN 60115-8:2012 Fixed resistors for use in electronic equipment Sectional specification. Fixed surface mount resistors
I.S. EN 143000:1994 THERMISTORS (GENERIC SPECIFICATION)
BS CECC 40100:1981 Harmonized system of quality assessment for electronic components: sectional specification: fixed low power non-wirewound resistors
03/103740 DC : DRAFT FEB 2003 IEC 61337-1 ED.1 - FILTERS USING WAVEGUIDE TYPE DIELECTRIC RESONATORS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
PD IEC TR 60721-4-5:2002 Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Ground vehicle installations
CEI EN 60169-21 : 1998 RADIO-FREQUENCY CONNECTORS - PART 21: TWO TYPES OF RADIO-FREQUENCY CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 9,5 MM (0,374 IN) WITH DIFFERENT VERSIONS OF SCREW COUPLING CHARACTERISTIC IMPEDANCE 50 OHMS (TYPES SC-A AND SC-B)
10/30237986 DC : 0 BS EN 140401-804 - DETAIL SPECIFICATION: FIXED LOW POWER FILM HIGH STABILITY SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25
BS EN 60738-1 : 2006 THERMISTORS - DIRECTLY HEATED POSITIVE TEMPERATURE COEFFICIENT - PART 1: GENERIC SPECIFICATION
14/30280850 DC : 0 BS EN 60384-1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
11/30252977 DC : 0 BS EN 61747-10-2 - LIQUID CRYSTAL DISPLAY DEVICES - PART 10-2: ENVIRONMENTAL, ENDURANCE AND MECHANICAL TEST METHODS - ENVIRONMENTAL AND ENDURANCE
08/30186808 DC : DRAFT JULY 2008 BS EN 140401 - BLANK DETAIL SPECIFICATION - FIXED LOW POWER NON-WIRE-WOUND SURFACE MOUNT (SMD) RESISTORS
BS CECC 22000:1980 Harmonized system of quality assessment for electronic components: generic specification: radio frequency coaxial connectors
BS EN 140401-802 : 2007 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 1; 2
10/30234015 DC : 0 BS EN 62246-1-1 ED.1 - REED SWITCHES - PART 1-1: QUALITY ASSESSMENT SPECIFICATION
13/30264600 DC : 0 BS EN 60747-14-8 ED 1.0 - SEMICONDUCTOR DEVICES - PART 14-8: SEMICONDUCTOR SENSORS - CAPACITIVE DEGRADATION SENSOR OF LIQUID
BS IEC 62679-4-2:2016 Electronic paper displays Environmental test methods
CEI EN 61051-1 : 2010 VARISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
BS EN 61007:1997 Transformers and inductors for use in electronic and telecommunication equipment. Measuring methods and test procedures
BS EN 61248-1:1997 Transformers and inductors for use in electronic and telecommunication equipment Generic specification
BS EN 133000:1997 Harmonized system of quality assessment for electronic components. Generic specification: passive filter units for electromagnetic interference suppression
BS EN IEC 62246-1-1:2018 Reed switches Generic specification. Blank detail specification
06/30149145 DC : DRAFT OCT 2006 IEC 60384-1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
BS EN 61337-2:2004 Filters using waveguide type dielectric resonators Guide for use
BS EN 130000:1994 Harmonized system of quality assessment for electronic components. Generic specification: fixed capacitors
BS EN 60122-1 : 2002 QUARTZ CRYSTAL UNITS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
BS EN 180000:1996 Harmonized system of quality assessment for electronic components. Generic specification: Fibre optic attenuators
PD 6521:1988 Summaries of test methods for environmental testing of electrotechnical products
08/30193881 DC : 0 BS EN 60939-1 ED.3 - PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
BS EN 60749-2:2002 Semiconductor devices. Mechanical and climatic test methods Low air pressure
BS EN 61810-7:2006 Electromechanical elementary relays Test and measurement procedures
