IEC 60447 : 3.0

BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - ACTUATING PRINCIPLES

International Electrotechnical Committee

Current

Add To Cart

Product Format

Table of Contents - (Show below) - (Hide below)

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
  4.1 Basic principles
  4.2 Operating sequence
5 Actions and effects
  5.1 Actions to initiate opposite effects
  5.2 Stopping an effect
  5.3 Emergency STOP actuator
  5.4 Actions to initiate only one effect
6 Actuator identification requirements
  6.1 Visual signal
  6.2 Acoustic signal
  6.3 Tactile signal
7 Requirements for special kinds and particular use of actuators
  7.1 Single actuator for combined start/stop control
  7.2 Push-pull buttons
  7.3 Raise and lower with a lever
  7.4 Foot-operated actuators
  7.5 Numeric/alphanumeric keys
  7.6 Function keys
  7.7 Sensitive areas (actuators) on a visual display unit (VDU)
Annex A (normative) Classification of, and correlation between,
                      actions and their resulting final effects
Annex B (informative) Typical examples of monofunction actuators
Bibliography

Abstract - (Show below) - (Hide below)

Establishes general actuating principles for manually operated actuators forming part of the man-machine interface associated with electrical equipment, in order to: - increase the safety (e.g. of persons, property, environment) through the safe operation of the equipment; - facilitate the proper and timely operation of the actuators.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Standard
Status	Current
Publisher	International Electrotechnical Committee
Pages
ISBN
Committee	TC 16
Supersedes	IEC 60054-2 : LATEST

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
CEI 16-5 : 2ED 1995	Identical
BS EN 60447 : 2004	Identical
SN EN 60447 : 2004	Identical
PN EN 60447 : 2005	Identical
CEI EN 60447 : 2005	Identical
NEN EN IEC 60447 : 2004	Identical
VDE 0196 : 2004	Identical
I.S. EN 60447:2004	Identical
NF EN 60447 : 2004	Identical
GOST IEC 60447 : 2015	Identical
DIN EN 60447 : 2004	Identical
DS EN 60447 : 2005	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

