IEC 60426:2007
Current
Current
The latest, up-to-date edition.
Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, English - French
Published date
01-29-2007
Publisher
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General description of the test method
5 Test specimens
5.1 General
5.2 Cut surfaces of rigid materials (blocks, plates,
sheets or semi-finished materials)
5.3 Cast, moulding, injection and pressed materials
5.4 Cut surfaces of flexible films, foils and thin
sheets
5.5 Adhesive tapes
5.6 Flexible sleeving and tubing
5.7 Lacquers and insulating varnishes
5.8 Cleanliness of contact surfaces
5.9 Number of test specimens
6 Test strips
6.1 General
6.2 Preparation of the test strips
6.3 Cleanliness of test strips
7 Test device
8 Test conditions
9 Test procedure
10 Evaluation
10.1 General evaluation
10.2 Visual inspection of the test strips
10.3 Tensile strength of test strips
11 Evaluation of corrosion on copper strips
12 Test report
Annex A (normative) Tables for the evaluation of corrosion
on brass and aluminium strips
Annex B (informative) Notes on visual evaluation
Annex C (informative) Copper wire tensile strength method
IEC 60426:2007 determines the ability of insulating materials to produce electrolytic corrosion on metals being in contact with them under the influence of electric stress, high humidity and elevated temperature. The effect of electrolytic corrosion is assessed in one test by using consecutively two methods:
- visual semi-quantitative method consisting in comparing visually the corrosion appearing on the anode and cathode metal strips, with those given in the reference figures. This method consists of the direct visual assessment of the degree of corrosion of two copper strips, acting as anode and cathode respectively, placed in contact with the tested insulating material under a d.c. potential difference at specified environmental conditions. The degree of corrosion is assessed by visually comparing the corrosion marks on the anode and cathode metal strips with those shown in the reference figures;
- quantitative method, which involves the tensile strength measurement, carried out on the same anode and cathode metal strips after visual inspection.
An additional quantitative test method for determining electrolytic corrosion, which involves tensile strength measurement of copper wire, is described in the informative Annex C.
| Committee |
TC 112
|
| DevelopmentNote |
Stability Date: 2020. (11/2012)
|
| DocumentType |
Standard
|
| Pages |
26
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NEN EN IEC 60426 : 2007 | Identical |
| I.S. EN 60426:2007 | Identical |
| PN EN 60426 : 2007 | Identical |
| DIN EN 60426 : 2007 COR 1 2010 | Identical |
| VDE 0303-6 : 2007 COR 1 2010 | Identical |
| BIS IS 8516 : 2011(R2016) | Identical |
| BS EN 60426:2007 | Identical |
| CEI EN 60426 : 2007 | Identical |
| EN 60426:2007 | Identical |
| AS 3532-1988 | Identical |
| UNE-EN 60426:2007 | Identical |
| UNE 21362:1978 | Identical |
| NFC 26 260 : 1974 | Identical |
| NF EN 60454 3-2 : 2006 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 2: REQUIREMENTS FOR POLYESTER FILM TAPES WITH RUBBER THERMOSETTING, RUBBER THERMOPLASTIC OR ACRYLIC CROSSLINKED ADHESIVES |
| CEI EN 60454-3-11 : 2008 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 11: POLYESTER FILM COMBINATIONS WITH GLASS FILAMENT, CREPED CELLULOSIC PAPER, POLYESTER NON-WOVEN, EPOXY AND PRESSURESENSITIVE ADHESIVES |
| VDE 0340-3-13 : 1997 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES SPECIFICATIONS FOR INDIVIDUAL MATERIALS; REQUIREMENTS FOR COMBINED CELLULOSE-VISCOSE WOVEN FABRIC TAPES, ONE SIDE RECOVERED WITH THERMOPLASTIC MATERIAL, THE OTHER SIDE WITH RUBBER THERMOSETTING ADHESIVE |
| NF EN 60454 3-16 : 2003 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 16: POLYESTER FILM/GLASS FILAMENT COMBINATIONS WITH PRESSURE-SENSITIVE ADHESIVE |