BS EN 61010-2-012:2016 Safety requirements for electrical equipment for measurement, control and laboratory use Particular requirements for climatic and environmental testing and other temperature conditioning equipment
I.S. EN 60738-1:2006 THERMISTORS - DIRECTLY HEATED POSITIVE TEMPERATURE COEFFICIENT - PART 1: GENERIC SPECIFICATION
I.S. EN 61010-2-012:2016 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT
I.S. EN IEC 62246-1-1:2018 REED SWITCHES - PART 1-1: GENERIC SPECIFICATION - BLANK DETAIL SPECIFICATION
I.S. EN 196110:2002 SECTIONAL SPECIFICATION: ROTARY SWITCHES - CAPABILITY APPROVAL
I.S. EN 134000:1994 GENERIC SPECIFICATION: VARIABLE CAPACITORS (QUALIFICATION APPROVAL AND CAPABILITY APPROVAL)
I.S. CECC 33000:1994 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (GENERIC SPECIFICATION)
BS 2011-2.1Z/BM:1977 Environmental testing. Tests Test Z/BM. Combined dry heat/low air pressure tests
CEI EN 61300-2-20 : 1997 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-20: TESTS - CLIMATIC SEQUENCE
CEI EN 62246-1-1 : 2014 REED SWITCHES - PART 1-1: GENERIC SPECIFICATION - QUALITY ASSESSMENT
EN 140401-802:2007/A3:2017 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 1; 2
EN 60384-1:2016 Fixed capacitors for use in electronic equipment - Part 1: Generic specification
CEI EN 61810-7 : 2006 ELECTROMECHANICAL ELEMENTARY RELAYS - PART 7: TEST AND MEASUREMENT PROCEDURES
I.S. EN 61020-1:2009 ELECTROMECHANICAL SWITCHES FOR USE IN ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
IEC 61337-1-2:1999 Filters using waveguide type dielectric resonators - Part 1-2: Test conditions
IEC 61747-10-2:2014 Liquid crystal display devices - Part 10-2: Environmental, endurance and mechanical test methods - Environmental and endurance
I.S. EN 140401-803:2007 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - CYLINDRICAL - STABILITY CLASSES 0,05; 0,1; 0,25; 0,5; 1; 2
I.S. EN 140401-802:2007 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 1; 2
I.S. EN 61169-1:2013 RADIO-FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS
IEC 61020-5:1991 Electromechanical switches for use in electronic equipment - Part 5: Sectional specification for pushbutton switches
IEC 60068-2-61:1991 Environmental testing - Part 2-61: Test methods - Test Z/ABDM:Climatic sequence
IEC TR 60721-4-3:2001+AMD1:2003 CSV Classification of environmental conditions - Part 4-3: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Stationary use at weatherprotected locations
IEC 61007:1994 Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures
IEC 60115-2:2014 Fixed resistors for use in electronic equipment - Part 2: Sectional specification: Leaded fixed low power film resistors
EN 61169-1:2013/AC:2016-02 RADIO-FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS (IEC 61169-1:2013)
EN 60938-1:1999/A1:2007 FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
EN 60115-1:2011/A11:2015 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
IEC 60738-1:2006+AMD1:2009 CSV Thermistors - Directly heated positive temperature coefficient -Part 1: Generic specification
IEC 60938-1:1999+AMD1:2006 CSV Fixed inductors for electromagnetic interference suppression - Part 1: Generic specification
IEC 60689:2008 Measurement and test methods for tuning fork quartz crystal units in the range from 10 kHz to 200 kHz and standard values
IEC 60068-2-39:2015 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
IEC 60384-1:2016 Fixed capacitors for use in electronic equipment - Part 1: Generic specification
