IEC 60876-1:2014
Current
The latest, up-to-date edition.
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English - French
08-22-2014
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
Annex A (informative) - Example of magneto-optic
effect (MO) switch technologies
Annex B (informative) - Example of mechanical switch
technologies
Annex C (informative) - Example of micro-electromechanical
system (MEMS) switch technologies
Annex D (informative) - Example of thermo-optic effect
(TO) technologies
Annex E (informative) - Summary of definitions on switching
time
Bibliography
IEC 60876-1:2014 applies to fibre optic switches possessing all of the following general features:
- they are passive in that they contain no optoelectronic or other transducing elements;
- they have one or more ports for the transmission of optical power and two or more states in which power may be routed or blocked between these ports;
- the ports are optical fibres or fibre optic connectors. This fifth edition cancels and replaces the fourth edition that was published in 2012 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- addition of definitions for the terms for "normally-on;
- "normally-off" and "crosstalk";
- addition of a new Annex E. Keywords: fibre optic switches, transmission of optical power, fibre optic connectors
Committee |
TC 86/SC 86B
|
DevelopmentNote |
Stability date: 2024. (08/2014)
|
DocumentType |
Standard
|
Pages |
70
|
PublisherName |
International Electrotechnical Committee
|
Status |
Current
|
Supersedes |
Standards | Relationship |
NF EN 60876-1 : 2014 | Identical |
NEN EN IEC 60876-1 : 2014 | Identical |
PN EN 60876-1 : 2015 | Identical |
BS EN 60876-1:2014 | Identical |
UNE-EN 60876-1:2014 | Identical |
EN 60876-1:2014 | Identical |
CEI EN 60876-1 : 2015 | Identical |
SN EN 60876-1:2014 | Identical |
DIN EN 60876-1 : 2015 | Identical |
VDE 0885-876-1 : 2015 | Identical |
BS EN 61753-071-2:2014 | Fibre optic interconnecting devices and passive components. Performance standard Non-connectorised single-mode fibre optic 1 x 2 and 2 x 2 spatial switches for category C. Controlled environments |
BS EN 61300-3-50:2013 | Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Examinations and measurements. Crosstalk for optical spatial switches |
17/30350665 DC : 0 | BS EN 61300-3-21 ED.3.0 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-21: EXAMINATIONS AND MEASUREMENTS - SWITCHING TIME |
95/209463 DC : DRAFT JULY 1995 | IEC 86/87/CDV-1 AND CDV-2 - FIBER OPTIC TERMINOLOGY |
11/30256039 DC : 0 | BS EN 61300-3-50 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-50: EXAMINATIONS AND MEASUREMENTS - CROSSTALK FOR OPTICAL SPATIAL SWITCHES |
BS EN 61300-3-21:2015 | Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Examinations and measurements. Switching time |
ISO 20780:2018 | Space systems — Fiber optic components — Design and verification requirements |
EN 62343-3-3:2014 | Dynamic modules - Part 3-3: Performance specification templates - Wavelength selective switches |
PD IEC TR 61282-1:2000 | Fibre optic communication system design guides Single-mode digital and analogue systems |
BS EN 62343-3-3:2014 | Dynamic modules Performance specification templates. Wavelength selective switches |
BS IEC 61300-3-21 : 2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-21: EXAMINATIONS AND MEASUREMENTS - SWITCHING TIME |
I.S. EN 61753-071-2:2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 071-2: NON-CONNECTORIZED SINGLE-MODE FIBRE OPTIC 1 X 2 AND 2 X 2 SPATIAL SWITCHES FOR CATEGORY C - CONTROLLED ENVIRONMENTS |
IEC 63032:2018 | Fibre optic interconnecting devices and passive components - Fibre optic tuneable bandpass filters - Generic specification |
12/30266888 DC : 0 | BS EN 61300-3-21 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-21: EXAMINATIONS AND MEASUREMENTS - SWITCHING TIME |
