IEC 60282-1:2009+AMD1:2014 CSV
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
High-voltage fuses - Part 1: Current-limiting fuses
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
09-12-2022
English - French
07-22-2014
FOREWORD
1 General
2 Normal and special service conditions
3 Terms and definitions
4 Ratings and characteristics
5 Design, construction and performance
6 Type tests
7 Special tests
8 Routine tests
9 Application guide
Annex A (normative) - Method of drawing the envelope of the
prospective and transient recovery voltage of a
circuit and determining the representative parameters
Annex B (informative) - Reasons which led to the choice of
TRV values for Test Duties 1, 2 and 3
Annex C (informative) - Preferred arrangements for
temperature-rise tests of oil-tight
fuse-links for switchgear
Annex D (informative) - Types and dimensions of current-limiting
fuse-links specified in existing national standards
Annex E (normative) - Requirements for certain types of
fuse-links intended for use at surrounding temperatures
above 40 degrees C
Annex F (informative) - Practical guidelines for thermal
derating of current-limiting fuses
Annex G (informative) - Criteria for determining I[t]
testing validity
Bibliography
IEC 60282-1:2009+A1:2014 applies to all types of high-voltage current-limiting fuses designed for use outdoors or indoors on alternating current systems of 50 Hz and 60 Hz and of rated voltages exceeding 1 000 V. The changes introduced by this new edition are only editorial. This consolidated version consists of the seventh edition (2009) and its amendment 1 (2014). Therefore, no need to order amendment in addition to this publication.
Committee |
TC 32/SC 32A
|
DevelopmentNote |
Supersedes 94/204166 DC. (07/2004) Stability Date: 2019. (09/2017)
|
DocumentType |
Standard
|
Pages |
339
|
PublisherName |
International Electrotechnical Committee
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
NBN EN 60282-1 : 2010 AMD 1 2014 | Identical |
NF EN 60282-1 : 2010 AMD 1 2014 | Identical |
NEN EN IEC 60282-1 : 2010 AMD 1 2014 | Identical |
I.S. EN 60282-1:2009 | Identical |
SANS 60282-1 : 4.01ED 2014 | Identical |
DIN EN 60282-1 : 2015 | Identical |
VDE 0670-4 : 2015 | Identical |
IS 9385 : Part 1 : 2018 | Identical |
UNE-EN 60282-1:2011 | Identical |
BS EN 60282-1 : 2009 | Identical |
EN 60282-1:2009/A1:2014 | Identical |
CEI 32-3 : 3ED 1991 | Identical |
UNE 21120-1:1993 | Identical |
SN EN 60282-1 : 2006 | Identical |
PN EN 60282-1 : 2010 AMD 1 2015 | Identical |
CEI EN 60282-1 : 2011 | Identical |
NEN 10282-1 : AMD 1 96 | Similar to |
CEI EN 60644 : 2011 | SPECIFICATION FOR HIGH-VOLTAGE FUSE-LINKS FOR MOTOR CIRCUIT APPLICATIONS |
BS EN 62271-107:2012 | High-voltage switchgear and controlgear Alternating current fused circuit-switchers for rated voltages above 1 kV up to and including 52 kV |
DIN 57660-105 : 1984 | HIGH-VOLTAGE MOTOR STARTERS; PART 1: DIRECT-ON-LINE (FULL VOLTAGE) A.C. STARTERS |
BS EN 62475:2010 | High-current test techniques. Definitions and requirements for test currents and measuring systems |
BS EN 60644:2009 | Specification for high-voltage fuse-links for motor circuit application |
BS EN 60076-13:2006 | Power transformers Self-protected liquid-filled transformers |
BS EN 62271-106:2011 | High-voltage switchgear and controlgear Alternating current contactors, contactor-based controllers and motor-starters |