IEC 62040-5-3:2016 Uninterruptible power systems (UPS) - Part 5-3: DC output UPS - Performance and test requirements
IEC 61020-1:2009 Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification
IEC 60939-1:2010 Passive filter units for electromagnetic interference suppression - Part 1: Generic specification
IEC 61747-1:1998+AMD1:2003 CSV Liquid crystal and solid-state display devices - Part 1: Generic specification
IEC 60512-11-11:2002 Connectors for electronic equipment - Tests and measurements - Part 11-11: Climatic tests - Test 11k: Low air pressure
IEC 60862-1:2015 Surface acoustic wave (SAW) filters of assessed quality - Part 1: Generic specification
IEC 61169-8:2007 Radio-frequency connectors - Part 8: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 50 Ω (type BNC)
IEC 61248-1:1996 Transformers and inductors for use in electronic and telecommunication equipment - Part 1: Generic specification
IEC 61019-1:2004 Surface acoustic wave (SAW) resonators - Part 1: Generic specification
IEC 61338-1:2004 Waveguide type dielectric resonators - Part 1: Generic specification
BS EN 140402-801:2015 Detail specification: Fixed low power wirewound surface mount (SMD) resistors. Rectangular. Stability classes 0,5; 1; 2
IEC 61757-1:2012 Fibre optic sensors - Part 1: Generic specification
IEC 61988-4:2007 Plasma display panels - Part 4: Climatic and mechanical testing methods
IEC 60512-9-3:2011 Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging and separating) with electrical load
IEC 61337-2:2004 Filters using waveguide type dielectric resonators - Part 2: Guidance for use
EN 61337-2:2004 Filters using waveguide type dielectric resonators - Part 2: Guidance for use
EN 60862-1:2015 Surface acoustic wave (SAW) filters of assessed quality - Part 1: Generic specification
EN 180000 : 1995 GENERIC SPECIFICATION: FIBRE OPTIC ATTENUATORS
I.S. EN 61007:1998 TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT - MEASURING METHODS AND TEST PROCEDURES
CEI EN 61988-4 : 2008 PLASMA DISPLAY PANELS - PART 4: CLIMATIC AND MECHANICAL TESTING METHODS
08/30193715 DC : 0 BS EN 62246-1 ED.2 - REED SWITCHES - PART 1: GENERIC SPECIFICATION
BS CECC 43000(1982) : AMD 7315 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: GENERIC SPECIFICATION: DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS
11/30243576 DC : DRAFT FEB 2011 BS EN 62643-1 - ELECTROSTATIC MICRO ELECTRO MECHANICAL SYSTEMS (MEMS) OSCILLATORS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
BS EN 60393-1:2009 Potentiometers for use in electronic equipment Generic specification
CEI EN 60115-2 : 2016 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION: LEADED FIXED LOW POWER FILM RESISTORS
CEI EN 140401 : 2009 BLANK DETAIL SPECIFICATION: FIXED LOW POWER FILM SURFACE MOUNT (SMD) RESISTORS
CEI EN 138000 : 1996 GENERIC SPECIFICATION: FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (INDUCTORS FOR WHICH SAFETY TESTS ARE REQUIRED)
CEI EN 60115-8 : 2013 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT RESISTORS
BS EN 61020-1:2009 Electromechanical switches for use in electrical and electronic equipment Generic specification
08/30188248 DC : DRAFT AUG 2008 BS EN 60512-9-3 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-3: ENDURANCE TESTS - TEST 9C - MECHANICAL OPERATION (ENGAGING/SEPARATING) WITH ELECTRICAL LOAD
13/30264596 DC : 0 BS EN 60747-14-7 ED 1.0 - SEMICONDUCTOR DEVICES - PART 14-7: SEMICONDUCTOR SENSORS - FLOW METER
BS EN 61300-2-20:1997 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests Climatic sequence