DIN VDE 0660-100 : 1992	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
15/30265353 DC : 0	BS EN 62271-1 ED 2 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR
VDI/VDE 3699-6 : 2015	PROCESS CONTROL USING DISPLAY SCREENS - INTERACTION PROCEDURES AND DEVICES
14/30265073 DC : 0	BS EN ISO 12643-1 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
BS ISO 25861 : 2007	SHIPS AND MARINE TECHNOLOGY - NAVIGATION - DAYLIGHT SIGNALLING LAMPS
BIS IS/IEC 60947-3 : 1999	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE COMBINATION UNITS
BS EN 15093 : 2008	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS
BS IEC 60092-504 : 2016	ELECTRICAL INSTALLATIONS IN SHIPS - PART 504: AUTOMATION, CONTROL AND INSTRUMENTATION
BS PD ISO/TR 22100-3 : 2016	SAFETY OF MACHINERY - RELATIONSHIP WITH ISO 12100 - PART 3: IMPLEMENTATION OF ERGONOMIC PRINCIPLES IN SAFETY STANDARDS
09/30175681 DC : 0	BS EN 14656:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
BS EN 62744 : 2015	REPRESENTATION OF STATES OF OBJECTS BY GRAPHICAL SYMBOLS
BS EN 61095 : 1993	ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES
12/30218691 DC : 0	BS EN 61175 - INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - DESIGNATION OF SIGNALS
ISO 12643-1 : 2009(R2015)	GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
05/30142160 DC : DRAFT NOV 2005	ISO 25861 - SHIPS AND MARINE TECHNOLOGY - NAVIGATION - DAYLIGHT SIGNALLING LAMPS
BS EN 61175-1 : 2015	INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - DESIGNATION OF SIGNALS - PART 1: BASIC RULES
09/30201246 DC : 0	BS EN 710:1997/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT ASSOCIATED EQUIPMENT
14/30302359 DC : 0	BS EN ISO 11553-2 ED.2 - SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 2: SAFETY REQUIREMENTS FOR HAND-HELD LASER PROCESSING DEVICES
09/30175678 DC : 0	BS EN 14681:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
14/30304423 DC : 0	BS EN 62271-102 ED 2 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 102: ALTERNATING CURRENT DISCONNECTORS AND EARTHING SWITCHES
09/30180832 DC : DRAFT AUG 2009	BS EN 13675 AMD1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND FINISHING LINE EQUIPMENT
I.S. EN 61010-1:2010&A1:2019	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
08/30190505 DC : 0	BS ISO 12643-1 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
BS EN 60947-1 : 2007	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
BS EN 50134-2 : 2017	ALARM SYSTEMS - SOCIAL ALARM SYSTEMS - PART 2: TRIGGER DEVICES
BS EN 45510-2-7 : 2002	GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
DIN EN ISO 8230-1 E : 2009	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
BS ISO 12643-1 : 2009	GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
NBR IEC 61892-6 : 2014	MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 6: INSTALLATION
10/30235503 DC : 0	BS EN 61496-1 AMD 2 - SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS
CEI EN 60073 : 2003	BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - CODING PRINCIPLES FOR INDICATORS AND ACTUATORS
03/301332 DC : DRAFT JAN 2003	ISO 12649 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR BINDING AND FINISHING SYSTEMS AND EQUIPMENT
BS PD IEC TR 61997 : 2001	GUIDELINES FOR THE USER INTERFACE IN MULTIMEDIA EQUIPMENT FOR GENERAL PURPOSE USE
I.S. EN 15093:2008	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS
94/712993 DC : DRAFT NOV 1994	PREN 45511 - GUIDE FOR PROCUREMENT - ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
CEI EN 61310-3 : 2008	SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 3: REQUIREMENTS FOR THE LOCATION AND OPERATION OF ACTUATORS
I.S. EN 61175-1:2015	INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - DESIGNATION OF SIGNALS - PART 1: BASIC RULES
DIN EN 15094 : 2009	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS
BS EN 61209 : 1999
IEC TS 62666 : 2.0	GUIDELINES FOR THE INCLUSION OF DOCUMENTATION ASPECTS IN PRODUCT STANDARDS
UNI EN 15094 : 2009	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS
UNI EN ISO 8230-1 : 2009	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
BS EN ISO 8230-1 : 2008	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
04/30117619 DC : DRAFT AUG 2004	IEC 61310-3 - SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 3: REQUIREMENTS FOR THE LOCATION AND OPERATION OF ACTUATORS
UNE EN 60204-1 : 2007	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
ISO 12648 : 2006	GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR PRINTING PRESS SYSTEMS
NF EN 60073 : 2003	BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - CODING PRINCIPLES FOR INDICATORS AND ACTUATORS
BS ISO 1503 : 2008	SPATIAL ORIENTATION AND DIRECTION OF MOVEMENT - ERGONOMIC REQUIREMENTS
CEI 18-54 : 2003	ELECTRICAL INSTALLATIONS IN SHIPS - PART 504: SPECIAL FEATURES - CONTROL AND INSTRUMENTATION
04/30096910 DC : DRAFT OCT 2004	ISO 11553-2 - SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 2: SAFETY REQUIREMENTS FOR HAND OPERATED LASER PROCESSING DEVICES
01/120061 DC : DRAFT JAN 2001	ISO 12648 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR PRINTING PRESS SYSTEMS