| I.S. EN 60674-2:2017 | SPECIFICATION FOR PLASTIC FILMS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| NF EN 60454 3-5 : 1998 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 5: CELLULOSIC PAPER, NON CREPED, WITH RUBBER THERMOSETTING ADHESIVE |
| BS ISO 20753 : 2008 | PLASTICS - TEST SPECIMENS |
| IEC 60454-3-1:1998+AMD1:2001 CSV | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: PVC film tapes with pressure-sensitive adhesive |
| IEC 60454-3-5:1998 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 5: Cellulosic paper, non-creped, with rubber thermosetting adhesive |
| VDE 0340-3-5 : 1999 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - SPECIFICATIONS FOR INDIVIDUAL MATERIALS; CELLULOSIC PAPER, NON-CREPED, WITH RUBBER THERMOSETTING ADHESIVE |
| BS EN 60454-3-1:1998 | Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials PVC film tapes with pressure-sensitive adhesive |
| BS 7290-2(1990) : 1990 AMD 10106 | PLASTICS FILMS FOR ELECTRICAL PURPOSES - METHODS OF TEST |
| 05/30127512 DC : DRAFT JAN 2005 | IEC 60454-3-4 ED 3 - PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS |
| CEI EN 60454-3-8 : 2006 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: WOVEN FABRIC TAPES WITH PRESSURE-SENSITIVE ADHESIVE BASED ON GLASS, CELLULOSE ACETATE ALONE OR COMBINED WITH VISCOSE FIBRE |
| I.S. EN 60454-3-12:2006 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 12: REQUIREMENTS FOR POLYETHYLENE AND POLYPROPYLENE FILM TAPES WITH PRESSURE SENSITIVE ADHESIVE |
| BS EN 60454-3-14:2002 | Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials Polytetrafluoroethylene film tapes with pressure-sensitive adhesive. - Sheet 14: Polytetrafluoroethylene film tapes with pressure-sensitive adhesive. |
| 11/30239006 DC : 0 | BS EN 13237 - POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| CEI EN 60454-2 : 2008 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| CEI EN 60454-3-6 : 1999 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3-6: SPECIFICATIONS FOR INDIVIDUAL MATERIALS SHEET 6: POLYCARBONATE FILM TAPES WITH ACRYLIC THERMOPLASTIC ADHESIVE |
| CEI EN 60454-3-2 : 2006 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3-2: SPECIFICATIONS FOR INDIVIDUAL MATERIALS SHEET 2: REQUIREMENTS FOR POLYESTER FILM TAPES WITH RUBBER THERMOSETTING, RUBBER THERMOPLASTIC OR ACRYLIC CROSSLINKED ADHESIVES |
| CEI EN 60454-3-7 : 1999 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 7: POLYIMIDE FILM TAPES WITH PRESSURE-SENSITIVE ADHESIVE |
| BS EN 60454-3-2:2006 | Pressure-sensitive adhesive tapes for electrical purposes Specifications for individual materials - Requirements for polyester film tapes with rubber thermosetting, rubber thermoplastic or acrylic crosslinked adhesives |
| DIN EN ISO 20753 E : 2014 | PLASTICS - TEST SPECIMENS (ISO 20753:2008) |
| IEC 60454-3-13:1995 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 13: Requirements for combined cellulose-viscose woven fabric tapes, one side covered with a thermoplastic material, the other side with rubber thermosetting adhesive |
| IEC 60454-3-3:1998 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Polyester film tapes with rubber thermoplastic adhesive |
| NF EN 60454 3-6 : 1998 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 6: POLYCARBONATE FILM TAPES WITH ACRYLIC THERMOPLASTIC ADHESIVE |
| VDE 0340-3-8 : 2006 COR 1 2007 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: WOVEN FABRIC TAPES WITH PRESSURE-SENSITIVE ADHESIVE BASED ON GLASS, CELLULOSE ACETATE ALONE OR COMBINED WITH VISCOSE FIBRE |
| VDE 0340-3-7 : 1999 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - SPECIFICATIONS FOR INDIVIDUAL MATERIALS; POLYIMIDE FILM TAPES WITH PRESSURE-SENSITIVE ADHESIVE |
| IEC 60249-3-3:1991 | Base materials for printed circuits - Part 3: Special materials used in connection with printed circuits - Specification No. 3: Permanent polymer coating materials (solder resist) for use in the fabrication of printed boards |
| DIN EN ISO 20753:2014-07 | PLASTICS - TEST SPECIMENS (ISO 20753:2008) |
