IEC 60811-100:2012
Current
The latest, up-to-date edition.
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English - French, Spanish, Castilian
03-12-2012
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Test values
5 Applicability
6 Type tests and other tests
7 Test report
Annex A (informative) - Structure and content of
IEC 60811
IEC 60811-100:2012 describes general requirements and considerations that are applicable to all the test methods given in the particular parts, unless otherwise specified. This first edition of IEC 60811-100 collects together general matters that apply to the restructured IEC 60811 series. A detailed explanation is provided in the Introduction. Annex A provides full information on the relation between the current and the previous series. This revised series of IEC 60811 is based upon the principle of "one test - one part". One significant technical change that now applies throughout the series is a defined minimum scheme for the presentation of test reports.
Committee |
TC 20
|
DevelopmentNote |
Stability Date: 2020. (11/2017)
|
DocumentType |
Standard
|
Pages |
21
|
PublisherName |
International Electrotechnical Committee
|
Status |
Current
|
Standards | Relationship |
JIS C 3660-100:2019 | Identical |
GOST IEC 60811-100 : 2015 | Identical |
NF EN 60811-100 : 2012 | Identical |
NBN EN 60811-100 : 2012 | Identical |
NEN EN IEC 60811-100 : 2012 | Identical |
PN EN 60811-100 : 2012 | Identical |
SANS 60811-100 : 1ED 2012 | Identical |
DIN EN 60811-100 : 2012 | Identical |
VDE 0473-811-100 : 2012 | Identical |
UNE-EN 60811-100:2012 | Identical |
BS EN 60811-100:2012 | Identical |
CEI EN 60811-100 : 2014 | Identical |
EN 60811-100 : 2012 | Identical |
SANS 60811-100:2012(R2023) | Identical |
I.S. EN 60811-404:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 404: MISCELLANEOUS TESTS - MINERAL OIL IMMERSION TESTS FOR SHEATHS (IEC 60811-404:2012 (EQV)) |
NF EN 60811-606 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 606: PHYSICAL TESTS - METHODS FOR DETERMINING THE DENSITY |
UNE-EN 60811-602:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 602: Physical tests - Separation of oil in filling compounds |
UNE-EN 60811-503:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 503: Mechanical tests - Shrinkage test for sheaths |
09/30193095 DC : 0 | BS EN 60811-607 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 607: PHYSICAL TEST - TEST FOR THE ASSESSMENT OF CARBON BLACK DISPERSION IN POLYETHYLENE AND POLYPROPYLENE |
09/30193079 DC : 0 | BS EN 60811-603 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 603: PHYSICAL TESTS - MEASUREMENT OF TOTAL ACID NUMBER OF FILLING COMPOUNDS |
UNE-EN 60811-606:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 606: Physical tests - Methods for determining the density |
CEI EN 60811-401 : 2014 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 401: MISCELLANEOUS TESTS - THERMAL AGEING METHODS - AGEING IN AN AIR OVEN |
BS EN 60811-402:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Miscellaneous tests. Water absorption tests |
BS EN 60811-403:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Miscellaneous tests. Ozone resistance test on cross-linked compounds |
09/30192958 DC : DRAFT JAN 2009 | BS EN 60811-301 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 301: ELECTRICAL TESTS - MEASUREMENT OF THE PERMITTIVITY AT 23 DEGREE C OF FILLING COMPOUNDS |
NF EN 60811-408 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 408: MISCELLANEOUS TESTS - LONG-TERM STABILITY TEST OF POLYETHYLENE AND POLYPROPYLENE COMPOUNDS |
NF EN 60811-502 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 502: MECHANICAL TESTS - SHRINKAGE TEST FOR INSULATIONS |
09/30193039 DC : 0 | BS EN 60811-507 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 507: MECHANICAL TESTS - HOT SET TEST FOR CROSS-LINKED MATERIALS |
09/30192943 DC : DRAFT JAN 2009 | BS EN 60811-201 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 201: GENERAL TESTS - MEASUREMENT OF INSULATION THICKNESS |
09/30193075 DC : DRAFT JAN 2009 | BS EN 60811-602 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 602: PHYSICAL TESTS - SEPARATION OF OIL IN FILLING COMPOUNDS |
09/30192978 DC : DRAFT JAN 2009 | BS EN 60811-404 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 404: ENVIRONMENTAL TESTS - MINERAL OIL IMMERSION TESTS FOR SHEATHS MADE WITH ELASTOMERIC COMPOUNDS |
CEI EN 60811-302 : 2014 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 302: ELECTRICAL TESTS - MEASUREMENT OF THE D.C. RESISTIVITY AT 23 DEGREES C AND 100 DEGREES C OF FILLING COMPOUNDS |
09/30193010 DC : 0 | BS EN 60811-412 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 412: ENVIRONMENTAL TESTS - THERMAL AGEING METHODS - AGEING IN AN AIR BOMB |
09/30193059 DC : 0 | BS EN 60811-511 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 511: MECHANICAL TESTS - MEASUREMENT OF THE MELT FLOW INDEX OF POLYETHYLENE AND POLYPROPYLENE COMPOUNDS |
UNE-EN 60811-409:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths |
I.S. EN 60811-503:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 503: MECHANICAL TESTS - SHRINKAGE TEST FOR SHEATHS (IEC 60811-503:2012 (EQV)) |
09/30193055 DC : 0 | BS EN 60811-510 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 510: MECHANICAL TESTS - METHODS SPECIFIC TO POLYETHYLENE AND POLYPROPYLENE COMPOUNDS - WRAPPING TEST AFTER THERMAL AGEING IN AIR |
UNE-EN 60811-407:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds |
NF EN 60811-404 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 404: MISCELLANEOUS TESTS - MINERAL OIL IMMERSION TESTS FOR SHEATHS MADE WITH CROSSLINKED COMPOUNDS |