09/30187488 DC : DRAFT AUG 2009 | BS EN 60076-16 - POWER TRANSFORMERS - PART 16: TRANSFORMERS FOR WIND TURBINES APPLICATION |
NF EN 60644 : 2010 | SPECIFICATION FOR HIGH-VOLTAGE FUSE-LINKS FOR MOTOR CIRCUIT APPLICATION |
I.S. EN 62271-106:2011 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 106: ALTERNATING CURRENT CONTACTORS, CONTACTOR-BASED CONTROLLERS AND MOTOR-STARTERS (IEC 62271-106:2011 (EQV)) |
17/30368300 DC : 0 | BS EN 62271-107 ED.3.0 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 107: ALTERNATING CURRENT FUSED CIRCUIT-SWITCHERS FOR RATED VOLTAGES ABOVE 1 KV UP TO AND INCLUDING 52 KV |
IEEE DRAFT C37.48 : D5 NOV 96 | GUIDE FOR APPLICATION, OPERATION AND MAINTENANCE OF HIGH-VOLTAGE FUSES, DISTRIBUTION ENCLOSED SINGLE-POLE AIR SWITCHES, FUSE DISCONNECTING SWITCHES, AND ACCESSORIES |
CEI EN 62475 : 2011 | HIGH-CURRENT TEST TECHNIQUES - DEFINITIONS AND REQUIREMENTS FOR TEST CURRENTS AND MEASURING SYSTEMS |
I.S. EN 62271-105:2012 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 105: ALTERNATING CURRENT SWITCH-FUSE COMBINATIONS FOR RATED VOLTAGES ABOVE 1 KV UP TO AND INCLUDING 52 KV (IEC 62271-105:2012 (EQV)) |
IEEE C37.40-2003 | IEEE Standard Service Conditions and Definitions for High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories |
IEEE DRAFT C37.48.1 : D13 2000 | DRAFT GUIDE FOR THE OPERATION, CLASSIFICATION, APPLICATION AND COORDINATION OF CURRENT-LIMITING FUSES WITH RATED VOLTAGES 1-38 KV |
I.S. EN 61642:1999 | INDUSTRIAL A.C. NETWORKS AFFECTED BY HARMONICS - APPLICATION OF FILTERS AND SHUNT CAPACITORS |
NF EN 60076-13 : 2007 | POWER TRANSFORMERS - PART 13: SELF-PROTECTED LIQUID-FILLED TRANSFORMERS |
EN 60077-5:2003 | Railway applications - Electrotechnical equipment for rolling stock - Part 5: Electrotechnical components - Rules for HV fuses |
IEEE C37.48.1-2002 | IEEE Guide for the Operation, Classification, Application, and Coordination of Current-Limiting Fuses with Rated Voltages 1-38kV |
EN 61642:1997 | Industrial a.c. networks affected by harmonics - Application of filters and shunt capacitors |
NF EN 62271-107 : 2013 | HIGH VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 107: ALTERNATING CURRENT FUSED CIRCUIT-SWITCHERS FOR RATED VOLTAGES ABOVE 1 KV UP TO AND INCLUDING 52 KV |
EN 60644:2009 | Specification for high-voltage fuse-links for motor circuit application |
EN 62271-105:2012 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 105: ALTERNATING CURRENT SWITCH-FUSE COMBINATIONS FOR RATED VOLTAGES ABOVE 1 KV UP TO AND INCLUDING 52 KV (IEC 62271-105:2012) |
EN 62475 : 2010 | HIGH-CURRENT TEST TECHNIQUES - DEFINITIONS AND REQUIREMENTS FOR TEST CURRENTS AND MEASURING SYSTEMS |
NBR 7282 : 2011 | HIGH-VOLTAGE FUSES - EXPULSION TYPE FUSES - REQUIREMENTS AND TEST METHODS |
CEI EN 62271-105 : 2014 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 105: ALTERNATING CURRENT SWITCH-FUSE COMBINATIONS FOR RATED VOLTAGES ABOVE 1 KV UP TO AND INCLUDING 52 KV |
IEC 60644:2009 | Specification for high-voltage fuse-links for motor circuit applications |
BS EN 45510-2-7:2002 | Guide for the procurement of power station equipment. Electrical equipment Switchgear and controlgear |
08/30167152 DC : DRAFT FEB 2008 | BS EN 60644 - SPECIFICATION FOR HIGH-VOLTAGE FUSE-LINK FOR MOTOR CIRCUIT APPLICATIONS |