| IEC 60454-3-18:2003 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 18: Polypropylene film tapes with pressure-sensitive adhesive |
| BS EN 1965-2:2011 | Structural adhesives. Corrosion Determination and classification of corrosion to a brass substrate |
| IEC 60454-3-19:2003 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 19: Tapes made from various backing materials with pressure-sensitive adhesive on both sides |
| IEC 60454-3-4:2007 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Cellulose paper, creped and non-creped, with rubber thermosetting adhesive |
| BS EN ISO 3167:2014 | Plastics. Multipurpose test specimens |
| BS EN 60893-2:2004 | Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Methods of test |
| EN 60454-3-4:2007 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 4: CELLULOSE PAPER, CREPED AND NON-CREPED, WITH RUBBER THERMOSETTING ADHESIVE |
| EN 60454-3-17:2001 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 17: Polyester/epoxy combinations with pressure-sensitive adhesive |
| EN 60454-3-12:2006 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 12: Requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesive |
| EN 60454-3-6:1998 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 6: Polycarbonate film tapes with acrylic thermoplastic adhesive |
| EN 60684-2:2011 | Flexible insulating sleeving - Part 2: Methods of test |
| EN 60454-3-16:2003 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 16: Polyester film/glass filament combinations with pressure-sensitive adhesive |
| EN 60454-2:2007 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| EN 60454-3-9:1998 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 9: Cellulose acetate woven fabric tapes with rubber thermosetting adhesive |
| EN 60454-3-19:2003 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 19: Tapes made from various backing materials with pressure-sensitive adhesive on both sides |
| BS EN 60454-2:2007 | Pressure-sensitive adhesive tapes for electrical purposes Methods of test |
| DIN EN 60454-3-10 : 1997 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS; SHEET 10: REQUIREMENTS FOR CELLULOSE-ACETATE-BUTYRATE FILM TAPES WITH RUBBER THERMOSETTING ADHESIVE |
| 05/30132990 DC : DRAFT APR 2005 | ISO 20753 - PLASTICS - TEST SPECIMENS |
| VDE 0340-3-9 : 1999 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - SPECIFICATIONS FOR INDIVIDUAL MATERIALS; CELLULOSE ACETATE WOVEN FABRIC TAPES WITH RUBBER THERMOSETTING ADHESIVE |
| BS EN 60454-3-18:2003 | Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials |
| NF EN 60454 3-1 : 1998 AMD 1 2010 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 1: PVC FILM TAPES WITH PRESSURE-SENSITIVE ADHESIVE |
| BS EN 60454-3-6:1998 | Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials Polycarbonate film tapes with acrylic thermoplastic adhesive |
| IEC 60454-3-6:1998 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 6: Polycarbonate film tapes with acrylic thermoplastic adhesive |
| BS EN 60454-3-7:1998 | Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials Polyimide film tapes with pressure-sensitive adhesive |
| CEI EN 60454-3-14 : 2002 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 14: POLYTETRAFLUOROETHYLENE FILM TAPES WITH PRESSURE SENSITIVE ADHESIVE |
| CEI EN 60454-3-4 : 2008 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3-4: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 4: CELLULOSE PAPER, CREPED AND NON-CREPED, WITH RUBBER THERMOSETTING ADHESIVE |
| CEI EN 60454-3-12 : 2006 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 12: REQUIREMENTS FOR POLYETHYLENE AND POLYPROPYLENE FILM TAPES WITH PRESSURE SENSITIVE ADHESIVE |
| BS EN 60454-3-4:2007 | Pressure-sensitive adhesive tapes for electrical purposes Specifications for individual materials - Cellulose paper, creped and non-creped, with rubber thermosetting adhesive |
| NF EN 60454 3-9 : 1998 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 9: CELLULOSE ACETATE WOVEN FABRIC TAPES WITH RUBBER THERMOSETTING ADHESIVE |