NF EN 60811-510 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 510: MECHANICAL TESTS - METHODS SPECIFIC TO POLYETHYLENE AND POLYPROPYLENE COMPOUNDS - WRAPPING TEST AFTER THERMAL AGEING IN AIR |
09/30192954 DC : DRAFT JAN 2009 | BS EN 60811-203 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 203: GENERAL TESTS - MEASUREMENT OF OVERALL DIMENSIONS |
09/30192998 DC : 0 | BS EN 60811-409 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 409: ENVIRONMENTAL TESTS - LOSS OF MASS TEST FOR THERMOPLASTIC INSULATIONS AND SHEATHS |
09/30192986 DC : DRAFT JAN 2009 | BS EN 60811-406 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 406: ENVIRONMENTAL TESTS - RESISTANCE TO ENVIRONMENTAL STRESS CRACKING OF POLYETHYLENE AND POLYPROPYLENE COMPOUNDS |
I.S. EN 60811-403:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 403: MISCELLANEOUS TESTS - OZONE RESISTANCE TEST ON CROSS-LINKED COMPOUNDS (IEC 60811-403:2012 (EQV)) |
I.S. EN 60811-409:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 409: MISCELLANEOUS TESTS - LOSS OF MASS TEST FOR THERMOPLASTIC INSULATIONS AND SHEATHS (IEC 60811-409:2012 (EQV)) |
IEEE 1242-1999 | IEEE Guide for Specifying and Selecting Power, Control, and Special-Purpose Cable for Petroleum and Chemical Plants |
I.S. EN 60811-302:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 302: ELECTRICAL TESTS - MEASUREMENT OF THE D.C. RESISTIVITY AT 23 DEGREES C AND 100 DEGREES C OF FILLING COMPOUNDS (IEC 60811-302:2012 (EQV)) |
CEI EN 60811-202 : 2014 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 202: GENERAL TESTS - MEASUREMENT OF THICKNESS OF NON-METALLIC SHEATH |
I.S. EN 60811-510:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 510: MECHANICAL TESTS - METHODS SPECIFIC TO POLYETHYLENE AND POLYPROPYLENE COMPOUNDS - WRAPPING TEST AFTER THERMAL AGEING IN AIR (IEC 60811-510:2012 (EQV)) |
BS EN 60811-410:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Miscellaneous tests. Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors |
I.S. EN 60811-604:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 604: PHYSICAL TESTS - MEASUREMENT OF ABSENCE OF CORROSIVE COMPONENTS IN FILLING COMPOUNDS (IEC 60811-604:2012 (EQV)) |
I.S. EN 50289-4-17:2015 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 4-17: TEST METHODS FOR UV RESISTANCE EVALUATION OF THE SHEATH OF ELECTRICAL AND OPTICAL FIBRE CABLE |
CEI EN 60811-405 : 2014 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 405: MISCELLANEOUS TESTS - THERMAL STABILITY TEST FOR PVC INSULATIONS AND PVC SHEATHS |
EN 60811-201:2012/A1:2017 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 201: GENERAL TESTS - MEASUREMENT OF INSULATION THICKNESS (IEC 60811-201:2012/A1:2017) |
UNE-EN 60811-505:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 505: Mechanical tests - Elongation at low temperature for insulations and sheaths |
I.S. EN 60811-407:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 407: MISCELLANEOUS TESTS - MEASUREMENT OF MASS INCREASE OF POLYETHYLENE AND POLYPROPYLENE COMPOUNDS (IEC 60811-407:2012 (EQV)) |
I.S. EN 60811-402:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 402: MISCELLANEOUS TESTS - WATER ABSORPTION TESTS (IEC 60811-402:2012 (EQV)) |
NF EN 60811-507 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 507: MECHANICAL TESTS - HOT SET TEST FOR CROSS-LINKED MATERIALS |
NF EN 60811-202 : 2012 AMD 1 2017 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 202: GENERAL TESTS - MEASUREMENT OF THICKNESS OF NON-METALLIC SHEATHS |
EN 60811-505:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 505: Mechanical tests - Elongation at low temperature for insulations and sheaths |
EN 60811-402:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 402: Miscellaneous tests - Water absorption tests |
EN 60811-605:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 605: Physical tests - Measurement of carbon black and/or mineral filler in polyethylene compounds |
EN 60811-404:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 404: Miscellaneous tests - Mineral oil immersion tests for sheaths |
EN 60811-203:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions |
EN 60811-506:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 506: Mechanical tests - Impact test at low temperature for insulations and sheaths |
EN 60811-513:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 513: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after conditioning |
EN 60811-606:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 606: Physical tests - Methods for determining the density |
EN 60811-512:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 512: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature |
EN 60811-501:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds |
EN 50289-4-17:2015 | Communication cables - Specifications for test methods - Part 4-17: Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable |
BS EN 60811-501 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 501: MECHANICAL TESTS - TESTS FOR DETERMINING THE MECHANICAL PROPERTIES OF INSULATING AND SHEATHING COMPOUNDS |
09/30192962 DC : DRAFT JAN 2009 | BS EN 60811-302 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 302: ELECTRICAL TESTS - MEASUREMENT OF THE D.C. RESISTIVITY AT 23 DEGREE C AND 100 DEGREE C OF FILLING COMPOUNDS |
I.S. EN 60811-502:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 502: MECHANICAL TESTS - SHRINKAGE TEST FOR INSULATIONS (IEC 60811-502:2012 (EQV)) |
BS EN 60811-602:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Physical tests. Separation of oil in filling compounds |
EN 60811-202:2012/A1:2017 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 202: GENERAL TESTS - MEASUREMENT OF THICKNESS OF NON-METALLIC SHEATH (IEC 60811-202:2012/A1:2017) |