BS EN 61642:1998 | Industrial a.c. networks affected by harmonics. Application of filters and shunt capacitors |
CEI UNI EN 45510-2-7 : 2006 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR |
IEEE C37.48-2005 | IEEE Guide for the Application, Operation, and Maintenance of High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories |
IEC TR 60787:2007 | Application guide for the selection of high-voltage current- limiting fuse-links for transformer circuits |
IEEE C37.302-2015 | IEEE Guide for Fault Current Limiter (FCL) Testing of FCLs Rated above 1000 V AC |
I.S. EN 60076-13:2006 | POWER TRANSFORMERS - PART 13: SELF-PROTECTED LIQUID-FILLED TRANSFORMERS |
I.S. EN 60077-5:2003 | RAILWAY APPLICATIONS - ELECTROTECHNICAL EQUIPMENT FOR ROLLING STOCK - PART 5: ELECTROTECHNICAL COMPONENTS - RULES FOR HV FUSES |
IEC 60092-503:2007 | Electrical installations in ships - Part 503: Special features - AC supply systems with voltages in the range of above 1 kV up to and including 15 kV |
BS 7426(1991) : AMD 8059 | SPECIFICATION FOR HIGH VOLTAGE ALTERNATING CURRENT SWITCH FUSE COMBINATIONS |
11/30215282 DC : 0 | BS EN 60549 - HIGH-VOLTAGE FUSES FOR THE EXTERNAL PROTECTION OF SHUNT CAPACITORS |
BS EN 60077-5:2003 | Railway applications. Electrotechnical equipment for rolling stock Electrotechnical components. Rules for HV fuses |
09/30213777 DC : 0 | BS EN 62271-107 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 107: ALTERNATING CURRENT FUSED CIRCUIT-SWITCHERS FOR RATED VOLTAGES ABOVE 1 KV UP TO AND INCLUDING 52 KV |
I.S. EN 60549:2013 | HIGH-VOLTAGE FUSES FOR THE EXTERNAL PROTECTION OF SHUNT CAPACITORS (IEC 60549:2013 (EQV)) |
BIS IS/IEC 62271-105 : 2002 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 105: ALTERNATING CURRENT SWITCH-FUSE COMBINATIONS |
99/200375 DC : DRAFT MAR 1999 | IEC 60420 - HIGH-VOLTAGE ALTERNATING CURRENT SWITCH-FUSE COMBINATIONS |
10/30218329 DC : 0 | BS EN 62271-105 ED 2 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 105: ALTERNATING SWITCH-FUSE COMBINATIONS |
05/30133504 DC : DRAFT MAY 2005 | IEC 60787 ED 2 - APPLICATION GUIDE FOR THE SELECTION OF FUSE-LINKS OF HIGH-VOLTAGE FUSES FOR TRANSFORMER CIRCUIT APPLICATIONS |
IEEE C37.47-2011 | IEEE Standard Specifications for High-Voltage (>1000 V) Distribution Class Current-Limiting Type Fuses and Fuse Disconnecting Switches |
IEEE C37.46-2010 | IEEE Standard Specifications for High-Voltage (>1000 V) Expulsion and Current-Limiting Power Class Fuses and Fuse Disconnecting Switches |
IEC 60420:1990 | High-voltage alternating current switch-fuse combinations |
CEI EN 62271-107 : 2013 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 107: ALTERNATING CURRENT FUSED CIRCUIT-SWITCHERS FOR RATED VOLTAGES ABOVE 1 KV UP TO AND INCLUDING 52 KV |
CEI EN 60549 : 2014 | HIGH-VOLTAGE FUSES FOR THE EXTERNAL PROTECTION OF SHUNT CAPACITORS |
IEC TR 62655:2013 | Tutorial and application guide for high-voltage fuses |
IEC 61892-3:2012 | Mobile and fixed offshore units - Electrical installations - Part 3: Equipment |
IEC 60076-13:2006 | Power transformers - Part 13: Self-protected liquid-filled transformers |
IEC 62271-105:2012 | High-voltage switchgear and controlgear - Part 105: Alternating current switch-fuse combinations for rated voltages above 1 kV up to and including 52 kV |