CEI EN 60749-2 : 2004 SEMICONDUCTOR DEVICES - MECHANICAL AND CLIMATIC TEST METHODS - PART 2: LOW AIR PRESSURE
NF EN 60068 2-61 : 1994 ENVIRONMENTAL TESTING - PART 2: TEST METHODS - TEST Z/ABDM: CLIMATIC SEQUENCE
I.S. EN 60169-21:1999 RADIO-FREQUENCY CONNECTORS - PART 21: TWO TYPES OF RADIO-FREQUENCY CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 9,5 MM (0,374 IN) WITH DIFFERENT VERSIONS OF SCREW COUPLING - CHARACTERISTIC IMPEDANCE 50 OHMS (TYPES SC-A AND SC-B)
05/30129971 DC : DRAFT FEB 2005 EN 140402-801 - DETAIL SPECIFICATION - FIXED LOW POWER WIRE-WOUND SURFACE MOUNT (SMD) RESISTORS - RECTANGULAR - STABILITY CLASSES 0,5; 1; 2
04/30063259 DC : DRAFT JUL 2004
BS CECC 40200:1981 Harmonized system of quality assessment for electronic components: sectional specification: fixed power resistors
BS EN 60068-2-39:2016 Environmental testing Tests. Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
NF EN 129000 : 2014 AMD 1 2014 GENERIC SPECIFICATION: FIXED RF WOUND INDUCTORS
I.S. EN 62604-1:2015 SURFACE ACOUSTIC WAVE (SAW) AND BULK ACOUSTIC WAVE (BAW) DUPLEXERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
I.S. EN 181000:1994 FIBRE OPTIC BRANCHING DEVICES (GENERIC SPECIFICATION)
IEC 60115-8:2009 Fixed resistors for use in electronic equipment - Part 8: Sectional specification - Fixed surface mount resistors
BS EN 140101-806 : 2008 DETAIL SPECIFICATION: FIXED LOW POWER FILM RESISTORS - METAL FILM RESISTORS ON HIGH GRADE CERAMIC, CONFORMAL COATED OR MOLDED, AXIAL OR PREFORMED LEADS
I.S. EN 60122-1:2002 AMD 1 2018 QUARTZ CRYSTAL UNITS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
CEI EN 60068-2-41 : 2000 ENVIRONMENTAL TESTING - PART 2: TESTS - TEST Z/BM: COMBINED DRY HEAT/LOW AIR PRESSURE TESTS
I.S. EN 60862-1:2015 SURFACE ACOUSTIC WAVE (SAW) FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
CEI EN 60122-1 : 2004 QUARTZ CRYSTAL UNITS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
I.S. EN 61169-8:2007 RADIO-FREQUENCY CONNECTORS - PART 8: SECTIONAL SPECIFICATION - RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 6,5 MM (0,256 IN) WITH BAYONET LOCK - CHARACTERISTICS IMPEDANCE 50 OHMS (TYPE BNC)
BIS IS 15934-5 : 2011 LIQUID CRYSTAL AND SOLID-STATE DISPLAY DEVICES - PART 5: ENVIRONMENTAL, ENDURANCE AND MECHANICAL TEST METHODS
CEI EN 60939-1 : 2011 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
IEC 62884-1:2017 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 1: Basic methods for the measurement
IEC TR 60721-4-7:2001+AMD1:2003 CSV Classification of environmental conditions - Part 4-7: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Portable and non-stationary use
I.S. EN 140401-801:2007 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25; 0,5; 1
IEC 60300-3-5:2001 Dependability management - Part 3-5: Application guide - Reliability test conditions and statistical test principles
I.S. EN 60068-2-40:1999 ENVIRONMENTAL TESTING - PART 2: TESTS - TEST Z/AM: COMBINED COLD/LOW AIR PRESSURE TESTS
IEC 61019-1-2:1993 Surface acoustic wave (SAW) resonators - Part 1: General information, standard values and test conditions - Section 2: Test conditions
I.S. CECC 86000:1993 CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES - PART 1: REQUIREMENTS, TEST METHODS AND QUALIFICATION APPROVAL PROCEDURES (GENERIC SPECIFICATION)
I.S. EN 116000-3:1998 GENERIC SPECIFICATION: ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 3: TEST AND MEASUREMENT PROCEDURES
EN 140401-803 : 2007 AMD 3 2017 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - CYLINDRICAL - STABILITY CLASSES 0,05; 0,1; 0,25; 0,5; 1; 2