BS EN 60811-409:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Miscellaneous tests. Loss of mass test for thermoplastic insulations and sheaths |
I.S. EN 60811-511:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 511: MECHANICAL TESTS - MEASUREMENT OF THE MELT FLOW INDEX OF POLYETHYLENE COMPOUNDS |
BS EN 60811-201:2012 | Electric and optical fibre cables. Test methods for non-metallic materials General tests. Measurement of insulation thickness |
UNE-EN 60811-203:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions |
I.S. EN 60811-505:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 505: MECHANICAL TESTS - ELONGATION AT LOW TEMPERATURE FOR INSULATIONS AND SHEATHS (IEC 60811-505:2012 (EQV)) |
BS EN 60811-203:2012 | Electric and optical fibre cables. Test methods for non-metallic materials General tests. Measurement of overall dimensions |
I.S. EN 60811-512:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 512: MECHANICAL TESTS - METHODS SPECIFIC TO POLYETHYLENE AND POLYPROPYLENE COMPOUNDS - TENSILE STRENGTH AND ELONGATION AT BREAK AFTER CONDITIONING AT ELEVATED TEMPERATURE (IEC 60811-512:2012 (EQV)) |
I.S. EN 60811-408:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 408: MISCELLANEOUS TESTS - LONG-TERM STABILITY TEST OF POLYETHYLENE AND POLYPROPYLENE COMPOUNDS (IEC 60811-408:2012 (EQV)) |
BS EN 60811-404:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Miscellaneous tests. Mineral oil immersion tests for sheaths |
BS EN 60811-512:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Mechanical tests. Methods specific to polyethylene and polypropylene compounds. Tensile strength and elongation at break after conditioning at elevated temperature |
I.S. EN 60811-405:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 405: MISCELLANEOUS TESTS - THERMAL STABILITY TEST FOR PVC INSULATIONS AND PVC SHEATHS (IEC 60811-405:2012 (EQV)) |
15/30331409 DC : 0 | BS EN 62153-4-17 - METALLIC COMMUNICATION CABLE TEST METHODS - PART 4-17: ELECTROMAGNETIC COMPATIBILITY (EMC) - REDUCTION FACTOR TEST METHOD |
BS EN 60811-607:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Physical tests. Test for the assessment of carbon black dispersion in polyethylene and polypropylene |
NF EN 60811-301 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 301: ELECTRICAL TESTS - MEASUREMENT OF THE PERMITTIVITY AT 23 DEGREES C OF FILLING COMPOUNDS |
BS EN 60811-601:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Physical tests. Measurement of the drop point of filling compounds |
I.S. EN 60811-406:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 406: MISCELLANEOUS TESTS - RESISTANCE TO STRESS CRACKING OF POLYETHYLENE AND POLYPROPYLENE COMPOUNDS (IEC 60811-406:2012 (EQV)) |
NF EN 60811-412 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 412: MISCELLANEOUS TESTS - THERMAL AGEING METHODS - AGEING IN AN AIR BOMB |
09/30193047 DC : 0 | BS EN 60811-508 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 508: MECHANICAL TESTS - PRESSURE TEST AT HIGH TEMPERATURE FOR INSULATION AND SHEATHS |
BS EN 60811-506:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Mechanical tests. Impact test at low temperature for insulations and sheaths |
BS EN 60811-503:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Mechanical tests. Shrinkage test for sheaths |
UNE-EN 60811-601:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 601: Physical tests - Measurement of the drop point of filling compounds |
BS EN 60811-405:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Miscellaneous tests. Thermal stability test for PVC insulations and PVC sheaths |
NF EN 60811-513 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 513: MECHANICAL TESTS - METHODS SPECIFIC TO POLYETHYLENE AND POLYPROPYLENE COMPOUNDS - WRAPPING TEST AFTER CONDITIONING |
NF EN 60811-601 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 601: PHYSICAL TESTS - MEASUREMENT OF THE DROP-POINT OF FILLING COMPOUNDS |
UNE-EN 60811-404:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 404: Miscellaneous tests - Mineral oil immersion tests for sheaths |
BS EN 60811-508:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Mechanical tests. Pressure test at high temperature for insulation and sheaths |
EN 60811-509:2012/A1:2017 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 509: MECHANICAL TESTS - TEST FOR RESISTANCE OF INSULATIONS AND SHEATHS TO CRACKING (HEAT SHOCK TEST) (IEC 60811-509:2012/A1:2017) |
EN 60811-508:2012/A1:2017 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 508: MECHANICAL TESTS - PRESSURE TEST AT HIGH TEMPERATURE FOR INSULATION AND SHEATHS (IEC 60811-508:2012/A1:2017) |
BS EN 60811-509:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Mechanical tests. Test for resistance of insulations and sheaths to cracking (heat shock test) |
I.S. EN 60811-203:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 203: GENERAL TESTS - MEASUREMENT OF OVERALL DIMENSIONS (IEC 60811-203:2012 (EQV)) |
NF EN 60811-605 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 605: PHYSICAL TESTS - MEASUREMENT OF CARBON BLACK AND/OR MINERAL FILLER IN POLYETHYLENE COMPOUNDS |
CEI EN 60811-301 : 2014 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 301: ELECTRICAL TESTS - MEASUREMENT OF THE PERMITTIVITY AT 23 DEGREES C OF FILLING COMPOUNDS |
NF EN 60811-508 : 2012 AMD 1 2017 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 508: MECHANICAL TESTS - PRESSURE TEST AT HIGH TEMPERATURE FOR INSULATION AND SHEATHS |
UNE-EN 60811-501:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds |
CEI EN 60811-408 : 2014 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 408: MISCELLANEOUS TESTS - LONG-TERM STABILITY TEST OF POLYETHYLENE AND POLYPROPYLENE COMPOUNDS |
NF EN 60811-503 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 503: MECHANICAL TESTS - SHRINKAGE TEST FOR SHEATHS |
I.S. EN 60811-602:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 602: PHYSICAL TESTS - SEPARATION OF OIL IN FILLING COMPOUNDS (IEC 60811-602:2012 (EQV)) |
IEC 60811-510:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 510: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after thermal ageing in air |
IEC 60811-603:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 603: Physical tests - Measurement of total acid number of filling compounds |
IEC 60811-506:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 506: Mechanical tests - Impact test at low temperature for insulations and sheaths |
09/30193031 DC : 0 | BS EN 60811-505 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 505: MECHANICAL TESTS - ELONGATION AT LOW TEMPERATURE FOR INSULATIONS AND SHEATHS |
I.S. EN 60811-507:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 507: MECHANICAL TESTS - HOT SET TEST FOR CROSS-LINKED MATERIALS (IEC 60811-507:2012 (EQV)) |
NF EN 60811-407 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 407: MISCELLANEOUS TESTS - MEASUREMENT OF MASS INCREASE OF POLYETHYLENE AND POLYPROPYLENE COMPOUNDS |
09/30193027 DC : 0 | BS EN 60811-504 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 504: MECHANICAL TESTS - BENDING TESTS AT LOW TEMPERATURE FOR INSULATION AND SHEATHS |
BS EN 60811-510:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Mechanical tests. Methods specific to polyethylene and polypropylene compounds. Wrapping test after thermal ageing in air |
BS EN 60811-408:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Miscellaneous tests. Long-term stability test of polyethylene and polypropylene compounds |
I.S. EN 60811-411:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 411: MISCELLANEOUS TESTS - LOW-TEMPERATURE BRITTLENESS OF FILLING COMPOUNDS (IEC 60811-411:2012 (EQV)) |
BS EN 50289-4-17:2015 | Communication cables. Specifications for test methods Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable |
NF EN 60811-511 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 511: MECHANICAL TESTS - MEASUREMENT OF THE MELT FLOW INDEX OF POLYETHYLENE COMPOUNDS |
09/30192990 DC : DRAFT JAN 2009 | BS EN 60811-407 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 407: ENVIRONMENTAL TESTS - MEASUREMENT OF MASS INCREASE OF POLYETHYLENE AND POLYPROPYLENE COMPOUNDS |
NF EN 60811-405 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 405: MISCELLANEOUS TESTS - THERMAL STABILITY TEST FOR PVC INSULATIONS AND PVC SHEATHS |
BS EN 60811-605:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Physical tests. Measurement of carbon black and/or mineral filler in polyethylene compounds |
CEI EN 60811-201 : 2014 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 201: GENERAL TESTS - MEASUREMENT OF INSULATION THICKNESS |
09/30193071 DC : 0 | BS EN 60811-601 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 601: PHYSICAL TESTS - MEASUREMENT OF THE DROP-POINT OF FILLING COMPOUNDS |
NF EN 60811-501 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 501: MECHANICAL TESTS - TESTS FOR DETERMINING THE MECHANICAL PROPERTIES OF INSULATING AND SHEATHING COMPOUNDS |
CEI EN 60811-203 : 2014 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 203: GENERAL TESTS - MEASUREMENT OF OVERALL DIMENSIONS |
CEI EN 60811-412 : 2014 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 412: MISCELLANEOUS TESTS - THERMAL AGEING METHODS - AGEING IN AN AIR BOMB |
09/30193006 DC : 0 | BS EN 60811-411 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 411: ENVIRONMENTAL TESTS - LOW TEMPERATURE BRITTLENESS OF FILLING COMPOUNDS |
BS EN 60811-511:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Mechanical tests. Measurement of the melt flow index of polyethylene compounds |
BS EN 60811-412:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Miscellaneous tests. Thermal ageing methods. Ageing in an air bomb |
UNE-EN 60811-406:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 406: Miscellaneous tests - Resistance to stress cracking of polyethylene and polypropylene compounds |
BS EN 60811-302:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Electrical tests. Measurement of the d.c. resistivity at 23°C and 100°C of filling compounds |
BS EN 60811-603:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Physical tests. Measurement of total acid number of filling compounds |
BS EN 60811-604:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Physical tests. Measurement of absence of corrosive components in filling compounds |
BS EN 60811-606:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Physical tests. Methods for determining the density |
17/30354707 DC : 0 | BS ISO 19642-2 - ROAD VEHICLES - AUTOMOTIVE CABLES - PART 2: TEST METHODS |
BS EN 60811-407:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Miscellaneous tests. Measurement of mass increase of polyethylene and polypropylene compounds |
09/30193091 DC : 0 | BS EN 60811-606 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 606: PHYSICAL TESTS - METHODS FOR DETERMINING THE DENSITY |
BS EN 60811-502:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Mechanical tests. Shrinkage test for insulations |
09/30192966 DC : DRAFT JAN 2009 | BS EN 60811-401 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 401: ENVIRONMENTAL TESTS - THERMAL AGEING METHODS - AGEING IN AN AIR OVEN |