UNE-EN 62271-107:2012 | High-voltage switchgear and controlgear - Part 107: Alternating current fused circuit-switchers for rated voltages above 1 kV up to and including 52 kV |
I.S. EN 62271-107:2012 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 107: ALTERNATING CURRENT FUSED CIRCUIT-SWITCHERS FOR RATED VOLTAGES ABOVE 1 KV UP TO AND INCLUDING 52 KV (IEC 62271-107:2012 (EQV)) |
PD IEC/TR 62655:2013 | Tutorial and application guide for high-voltage fuses |
BS IEC 60092-503:2007 | Electrical installations in ships Special features. AC supply systems with voltages in the range of above 1 kV up to and including 15 kV |
PD IEC/TR 60787:2007 | Application guide for the selection of high-voltage current-limiting fuse-links for transformer circuits |
NF EN 60549 : 2013 | HIGH-VOLTAGE FUSES FOR THE EXTERNAL PROTECTION OF SHUNT CAPACITORS |
UNI CEI EN 45510-2-7 : 2011 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR |
I.S. EN 60644:2009 | SPECIFICATION FOR HIGH-VOLTAGE FUSE-LINKS FOR MOTOR CIRCUIT APPLICATION |
IEC 62271-106:2011 | High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters |
IEC 62475:2010 | High-current test techniques - Definitions and requirements for test currents and measuring systems |
IEC 62271-107:2012 | High-voltage switchgear and controlgear - Part 107: Alternating current fused circuit-switchers for rated voltages above 1 kV up to and including 52 kV |
UNE-EN 62271-106:2012 | High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters |
EN 45510-2-7:2002 | Guide for procurement of power station equipment - Part 2-7: Electrical equipment - Switchgear and controlgear |
IEEE C37.42-2009 | IEEE Standard Specifications for High-Voltage (> 1000 V) Expulsion-Type Distribution-Class Fuses, Fuse and Disconnecting Cutouts, Fuse Disconnecting Switches, and Fuse Links, and Accessories Used with These Devices |
BS EN 62271-105:2012 | High-voltage switchgear and controlgear Alternating current switch-fuse combinations for rated voltages above 1 kV up to and including 52 kV |
IEEE C37.43-2008 | IEEE Standard Specifications for High-Voltage Expulsion, Current-Limiting, and Combination-Type Distribution and Power Class External Fuses, with Rated Voltages from 1 kV through 38 kV, Used for the Protection of Shunt Capacitors |
CEI EN 60076-13 : 2007 | POWER TRANSFORMERS - PART 13: SELF PROTECTED LIQUID FILLED TRANSFORMERS |
CEI EN 60077-5 : 2004 | RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 5: ELECTROTECHNICAL COMPONENTS - RULES FOR HV FUSES |
BS EN 60470:2001 | High-voltage alternating current contactors and contactor-based motor starters |
IEEE C37.46-2010 | FOR HIGH VOLTAGE EXPULSION AND CURRENT-LIMITING TYPE POWER CLASS FUSES AND FUSE DISCONNECTING SWITCHES |
08/30183795 DC : DRAFT JUNE 2008 | BS EN 62271-106 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 106: ALTERNATING CURRENT CONTACTORS, CONTACTOR-BASED CONTROLLERS AND CONTACTOR-BASED MOTOR-STARTERS |
BS EN 60549:2013 | High-voltage fuses for the external protection of shunt capacitors |
BS 5622-2:1979 | Guide for insulation co-ordination Application guide |
DIN VDE 0660-105 : 1984 | HIGH-VOLTAGE MOTOR STARTERS; PART 1: DIRECT-ON-LINE (FULL VOLTAGE) A.C. STARTERS |
03/100521 DC : DRAFT MAR 2003 | IEC 62271-107 ED.1.0 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 107: ALTERNATING CURRENT FUSED CIRCUIT-SWITCHERS FOR RATED VOLTAGES ABOVE 1 KV UP TO AND INCLUDING 52 KV |