DIN EN 15093 : 2009	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS
UNI EN 15093 : 2009	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS
04/30115780 DC : DRAFT JUN 2004	ISO 9355-3 - SAFETY OF MACHINERY - ERGONOMIC REQUIREMENTS FOR THE DESIGN OF SIGNALS AND CONTROL ACTUATORS - PART 3: CONTROL ACTUATORS
CSA E61496.1 : 2004	SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS
I.S. EN 61439-1:2011	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES (IEC 61439-1:2011)
14/30304361 DC : 0	BS EN ISO 11111-1 - TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 1: COMMON REQUIREMENTS
BS EN 60073 : 2002	BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - CODING PRINCIPLES FOR INDICATORS AND ACTUATORS
BS ISO 8468 : 2007	SHIPS AND MARINE TECHNOLOGY - SHIP'S BRIDGE LAYOUT AND ASSOCIATED EQUIPMENT - REQUIREMENTS AND GUIDELINES
BS EN 15094 : 2008	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS
BS EN 61310-3 : 2008	SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 3: REQUIREMENTS FOR THE LOCATION AND OPERATION OF ACTUATORS
BS ISO 12648 : 2006	GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR PRINTING PRESS SYSTEMS
NF EN 60601-1 : 2007-01	MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
04/30110212 DC : DRAFT MAR 2004	ISO 12648 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR PRINTING PRESS SYSTEMS
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 1 : 2015	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
BS IEC 61892-3 : 2012	MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 3: EQUIPMENT
BS ISO 12649 : 2004	GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR BINDING AND FINISHING SYSTEMS AND EQUIPMENT
15/30302640 DC : 0	BS IEC 60092-504 ED 4.0 - ELECTRICAL INSTALLATIONS IN SHIPS - PART 504: AUTOMATION, CONTROL AND INSTRUMENTATION
07/30168572 DC : 0	BS IEC 61010-1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
NBR IEC 60439-1 : 2003	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: TYPE-TESTED AND PARTIALLY TYPE-TESTED ASSEMBLIES
BS 5724-1(1979) : 1979	MEDICAL ELECTRICAL EQUIPMENT - SPECIFICATION FOR GENERAL SAFETY REQUIREMENTS
CEI UNI EN 45510-2-7 : 2006	GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
EN 50134-2 : 2017	ALARM SYSTEMS - SOCIAL ALARM SYSTEMS - PART 2: TRIGGER DEVICES
03/311404 DC : 0	IEC 61010-1 ED.3 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
02/205170 DC : DRAFT APR 2002	ISO/CD 17884 - SHIP AND MARINE TECHNOLOGY - NAVIGATION - SEARCHLIGHTS FOR HIGH SPEED CRAFT
BS 4099-1(1986) : 1986	COLOURS OF INDICATOR LIGHTS, PUSH-BUTTONS, ANNUNCIATORS AND DIGITAL READOUTS - SPECIFICATION FOR COLOURS OF INDICATOR LIGHTS AND PUSH-BUTTONS
04/30086349 DC : DRAFT APR 2004	EN ISO 13849-1 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
CSA E61496.1 : 2004 : R2013	SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS
CSA C22.2 No. 61010.1 : 2012	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
04/30087862 DC : DRAFT FEB 2004	IEC 61175 ED.2 - INDUSTRIAL SYSTEMS, INSTALLATION AND EQUIPMENT AND INDUSTRIAL PRODUCTS - DESIGNATION OF SIGNALS
CSA Z431 : 2012 : R2016	BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - CODING PRINCIPLES FOR INDICATORS AND ACTUATORS
CSA E61496.1 : 2004	SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS
CSA C22.2 No. 61010.1 : 2012 : FR	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
IEC 60073 : 6.0	BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - CODING PRINCIPLES FOR INDICATORS AND ACTUATORS
CSA Z431 : 2012	BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - CODING PRINCIPLES FOR INDICATORS AND ACTUATORS
NF EN 61310-3 : 2008	SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 3: REQUIREMENTS FOR THE LOCATION AND OPERATION OF ACTUATORS
IEEE 1621 : 2004	USER INTERFACE ELEMENTS IN POWER CONTROL OF ELECTRONIC DEVICES EMPLOYED IN OFFICE/CONSUMER ENVIRONMENTS
DIN EN 15094 E : 2009	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS
UNI CEI EN 45510-2-7 : 2011	GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
DIN EN 15093 E : 2009	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS
DIN EN ISO 8230-1 : 2009	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
CSA C22.2 No. 61010.1 : 2012	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
IEC 60092-504 REDLINE : 4ED 2016	ELECTRICAL INSTALLATIONS IN SHIPS - PART 504: AUTOMATION, CONTROL AND INSTRUMENTATION
BS EN 61010-1:2010+A1:2019	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
ISO 25861 : 2007(R2017)	SHIPS AND MARINE TECHNOLOGY - NAVIGATION - DAYLIGHT SIGNALLING LAMPS
IEC 62271-1 : 2.0	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR
IEC 60204-1 REDLINE : 6ED 2016	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 60601.1 : 2014	MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
IEC 60092-504 : 4.0	ELECTRICAL INSTALLATIONS IN SHIPS - PART 504: AUTOMATION, CONTROL AND INSTRUMENTATION
IEC 60364-5-51 : 5.0	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES
BS IEC 61892-6 : 2013	MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 6: INSTALLATION
I.S. EN 62271-1:2017	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR
SR HD 60364-5-51:2009	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES
CEI EN 61095 : 2010	ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES
I.S. EN 60947-1:2007	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 2 : 2016	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
I.S. HD 60364-5-51:2009	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES (IEC 60364-5-51:2005 (MOD))
EN 60204-1 : 2006 COR 2010	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
BS EN 62271-1 : 2017	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR (IEC 62271-1:2017)
I.S. EN 62744:2015	REPRESENTATION OF STATES OF OBJECTS BY GRAPHICAL SYMBOLS
BS EN 61496-1 : 2013	SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS
NBR IEC 60947-1 : 2013	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
EN 62271-1 : 2017	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR (IEC 62271-1:2017)
I.S. EN 50134-2:2017	ALARM SYSTEMS - SOCIAL ALARM SYSTEMS - PART 2: TRIGGER DEVICES
I.S. EN 61095:2009	ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES
I.S. EN 15094:2008	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS
NF EN 61095 : 2009	ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES
I.S. EN 60073:2002	BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - CODING PRINCIPLES FOR INDICATION DEVICES AND ACTUATORS
ISO 12649 : 2004	GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR BINDING AND FINISHING SYSTEMS AND EQUIPMENT
BS IEC 61892-2 : 2012	MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 2: SYSTEM DESIGN
ISO 9355-3 : 2006(R2015)	ERGONOMIC REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 3: CONTROL ACTUATORS
I.S. HD 384.5.51:1998	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - CHAPTER 51: COMMON RULES
ISO/TR 22100-3 : 2016	SAFETY OF MACHINERY - RELATIONSHIP WITH ISO 12100 - PART 3: IMPLEMENTATION OF ERGONOMIC PRINCIPLES IN SAFETY STANDARDS
I.S. EN 61310-3:2008	SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 3: REQUIREMENTS FOR THE LOCATION AND OPERATION OF ACTUATORS
NF EN 60947-1 : 2007 AMD 2 2015	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
I.S. EN 60204-33:2011	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 33: REQUIREMENTS FOR SEMICONDUCTOR FABRICATION EQUIPMENT
I.S. EN 61204-7:2006	LOW VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 7: SAFETY REQUIREMENTS
BS PD IEC TR 60601-4-3 : 2015	MEDICAL ELECTRICAL EQUIPMENT - PART 4-3: GUIDANCE AND INTERPRETATION - CONSIDERATIONS OF UNADDRESSED SAFETY ASPECTS IN THE THIRD EDITION OF IEC 60601-1 AND PROPOSALS FOR NEW REQUIREMENTS
CSA Z431 : 2012	BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - CODING PRINCIPLES FOR INDICATORS AND ACTUATORS
CSA C22.2 No. 61010.1 : 2012 (R2017)	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 61010.1 : 2012 : R2017	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 1 : 2015	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 2 : 2016	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
I.S. EN 61010-1:2010	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
13/30250344 DC : 0	BS EN 62744 - REPRESENTATION OF STATES OF OBJECTS BY GRAPHIC SYMBOLS
I.S. EN 60601- 1:2006&A1:2013&AC:2014&A12:2014	MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
I.S. EN ISO 8230-1:2008	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
CSA C22.2 No. 1010.1 : 0	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - GENERAL REQUIREMENTS
DIN EN 61175-1 : 2016	INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - DESIGNATION OF SIGNALS - PART 1: BASIC RULES (IEC 61175-1:2015)
IEC 61771 : 1.0	NUCLEAR POWER PLANTS - MAIN CONTROL-ROOM - VERIFICATION AND VALIDATION OF DESIGN
I.S. EN 61496-1:2013	SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS
ISO 1503 : 2008(R2018)	SPATIAL ORIENTATION AND DIRECTION OF MOVEMENT - ERGONOMIC REQUIREMENTS
IEC 61892-6 : 2013	MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 6: INSTALLATION
I.S. EN 60439-1:2000	LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES
IEC 61892-2:2012	MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 2: SYSTEM DESIGN
IEC 60204-1 : 6.0	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
IEC 61892-3 : 3.0	MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 3: EQUIPMENT
I.S. EN 60204-1:2006	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
I.S. EN 60204-32:2008	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES
IEC TR 61997 : 1.0	GUIDELINES FOR THE USER INTERFACE IN MULTIMEDIA EQUIPMENT FOR GENERAL PURPOSE USE
ISO 8468 : 2007(R2017)	SHIPS AND MARINE TECHNOLOGY - SHIP'S BRIDGE LAYOUT AND ASSOCIATED EQUIPMENT - REQUIREMENTS AND GUIDELINES
IEC TR 60601-4-3 : 1ED 2015	MEDICAL ELECTRICAL EQUIPMENT - PART 4-3: GUIDANCE AND INTERPRETATION - CONSIDERATIONS OF UNADDRESSED SAFETY ASPECTS IN THE THIRD EDITION OF IEC 60601-1 AND PROPOSALS FOR NEW REQUIREMENTS
ISO TR 18569 : 2004	SAFETY OF MACHINERY - GUIDELINES FOR THE UNDERSTANDING AND USE OF SAFETY OF MACHINERY STANDARDS
IEC 60204-33 : 1.0	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 33: REQUIREMENTS FOR SEMICONDUCTOR FABRICATION EQUIPMENT