09/30192994 DC : 0 | BS EN 60811-408 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 408: ENVIRONMENTAL TESTS - LONG TERM STABILITY TEST OF POLYETHYLENE AND POLYPROPYLENE COMPOUNDS |
NF EN 60811-512 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 512: MECHANICAL TESTS - METHODS SPECIFIC TO POLYETHYLENE AND POLYPROPYLENE COMPOUNDS - TENSILE STRENGTH AND ELONGATION AT BREAK AFTER CONDITIONING AT ELEVATED TEMPERATURE |
NF EN 60811-504 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 504: MECHANICAL TESTS - BENDING TESTS AT LOW TEMPERATURE FOR INSULATION AND SHEATHS |
EN 60811-401:2012/A1:2017 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 401: MISCELLANEOUS TESTS - THERMAL AGEING METHODS - AGEING IN AN AIR OVEN (IEC 60811-401:2012/A1:2017) |
I.S. EN 60811-513:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 513: MECHANICAL TESTS - METHODS SPECIFIC TO POLYETHYLENE AND POLYPROPYLENE COMPOUNDS - WRAPPING TEST AFTER CONDITIONING (IEC 60811-513:2012 (EQV)) |
CEI EN 60811-403 : 2014 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 403: MISCELLANEOUS TESTS - OZONE RESISTANCE TESTS ON CROSS-LINKED COMPOUNDS |
EN 60811-410:2012/A1:2017 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 410: MISCELLANEOUS TESTS - TEST METHOD FOR COPPER-CATALYZED OXIDATIVE DEGRADATION OF POLYOLEFIN INSULATED CONDUCTORS (IEC 60811-410:2012/A1:2017) |
I.S. EN 60811-410:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 410: MISCELLANEOUS TESTS - TEST METHOD FOR COPPER-CATALYZED OXIDATIVE DEGRADATION OF POLYOLEFIN INSULATED CONDUCTORS |
I.S. EN 60811-601:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 601: PHYSICAL TESTS - MEASUREMENT OF THE DROP POINT OF FILLING COMPOUNDS (IEC 60811-601:2012 (EQV)) |
CEI EN 60811-402 : 2014 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 402: MISCELLANEOUS TESTS - WATER ABSORPTION TESTS |
UNE-EN 60811-408:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 408: Miscellaneous tests - Long-term stability test of polyethylene and polypropylene compounds |
NF EN 60811-406 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 406: MISCELLANEOUS TESTS - RESISTANCE TO ENVIRONMENTAL STRESS CRACKING OF POLYETHYLENE AND POLYPROPYLENE COMPOUNDS |
UNE-EN 60811-412:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb |
NF EN 60811-402 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 402: MISCELLANEOUS TESTS - WATER ABSORPTION TESTS |
NF EN 60811-401 : 2012 AMD 1 2017 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 401: MISCELLANEOUS TESTS - THERMAL AGEING METHODS - AGEING IN AN AIR OVEN |
IEC 60811-509:2012+AMD1:2017 CSV | Electric and optical fibre cables - Test methods for non-metallic materials - Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test) |
IEC 60811-602:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 602: Physical tests - Separation of oil in filling compounds |
IEC 60811-505:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 505: Mechanical tests - Elongation at low temperature for insulations and sheaths |
IEC 60811-504:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths |
BS EN 60811-401:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Miscellaneous tests. Thermal ageing methods. Ageing in an air oven |
BS EN 60811-202:2012 | Electric and optical fibre cables. Test methods for non-metallic materials General tests. Measurement of thickness of non-metallic sheath |
NF EN 60811-602 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 602: PHYSICAL TESTS - SEPARATION OF OIL IN FILLING COMPOUNDS |
09/30193051 DC : 0 | BS EN 60811-509 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 509: MECHANICAL TESTS - TEST FOR RESISTANCE OF INSULATIONS AND SHEATHS TO CRACKING |
BS EN 60811-507:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Mechanical tests. Hot set test for cross-linked materials |
CEI EN 60811-409 : 2014 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 409: MISCELLANEOUS TESTS - LOSS OF MASS TEST FOR THERMOPLASTIC INSULATIONS AND SHEATHS |
UNE-EN 60811-507:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 507: Mechanical tests - Hot set test for cross-linked materials |
CEI EN 60811-410 : 2014 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 410: MISCELLANEOUS TESTS - TEST METHOD FOR COPPER-CATALYZED OXIDATIVE DEGRADATION OF POLYOLEFIN INSULATED CONDUCTORS |
09/30193063 DC : 0 | BS EN 60811-512 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 512: MECHANICAL TESTS - TENSILE STRENGTH AND ELONGATION AT BREAK AFTER CONDITIONING AT ELEVATED TEMPERATURE - METHODS SPECIFIC TO POLYETHYLENE AND POLYPROPYLENE COMPOUNDS |
I.S. EN 60811-501:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 501: MECHANICAL TESTS - TESTS FOR DETERMINING THE MECHANICAL PROPERTIES OF INSULATING AND SHEATHING COMPOUNDS (IEC 60811-501:2012 (EQV)) |
BS EN 60811-411:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Miscellaneous tests. Low-temperature brittleness of filling compounds |
I.S. EN 60811-201:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 201: GENERAL TESTS - MEASUREMENT OF INSULATION THICKNESS |
09/30193035 DC : 0 | BS EN 60811-506 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 506: MECHANICAL TESTS - IMPACT TEST AT LOW TEMPERATURE FOR INSULATIONS AND SHEATHS |
09/30193019 DC : 0 | BS EN 60811-502 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 502: MECHANICAL TESTS - SHRINKAGE TEST FOR INSULATIONS |
NF EN 60811-506 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 506: MECHANICAL TESTS - IMPACT TEST AT LOW TEMPERATURE FOR INSULATIONS AND SHEATHS |
I.S. EN 60811-603:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 603: PHYSICAL TESTS - MEASUREMENT OF TOTAL ACID NUMBER OF FILLING COMPOUNDS (IEC 60811-603:2012 (EQV)) |