| NF EN 60684-2 : 2012 | FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST |
| IEC 60454-3-10:1995 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 10: Requirements for cellulose-acetate-butyrate film tapes with rubber thermosetting adhesive |
| NF EN 60454 3-19 : 2003 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 19: TAPES MADE FROM VARIOUS BACKING MATERIALS WITH PRESSURE-SENSITIVE ADHESIVE ON BOTH SIDES |
| I.S. EN ISO 20753:2014 | PLASTICS - TEST SPECIMENS (ISO 20753:2008) |
| I.S. EN 60454-2:2007 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| BS EN 60454-3-12:2006 | Pressure-sensitive adhesive tapes for electrical purposes Specifications for individual materials - Requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesive |
| IEC 60674-2:2016 | Specification for plastic films for electrical purposes - Part 2: Methods of test |
| I.S. EN 60454-3-10:1999 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 10: REQUIREMENTS FOR CELLULOSE-ACETATE-BUTYRATE FILM TAPES WITH RUBBER THERMOSETTING ADHESIVE |
| EN 60454-3-13:1995 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 13: Requirements for combined cellulose-viscose woven fabric tapes, one side covered with a thermoplastic material, the other side with rubber thermosetting adhesive |
| IEC 60454-3-9:1998 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 9: Cellulose acetate woven fabric tapes with rubber thermosetting adhesive |
| I.S. EN ISO 3167:2014 | PLASTICS - MULTIPURPOSE TEST SPECIMENS (ISO 3167:2014) |
| I.S. EN 1965-2:2011 | STRUCTURAL ADHESIVES - CORROSION - PART 2: DETERMINATION AND CLASSIFICATION OF CORROSION TO A BRASS SUBSTRATE |
| VDE 0340-3-12 : 2007 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 12: REQUIREMENTS FOR POLYETHYLENE AND POLYPROPYLENE FILM TAPES WITH PRESSURE SENSITIVE ADHESIVE |
| DIN EN 60454-3-5 : 1999 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS; SHEET 5: CELLULOSIC PAPER, NON-CREPED, WITH RUBBER THERMOSETTING ADHESIVE |
| DIN EN 60454-3-7 : 1999 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS; SHEET 7: POLYIMIDE FILM TAPES WITH PRESSURE-SENSITIVE ADHESIVE |
| DIN EN 60454-3-6 : 1999 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS; SHEET 6: POLYCARBONATE FILM TAPES WITH ACRYLIC THERMOSETTING ADHESIVE |
| VDE 0340-3-10 : 1997 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - SPECIFICATIONS FOR INDIVIDUAL MATERIALS; REQUIREMENTS FOR CELLULOSE-ACETATE-BUTYRATE FILM TAPES WITH RUBBER THERMOSETTING ADHESIVE |
| VDE 0340-3-3 : 1999 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - SPECIFICATIONS FOR INDIVIDUAL MATERIALS; POLYESTER FILM TAPES WITH RUBBER THERMOPLASTIC ADHESIVE |
| VDE 0340-3-6 : 1999 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - SPECIFICATIONS FOR INDIVIDUAL MATERIALS; POLYCARBONATE FILM TAPES WITH ACRYLIC THERMOSETTING ADHESIVE |
| 04/301990 DC : DRAFT JAN 2004 | IEC 60454-3-8 ED.3 - PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: GLASS FABRIC WITH PRESSURE-SENSITIVE ADHESIVE |
| I.S. EN 60454-3-18:2003 | SPECIFICATIONS FOR PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - SPECIFICATIONS FOR INDIVIDUAL MATERIALS - POLYPROPYLENE FILM TAPES WITH PRESSURE-SENSITIVE ADHESIVE |
| VDE 0340-3-2 : 2006 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 2: REQUIREMENTS FOR POLYESTER FILM TAPES WITH RUBBER THERMOSETTING, RUBBER THERMOPLASTIC OR ACRYLIC CROSSLINKED ADHESIVES |
| BS EN 60454-3-16:2003 | Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials Polyester film/glass filament combinations with pressure-sensitive adhesive |
| NF EN 60454 3-7 : 1998 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 7: POLYIMIDE FILM TAPES WITH PRESSURE-SENSITIVE ADHESIVE |
| 04/302041 DC : DRAFT JAN 2004 | IEC 60454-3-2 ED.2 - PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATION FOR INDIVIDUAL MATERIALS - SHEET 2: POLYESTER FILM TAPES WITH RUBBER THERMOSETTING OR ACRYLIC CROSSLINKED ADHESIVES |