IEC 60077-5:2003 | Railway applications - Electric equipment for rolling stock - Part 5: Electrotechnical components - Rules for HV fuses |
BS IEC 61892-3:2012 | Mobile and fixed offshore units. Electrical installations Equipment |
BS 5907(1980) : 1980 AMD 8019 | SPECIFICATION FOR HIGH VOLTAGE FUSE LINKS FOR MOTOR CIRCUIT APPLICATIONS |
UNE-EN 62475:2012 | High-current test techniques - Definitions and requirements for test currents and measuring systems |
I.S. EN 62475:2010 | HIGH-CURRENT TEST TECHNIQUES - DEFINITIONS AND REQUIREMENTS FOR TEST CURRENTS AND MEASURING SYSTEMS |
EN 62271-106:2011 | High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters |
IEEE C37.41-2008 REDLINE | IEEE Standard Design Tests for High-Voltage (>1000 V) Fuses, Fuse and Disconnecting Cutouts, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Fuse Links and Accessories Used with These Devices |
UNE-EN 62271-105:2013 | High-voltage switchgear and controlgear - Part 105: Alternating current switch-fuse combinations for rated voltages above 1 kV up to and including 52 kV |
IEC 60549:2013 | High-voltage fuses for the external protection of shunt capacitors |
EN 60470:2000/corrigendum Jun. 2000 | HIGH-VOLTAGE ALTERNATING CURRENT CONTACTORS AND CONTACTOR-BASED MOTOR STARTERS |
EN 60076-13 : 2006 | POWER TRANSFORMERS - PART 13: SELF-PROTECTED LIQUID-FILLED TRANSFORMERS |
EN 62271-107:2012 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 107: ALTERNATING CURRENT FUSED CIRCUIT-SWITCHERS FOR RATED VOLTAGES ABOVE 1 KV UP TO AND INCLUDING 52 KV (IEC 62271-107:2012) |
EN 60549:2013 | High-voltage fuses for the external protection of shunt capacitors |
CEI 18-58 : 2013 | MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 3: EQUIPMENT |
IEC 62271-100:2008+AMD1:2012+AMD2:2017 CSV | High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers |
IEC 60076-7:2005 | Power transformers - Part 7: Loading guide for oil-immersed power transformers |
IEC TR 60787:2007 | Application guide for the selection of high-voltage current- limiting fuse-links for transformer circuits |
IEC 62271-105:2012 | High-voltage switchgear and controlgear - Part 105: Alternating current switch-fuse combinations for rated voltages above 1 kV up to and including 52 kV |
AS IEC 62475:2019 | High-current test techniques - Definitions and requirements for test currents and measuring systems |
ISO 148-2:2016 | Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines |
IEC 60050-441:1984 | International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear, controlgear and fuses |
IEC 60644:2009 | Specification for high-voltage fuse-links for motor circuit applications |
IEC TR 62655:2013 | Tutorial and application guide for high-voltage fuses |
IEC 60549:2013 | High-voltage fuses for the external protection of shunt capacitors |
IEC 60085:2007 | Electrical insulation - Thermal evaluation and designation |
IEC 62271-1:2017 | High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear |
IEC 60060-1:2010 | High-voltage test techniques - Part 1: General definitions and test requirements |
IEC 60071-1:2006+AMD1:2010 CSV | Insulation co-ordination - Part 1: Definitions, principles and rules |
IEC TR 60890:2014 | A method of temperature-rise verification of low-voltage switchgear and controlgear assemblies by calculation |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.