09/30192974 DC : DRAFT JAN 2009 | BS EN 60811-403 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 403: ENVIRONMENTAL TESTS - OZONE RESISTANCE TEST ON ELASTOMERIC COMPOUNDS |
BS EN 60811-513:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Mechanical tests. Methods specific to polyethylene and polypropylene compounds. Wrapping test after conditioning |
I.S. EN 60811-301:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 301: ELECTRICAL TESTS - MEASUREMENT OF THE PERMITTIVITY AT 23 DEGREES C OF FILLING COMPOUNDS (IEC 60811-301:2012 (EQV)) |
09/30193067 DC : 0 | BS EN 60811-513 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 513: MECHANICAL TESTS - METHODS SPECIFIC TO POLYETHYLENE AND POLYPROPYLENE COMPOUNDS - WRAPPING TEST AFTER CONDITIONING |
BS EN 60811-504:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Mechanical tests. Bending tests at low temperature for insulation and sheaths |
NF EN 60811-203 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 203: GENERAL TESTS - MEASUREMENT OF OVERALL DIMENSIONS |
UNE-EN 60811-302:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 302: Electrical tests - Measurement of the d.c. resistivity at 23 °C and 100 °C of filling compounds |
UNE-EN 60811-604:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds |
UNE-EN 60811-506:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 506: Mechanical tests - Impact test at low temperature for insulations and sheaths |
09/30192947 DC : DRAFT JAN 2009 | BS EN 60811-202 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 202: GENERAL TESTS - MEASUREMENT OF THICKNESS OF NON-METALLIC SHEATH |
09/30193015 DC : 0 | BS EN 60811-501 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 501: MECHANICAL TESTS - TESTS FOR DETERMINING THE MECHANICAL PROPERTIES OF INSULATING AND SHEATHING COMPOUNDS |
NF EN 60811-505 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 505: MECHANICAL TESTS - ELONGATION AT LOW TEMPERATURE FOR INSULATIONS AND SHEATHS |
UNE-EN 60811-603:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 603: Physical tests - Measurement of total acid number of filling compounds |
I.S. EN 60811-504:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 504: MECHANICAL TESTS - BENDING TESTS AT LOW TEMPERATURE FOR INSULATION AND SHEATHS (IEC 60811-504:2012 (EQV)) |
UNE-EN 60811-402:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 402: Miscellaneous tests - Water absorption tests |
NF EN 60811-603 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 603: PHYSICAL TESTS - MEASUREMENT OF TOTAL ACID NUMBER OF FILLING COMPOUNDS |
NF EN 60811-410 : 2012 AMD 1 2017 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 410: MISCELLANEOUS TESTS - TEST METHOD FOR COPPER-CATALYZED OXIDATIVE DEGRADATION OF POLYOLEFIN INSULATED CONDUCTORS |
I.S. EN 60811-606:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 606: PHYSICAL TESTS - METHODS FOR DETERMINING THE DENSITY (IEC 60811-606:2012 (EQV)) |
UNE-EN 60811-405:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 405: Miscellaneous tests - Thermal stability test for PVC insulations and PVC sheaths |
I.S. EN 60811-607:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 607: PHYSICAL TESTS - TEST FOR THE ASSESSMENT OF CARBON BLACK DISPERSION IN POLYETHYLENE AND POLYPROPYLENE (IEC 60811-607:2012 (EQV)) |
EN 60811-511:2012/A1:2017 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene and polypropylene compounds |
NF EN 60811-604 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 604: PHYSICAL TESTS - MEASUREMENT OF ABSENCE OF CORROSIVE COMPONENTS IN FILLING COMPOUNDS |
UNE-EN 60811-502:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: Mechanical tests - Shrinkage test for insulations |
I.S. EN 60811-605:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 605: PHYSICAL TESTS - MEASUREMENT OF CARBON BLACK AND/OR MINERAL FILLER IN POLYETHYLENE COMPOUNDS (IEC 60811-605:2012 (EQV)) |
I.S. EN 60811-401:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 401: MISCELLANEOUS TESTS - THERMAL AGEING METHODS - AGEING IN AN AIR OVEN |
NF EN 60811-302 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 302: ELECTRICAL TESTS - MEASUREMENT OF THE D.C. RESISTIVITY AT 23 DEGREES C AND 100 DEGREES C OF FILLING COMPOUNDS |
CEI EN 60811-407 : 2014 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 407: MISCELLANEOUS TESTS - MEASUREMENT OF MASS INCREASE OF POLYETHYLENE AND POLYPROPYLENE COMPOUNDS |
I.S. EN 60811-202:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 202: GENERAL TESTS - MEASUREMENT OF THICKNESS OF NON-METALLIC SHEATH |
I.S. EN 60811-506:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 506: MECHANICAL TESTS - IMPACT TEST AT LOW TEMPERATURE FOR INSULATIONS AND SHEATHS (IEC 60811-506:2012 (EQV)) |
CEI EN 60811-404 : 2014 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 404: MISCELLANEOUS TESTS - MINERAL OIL IMMERSION TESTS FOR SHEATHS |
NF EN 60811-409 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 409: MISCELLANEOUS TESTS - LOSS OF MASS TEST FOR THERMOPLASTIC INSULATIONS AND SHEATHS |
CEI EN 60811-411 : 2014 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 411: MISCELLANEOUS TESTS - LOW TEMPERATURE BRITTLENESS OF FILLING COMPOUNDS |
IEC 60811-512:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 512: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature |
IEC 60811-203:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions |
IEC 60811-604:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds |
IEC 60811-607:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 607: Physical tests - Test for the assessment of carbon black dispersion in polyethylene and polypropylene |