| 08/30176905 DC : DRAFT JAN 2008 | BS EN 60684-2 - FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST |
| CEI EN 60454-3-19 : 2004 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 19: TAPES MADE FROM VARIOUS BACKING MATERIALS WITH PRESSURE-SENSITIVE ADHESIVE ON BOTH SIDES |
| NF EN 60454-3-14 : 2003 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 14: POLYTETRAFLUOROETHYLENE FILM TAPES WITH PRESSURE-SENSITIVE ADHESIVE |
| BS EN 60455-2:2015 | Resin based reactive compounds used for electrical insulation Methods of test |
| NF EN 60454 3-3 : 1998 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 3: POLYESTER FILM TAPES RUBBER THERMOPLASTIC ADHESIVE |
| 05/30127517 DC : DRAFT JAN 2005 | IEC 60454-3-11 ED 2 - PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS |
| 04/301991 DC : DRAFT JAN 2004 | IEC 60454-3-12 ED.2 - PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 12: POLYETHYLENE FILM TAPES WITH PRESSURE-SENSITIVE ADHESIVE |
| BS EN 60684-2:2011 | Flexible insulating sleeving Methods of test |
| BS EN 60454-3-3:1998 | Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials Polyester film tapes with rubber thermoplastic adhesive |
| NF EN 60454 3-12 : 2006 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 12: REQUIREMENTS FOR POLYETHYLENE AND POLYPROPYLENE FILM TAPES WITH PRESSURE SENSITIVE ADHESIVES |
| I.S. EN 60454-3-3:1999 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - SPECIFICATIONS FOR INDIVIDUAL MATERIALS - POLYESTER FILM TAPES WITH RUBBER THERMOPLASTIC ADHESIVE |
| I.S. EN 60455-2:2015 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST |
| I.S. EN 60454-3-8:1999 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - SPECIFICATIONS FOR INDIVIDUAL MATERIALS - GLASS FABRIC WITH PRESSURE-SENSITIVE ADHESIVE |
| NF EN 60454-3-15 : 2003 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 15: POLYESTER FILM/POLYESTER NON-WOVEN COMBINATIONS WITH RUBBER THERMOSETTING ADHESIVE |
| I.S. EN 60454-3-4:2007 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 4: CELLULOSE PAPER, CREPED AND NON-CREPED, WITH RUBBER THERMOSETTING ADHESIVE |
| BS EN ISO 20753:2014 | Plastics. Test specimens |
| ASTM D 5936 : 1996 | Specification for Multipurpose Test Specimens (Withdrawn 1998) |
| IEC 60454-3-16:2003 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 16: Polyester film/glass filament combinations with pressure-sensitive adhesive |
| EN 60674-2:2017/AC:2018-01 | SPECIFICATION FOR PLASTIC FILMS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST (IEC 60674-2:2016/COR1:2017) |
| UNI EN ISO 3167 : 2014 | PLASTICS - MULTIPURPOSE TEST SPECIMENS |
| EN 60249-1 : 1993 COR 1994 | BASE MATERIALS FOR PRINTED CIRCUITS - PART 1: TEST METHODS |
| BS EN 61249-8-8:1997 | Materials for interconnection structures. Sectional specification set for non-conductive films and coatings Temporary polymer coatings |
| ISO 20753:2008 | Plastics Test specimens |
| I.S. EN 60684-2:2011 | FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST (IEC 60684-2:2011) |
| I.S. EN 60454-3-16:2003 | SPECIFICATIONS FOR PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - SPECIFICATIONS FOR INDIVIDUAL MATERIALS - POLYESTER FILM/GLASS FILAMENT COMBINATIONS WITH PRESSURE-SENSITIVE ADHESIVE |
| BS EN 60454-3-11:2007 | Pressure-sensitive adhesive tapes for electrical purposes Specifications for individual materials - Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and pressure-sensitive adhesives |
| BS EN 60454-3-19:2003 | Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials Tapes made from various backing materials with pressure-sensitive adhesive on both sides - Sheet 19: Tapes made from various backing materials with pressure-sensitive adhesive on both sides |
| BS EN 60454-3-17:2002 | Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials Polyester/epoxy combinations with pressure-sensitive adhesive |
| 10/30231835 DC : DRAFT SEP 2010 | BS EN 1965-2 - STRUCTURAL ADHESIVES - CORROSION - PART 2: DETERMINATION AND CLASSIFICATION OF CORROSION TO A BRASS SUBSTRATE |