BS EN IEC 61281-1:2018 | Fibre optic communication subsystems Generic specification |
EN 61753-071-2:2014 | Fibre optic interconnecting devices and passive components - Performance standard - Part 071-2: Non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial switches for category C - Controlled environments |
17/30352108 DC : 0 | BS EN 62343-3-4 - DYNAMIC MODULES - PART 3-4: PERFORMANCE SPECIFICATION TEMPLATES - MULTICAST OPTICAL SWITCHES |
EN IEC 61281-1:2018 | Fibre optic communication subsystems - Part 1: Generic specification |
CEI EN 61300-3-50 : 2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-50: EXAMINATIONS AND MEASUREMENTS - CROSSTALK FOR OPTICAL SPATIAL SWITCHES |
IEC 61300-3-21:2014 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements - Switching time |
IEC 61753-071-2:2014 | Fibre optic interconnecting devices and passive components - Performance standard - Part 071-2: Non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial switches for category C - Controlled environments |
I.S. EN IEC 61281-1:2018 | FIBRE OPTIC COMMUNICATION SUBSYSTEMS - PART 1: GENERIC SPECIFICATION |
13/30277930 DC : 0 | BS EN 62343-3-3 ED 1.0 - DYNAMIC MODULES - PERFORMANCE SPECIFICATION TEMPLATES - PART 3-3: WAVELENGTH SELECTIVE SWITCHES |
11/30219060 DC : 0 | BS EN 61753-071-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 071-2: NON-CONNECTORISED SINGLE-MODE FIBRE OPTIC 1 X 2 AND 2 X 2 SPATIAL SWITCHES FOR CATEGORY C - CONTROLLED ENVIRONMENTS |
IEC TR 61282-1:2000 | Fibre optic communication system design guides - Part 1: Single-mode digital and analogue systems |
I.S. EN 61300-3-50:2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-50: EXAMINATIONS AND MEASUREMENTS - CROSSTALK FOR OPTICAL SPATIAL SWITCHES (IEC 61300-3-50:2013 (EQV)) |
I.S. EN 61300-3-21:2015 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-21: EXAMINATIONS AND MEASUREMENTS - SWITCHING TIME |
I.S. EN 62343-3-3:2014 | DYNAMIC MODULES - PART 3-3: PERFORMANCE SPECIFICATION TEMPLATES - WAVELENGTH SELECTIVE SWITCHES |
IEC 61281-1:2017 | Fibre optic communication subsystems - Part 1: Generic specification |
EN 61300-3-50:2013/AC:2015 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-50: EXAMINATIONS AND MEASUREMENTS - CROSSTALK FOR OPTICAL SPATIAL SWITCHES (IEC 61300-3-50:2013) |
EN 61300-3-21:2015 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements - Switching time |
IEC 60050-731:1991 | International Electrotechnical Vocabulary (IEV) - Part 731: Optical fibre communication |
ISO 1101:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
IEC 60869-1:2012 | Fibre optic interconnecting devices and passive components - Fibre optic passive power control devices - Part 1: Generic specification |
IEC 60825-1:2014 | Safety of laser products - Part 1: Equipment classification and requirements |
IEC 60410:1973 | Sampling plans and procedures for inspection by attributes |
IEC TR 61930:1998 | Fibre optic graphical symbology |
IEC 62047-1:2016 | Semiconductor devices - Micro-electromechanical devices - Part 1: Terms and definitions |
IEC GUIDE 102:1996 | Electronic components - Specification structures for qualityassessment (Qualification approval and capability approval) |
ISO 8601:2004 | Data elements and interchange formats Information interchange Representation of dates and times |
ISO 286-1:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits |
IEC 61073-1:2009 | Fibre optic interconnecting devices and passive components - Mechanical splices and fusion splice protectors for optical fibres and cables - Part 1: Generic specification |
ISO 129-1:2004 | Technical drawings Indication of dimensions and tolerances Part 1: General principles |
IEC 60695-11-5 : 2.0 | FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE |
IEC 60695-11-5:2016 | Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.