IEC 60811-501:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds |
IEC 60811-605:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 605: Physical tests - Measurement of carbon black and/or mineral filler in polyethylene compounds |
IEC 60811-606:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 606: Physical tests - Methods for determining the density |
IEC 60811-408:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 408: Miscellaneous tests - Long-term stability test of polyethylene and polypropylene compounds |
IEC 60811-401:2012+AMD1:2017 CSV | Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven |
IEC 60811-301:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 301: Electrical tests - Measurement of the permittivity at 23 °C of filling compounds |
IEC 60811-201:2012+AMD1:2017 CSV | Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness |
IEC 60811-407:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds |
UNE-EN 60811-201:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness |
IEC 60811-601:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 601: Physical tests - Measurement of the drop point of filling compounds |
IEC 60811-202:2012+AMD1:2017 CSV | Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath |
IEC 60811-507:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 507: Mechanical tests - Hot set test for cross-linked materials |
IEC 60811-405:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 405: Miscellaneous tests - Thermal stability test for PVC insulations and PVC sheaths |
IEC 60811-409:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths |
IEC 60811-511:2012+AMD1:2017 CSV | Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene and polypropylene compounds |
UNE-EN 60811-202:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath |
UNE-EN 60811-410:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors |
IEC 60811-411:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 411: Miscellaneous tests - Low-temperature brittleness of filling compounds |
UNE-EN 60811-509:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test) |
IEC 60811-403:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 403: Miscellaneous tests - Ozone resistance test on cross-linked compounds |
IEC 60811-513:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 513: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after conditioning |
IEC 60811-410:2012+AMD1:2017 CSV | Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors |
IEC 60811-412:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb |
IEC 60811-402:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 402: Miscellaneous tests - Water absorption tests |
IEC 60811-502:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: Mechanical tests - Shrinkage test for insulations |
UNE-EN 60811-401:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven |
IEC 60811-508:2012+AMD1:2017 CSV | Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths |
UNE-EN 60811-508:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths |
UNE-EN 60811-511:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene compounds |
IEC 60811-404:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 404: Miscellaneous tests - Mineral oil immersion tests for sheaths |
IEC 60811-302:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 302: Electrical tests - Measurement of the d.c. resistivity at 23 °C and 100 °C of filling compounds |
IEC 60811-503:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 503: Mechanical tests - Shrinkage test for sheaths |
UNE-EN 60811-403:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 403: Miscellaneous tests - Ozone resistance test on cross-linked compounds |
09/30193023 DC : 0 | BS EN 60811-503 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 503: MECHANICAL TESTS - SHRINKAGE TEST FOR SHEATHS |
I.S. EN 60811-509:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 509: MECHANICAL TESTS - TEST FOR RESISTANCE OF INSULATIONS AND SHEATHS TO CRACKING (HEAT SHOCK TEST) |
09/30192970 DC : DRAFT JAN 2009 | BS EN 60811-402 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 402: ENVIRONMENTAL TESTS - WATER ABSORPTION TESTS |
BS EN 60811-505:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Mechanical tests. Elongation at low temperature for insulations and sheaths |
CEI EN 60811-406 : 2014 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 406: MISCELLANEOUS TESTS - RESISTANCE TO STRESS CRACKING OF POLYETHYLENE AND POLYPROPYLENE COMPOUNDS |
09/30192982 DC : DRAFT JAN 2009 | BS EN 60811-405 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 405: ENVIRONMENTAL TESTS - THERMAL STABILITY TEST FOR PVC INSULATIONS AND PVC SHEATHS |
BS EN 60811-406:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Miscellaneous tests. Resistance to stress cracking of polyethylene and polypropylene compounds |
BS EN 60811-301:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Electrical tests. Measurement of the permittivity at 23°C of filling compounds |
UNE-EN 60811-301:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 301: Electrical tests - Measurement of the permittivity at 23 °C of filling compounds |
UNE-EN 60811-504:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths |
NF EN 60811-201 : 2012 AMD 1 2017 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 201: GENERAL TESTS - MEASUREMENT OF INSULATION THICKNESS |
NF EN 60811-411 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 411: MISCELLANEOUS TESTS - LOW TEMPERATURE BRITTLENESS OF FILLING COMPOUNDS |
UNE-EN 60811-607:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 607: Physical tests - Test for the assessment of carbon black dispersion in polyethylene and polypropylene |