| I.S. EN 60454-3-2:2006 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 2: REQUIREMENTS FOR POLYESTER FILM TAPES WITH RUBBER THERMOSETTING, RUBBER THERMOPLASTIC OR ACRYLIC CROSSLINKED ADHESIVES |
| I.S. EN 60454-3-9:1999 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 9: CELLULOSE ACETATE WOVEN FABRIC TAPES WITH RUBBER THERMOSETTING ADHESIVE |
| I.S. EN 60454-3-13:1999 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 13: REQUIREMENTS FOR COMBINED CELLULOSE-VISCOSE WOVEN FABRIC TAPES, ONE SIDE RECOVERED WITH THERMOPLASTIC MATERIAL, THE OTHER SIDE WITH RUBBER THERMOSETTING ADHESIVE |
| I.S. EN 60454-3-5:1999 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 5: CELLULOSIC PAPER, NON-CREPED, WITH RUBBER THERMOSETTING ADHESIVE |
| I.S. EN 60454-3-7:1999 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - SPECIFICATIONS FOR INDIVIDUAL MATERIALS - POLYIMIDE FILM TAPES WITH PRESSURE-SENSITIVE ADHESIVE |
| UNI EN ISO 20753 : 2014 | PLASTICS - TEST SPECIMENS |
| BS EN 60674-2:2017+A1:2019 | Specification for plastic films for electrical purposes Methods of test |
| NF EN 60674-2 : 98 AMD 1 2002 | SPECIFICATION FOR PLASTIC FILMS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| CEI EN 60454-3-10 : 1996 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 10: REQUIREMENTS FOR CELLULOSE-ACETATE-BUTYRATE FILM TAPES WITH RUBBER THERMOSETTING ADHESIVE |
| EN ISO 20753:2014 | PLASTICS - TEST SPECIMENS (ISO 20753:2008) |
| I.S. EN 60454-3-6:1999 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 6: POLYCARBONATE FILM TAPES WITH ACRYLIC THERMOPLASTIC ADHESIVE |
| IEC 60454-3-7:1998 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Polyimide film tapes with pressure-sensitive adhesive |
| DIN EN 1965-2:2011-07 | Structural adhesives - Corrosion - Part 2: Determination and classification of corrosion to a brass substrate |
| DIN EN ISO 3167:2014-11 | PLASTICS - MULTIPURPOSE TEST SPECIMENS (ISO 3167:2014) |
| IEC 60454-3-2:2006 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for polyester film tapes with rubber thermosetting, rubber thermoplastic or acrylic crosslinked adhesives |
| IEC 60454-3-14:2001 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 14: Polytetrafluoroethylene film tapes with pressure-sensitive adhesive |
| IEC 60455-2:2015 | Resin based reactive compounds used for electrical insulation - Part 2: Methods of test |
| IEC 60454-2:2007 | Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test |
| IEC 60684-2:2011 | Flexible insulating sleeving - Part 2: Methods of test |
| IEC 60454-3-8:2006 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 8 - Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre |
| IEC 60454-3-11:2007 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 11: Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and pressure-sensitive adhesive |
| ISO 3167:2014 | Plastics Multipurpose test specimens |
| IEC 60454-3-15:2001 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 15: Polyester film/polyester non-woven combinations with rubber thermosetting adhesive |
| UNE-EN ISO 3167:2014 | Plastics - Multipurpose test specimens (ISO 3167:2014) |
| EN ISO 3167:2014 | Plastics - Multipurpose test specimens (ISO 3167:2014) |
| EN 1965-2:2011 | Structural adhesives - Corrosion - Part 2: Determination and classification of corrosion to a brass substrate |
| DIN EN 60454-3-13 : 1997 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS; SHEET 13: REQUIREMENTS FOR COMBINED CELLULOSE-VISCOSE WOVEN FABRIC TAPES, ONE SIDE RECOVERED WITH THERMOPLASTIC MATERIAL, THE OTHER SIDE WITH RUBBER THERMOSETTING ADHESIVE |
| I.S. EN 60454-3-19:2003 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 19: TAPES MADE FROM VARIOUS BACKING MATERIALS WITH PRESSURE-SENSITIVE ADHESIVE ON BOTH SIDES |
| BS EN 60454-3-5:1998 | Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials Cellulosic paper, non-creped, with rubber thermosetting adhesive |
| CEI EN 60684-2 : 2012 | FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST |
| BS EN 60454-3-15:2002 | Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials Polyester film/polyester non-woven combinations with rubber thermosetting adhesive |
| NF EN 60454 3-8 : 2006 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: WOVEN FABRIC TAPES WITH PRESSURE-SENSITIVE ADHESIVE BASED ON GLASS, CELLULOSE ACETATE ALONE OR COMBINED WITH VISCOSE FIBRE |
| NF EN 60454 3-18 : 2003 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 18: POLYPROPYLENE FILM TAPES WITH PRESSURE-SENSITIVE ADHESIVE |
| I.S. EN 60249-1:1994 | BASE MATERIALS FOR PRINTED CIRCUITS - PART 1: TEST METHODS |
| BS EN 60454-3-8:2006 | Pressure-sensitive adhesive tapes for electrical purposes Specifications for individual materials - Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre |
| I.S. EN 60454-3-11:2007 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 11: POLYESTER FILM COMBINATIONS WITH GLASS FILAMENT, CREPED CELLULOSIC PAPER, POLYESTER NON-WOVEN, EPOXY AND PRESSURE-SENSITIVE ADHESIVES |
| NF EN 60454-3-17 : 2003 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 17: POLYESTER/EPOXY COMBINATIONS WITH PRESSURE-SENSITIVE ADHESIVE |
| UNE-EN ISO 20753:2015 | Plastics - Test specimens (ISO 20753:2008) |
| I.S. EN 60454-3-1:1999 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - SPECIFICATIONS FOR INDIVIDUAL MATERIALS - PVC FILM TAPES WITH PRESSURE-SENSITIVE ADHESIVE |
| EN 60454-3-8:2006/corrigendum Dec. 2006 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: WOVEN FABRIC TAPES WITH PRESSURE-SENSITIVE ADHESIVE BASED ON GLASS, CELLULOSE ACETATE ALONE OR COMBINED WITH VISCOSE FIBRE |
| IEC 60454-3-12:2006 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 12: Requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesive |
| IEC 60454-3-17:2001 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 17: Polyester/epoxy combinations with pressure-sensitive adhesive |
| EN 60454-3-11:2007 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 11: Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and pressure-sensitive adhesives |
| EN 60454-3-3:1998 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Polyester film tapes with rubber thermoplastic adhesive |
| EN 60454-3-1:1998/A1:2001 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - SPECIFICATIONS FOR INDIVIDUAL MATERIALS - PVC FILM TAPES WITH PRESSURE-SENSITIVE ADHESIVE |
| EN 60454-3-5:1998 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 5: Cellulosic paper, non-creped, with rubber thermosetting adhesive |
| EN 60454-3-18:2003 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 18: Polypropylene film tapes with pressure-sensitive adhesive |
| EN 60454-3-10 : 1995 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 10: REQUIREMENTS FOR CELLULOSE-ACETATE-BUTYRATE FILM TAPES WITH RUBBER THERMOSETTING ADHESIVE |
| EN 60454-3-15:2001 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 15: Polyester film/polyester non-woven combinations with rubber thermosetting adhesive |
| EN 60454-3-14:2001 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 14: Polytetrafluoroethylene film tapes with pressure-sensitive adhesive |
| EN 60455-2:2015 | Resin based reactive compounds used for electrical insulation - Part 2: Methods of test |
| EN 60454-3-7:1998 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Polyimide film tapes with pressure-sensitive adhesive |
| EN 60454-3-2:2006 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for polyester film tapes with rubber thermosetting, rubber thermoplastic or acrylic crosslinked adhesives |
| IEC 60454-2:2007 | Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test |
| IEC 60068-3-4:2001 | Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests |
US$220.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - English - French
PDF - English - French
PDF 3 Users - English - French
PDF 5 Users - English - French
PDF 9 Users - English - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.