EN 140101-806 : 2008 COR 2014 DETAIL SPECIFICATION: FIXED LOW POWER FILM RESISTORS - METAL FILM RESISTORS ON HIGH GRADE CERAMIC, CONFORMAL COATED OR MOLDED, AXIAL OR PREFORMED LEADS
EN 140401-801:2007/A1:2013 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25; 0,5; 1
IEC 61810-7:2006 Electromechanical elementary relays - Part 7: Test and measurement procedures
IEC 60749-2:2002 Semiconductor devices - Mechanical and climatic test methods - Part 2: Low air pressure
EN 61338-2:2004 Waveguide type dielectric resonators - Part 2: Guidelines for oscillator and filter applications
EN 60749-2:2002 Semiconductor devices - Mechanical and climatic test methods - Part 2: Low air pressure
EN 61300-2-29:1997 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-29: Tests - Low air pressure
EN 61169-8:2007 Radio-frequency connectors - Part 8: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 50 ohms (type BNC)
EN 61757-1 : 2012 FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION (IEC 61757-1:2012)
EN 119000 : 1996 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: GENERIC SPECIFICATION: DRY AND MERCURY WETTED REED CONTACT UNITS
EN 60068-2-39:2016 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
EN 61248-1 : 1997 Transformers and inductors for use in electronic and telecommunication equipment - Part 1: Generic specification
EN 60122-1:2002/A1:2018 QUARTZ CRYSTAL UNITS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION (IEC 60122-1:2002/A1:2017)
EN 60368-1:2000/A1:2004 PIEZOELECTRIC FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
EN 60115-8:2012 Fixed resistors for use in electronic equipment - Part 8: Sectional specification - Fixed surface mount resistors
EN 62246-1-1:2013 Reed switches - Part 1-1: Generic specification - Quality assessment
EN 61810-7:2006 Electromechanical elementary relays - Part 7: Test and measurement procedures
EN 62575-1:2016 Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality - Part 1: Generic specification
EN 143000 : 1991 THERMISTORS (GENERIC SPECIFICATION)
EN 116000-3 : 1996 GENERIC SPECIFICATION: ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 3: TEST AND MEASUREMENT PROCEDURES
EN 137000:1995 Generic Specification: Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for use with motors
EN 60115-8-1:2015 Fixed resistors for use in electronic equipment - Part 8-1: Blank detail specification: Fixed surface mount (SMD) low power film resistors for general electronic equipment, classification level G
EN 140100:2008 Sectional Specification: Fixed low power film resistors
EN 61338-1:2005 Waveguide type dielectric resonators - Part 1: Generic specification
EN 60393-1:2009 Potentiometers for use in electronic equipment - Part 1: Generic specification
EN 60512-11-11:2002 Connectors for electronic equipment - Tests and measurements - Part 11-11: Climatic tests - Test 11k: Low air pressure
EN 60749 : 99 AMD 2 2001 SEMICONDUCTOR DEVICES - MECHANICAL AND CLIMATIC TEST METHODS
EN 61020-1:2009 Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification
EN 140000 : 1993 GENERIC SPECIFICATION: FIXED RESISTORS
EN 61988-4 : 2007 PLASMA DISPLAY PANELS - PART 4: CLIMATIC AND MECHANICAL TESTING METHODS
BS CECC 30000:1992 Harmonized system of quality assessment for electronic components. Generic specification: fixed capacitors
BS CECC 30000:1984 Harmonized system of quality assessment for electronic components: generic specification: fixed capacitors

View more information
US$23.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.