UNE-EN 50289-4-17:2016 | Communication cables - Specifications for test methods - Part 4-17: Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable |
09/30193083 DC : 0 | BS EN 60811-604 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 604: PHYSICAL TESTS - MEASUREMENT OF ABSENCE OF CORROSIVE COMPONENTS IN FILLING COMPOUNDS |
09/30193002 DC : 0 | BS EN 60811-410 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 410: ENVIRONMENTAL TESTS - TEST METHOD FOR COPPER-CATALYZED OXIDATIVE DEGRADATION OF POLYOLEFIN INSULATED CONDUCTORS |
09/30193087 DC : 0 | BS EN 60811-605 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 605: PHYSICAL TESTS - MEASUREMENT OF CARBON BLACK AND/OR MINERAL FILLER IN POLYETHYLENE COMPOUNDS |
NF EN 60811-607 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 607: PHYSICAL TESTS - TEST FOR THE ASSESSMENT OF CARBON BLACK DISPERSION IN POLYETHYLENE AND POLYPROPYLENE |
UNE-EN 60811-411:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 411: Miscellaneous tests - Low-temperature brittleness of filling compounds |
UNE-EN 60811-512:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 512: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature |
UNE-EN 60811-513:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 513: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after conditioning |
I.S. EN 60811-508:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 508: MECHANICAL TESTS - PRESSURE TEST AT HIGH TEMPERATURE FOR INSULATION AND SHEATHS |
I.S. EN 60811-412:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 412: MISCELLANEOUS TESTS - THERMAL AGEING METHODS - AGEING IN AN AIR BOMB (IEC 60811-412:2012 (EQV)) |
UNE-EN 60811-605:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 605: Physical tests - Measurement of carbon black and/or mineral filler in polyethylene compounds |
NF EN 60811-403 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 403: MISCELLANEOUS TESTS - OZONE RESISTANCE TEST ON CROSS-LINKED COMPOUNDS |
UNE-EN 60811-510:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 510: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after thermal ageing in air |
NF EN 60811-509 : 2012 AMD 1 2017 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 509: MECHANICAL TESTS - TEST FOR RESISTANCE OF INSULATIONS AND SHEATHS TO CRACKING (HEAT SHOCK TEST) |
IEC 60811-406:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 406: Miscellaneous tests - Resistance to stress cracking of polyethylene and polypropylene compounds |
EN 60811-412:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb |
EN 60811-405:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 405: Miscellaneous tests - Thermal stability test for PVC insulations and PVC sheaths |
EN 60811-510:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 510: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after thermal ageing in air |
EN 60811-403:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 403: Miscellaneous tests - Ozone resistance test on cross-linked compounds |
EN 60811-607:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 607: Physical tests - Test for the assessment of carbon black dispersion in polyethylene and polypropylene |
EN 60811-504:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths |
EN 60811-502 : 2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: Mechanical tests - Shrinkage test for insulations |
EN 60811-301:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 301: Electrical tests - Measurement of the permittivity at 23 °C of filling compounds |
EN 60811-604:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds |
EN 60811-603:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 603: Physical tests - Measurement of total acid number of filling compounds |
EN 60811-503:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 503: Mechanical tests - Shrinkage test for sheaths |
EN 60811-411 : 2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 411: Miscellaneous tests - Low-temperature brittleness of filling compounds |
EN 60811-407:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds |
EN 60811-602:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 602: Physical tests - Separation of oil in filling compounds |
EN 60811-302 : 2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 302: Electrical tests - Measurement of the d.c. resistivity at 23 °C and 100 °C of filling compounds |
EN 60811-507 : 2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 507: Mechanical tests - Hot set test for cross-linked materials |
EN 60811-406:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 406: Miscellaneous tests - Resistance to stress cracking of polyethylene and polypropylene compounds |
EN 60811-601:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 601: Physical tests - Measurement of the drop point of filling compounds |
EN 60811-408:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 408: Miscellaneous tests - Long-term stability test of polyethylene and polypropylene compounds |
EN 60811-409:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths |
IEC 60502-1:2004+AMD1:2009 CSV | Power cables with extruded insulation and their accessories for rated voltages from 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) up to 30 kV(<em>U</em><sub>m</sub> = 36 kV) - Part 1: Cables for rated voltages of 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) and 3 kV (<em>U</em><sub>m</sub> = 3,6 kV) |
IEC 60050-461:2008 | International Electrotechnical Vocabulary (IEV) - Part 461: Electric cables |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.